FTP problems and printer network in windows 7

Similar Questions

• How to write a letter and print it using Windows XP

  How to activate the programs that will allow me to write and print letters

  Windows comes with several.

  How to use wordpad: http://www.ehow.com/how_5726466_use-xp-basic-word-processing.html (after's done it, make sure that a printer is connected to your PC, then open the document and press Ctrl + P on your keyboard and click OK to print the file)

  Office Online (free, online version of MS Office): http://office.microsoft.com/en-us/web-apps

• Need to format the drive due to some problems and having to reinstall Windows 7. I could use the same product key

  Original title: Windows 7

  I am using Windows 7 Home Premium 64-bit SP 1 that have previously been installed then bought my laptop. Product key number is fixed under the laptop.

  I need to format my drive due to some problems and having to reinstall Windows 7. can I use the same product key and where can I get the installer of Windows 7 because I don't have it.

  Thank you

  New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For LG, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  For Samsung, press F4 to the power upward...

  For Fujitsu, press the F8 key directly after the power

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• Connect the printer network of windows 7 for XP

  After select printer finds he cannot find printer driver fothen I click search manually, I need to know where the specific drivers for windows 7 looking for deskjet 5550 drivers which is load in windows, I have isntalled the printer on this workstation to be sure it was the drivers, HP printer uses the name of the different driver than the name of the printer?

  Hi Vegasshadows,

  Welcome to the Windows 7 community!

  From your problem description, I understand that you can not connect to the network from Windows 7 to Windows XP printer. I take this opportunity to help you.

  I suggest the following methods and check if it helps to solve the problem.

   

  Method 1: Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

   

  Method 2: Find and install printer drivers in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  For any further assistance, I suggest you to contact HP printer Support.

  Here is the link: http://www8.hp.com/us/en/support-drivers.html

  You can also check out the links below in case if you have other problems with the printer.

  Printer in Windows problems: http://windows.microsoft.com/en-US/windows/help/printer-problems-in-windows

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

   

   

  Kind regards!

• File sharing and print with XP - Windows 7

  Is it possible to share files and a printer with 1 under Windows 7 Home Premium desktop computer connected to a router and 1 laptop running Windows Xp (wireless) connected to the router (wired). and 1 printer connected to the desktop computer?

  I know that Windows 7 made workgroups can I still share with 2 different OS?

  Yes, it is possible.  These pages show how do:

  Sharing files and printers with different versions of Windows
  Networking of computers running different versions of Windows
  Share files and printers between Windows 7 and XP Boulder computer Maven  
  Most Microsoft Valuable Professional

• Problem installing printer HP new Windows 8.1

  Hello

  I have a printer HP Officejet 5610 printer I used quite happy with my new HP laptop which came with Windows 8, and then on the advice, I've upgraded to 8.1 Win.  Use this combo since February this year with no problems.

  This morning running the printer and started getting printer 'offline' when attampting to print.  Tried troubleshooting by using HP Web sites (including this forum where I found a thread about the mistake of the printer 'offline').  The final recommendation recommended re - install tried as long as.   It appears the togo through the uninstall & then install for this printer, but after a long while I get an error message telling me "fatal error." and the installation is aborted (i.e. reversed out)

  Are leaning on what is still connected to my laptop and, curiously, the fax for this printer is listed but not the printer.

  Don't know if this can help, but the HP error log...

  • Location code: 09864322.  Error opening key error - HKLM\software\hewlett-packard\install\{6F5B70F0-EA6C-4A5B-BB16-8390BD66B251} = 2.  Exit code = 87

  I spent almost today so far of evil with this & ideas now.

  Can someone help?

  Hello again, kean,

  Welcome to the HP Forums.

  I see you have some connectivity issues when you try to print from your computer Windows 8.1 update.

  I have some suggestions that in order to solve this problem, we can try.

  Click on the first link which explains the uninstall of the printer software.  Windows 8.1 is NOT listed in the instructions, but the instructions of Windows 8 will work the same way.

  Software has been removed, restart the computer.  When the computer is back up and running, please do a search for the fax and the printer and make sure that everything has been removed.

  The next step would be to reinstall the software and drivers. Click on the following link for HP Deskjet and Officejet full feature software and drivers.  Save the download on your computer desktop so it creates it's own icon.  This will make it easy to find download.  Double-click on the icon and follow the installation instructions.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thank you for your time.

  See you soon,.

• Problem adding printer IPP client windows 7

  In the previous version of windows up to xp, I was able to add a printer that uses IPP (Internet Printing Protocol) printing. Unfortunately with windows 7, I was unsuccessful.  I tried to add printing using the APW > add a network > add a printer shared by name > and used http://xx.xx.xxx.xxx:631 / address and all acquire them in return is error «Windows could not connect to the printer...» ».  I am still able to connect through XP very well.  I also tried I tried to create a port local using this address, but all happens it is an error message, "invalid port name" help please

  Hello

  Follow these steps and check if it works:

  1. open devices and printers, click the Start button, and then click the start menu, click devices and printers.

  2. click on add a printer.

  3. in the Add Printer Wizard, click Add a network, wireless or Bluetooth printer.

  4. in the list of available printers, select the one you want to use, and then click Next. (If your computer is connected to a network, only printers listed in Active Directory for your domain are displayed in the list).

  5. If prompted, install the printer driver on your computer by clicking on install driver.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  6. follow the steps in the wizard and then click Finish.

  See this links to learn more about adding a printer.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network
  http://Windows.Microsoft.com/en-us/Windows7/what-is-a-trusted-device
  http://support.Microsoft.com/kb/941542

  Kind regards

  Jackson.

• remove a printer networked to Windows 8

  Wireless printer - HP Photosmart C310, running. Feeder gear is no longer mesh.

  Home network - two Windows 8, Windows 7 - two portable computers and one office.

  What is the recommended procedure to remove my C310 printer all three systems?

  Is there a recommended order to remove and install a series of replacement HP 7520?

  With the C310, I used a static IP address to inhibit its propensity to drop offline. A static address is recommended for the 7520 series?

  Thank you

  Steve255

  Hi @SteveKFF,

  Welcome to the Forums of HP Support! I see you want to uninstall your HP Photosmart C310 software and drivers on the PC 3 and reinstall your HP Photosmart 7520 with an IP address static to keep the wireless connection. I can certainly help you with this. Start below:

  Once on the page, select your operating system from the list and proceed with the instructions to uninstall the program:

  Uninstalling the printer software

  Now we can go ahead and install your PS 7520:

  Installation of the software of the printer for a wireless network connection

  Once you have correctly installed your PS 7520, before setting a static IP address, I could wait a few days and see the wireless connection is reliable, you may not feel the need to create one with the newer model printer. However if you decide you want to set on if please click the link below and scroll up to ' step seven: assign the printer an IP address:

  Printer keeps no connection Wi - Fi

  I hope this helps, if you have any questions do not hesitate to ask!

  Thank you

• I can't print my epson stylus c86 Windows 7 and a network in Windows xp

  I am running XP on a PC with a Epson Stylus C86 connects to the LPT1 port. When I try to print from my laptop running Windows 7, it seems to send the document to the printer, but the printer errors. Any ideas?

  Fixed it now. Had to delete the printer, then add printer and search for a network printer.

  Someone showed me how to do that was the problem themselves

• Printer network under Windows 8.1

  My works Photosmart 4280 old fine with wondows 8.1 through the forum, but having managed to do work with windows 8.1 my other two computers running windows 7 and are wireless will not contact the Photosmart windows 8.1 computer connected by usb. I have the tested network and file sharing, and type of work. I had the controls themselves, made for sharing the printer on all computers. The printer worked fine on the network until I installed windows 8.1. Any help would be appreciated... Thank you.

  Generally, your client machine must use a driver that is compatible with the host computer. Because your host is windows 8.1, your drivers are for windows 8.1, so the previous drivers signal may be different and will not work. Network printing is horrible and has always been. What you can try, deletes the printer completely from your windows machines drivers 7, and there is a configuration of sharing on your machine 8.1, which allows you to specify that drivers can be used, so that you can use older drivers on machines that cannot use the new printer. Once it is setup, you should be able to connect to the printer and windows 7 will get the drivers that are defined in your printer sharing - and then it should work.

  It's very high level and I him did not for a few years as all my printers are wireless now, but I hope this helps.

• Dr Watson postmortem debugger has encountered a problem and stop windows...

  "Dr. Watson postmortem debugger has encountered a problem and needs to close windows," not only tries to close windows... it freezes. This forces me to shut down or restart the computer through Task Manager.

  This happens when I try to open JPEG with the default windows, program files in a specific folder. The program (in 32 XP sp3) is apparently photo and fax viewer winFX. When the debugger initiates its closure, he tries to send an error report. Within the error of the report data file specifies a "appcompat' divergence. This leads me to believe that there is a compatibility issue somewhere for this folder. (This folder contains several folders of JPEG files and a few vids). 

  I am able to view pictures of other files, in quicktime, Viewer , but the underlying problem remains with the default veiwer and this specific folder.

  Also, I'm not sure if it is independent, but when you try to view video files, they are scrambled and the sound stutters... even with quicktime player.   It's a difficult question because; Here are pictures of family and vids I am trying to display and modify.

  I hope there, can someone help me diagnose the root problem and the default player of this folder. Otherwise, I changed the options files to open the JPEG files and video in quicktime. However, I prefer to fix the original problem, rather than simply "he sweep it under the rug." Plus I need to access the above JPEG file and vids, with PC crashing every time.

  Thank you for your time and your consideration for reading this post and tryng to help me find a solution.

  OK guys, I kind of answered my own question.

  By publishing this response, I hope that I can help someone else "self-diagnose" similar problems.

  I was able to right-click on the file and copy it to a USB key. Then I downloaded the folder of JPEGs and videos to another computer. I was able to open all folders and files (using Windows Media Player Quicktime) without problem. This tells me that the laptop I took the files of do have enough RAM to see to many files at once. Apparently the folder content on data 3Gigs, the laptop has only 894MB RAM.

  It seems that there is a new project in the future lol, laptops. On that same note, I installed 4 GB of RAM (1 x 4) on the desktop, (the same Office I opened media files with) and made improved DRAMATICALLY (from the 256 MB x 2). This office is a dinosaur, but I'm happy to have made this update... it's a lot cheaper than the buy-in of a newer pc, and he cares about today's computing needs.

  Do not forget to check with the service manual for your PC, to determine the maximum amount of RAM it can handle.  Install it, or have a qualified technician to do if you do not trust your capabilities. You'll be glad you did.

  I'll do the same for the laptop and report back with my progress and results. I hope that I will be able to open those multimedia files on the laptop after upgrading RAM. It would be nice to be able to modify multimedia files on the go.

  Thanks to all those who read this post

• Cannot identify the network under Windows Vista

  I have windows vista SP2 and cannot connect to internet.  I see networks, but the computer is not able to identify.  I tried with several different networks, and the result is the same.

  Hi ClarkHayes,

  1. What is the error exact message you when you try to connect?

  I suggest you try the steps from the following link and see if that helps.

  In the Windows wireless network connection problems
  http://Windows.Microsoft.com/en-in/Windows/help/wireless-network-connection-problems-in-Windows?T1=tab04

  Solve problems, find wireless networks
  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-finding-wireless-networks

• Skype says he has encountered a problem and closes immediately

  Skype says he has encountered a problem and closes immediately.  Windows is looking for the solution?  What should I do to get Skype to work?

  Original title: network programs network networking Internet Web site Site Web Web Site URL

  The following support Skype can help:

  http://support.Skype.com/en-us/FAQ/FA10634/how-can-I-completely-uninstall-and-then-reinstall-Skype

  http://support.Skype.com/en-us/FAQ/FA10382/why-does-Skype-crash-on-my-computer

  If those who do not help, Skype has its own forum that may be useful: http://community.skype.com/t5/English/ct-p/English?profile.language=en

• Wake mode and intermodality network

  Hp110e is on the network. Auto power off is disabled. PowerSaving is located to 15 minutes. If the printer is in

  the powersaving mode and I send a print job should he wake up and print? A Windows 7 pc, the other is

  Windows 8. Is it OK to leave always powersavings mode?

  Hi DaleFiorillo,

  Yes, the printer must wake up and realize the print job.  It's OK to let in power saving Mode.  Let me know if you have any other questions?  If you do, is your printer a Photosmart B110F?

• wet7xp_x86.exe fails with % 1 has encountered a problem and needs to close.

  I'm trying to run wet7xp_x86.exe to save my settings in XP. I downloaded the exe to the desktop and after a few seconds running accept terms screen is shown but then the error "% 1 has encountered a problem and needs to close" windows arrives? I am unable to get the wet program. Does anyone have a solution to this problem?

  have you downloaded the right version? 32 or 64 bit?

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=4503

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

  First read the above link