Wake mode and intermodality network

Similar Questions

• NEED HELP WITH SERVICE PACK 3. After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. ,

  NEED HELP WITH SERVICE PACK 3.  After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. , but it of although he gets, he keeps countdown to restart and reboots and restarts, over and over again, never reboots, same screen. my computer won't let me out this screen even after I turned off the computer and turn it back on, I get the same screen. the only way I can get out of this is to erase my computer everything and bring it back to factory, right out of the box, this big headaches. Thanks for anyone who can help me. PS. Keep the answers in simple terms please.

  Hi BSRC$, in stock

  1. You have security software installed on the computer?
  2. You receive an error message when you restart the computer?

  Reinstalling Windows XP to the factory setting would not be the first option.

  It is possible that some third-party programs or the services installed on the computer interfere with the installation of service pack 3.

  I suggest that you try to uninstall service pack 3 from the computer by using the recovery console and subsequently ask the article below for what to do before installing the service pack 3on the computer.

  How to remove Windows XP Service Pack 3 from your computer

  http://support.Microsoft.com/kb/950249

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

• my system does not start upwards - don't stop progression blue bar that goes round and round. I can boot into safe mode and safe mode with networking mode.

  my system does not start upwards - don't stop progression blue bar that goes round and round.  I can boot into safe mode and safe mode with networking mode.

  Hello

  As you are able to boot to the desktop in Mode safe, it means that the third-party application prevents the computer from starting in normal mode. To check you can configure the computer to clean start State and then try to boot into normal mode and check what is happening. To set up its own start-up follow the link below.

  http://support.Microsoft.com/kb/310353

  If the problem does not continues when the computer is in the clean start State follow the steps listed to identify which application is causing the problem.

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista desk top of page monitor screen remains black when the computer wakes mode standby

  Windows Vista Edition Home Premium

  Dell desktop

  Intel Q8200 @2.33 GHz processor

  6.00 GB RAM

  32-bit operating system

  Type of card ATI Radeon HD 3450

  Driver update has been installed without any problems.

  When my desk top comes out of fashion 'sleep' (using the mouse click), I hear my computer turns (beeps once and can hear the hard drive and fan), but can not get the screen on the monitor to display (rest is black). Can only crash the system to get everything back to normal. I searched in internet and microsoft forums but didn't find a solution. Please help, it seems that many others also have this problem without solution. I like to use "sleep" mode and do not want to resort to turning off the sleep mode option.

  Hello

  Please provide information for a better understanding of the issue.

  1. what was the recent change in hardware or software performed on the computer before the question?

  2. are you having the same problem when you Hibernate the computer?

  Check the display driver for power management problems.

  Method 1

  Check if allow this device to wake the computer is checked in the Device Manager.

  a. click Start, type Device Manager in the start search box and press ENTER.

  b. Select graphics cards, it will display your display driver, right click and select Properties.

  c. Select the power management tab.

  d. check the allow this device to wake the computer check box.

  e. repeat these steps for the network adapters and the mouse as well.

  If the problem is not solved then continue to.

  Method 2

  Remove both power on your computer and check to see if that fixes the problem.

  Reference:

  Change, create, or delete a power plan (scheme)

  Try to create another plan of the power of your computer and check if the problem persists.

  Power plans: frequently asked questions

  See also (additional links for more information),

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blank-screen-after-Vista-went-on-sleep-mode/b5e5693a-28a6-4391-b9ac-36d345d6a3b9?msgId=a464f2ec-0651-4E2F-8CB0-f546b09b0989

  Hope this helps

• Satellite A200-238 - no wake mode from 'sleep'

  Hi all

  When my laptop goes to sleep automatticly or 'forced', when I push the power button, it won't wake up.
  I normally just push the powerbutton 1 time and he wakes up, but now its no longer works.

  I shut down the pc by pressing the powerbuton for a few seconds.
  I can't reinstall is the solution easy, but with all my data on it its not so easy to transfer everything.
  So im wondering if there is any other way. The device is a satellite A200-238 (vista).
  The mobo is the 1.00 ILHAM with bios V2.00.

  Thanks in advance

  Hello

  As I understand your problem, your notebook screen remains black and not wake mode hibernation or standby.

  Well, buddy, I think I have good news for you the OS reinstallation is not necessary (as I m wrong completely ;)).

  I see you are using the old BIOS.
  So to my knowledge the BIOS update should help you resolve this annoying problem.

  Check it out ;)

  Good bye

• HP DV6 Envy: My desire to HP dv6 wake mode 'sleep'

  I've had this computer for a long time, and he was never able to wake mode "Eve".  I tried all the things in the help file, and nothing works.  The keyboard is activated. all updates have been installed.  When he sleeps, the only thing I can do is to restart.  It has been 1 day.  With all my previous laptops, I started it with the lid closed to get everthing charge while I'm doing something else.  I can't do it with this computer.  It was a minor annoyance and I finally decided to find out what was wrong.

  Hi there @pattiwagen
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you are having problems with your computer to wake up do not sleep mode. I'm happy to help you with this. Please report the number of complete product for your laptop. Check out the following, if you need assistance with this information. How can I find my model number or product number?

  It is likely that it is a setting in your power options, turn off your keyboard or a touchpad under power management. I recommend that you look through these two pages. Everyone has something of value to the issue you are experiencing. The second is a good resource for knowing where to look for the different settings.

  HP PC - troubleshooting sleep and Hibernate problems (Windows 8)

  HP Notebook PC - management Power Options (Windows 8)

  I hope this helps.

• My computer has a virus, can I start safe mode and download the scanner software?

  My daughter has a virus on his computer and he was arrested for perhaps a year. Can I try and see if it will boot in safe mode and down load a service of scaning as Mirco soft essentials for a scanner or Malware Anti-malware bytes. I guess my question main you can down load a program in safe mode.

  Hello

  Of course you can. Use safe mode with networking to download directly on his computer--several times
  as you start the computer, press F8.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
  MALWARE IS STILL PRESENT).

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 to get infections of virus and spyware.
  See http://www.microsoft.com/protect/support/default.mspx for more details. For international information,.
  see your subsidiary local Support site.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows XP restarts all the time; does not start mode safe mode and last known Configuration does not work either

  Hello! Recently, I installed Wubiand appreciates well. However, a few days ago, when I tried to boot XP on my netbook (EEE PC 1005hab), it restarts just constantly return to the selection screen of the BONES. I tried Safe Mode and last good Configuration known with anything will do. What should I do now? Ubuntu has not stopped working suddenly, so I can't access my data.

  I don't have to have a Windows XP CD, there is something weird Asus recovery instead. In addition, it is a netbook so I don't have an optical drive to run the recovery CD. I'm doing a Livecd of Linux USB so I can back up my data... but I can do but reinstall at this point?

  Thank you.

  The afflicted system has a working CD/DVD drive (even an external).

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu, it has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start pressing the F8 key with more urgency (earlier and more frequently) until you see disable automatic restarts on system failure, and then select it.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• After a system restore to a time before Windows XP, should I leave Safe Mode and restart normally? What other steps should I take in Mode safe?

  After a system restore to a time before Windows XP, should I leave Safe Mode and restart normally.  Completely restored restore operation the registry both before the intrusion of viruses if the date and time specified as the restore point is earlier than the time of the intrusion, but in the same 'on' the cycle of computer?  I have to do something else before going back to safe mode?

  Time as about 23:00 last night 7/29 restoration, first known intrusion by "XP Home Security 2012" was shortly after midnight 7/30.

  I ended up a sde.exe process, which stopped the pop-ups.  A full scan with Norton quarantine, JS. SecurityTool.  After a restart of the computer, the normal features of the programs has been lost by the "Run" menu or icons on the desktop.  By clicking on the icon for the normal .exe files redirected to the dialog box "select a program to open.

  I restarted in Mode safe mode with networking and then restore.  I tried opening IE and Excel and that they work properly in Mode without failure.  They will work correctly when I leave Safe Mode and restart normally.  Should I test other specific applications.

  XP Home Security 2012 seems to have accessed or modified some files to DropBox (not sure how this program was installed, but it was already on).

  Should I delete all DropBox files, just those showing a modification date corresponding to the intrusion of XP Home Security 2012, or don't you worry about this?

  After a system restore to a time before Windows XP, should I leave Safe Mode and restart normally.  Completely restored restore operation the registry both before the intrusion of viruses if the date and time specified as the restore point is earlier than the time of the intrusion, but in the same 'on' the cycle of computer?  I have to do something else before going back to safe mode?

  Time as about 23:00 last night 7/29 restoration, first known intrusion by "XP Home Security 2012" was shortly after midnight 7/30.

  I ended up a sde.exe process, which stopped the pop-ups.  A full scan with Norton quarantine, JS. SecurityTool.  After a restart of the computer, the normal features of the programs has been lost by the "Run" menu or icons on the desktop.  By clicking on the icon for the normal .exe files redirected to the dialog box "select a program to open.

  I restarted in Mode safe mode with networking and then restore.  I tried opening IE and Excel and that they work properly in Mode without failure.  They will work correctly when I leave Safe Mode and restart normally.  Should I test other specific applications.

  XP Home Security 2012 seems to have accessed or modified some files to DropBox (not sure how this program was installed, but it was already on).

  Should I delete all DropBox files, just those showing a modification date corresponding to the intrusion of XP Home Security 2012, or don't you worry about this?

  System Restore IS NOT the way to remove malware. The reason why you do not see the effects of the malware in safe mode is probably due to the fact that the process for most malware does not load in safe mode, and therefore not active.

  Restart the computer in Safe Mode with network. Click HERE. Download Malwarebytes. Update Malwarebytes and perform a full scan.  Choose to quarantine found nothing. Once completed click HERE and download Superantispyware Portable. Run a full scan quarantined found anything yet. Restart your computer in normal mode and perform a quick scan with Malwarebytes.

• NICs not appearing only in normal mode and wireless not work not (witness still on orange)

  Hello all and thanks to anyone who responds! I'm pretty clueless when it comes to computers, so I hope it's just something simple.

  I am running Windows Vista Home Premium with a Presario F700. The processor is AMD Athlon X 2, processor Dual-Core TK - 55 1.80 GHz. 958 MB RAM and 32 - bit operating System.I don't know if you need this information but better safe than sorry. OK for the problem.

  The computer is supposed to be wireless, but I cannot make it work. When I go to Device Manager in a single Normal boot device shows. It is said: NVIDIA nForce 10/100 Mbps Ethernet #2. I'm not sure what that means, but he says that this device does not work correctly. I couldn't HP Wireless Assistant to work so I followed some advice that I've seen an uninstalled but that did not help at all. I'm sure that's not my firewall is disabled. And I use Norton Security, but I don't know which is not affecting him either since it was a problem before I installed Norton.

  Also, if I boot mode safe more things highlighted in Device Manager. For example, it shows these: card 6TO4, isatap.hsd1.fl.comcast.net, NVIDIA nForce 10 / 100 Mbps ethernet #2 miniport (IP) wide AREA network, wide area network (IPv6) WAN miniport, miniport Wan WAN (L2TP), miniport WAN (PPPOE), miniport Wan WAN (PPTP). But only in Safe Mode. Even if I try Boot Mode safe mode w / Networking they always disappear and it's the only one. I have tried everything I know how to do but I'm at a loss as to what prevents it from loading the Normal start.

  On a side note, someone said to make sure that the adapter is enabled in the BIOS and I checked and the only thing remotely sounding like a NIC is enabled. He wasn't that anything listed in the order of boot on an adapter until recently, and it's at the bottom of the list with an exclamation mark next to it. However, the exclamation point is now gone, but NIC is always at the end of the list. I also ran the check disk thing, and he came back fine. I ran a full scan of the system without any problems but a few tracking cookies. I tried to uninstall in safe mode and start back to normal to leave the computer to reinstall without success. I also used the option reset back to the factory. While time consuming which did not help either.

  If anyone has any ideas as to what I can I would be very happy. I'm hoping to give this computer to my brother as a Christmas gift. Sorry for the long post but I wanted to make sure I was as complete as possible to save everyone time. Thanks again. And if I missed any information please let me know and I'll fix it.

  If reset you to factory, it should work.  It is a switch broken (I don't him think) a motherboard problem or probable internal problems with the wireless. Take it to a store because it is a common problem with these computers.

• Loss of connection with my router, shows only limited access and my network showed that unidentified

  Original title: unidentified network, missing the default gateway

  Hello

  So one day out of the blue I lost connection with my router. I was able to reconnect but this time around I had only limited access and my network showed non-identified. I tried to connect to a different wireless network, same thing. When I run ipconfig, I'm missing a value for the default gateway.

  I tried to:

  -Reinstall the drivers for the adapter

  -update the drivers

  -Reset my router

  -Gateway ipv4 manually of entry

  -kill lan via Device Manager drivers

  -scream at the computer

  I have a Setup to dual boot with Linux Mint along side Windows 7. When I boot in Linux it connects to any network without problem.

  Some help would be appreciated.

  Plug

  Windows 7 Ultlimate

  I7-4700MQ @2.4

  GTX 765M 2 GB

  8 GB RAM

  1 TB + 240SSD

  Realtek RTL8188CE wireless

  Hello Alex,.

  Thank you for your response.

  I appreciate your time.

  I suggest you to uninstall the network driver wireless and reinstall in compatibility mode.

  To uninstall the driver, follow these steps:

  a. press Windows + R keys together, type devmgmt.msc in the run window and press ENTER.

  b. Click to expand network adapters, right-click on the map and click Uninstall.

  c. restart the computer.

  Now you can Download driver from this link wireless.
  Reference:
  http://downloads.Eurocom.com/support/drivers/zip/238/238_RealtekWLAN_W764.zip

  For reference:
  EC http://www.Eurocom.com/EC/drivers (238)

  To reinstall the driver in compatibility mode, follow these steps:

  a. right click the driver file, and then click Properties.

  b. click on the compatibility tab.

  c. click on check "run this program in compatibility mode for" and select Windows XP(Service pack 3).

  d. click apply and ok.

  Now, install the driver.

  Please keep us updated.

  Thank you

• I can't do an update of windows in safe mode and unable to start my computer in normal mode?

  Home premium Window7 on Asus laptop

  I want to install antivirus McFee, and it's at a standstill with some problems.  He asked me to do a windows update.

  When I start the computer in normal mode it fails and offers you the following message "a problem has been detected and windows has shut down to protect your computer."

  So I can open only in my local library with the safe mode with networking

  Unfortunately, I can't do an update of windows in safe mode?

  I spent hours trying to solve this problem without the chance and the library is due to close so I'll for now I just ask if anyone can help: -.

  So, how can I do because the computer does not allow me to open in normal mode and I need to install windows updates?

  REMOVE McAfee.  Download your computer up to date and works well.

  Do a scan with ADWcleaner http://www.bleepingcomputer.com/download/adwcleaner/

  AFTER that, install McAfee.

• I'm stuck in safe boot mode and can't get out

  I created my boot to start mode of sade with minimal services and no networking.  I didn't know that it would not allow me to display the start menu and then fix it.  I said manually at the start of this way and now when I click start it wont open for some reason any.  I'm totally on luck here?  We moved my restore disks are missing and I have no restore point and to top it off, I turned off remote access, LOL how I did this.  just need to access the start menu so I can go and get back to normal startup, but when I click on this icon in this field it will not open.

  also, I saw something in there that says system possible crash and I wonder what it's the devil.  can not get the remote assistance, have no restore disc (obviously did not know that they are misplaced) suggestions would be so appreciated.  I have no ISP access on this computer and don't remember the email that has been implemented that I never put in place the email account.  I don't see that anyone can contact me on aol, but that's where my email account is I have access to another computer, the problem is on my laptop.  It has windows 7, is a bridge, 4 GB with 64 No 32, I'm under the home edition of windows 7. I know it's a simple solution, I think my other address works in hotmail.

  Hello

  
  If the problem persists on your computer or arises in the future, try the following steps.
  
  (a) connect to the computer by using an account that has administrator rights.
  (b) click Start, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.
  (c) If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  (d) on the general tab, click to select the Normal startupoption.
  (e) click OK, and then click restart.
  Further,.
   
  Make sure that "safe mode" is disabled under the Startup tab in the System Configuration Utility window.
   
  Check if it helps.

• Don't port look for a printer in windows xp mode and virtual PC

  Have an older Calcomp plotter.  Used with Win xp.  The drivers are not compatible with windows 7 (64).  Upgrade to Win 7 Professional, downloaded xp mode and virtual PC.  All right.  Installed my plotter in xp Mode, but can't seem to find the plotter to printer usb port is connected to.  Knowledge tracer works because as I tried different ports, the test print on my HP printer that is set up a home network.  Reading the different instructions, but they are above my head.   Have HP touchsmart w / three usb ports on the back.  One of these ports to connect printer.  I think I need to make a set to the top of USB devices in xp mode, but do not understand what I have to do.  Anyone using xp mode and windows virtual PC with windows 7 that can simply explain it would be appreciated greatly.

  In XP Mode, set the plotter to XP Mode in the USB menu in XP Mode header bar.

• Yahoo Messenger opens in safe mode and not in normal mode

  August 10, my flash has crashed when I was with google chrome, then all of a sudden, yahoo Messenger is wobbly. Then thought that yahoo needed to update Messenger, so I checked and of course, there was a newer version. I downloaded and that one point until yesterday if my computer went to sleep while I was connected to yahoo messenger or if I signed up I could not sign in and the purple area remains impossible to click anywhere or even move desktop. Could not only to return with a restart of the computer.  Now it doesn't open in safe mode and not in normal mode.

  I have been in contact with the support of Yahoo messenger and they gave me things to try as Messenger clear cache via the prompt commands, uninstall and reinstallation in Mode safe mode with networking, reset of IE9, check the connection, etc... Yesterday I did all these steps and this time I saw came error window "missing windows component, flash.ocx". I went to Flash via the Control Panel, and of course, my ActiveX went awol. Then I got using IE9.  Instant yahoo Messenger WORKS FINALLY! And I got the smiley face on the login window animation, BUT I can't use it in Mode without failure.  Login window won't be developed in Normal mode.  Is there something I have to toggle to open in Normal Mode?  I have this blue and yellow shield on it. I did the thing of Mr. fixit and there he had set for a few minutes, then she came back.  In the said detailed report something hidden icon got corrupted and something to rebuild the icon cache...
  -Using Windows 7 Home Premium 64-bit

  Hello

  1 are. what fixit you referring?

  2. do you get an error message when you run Yahoo messenger in normal mode?

  Method 1:

  Right click on the Yahoo messenger and select run as administrator.

  Method 2:

  Perform a clean boot and check if you are able to launch Yahoo messenger in normal mode.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Once you are done with the boot, follow step 7 of article to reset your computer to normal startup.

  Method 3:

  To rebuild the icon cache, refer to this link.

  Forum FAQ:How to rebuild the icon cache