Full length

I'm having this problem.  I made a composition and place all of the values of the size and length. At this point, all right. But when I add a new solid, the solid is not the same length of the composition. So I have to drag it down.

Capture.PNG

I don't know that I was clear.

Hope you can help.

Well, then take 10 minutes across all preferences.  You will find it.  It may be in the preferences for still images.  Strong are stills, you know...

Tags: After Effects

Similar Questions

  • Highlights of a multicam project film full length

    I turned a concert of 40 minutes with 3 cameras and the customer wants 5 minute highlight reel of this concert. I would be reasonably comfortable untangle a film multicamera concert full length, but what I can not understand is how to make a film of highlights of the concert using multicam without getting into trouble. I did a whole show before multicams so I do just the best editing without Miss, but I imagined if I try and make a film of highlights using multicam, it could be problematic because I use the duration of the sequence. I don't want to have manually ensure synchronization of cuts with the music. I'm probably not explain very well so I apologize. Can I jump before five minutes in a configuration multicam for the bit I want without causing problems?

    If it was my first project thing I want to do, duplicate project as a snapshot to preserve the finish of the version.

    Can I create a new empty project and cut the selections of the copy to the salient facts project - probably using the blade tool - or the range tool.

    Good luck.

    Russ

  • InDesign CC 2015 making the vertical border full length on the left and right of the epub

    Hello

    I'm working on a fluid epub 3.0 and I do the vertical borders to the left and to the right of the text. I created two object styles - one for left and one for the right border. These are vector shapes InDesign so I put in place of style to rasterize export options each and float in left (or right) accordingly. Both custom to an empty paragraph containing a nonbreaking at the top of the document, set automatic leading space anchor use. The problem, it's the ePUB to honor only the property float, based where the form is embedded. How can I get every border to sit to the left and right and still running the vertical length full of display area? I know that I could remove the forms and put in a shot of color on the text block, but this will put the borders on the top and bottom and sides. I would then have to crack open the ePUB and edit the CSS to limit borders on the left and right. I try to avoid cracks, it opens, but I'll do it if there is no other choice. Here is a screenshot of what it looks like to the InD and the other is a preview into Digital Editions (double page view).

    Indesign Preview.jpgAdobe Digital Editions 4.5 Preview.jpg

    Well, I found this one on my own. I just got an external stylesheet and referenced when I export to ePUB. The style sheet has the css I needed and it works now!

  • my not showing the necessity of full length to restore the full length of the flat screen monitor

    I have samsung SyncMaster2032bw monitor on window vista Office ADVENT sunddenly my monitor screen not showing the full lenth on about 2 "screen of short tips on everything to please the application?

    thanking you

    Charles

    Hello

    I suggest you to follow these steps and check if that helps:

    Method 1:
    I suggest you try to execute this fixit and see if it helps:
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

    Method 2:
    Update the latest drivers for the graphics card and check if it helps:
    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    It will be useful.

  • Why is my full length video in sequels only play at normal speed for 20 seconds

    Hello world

    I'm developing a video "cube" four videos to spin slowly from left to right, allowing each video to show. As I have been able to address, why the videos were playing so slow, that I started playing at 100% which now gives me normal reading or speed for each video. The downside is videos sometimes narrowed down to a simple 20 seconds (approx.) length of game for each four sides of the cube.

    The cube was set to run for about 5 minutes.

    So my goal with your help if you can help me please with a solution.

    Thank you!

    Merry Christmas!

    Bob

    According to the video you could send just to loop. Do in the interpretation of the images.

  • A key panel full size can be used with I pad pro?

    A key panel full size can be used with I pad pro?

    Only if the keyboard is full-size using Bluetooth connectivity.

    I've not seen any portable keyboards, full length using Bluetooth, however.

    Most Bluetooth keyboards for tablets are made compact to be more ergonomicaaly designed with the size of the tablet.

    If you found or will find a full-size, keyboard full length that works with Bluetooth for iDevices and iPads, so this should work.

    Good luck!

  • Windows media player playlist length

    Simple question, however I couldn't find the answer anywhere (not in something, not online help)

    In the old WMP, you could see the full length off your playlist. That is to say, if you play two songs from 3 minutes, you will see that it takes 6 minutes total.

    But with the new WMP, this feature is no longer there, always I really want to see how long it takes on the lower right. Does anyone know how to get that back?

    Hello, kwast

    This information is displayed above the playlist in Windows Media Player 11. You will need to have the Playlist shown to see this information. You can activate it by clicking the second button to the left of the search box and click on view the list pane.

    This was changed to the bottom in the next version of Windows Media Player.

    Let us know if that helps.

    David
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If a post has solved your problem, be sure to mark it as a response and if there is a useful message, don't forget to vote as useful for helping others find easier solutions.

  • Change of keyboard USB external Apple connected to the Macbook Pro

    Dear ladies and gentlemen,

    I need your help. I have a MacBook Pro running the last Sierra 17 "MacOS. I bought a 27 "Thunderbolt display and wanted to use a full external keyboard USB Apple (with the help of the digital keys). I have connected to the screen "USB port, closed down the internal screen MacBook... magic happened... keyboard poped office to the top of the screen external AND external full resolution was working properly..." Unfortunately only for 1-2 minutes, then the layout changed back irreversible in a layout resembling the layout if I would press "alt". Only way I could "resolve" to disconnect the keyboard USB plug and then plug again... but after 1-2 minutes did the same thing...

    I tried to plug the USB plug into the MacBook Pro directly, but the same thing happened...

    I am so unhappy that I can't use correctly the full length external Apple keyboard, large... Any hint/resolution?

    Thank you for your help in advance,

    Péter

    System Preferences > keyboard > Input Sources > [√] see Input menu in the menu bar

    ... then the menu icon before, choose «Show Keyboard Viewer»

    Now, look at the chart of the keyboard that appears on the screen. If the Alt/Option key is stuck, the key will be gray, as if it is held down. If you press it again, he himself is not?

  • Making clips composed of a browser-problem event

    I have been slow (1 hour or more) video on a go pro and import it in FCP to edit; my go splits pro 1 hour long video into several separate clips (usually 4), and after them get into final cut PRO, so I have to combine them into a single file once again, I am using compound of clips.  The fastest way to do it, I think, is to select clips in the browser of the event, right click and create a clip made up; However for some reason any when I do that one or more clips in the compound clip are generally reduced much, so I have to open the item in the timeline and restore clips concerned so that they are at their full length.  Anyone know why this is happening and how to prevent it?  I can work around it is but it is annoying to have to do.

    Don't know why this is happening. Out of curiosity try to make an empty compound clip, opening and adding content. The same thing happens?

  • Where do I fins 'tools' so that I can copy and paste?

    I have Windows 7 and I just downloaded Firefox as my default browser. I can't find the 'tools' for copy and paste. I'm on Facebook a lot, and I copy and paste articles and messages all the time. But I can't find the 'tools' to copy and paste on the topic of Firefox at the top of the page. Where is the copy and paste located?

    You can use Windows shortcuts:

    • CTRL + c to copy
    • CTRL + v to paste

    And you can use the context menu.

    If you have the menus compact represented by the orange Firefox button, you will notice the Word Edit with some icons next to him.

    If you have the classic menu bar full length, copy and paste are in the Edit menu.

    Finally, you can add icons in the bar if you prefer. You use the personalization feature. To call it that, either:

    • Right click on a zone empty of the tab bar (or the button '+' at the end)
    • Menu view > toolbars > customize

    The icons are not alphabetical, but you should find cut, copy and paste somewhere drag and drop it where you want, and then click done. (If you get tired of them too much space, reopen customize and sauté them.)

    You can find a method that works well for you?

  • Password requirement: you need to change your iPhone unlock access code within 60 minutes.

    Question:

    A couple of weeks, after unlocking my iPhone, I received a strange guest on my iPhone 5 (running iOS 9.3.1 not jailbroken) saying that I had to change my password within 60 minutes.

    Do not think much of it, I followed the instructions and changed the password via the guest. I didn't question the fact that it gives me options other than to choose a 4-digit password.

    After changing, I was again 2 weeks later (2 days ago from the drafting of the present) invited to change my password, except that this time I had 58 minutes to do this.

    I found this to be a bit sketchy so I did some research and there was no documentation of apple in this regard, only the forums a lot of other iPhone users who have experienced the same thing and forums have been dated as soon as 2012 (that I've seen in any case, could have been more before too).

    I rang apple support, and they were not aware of this problem because it was not a feature for iOS which made this place and recommended I reset my settings immediately (by going to settings > general > reset > reset all settings). This resets all settings, does not erase your data.

    It was my personal guess that if it was actually a malware, it can be connected to the operating system in some ways because the first time, I changed my password via the command prompt and it worked. So I made the decision to back up everything I wanted to keep manually and not through iTunes, then manually to get any return. This may have been unnecessary, but it is still I think that all these recent iTunes backups I had had this problem.

    If it was in fact malicious, I don't know what kind of access he could have had on my phone, either data or another. I may be a bit paranoid, but wanted to stay on the safe side as pretty much everything, I was put in place and connected to my phone. I went the full length and changed a lot of the settings for the accounts I have. Yet once, probably wasn't necessary, but safely.

    So if you feel yourself, just know that it is not created by apple and you at least have to reset your settings.

    I hope that it doesn't matter what lightens!

    PS Ce isn't a screenshot I took, this is one I found on another thread stackexchange (source: http://apple.stackexchange.com/questions/124771/is-the-message-you-must-change-y our-passcode-within-60-minutes-valid-non...). Although he is exactly got me

    Please, it is an old problem that you have learned you looked in the forums before proceeding with such a long and useless post. I'm sure you mean well, but one of the elements discussed in the communities of Apple - terms of use support is first search the forums about your problem before posting. Scams such as these were widespread and often identified - too often.

  • Disk error hard satellite L50-B-235

    Laptop stopped recognizing Bluetooth, so restarted, but when you start it says something to check a disk and repair the hard disk, which then laptop crashed before completing. Would not start once again, it is:
    1 past age on the toshiba screen then tell no boot device
    2 load the login screen, then past ages in front welcome saying windows preparation and loading a temporary profile. When he made a mistake shows saying Windows detected a hard disk problem. Back up your files to prevent loss of information and then ask the computer manufacturer to determine if you need to repair or replace the disk. It will then crash after 10 to 30 minutes and the blue screen with my critical_process_died error, which restarts always shows described in 1.

    I have Windows (updated 8) 10 and the laptop is less a year. I've tried various searches on google and fixes, including:
    Update of system drive where Windows is is locked
    Check disk either from the start menu or the command prompt in the temporary profile
    Changed the boot order and then back again
    Several reboots
    Open to the top of the unit and removed, then replaced the hard drive

    Nothing worked, I do not have the recovery media and not really means for the moment. This could be a real hard disk problem (it heats up during boot ups) which would mean it needs to be replaced? If Yes is that these can be purchased with Windows installed on it?

    While I update to windows 10 I have a probem with the use of the hard drive because he moved to the use of 100% and the laptop just crashed.

    I search in the Admin Panel and I discovered that I have a service called host system: local system (private network). I tanslate it Spanish which is the language was my laptop.

    Also I have a problem whit the video card because systems always use the graphic istead intel video card (AMD one). I tried to solve this problem in istalling the graphic control of AMD program, but the program doesent work better because the use of the hard drive is always more 100% and the experience of the computer laptop full length.

  • How can I stop iMovie 10.1.1 from my clips big screen media cultures when I move them to the component of the project (window)?

    I am currently creating a short reel demo/culmination of a feature-length independent full length on my iMac.  The format of independent film is on the big screen and it appears this way in the media window/pane.  But when I take leave of this wide screen support and move clips / add them to the window/pane project and strengthen so the demo highlights reel, clips no longer appear on the big screen - looks like the clips (proportions?) have been cut.

    How can I stop this from happening?

    Thank you!

    If you set 'Placement of Photo' in iMovie preferences to 'Fit' rather than 'Fill' (which I think may be the default) then all your video content will be visible, but you will have bars on it and if the aspect ratio is wider than 16:9.

    For clips already in a timeline, you can change the setting to 'Fit' with the crop tool:

    Geoff.

  • Missing the start of the audio clips Satellite L350D - 12M

    Hi all

    I took up a L350D - 12 M at the weekend and I'll have a problem with the audio output.
    I use a timing software model car and part of his job is to generate a series of short tones (beeps) to start the races.

    The problem I have (as far as I can tell), it is that the audio chipset is not all the time. I guess it's one thing to save energy.
    The time it takes the chipset to wake up is greater than the length of the tone played by software and you can't hear it (or you could catch just the end of it). There are 10 tones in the countdown to the race start and it does on everyone else.

    This is a real show stopper for me and I could do without the hassle of trying to persuade the shop to return the laptop.
    Is there a registry setting or setting of software that I can configure to make sure that the audio chipset is still living? (If this is the problem, of course).

    The OS is Vista Home Premium and should make a difference, I'm sure that the tones are based midi.

    Thanks for reading,
    Jon.

    Test if this is the case of the files audio to .wav. Just navigate to your windows directory media, there are some of these files. If they play to their full length, then it is not your sound card, do harm.

    Maybe your program is not completely compatible with vista. Could try you on another machine with XP installed?

  • HP TouchSmart 600 - 1070 has blocking of overheating?

    I am repairing a Touchsmart 600-1070a who suffered a fall from his office (damaged the on/off switch, but that is fixed), already replaced the HARD drive that had bad sectors.  There seems to be a lot of cumulative small hiccups, including;

    * sometimes not even bring to the top of the screen on powerup, remains black despite the fans running, power light.

    I suspect that it is a matter of gfx module or connector problem, as I loosened and forced the GFX module in its unlocked connector and reinstall the graph LVDS lead and - apparently - to have solved the problem for now.

    * for execution, will crash intermittently Win7 and how the region of radiator for chipset is exceptionally hot (about 50' C) and it is with the metal plate still attached.
     
    To do this, I don't know what approach to take.  There is a spacer between the heat sink for this chipset and the metal casing that is filled by a heat-carrier pad.  My suspicion is that the pressure of the arriere-stand against the metal actually requires chassis-pad-heatsink to stick, but I think now that the cushion is probably due to replace or another option sorted as things are just not too hot

    Someone else had a similar problem?

    The GPU and CPU radiators have all been cleaned with compressed air / brush and work correctly.

    (photo showing the motherboard exposed without the metal support pregnant.  The radiator in question is orange, one located in the center of the motherboard near the memory.

    I placed a layer of transfer thermal padding that is normally used between transistors/MOSFETS and sinks of heat, about 1 mm thick, on top of the orange radiator - seems to have now settled the system down, played a video DVD and YouTube full length at the same time without crashing.

    So now, we have chip|heatsink|transfer-padding|pale-transfer-thick-padding|metal-backing.

    Active cooling a bit more would have been nice in the form of a fan from somewhere, but as long as it doesn't crash, I guess.   Metal case houses approximately 49' C around the location of the radiator.

Maybe you are looking for

  • How can I change my address on my ticket guarantee?

    I registered my laptop when I got it in the post in 2008. All that if I did, I didn't create all accounts or something just to register my mobile on the Toshiba site for free warranty.Of course, I put the address I lived at the time and now I've move

  • Portege R100 hard drive does not work properly

    HelloRecently, my computer suddenly started working slowly. I restarted. Then it took 25 minutes for lunch my windows xp Pro. Whenever I tried to launch an app he bugged and restarted again. After scandisk, I decided to reinstall my operating system

  • Can you show Chinese in a button?

    I have a machine that is fully developed and works well, but now he must go to China and they want some of the buttons to be in Chinese. Can I send Chinese characters to a button? Thank you Doug

  • Try to diagnose the strange message in the event viewer

    After that I started my PC, I was looking at the event viewer to see if there was any error messages and found this... Could not validate the fact that \Device\Oxser0 was really a serial port Sort of tracking down what it means? Google was unhelpful.

  • You can control a peltier with DAQPad-6015 chip?

    Hey,. It is a simple enough question.  I was controlling a DC power supply with a labview code that I wrote.  Then my colleague told me that it was possible to control the chip peltier directly via the DAQPad.  Is this true?  If so, how I would contr