Function 'Again cut layer' to the pixel selection.

Similar Questions

• PE8: New layer of the Lasso Selection tool

  Hello

  I chose a pitcure format NEF area. When I press Ctrl + j or right click, a new layer is not containing the selected area with the "New selection" icon turned on.

  I'm doing something wrong?

  Thank you very much.

  Make sure the file is not 8-bit and 16-bit.

  Image > Mode > 8 bits.

  MTSTUNER

• How to clear sticky-selection layer with the tool around in Photoshop CC?

  In Photoshop CC, you can click and drag the tool move to select more than one layer.  But sticky selection seems to be a novelty.

  In the attached screenshot, you can see that I have selected several layers of a graphic illustration.  Marquee of the move (not to be confused with the pixel-selection) tool is liked to touch these layers, but they remain selected.  Suppose that I have selected some of these layers accidentally: when I move the marquee away unwanted layers, I want than Photoshop to deselect them.  I don't want to restart a selection each time that my wrist shaking during the selection process.

  I realize that there are several ways to select layers.  I'm not looking for alternative solutions.  No sticky home or go.

  I am under Photoshop CC (2015.0.0 version) on OSX 10.11.5.

  

  It is in the upper left corner of your screen capture: Uncheck self-select layers.

• The term 'Select-Object-property' is not recognized as a cmdlet, function, script file or executable program. Check the spelling of the name, or if a path has been included, make sure the path is correct, and then try again.

  I have a fairly new version of PowerCLI (5,5 Rel 1) 5.5 being ESXi and vCenter.

  I also checked that automation. Core is installed:

  PowerCLI C:\Windows\system32 > Get-PSSnapin VMware.VimAutomation.Core

  Name: VMware.VimAutomation.Core

  PSVersion: 2.0

  Description: This Windows PowerShell snap-in contains the Windows PowerShell cmdlet

  TS of vSphere management.

  but after connecting to vCenter, I get error trying to run:

  PowerCLI C:\Windows\system32 > $Results = ForEach ($DRSRule to $DRSRules)

  > > {}

  > > «|» Select-Object-Property @{N = 'Cluster'; E = {(Id-vue-Get $DRSRule.Clust)}

  amplifier. {{ID). name}}.

  > > @{N = "Name"; {E = {$DRSRule.Name}}.

  > > @{N = "enabled"; {E = {$DRSRule.Enabled}}.

  > > @{N = 'Type of DRS'; {E = {$DRSRule.KeepTogether}}.

  > > @{N = "MV"; E = {$VMIds = $DRSRule.VMIds - split ","}

  > > $VMs = ForEach ($VMId to $VMIds)

  > > {}

  > > (Get-View-Id $VMId). Name

  {> >}

  {{> > $VMs - join ","}}

  {> >}

  > >

  The term 'Select-Object-property' is not recognized as a cmdlet, fu

  function, script file or executable program. Check the spelling of the name, or if

  a path was included, make sure the path is correct and try again.

  On line: 3 char: 32

  +     "" | Select-Object-Property < < < < @{N = 'Cluster'; E = {(Get-view-Id $DRSRule

  . {{Cluster.Id). name}}.

  + CategoryInfo: ObjectNotFound: (Select-Object-property string :)

  [], CommandNotFoundException

  + FullyQualifiedErrorId: CommandNotFoundException

  PowerCLI C:\Windows\system32 > Add-PSSnapin VMware.VimAutomation.Core

  Is ' Select-Object-Property not installed?  If not, where I get it, please?

  see you soon

  KC

  Note, I received this Dean here code: PowerCLI: extraction rules DRS; Deans blog

  There should be a space between the - Property parameter and Select-Object

• Copy path of a shape layer to the layer path again

  I use connect traces on a shape layer to animate the "drawing" of the form. Then I have a still image (my hand) that I want to follow the application of the shape layer.

  In AE, I this today by defining the paths of the toppings, then copy the path of the shape layer.  I go to the layer again, select the position attribute and paste. This deal is still keyframes layer which coincide with the shape animation.

  I thought I could go something on the shape layer and then create keyframes on the layer again. However, I am not sure this makes sense?  Use valueAtTime() on the way to the shape layer?

  Any ideas how I can replicate this workflow to ExtendScript?

  Try this - it might get you up to get the path of the layer shape copied in the position property of the layer of the hand:

  
  

  function deselectAll (theComp) {}

  for (var i = 1; i)<= thecomp.numlayers;="">

  theComp.layer (i) .selected = false;

  }

  var theProps = theComp.selectedProperties;

  for (var i = 0; i)< theprops.length;="">

  theProps [i] .selected = false;

  }

  }

  var app.project.activeItem = myComp;

  deselectAll (myComp);

  var myPath = myComp.layer ("Shape Layer 1") .property ("ADBE vectors root Group").property("ADBE_Vector_Group").property ("ADBE vector Group").property("ADBE_Vector_Shape-Group").property ("ADBE vector form");

  myPath.selected = true;

  app.executeCommand (app.findMenuCommandId ("Copy"));

  deselectAll (myComp);

  myProp = myComp.layer("Hand").property ('Position');

  myProp.selected = true;

  app.executeCommand (app.findMenuCommandId ("Paste"));

  Dan

• Can I cut around a path on a layer of the imported bitmap image?

  Hi all

  I work in Illustrator 9 on Windows 7.

  Can I cut around a path on a layer of the imported bitmap image?

  I have imported a Photoshop layer and I have a way of triangle on an Undercoat of the imported bitmap layer I want to select around outside of and then cut around the trail on the imported bitmap layer to make this bitmap layer the shape of my path of triangle.

  But when I select "Reverse" he tries to select other paths out of my way to triangle, it selects only the layer of the bitmap and leaves me to delete only this layer of the entire bitmap.

  I want to choose my path, then do it slightly cut the edge of the track on my imported bitmap layer.

  Thank you for any input,

  Digi

  You can use paths in an artistic form, no pixels, no clipping mask.

  If you need to recreate this in Illustrator. Should be simple enough to create these wavy lines. Their color, the pathfinder to create the triangle. You can then create the art brush.

  This here shows a slightly more complex procedure, because there is a gradient in there: http://www.vektorgarten.de/illustrator-flattening-transparency.html

  For wavy lines, you can use the effect zig - zag (or filter)

• What is the best way to edit the pixels of the layer without applying the image?

  Help, please!?

  What is the best way to change the pixels on a new layer (clone, healing, patch or selection) without applying the image? When I do that, I can't change the under layer if I make a mistake.

  Does this make any sense!

  You want to use the patch tool to put the fix on its own layer? Use sample all layers in the Options bar.

• Distribute horizontal centers does not work when pixels of the layer at the start on the left.

  Here's the thing.

  1. When my pixels of the layer are on the left, and my bottom layer pixels are on the right, (A).
  2. .. and I select all layers and click the distribute Horizontal Centers (B)
  3. .. layers is properly distributed.  Between the top and bottom layers seem to be distributed in reverse order (C)!
  4. However, when my pixels of the layer are on the right, and at the bottom who are left (D).
  5. .. I select all layers and click the button... (E),

  6. the pixels of the layer are distributed properly. Is this a bug or I do something wrong? Can I return my canvas before clicking on the button as a solution, but it's kind of a pain in the behind.  With gratitude any ideas appreciated.  I use Photoshop CC 2015.1.2, 20160113.r.355x64, Windows 10.

  Add to anti-banner

  It works OK for me.  CC 2015 Windows 7.  Looks like a preference reset may fix it for you.

• I have a photo n &amp; b and I want to select/display just the pixels to their real shadow and shade. How can I do this?

  Basically, if I have a photo of n & b and all the pixels fall into darkness of 100% (black) and the darkness of 0% (white), I want to select/display just the pixels that are between 40% darkness and darkness of 50% or 70% darkness and obscurity 80%. Is there a simple way to do this?

  

  

  1. create a level of gray as in the example above.

  2 place it on a layer above the image as shown, then merge down to create a single layer

  3. place a layer of white below

  4. return to the upper layer and double-click it to open the layer Style

  5 move the top right slider to the left to remove the values 0 to 35

  6 move the cursor on the top left to the right in order to eliminate the values 100 to 65

  Other values in grayscale and photo are between 40 and 60%

  Set the other parameters and apply the same technique.

  

  

  (To save you time, I can send you the scale.)

• I would like to cut out an object using the Quick Selection tool and drop the object into another image. Can anyone help

  I use background images and want to cut objects of other JPEG files using the Quick Selection tool and drop them in the background image. So if I have a banana and select the object, I need to copy the banana in the context on the other.

  Hope it makes sense.

  Gary

  Select the banana. Right click > copy layer. Move tool. Click and drag to the other file. Place on the image.

  GOLD: load history and banana in a stack (file > Scripts > load file in the stack). Select banana and layer for copy or create the layer mask.

  Benjamin

• How to select a range of colors as in Photoshop or copy/move a layer in the mask of another layer?

  Hello

  I'm experimenting Photoshop Elements and wanting to use a layer of black and white (gray scale) I did as a mask of a another layer and do not know how to do in elements.  In Photoshop, I could do it (there may be a better way to do it in PS, but I've not yet discovered)...

  Click on the layer, I created that I intend to use as a mask

  Select all

  Copy

  Select the layer that I want the mask to be applied to the

  Click on the button Add a mask layer (bottom layer)

  Click on the mask icon so it is highlighted (and is not the image)

  switch to the channel display

  highlith the layer mask in the R, G, B of the layers and make it visible

  Dough

  invisible again

  Switch to layers.

  This works and retains the full range of transparency for the semi transparent and soft contours of mask etc.

  Otherwise, I can choose a range of colors, but this doesn't seem to be available in PS Elements.

  So, how do I get the same result in PS Elements?

  Thanks for your help

  Jonno

  After you have added your layer mask, Alt (Option) click on the thumbnail of the mask layer in the layers panel, and then edit > paste.

• Select the Pixels of a shape. It allows to be now is not easy!

  Hey guys,.

  I use CS3 on a PC. Now I use CS5 on Mac OSX 10.6.3

  I think that the shortcut for select the pixels of a shape is CTRL-R. I tried different ways a Mac can do as command + R and Option R etc and nothing works. All I want to do is select the pixels of a form, and it does not work. The magic wand tool selects not forms, I get an error 'cannot select because the area is a target layer filled. " He never use to be like this.

  Then someone know how to select the pixels of a form? What is the shortcut?

  Thank you very much!

  Unless you have changed your shortcuts, ctrl/command + r will show/hide the leaders.

  I think what is happening is changed Photoshop where you must click to select pixels on a layer of fill in CS5. Before that you can click on the layer icon or on the mask icon. Now you must click on the mask icon.

  Another way (not as convenient, but you can try as test) to select the pixels to make the active fill layer. Then go in the paths Panel. Click on the mask path, if it is not already active. Then, make a selection from the path by using either the icon at the bottom of the Panel or the control panel menu. If that does not load the mask as a selection then there is something strange with you the document or your system.

• "WARNING: no pixel selected" with the magic wand

  Details:

  Product: Adobe Photoshop CS5 64-bit

  OS: Windows 7 64-bit

  I'm working on the application of a coating that is textured to a field of hexagons, but not for their "Grout", i.e. the border thickness between each hexagonal "mosaic". I made a selection of the "Grout" and then reversed so that now my hexes were selected, make a new layer filled with black, and then using the magic wand tool, I deselected about 2/3 of the selections in Allen. Apply noise, motion blur, makes a fine metal grain. Invert the selection, remove the excess black, then reverse and save the selection. Define as overlay, super good. Then layer, load my selection of the Hexagon, 1/3 of the responsible for the selection of France that I've done before (so I do not apply two textures on any of a hexagon) and I get about 2/3 of the hexagons selected. New layer, fill it with black, just like the last time. Except that... when I use my magic wand to deselect, I get ' WARNING: No. Pixels were selected "and I lose the entire selection. Can I deselect using square or the quick selector, but not the magic wand. Now I well recorded and could recreate so no real work is lost, but it is easier deselect each Hexagon bit (there a LOT of them) with the magic wand of monstroustly. Why this suddenly is upward?

  Thank you for your time,

  Charles DiGiovanna

  How is the box to sample all layers [] at the top of the main window of Photoshop?

  If it is not checked, the wand will only use the data on the layer that is currently selected.

  -Christmas

• BUG: Selection of the marquee selection tool displays 1 pixel off

  Phosotshop CS4 11.0.1

  I also use the regular rectangular selection rectangle for cutting precision of the rectangular portions of an image... I use it with a normal size and fixed and experience this BUG every time:

  The 'dotted line' displayed box that shows the selection, is offset by 1 pixel to the right and 1 pixel down.

  This bug is really irritating because it makes the precision of rectangular selection and harvesting difficult. Please correct in CS4, CS5 not! I paid a lot of money for the Studio! CS4 has been for a long time now, and there has not been a lot of updates!

  platform: Windows 7, 64 bit. ATI 5700 series card.

  Hello

  Try to disable OpenGL in Edit > Preferences > Performance.

  Torwald

• The copy function blocks computer after an item is selected, and the computer is responsible for copy

  Original title: copy function

  The copy function blocks computer after an item is selected, and the computer is responsible for copy. It does not matter what size is the copy area. It usually requires a reboot hard to use the system.

  I tried to follow some of the instructions in a full Clipboard and unfortunately that is not the forms of the English spoken by them.

  Any help would be greatly appreciated.

  Denver

  d2n1cart@hotmail'com

  Hello

  We are pleased to know that the problem is solved. Let us know if face you any problem with Windows in the future.