Function of FDMEE exercises against the adaptation period

Similar Questions

• function return to exercises

  Hello
  I already have a planning application that is connected to the FDM, now I want to add the function return to exercises in it, I read the blog of john goodwin about that and done as written in it, but there are a few changes in the situation.
  1. I use system 9.3 so the adapter is ES9x-G4-A.
  2. the load balancing server is configured with the MSAD directory and I have not configured with open LDAP, now the user for FDM is and MSAD user, but the user for planning is a native directory user.
  
  I've added the three properties in planning and restart services but still I'm not able to see that the drill in the source icon, now it is neccassary to add opn LDAP in the configuration of load balance and the icon will come only on cells on which data have FDM poppulated,.
  can you suggest what could have gone wrong?

  Drill back is a new feature of version 11.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Measure the movement against the frequency

  My test is measurement and tracing motion valve engine RPM. I need the valve position sample (analog signal) all of the pulses from a rotary encoder and also enjoy RPM. Then later I have to extract unique plots, each revolution of the position data. Each parcel must be referenced against the RPM about during which it was sampled. This will take place at the 66kHz about 8 seconds while it will generate a long file.

  I suggest you begin the Z (1 per rev) pulse signal sampling and 1 post analog SOUL each dry vegetable (720 / rev). Store this table. At the same time I want to run a task to capture the frequency once every revolution (pulse Z) by measuring a pulse. Store these vals to a separate table.

  After measurement is done I can record the position great soul array in a file of measures and record the frequency data in a separate, much smaller file (let's call it an index file).

  In this way, for the analysis, I can load the index table and count the length of it in order to determine the length (in points of data) of the large table soul. This could allow me questioning the guard index for a selected rpm and select the correct positional score 720 for conspiracy against angle encoder (tracing movement is against increments of 1/2 deg as x.)

  This plan has any merit? I'm new to this type of measure, and if someone knows of similar procedures I hope you hear and taken into account. Is there maybe a better way?

  This seems reasonable. Look at the threshold of the 1 d Array function.  You can use it to search the Board index to a certain speed.  Round off the result to the nearest smaller integer. The index in the positional table will be 720 * this integer (- 1).  If your speed can vary from top to bottom, you may use the start index or reverse the table to find the location you want.

  Lynn

• The cutting of a legend against the axes in tiara 2011/2012

  Hello

  until DIAdem 2010, it was possible to cut a legend in a report against the axes, but not against the chart.
  To do this, I had to create the layout in the DIAdem 8.1 set the clipping and then convert TDR LPD.
  As you can see below, the legend of tiara cache the grid axes and leaves the visible graph.

  

  The Tower using DIAdem 8.1 to create the page layout is no longer works in tiara 2011/2012

  

  How can I display a legend in DIAdem 2011/2012 which mask the axes and leaves the visible graph?

  Thank you

  GEMÜ

  You are right, 'Notes' of DIAdem 2011 you will find the following information:

  DIAdem 2011 compatibility and DIAdem 2010

  In the REPORT of DIAdem clipping settings "Only axes to hide" and "Hide axes and curves" is not available, even if you load a former route of the HPA. Instead, you can specify a background color for each object in the report. In the settings of object, select white as the background color if you want to display the report on the system of axis objects.

  The old function was not official supported since DIAdem spend the LPT TDR after 8.1. So I'm sorry that I can't give you a more satisfactory solution.

  Winfried

• Replacement of the adapter AC - Envy 14 spectrum 3011tu

  Hello

  The adapter for my HP envy 14 spectrum ultrabook, model 3011tu, recently stopped providing free to my laptop. I found out it is all a most difficult part to replace, many retailers ebay offering parts that claim to be compatible, but when buying, I found to have cords that don't fit in the socket on my laptop. The HP parts store tells me that brick replacement AC #574638-001 is no longer available and pointing me to a functional equivalent, #693716-001, but there is no card included to confirm that I will buy the right part. I'm ready to bite the bullet and pay the $140USD, but only if I can be sure I won't be disappointed when another part does not. Any advice about whether this is indeed the right part, a part can come are very much appreciated.

  Thank you

  Hi Dmc134,

  You're welcome, and Yes, as long as you are assured of admission to 3 pins on the brick that's the big difference.

  Thank you.

• Windows 2008 - what happens if it does not activate in the grace period?

  Hello

  I know it is a forum for Vista but everything on the web seems to tell me that way...

  In our Organization, we plan on using KMS for activation of our Windows 2008 servers (we have only 2 of them at the moment). However what I read you need at least 5 physical servers Windows 2008 (not the Virtual Machines) before they will start to activate.

  My question is: what will happen to the Windows 2008 servers if they do not activate the grace period?

  From what I can tell they should keep normal operation (reduced functionality Mode has apparently been removed from Windows 2008) but will be many notifications to activate me now whenever you log on to the server.

  Thanks for your help.

  http://www.Microsoft.com/windowsserver2008/en/us/product-activation.aspx

  Read the MS link above. Mick Murphy

• Why HP advises against the use of virtualization (AMD - V)

  I have the HP dm1, which is kind of a netbook. It comes with 64-bit AMD e-450 (a low-power CPU clocked at 1.6 Ghz dual core). Windows 7 starter edition is installed by default. I did a dualboot with Linux 64-bit Kubuntu. the two operating system seem to work well.

  In any case I do some tests in virtualbox and a 64-bit image requires this funciton (AMD - V) .with virtualisaiton this virtual machine can access CPU directly (rather than through software).

  However, I noticed in the bios HP recommends to avoid using it unless you use the software drive (i.e. the Oracle virtualbox). I wonder why HP advises against the use of this function? This is for security reasons? Is this because windows 7 starter edition can not handle? Or it may degrade faster hardware? or is it because of the possible extra power drain (although I have not noticed this).

  I ask because I have no such warning in BIOS of my office mashcine.

  With AMD - V active for some reason probably does increase the risk of a virus by getting direct access to the CPU. The warning is for people who wander in the BIOS and tinkering without really knowing what they are doing, to prevent consumption machines.

• Windows Backup & restore leaves gaps in the backup period date ranges

  I noticed that backup & restore leaves gaps in the date ranges displayed on the screen of backup periods under the function to manage the space.  This means that files change during the interval periods have not been saved?  For example, the screen shows currently backups and the following periods:

  Jan 26: 12-18 Mar, 12 GB 10.40

  Apr 04, 12-13 Apr, 12 GB 19.62

  27 April, 12-27 Apr, 12 GB 05.16

  May 06,12 - May 06,12 02.41 GB

  May 27.12 - 17 Jun, 12 GB 03.41

  What is the importance of gaps?

  How can I tell that B & R is fully backup all files that changed since the last backup run?

  How can I varify the 1st backup is a backup full?

  How can I varify that the system image backup is up-to-date?

  I save approximately once a week to a USB external hard drive. I use options "Include a system image" and "Let me choose" to select the files and have selected the option 'keep only the last frame system & minimize the space used '.

  Hello

  Backups are created in sets called backup periods. To maximize your disk space, Windows backup backup all folders selected, the first time it's run and then it only backs up files that are new or have been modified since the last backup was made. Periodically, Windows creates a new, full backup. Each full backup is called in a backup. When you view your backups of files, you can see all the backup periods with date ranges. If you decide to delete backups of files, you should always keep the most recent backup of the file.

  Reference:

  Should what backup settings I use to maximize my disk space? http://Windows.Microsoft.com/en-us/Windows7/what-backup-settings-should-I-use-to-maximize-my-disk-space

  Back up and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/products/features/backup-and-restore

• FDMEE - SAP bristle cone adapter (SFTP)

  Hi team,

  We are trying to integrate FDMEE with SAP using the adapter to hair-cone. Read me says that we can have the FTP or Shared folder for this. My organization won't drive Shared and FTP, they only have SFTP. Can we use SFTP Setup for this integration within ODI. Please provide your valuable feedback people.

  Kind regards

  Mouline

  Hello

  There are two points here. When we have an FTP server:

  (1) SAP download the file to the server using FTP. SAP does not support SFTP out of the box, even if the secure transfer can be configured to your SAP database.

  (2) the officer of the ODI will get the file from the FTP server using SFTP. (In fact, the KMs ODI) adapter is not configured by default with SFTP. You must set the options of LKM in case you use SSH, identity file, etc..

  All this is documented in the ODI - KMs for SAP guides.

  See you soon

• Display the error when the xml document is not valid against the schema

  Hello

  I'm using isChemaValid() in a way that, to determine if the xml document is valid against the xml schema.

  This function returns only 0 or 1, and I want to display the error and the line number if the xml is not valid.

  How can I achieve this?

  Thanks in advance,

  Elad

  Use the XMLType schemaValidate() method. It will throw an exception whose message contains the validation error.

  Get a number of 'line' is not sensible as XML is concerned.

• "Mem.Usage.Average" against the total aggregate of cluster host memory

  Please see the attachment for the whole story.

  Please give me a sanity check on this. I used the "Mem.Usage.Average" as a % against allocated VM MemoryMB. The sum of these calculations escaped by far the actual calculations of the vCenter % memory-based. So, I changed my calculations that you see in the worksheet to use the 'Mem.Usage.Average' against the total aggregate available on all hosts in the cluster. This amount came to less than 1% of my calculations based on vCenter GUI. Am I right against the total aggregate memory cluster host instead of against VM memory assigned using 'Mem.Usage.Average '? Thxs-

  

  SDK is not clear on "total configured memory available or". https://www.VMware.com/support/developer/converter-SDK/conv55_apireference/memory_counters.html Part description of memory used as a percentage of the total configured or available memory.

  
  

  $start = (get-Date). AddDays(-5)

  Get-cluster-location ActualClusterName | Get - VM | Where {$_.} PowerState - eq "Receptor"} @{N = "Mem.Usage.Average"; E = {[Math]: round ((($_ |))} Get-Stat - Stat mem.usage.average - start $start - $finish - IntervalMins 1800 - MaxSamples finishing (250) | Measure - Object - average value). Average), 2)}}"

  
  

  Cluster is 6 hosts with 128G per host for total of 768G (786432 MB of RAM), there are 118 powered on virtual machines

  
  

  
  

  for me the SDK says that percentage reflects the relationship between the memory 'active' in the virtual machine against the memory configured for the virtual machine.

  A configured with 8 GB of memory virtual computer that has 'use' of 25% is actively using 2 GB of memory.

  

  I think that your numbers you get for VMS are biased because of the great period of time during which you take the average (see previous answer).

  You can cross-check the mem.usage.average with the mem.active.average.

  In the following code, I calculate the different 2 meters actual memory used by the virtual machine.

  $clusterName = "mycluster.

  $stat = 'mem.usage.average ','mem.active.average '.

  $vm = get - Cluster - name $clusterName | Get - VM | where {$_.} PowerState - eq "Receptor"}

  $stats = get-Stat-entity $vm - Stat $stat - Realtime - MaxSamples 1

  $stats | Group-object - property {$_.} @entity.name} | %{

  [PSCustomObject] @ {}

  VM = $_. Group [0]. @entity.name

  MemoryMB = $_. Group [0]. Entity.MemoryMB

  MemUsagePerc = $_. Group | where {$_.} MetricId - eq "mem.usage.average"} | Select - ExpandProperty value

  MemUsageMB = [int]($_.) Group [0]. Entity.MemoryMB * ($_.) Group | where {$_.} MetricId - eq "mem.usage.average"}). Value) / 100

  MemActiveMB = ($_.) Group | where {$_.} MetricId - eq "mem.active.average"} | Select - ExpandProperty Value) / 1 KB

  }

  }

  The result shows a specific virtual machine, these two numbers are close enough to be considered the same imho.

  That they should be in fact, the mem.usage.average is derived from the mem.active.average.

  

• Problem with the images against the copy protection.

  Woah, taken on... I have just returned from a shoot and checked my site to see (I don't know why I come to realize this) none of my 200 + images in my galleries are protected against the download! I'm so used to the script, I had im my old site, I took it for granted. So my question is can I use the script in the head to avoid just below by clicking on or there at - it a simpler way to protect my images (albeit light protection)?

  Banks,

  Ed

  < script language = "JavaScript" type = "text/javascript" >

  <!--

  If (document.all) {}

  }

  else if (document.getElementById) {}

  document.captureEvents (Event.MOUSEDOWN)

  }

  Else if (document.layers) {}

  document.captureEvents (Event.MOUSEDOWN)

  }

  document. OnMouseDown = mousedown_handler

  function mousedown_handler (mouse_event) {}

  This is the message that is displayed

  var no_right_click = ' this material is copyright Rogers photography! Please contact us with your requests. »

  If (document.all) {}

  Probably Internet Explorer 4 and later versions

  If (event.button == 2 | event.button == 3) {}

  Alert (no_right_click)

  return false

  }

  }

  else if (document.getElementById) {}

  Probably of Netscape 6 and later versions

  If (mouse_event.which == 3) {}

  Alert (no_right_click)

  return false

  }

  }

  Else if (document.layers) {}

  Probably of Netscape 4

  If (mouse_event.which == 3) {}

  Alert (no_right_click)

  return false

  }

  }

  }

  ->

  < /script >

  I have inserted the script and it does not work. So I'll simply make room incase anyone wants to use it.

• Flex Builder detects more errors against the definition of the Array class.

  Hello

  I don't know if this is the right forum to post this problem, but here goes.

  I've been developing an application using Flex Builder 3. Today, I met a strange problem. When I use a table variable in an Actionscript class, the compiler detects more errors against the class definition. I have only encountur this behavior with the Array class. Other classes of higher level, seem to work. F.i. I can insert the following text in a function:

  var a: Array = [1, 2, 3];

  var i: a.Len;

  After construction, I get no error. When I run the application, the variable I is set to 0.

  I tried to clean up the existing project. I created a new project in flex from scratch. The problem remains.

  I did not have any updates lately, f.i. flash player, java,... the development environment has not changed as far as I know.

  Can someone give some advice about this problem? Thank you.

  Kind regards

  Wim.

  The table is a dynamic class, as an object, which means that it is perfeclty happy to return values for properties that have never put. These values will be "undefined", which, when converted to an integer, turn into 0. This is the kind of unfortunate behavior, but there is no way to get around.

• How to change the number of minutes for the exercise of the activity of the application

  How to change the number of minutes for the exercise of the activity of the application

  Hello

  It is not currently possible to change the goal of daily exercise.

  If you want to suggest that Apple consider adding this option, you can submit a request here:

  https://www.Apple.com/feedback/watch.html

• Airport express to extend wi - fi using the adapter but NOT extreme airport

  Hello

  I am looking to buy an express airport in order to listen to music through my stereo and also create another network wireless upstairs in my house.

  My question is, I currently have no apple down wireless router and I have connected to a line adapter with an adapter of the power line on the floor. If I connect the airport express base station to the adapter on the floor, I'll be able to create another network on the floor as well as the flow of my music, even if the router that comes from the connection is not apple router?

  Thank you

  Andy

  If the floor of the Airport Express will be connected via the WAN port using a regular power adapter ethernet cable carrier online and will be in Bridged mode, you can create a wireless network to the floor. Not bridged mode, you can see double-NAT issues, which should be avoided.