Fusion drive vs 7200 RPM HARD drive, it is worth the difference in price?

Similar Questions

• Is it possible to upgrade the Satellite A100-906 with 160 GB 7200 RPM HARD drive

  Hello guys,.

  First of all, I would like to congratulate all the people here for their good advice.
  As for my question, I want to upgrade my HARD drive. I have the laptop A100-906, which has a drive HARD 100 GB 5400 RPM Hitachi.

  The hard drive, I would like to buy, is also Hitachi but with the highest capacity (160 GB) and RPM faster (7200 against 5400).
  I wonder, if my laptop supports this drive and if I have problems with temperature and noise, because the HARD drive runs at 7200 RPM.

  To summarize the above, is it really useful to replace my old 5400 RPM HARD drive to a new 7200 RPM?
  Should I buy a new one with 5400 RPM to avoid having problems of temperature and noise?

  Please let me know your opinion and thank you in advance.
  STL

  Hello

  As you already know we can only speculate on the size of the HARD disk
  In my opinion the 160 GB would be possible. But it s just my personal opinion.

  In any case, the higher speed (7200 RPM) HARD drive should be a problem. I noticed that many laptops use 7200 RPM HDDs and 5200 RPM. So I imagine that the heat produced by the HARD drive shouldn't t increase the level of temperature at a critical level.

  Greetings

• "2 TB 7200 RPM hard drive + 32 GB mSATA Solid State Drive" is that this should be an SSHD?

  Product details bought a Dell XPS touch 27 all-in-one, please click

  http://www.Dell.com/ca/p/XPS-27-2720-AIO/PD?OC=dxps2720_ft_s2141e&model_id=XPS-27-2720-AIO

  2 TB 7200 RPM hard drive + 32 GB mSATA Solid State Drive

  What should be the 2 TB SSHD

  I check with the system and the HARD drive is ST2000DM001, is that correct?

  It does not appear on Windows:-it's a cache drive.

  You will see listed under readers in the configuration of the system (F2 at startup).

• New HDD in my Dell INSPIRON N5010 laptop, will I go to 5400 RPM or 7200 RPM HARD drive

  I bought the DELL N5010 laptop about 4 years back, and currently it is more under warranty.
  2 days back my hard drive crashed and could not start or install the OS as there are bad sectors on the hard drive has. I plan to buy a new hard drive.

  Which one should I go for a 5400 RPM or 7200 RPM. I would go to 7200 RPM, as it is faster, but I read on the internet that the 7200 RPM generates more heat then 5400 RPM and my laptop is already facing heating problem. I had replaced the fan about 2 months as my laptop used to close because of the heat. The problem of heating has not changed, but laptop does not stop :)

  Anyone using the DELL N5010 laptop with a 7200 RPM HARD drive and he's fine?

  Any kind of recommendation will be greatly appreciated.

  Kind regards

  Sach

  Thanks for the recommendation. The sales in the shop man also recommended the same thing. I bought Seagate 5200 SSHD(Solid State Hybrid Drives) which is still better than the conventional hard drive. :)

  Kind regards
  Sachin

• DV5220us will not identify Seagate 500 GB Sata 7200 RPM hard drive XP

  Hello

  Upgrade the internal HD on my DV5220us of the standard 120 GB drive at 5400 RPM to a 500 GB drive at 7200 RPM and I have problems with the laptop recognize the drive. I did a ghost of the 120 GB image and then put the image on the 500 GB. When I install the 500 GB drive in the laptop, it does not recognize it. booting with the XP cd does not recognize the drive either. I've updated to the latest version of the bios, 24 I think, stll nothing. If I use cables and connect the 500 GB as a slave drive, he sees very well and it works. If I take the 500 GB and install in my Lenovo T61, it starts fine. No idea why the DV5220us does not recognize the HD Seagate 500 GB Sata 7200 RPM? Thank you!

  T

  No one gave me an explanation to the problem. I'm actually advise to stick with a 320 GB 5400 RPM drive 500 GB 5400 RPM drives because have also been reported to cause problems. I'm sorry.

• Someone at - it problems of heat upgrade to a 7200 RPM HARD drive in a MacBook Pro 13,3 "2.5 GHz Core i5 (A1278) - mid-2012, MD101LL/A?

  HI - it would be an update of the stock 5400 RPM, 500 GB HARD drive. The 7200 drive I bought is 1 TB.  Thanks in advance for any help!

  As long as it's a SATA HDD with a 2.5 form factor ", it will be compatible.  You experience a slight increase in performance with the faster HARD drive, but it will not appear in 50% faster than the 5400 RPM HARD drive.

  Ciao,.

  Addendum: There will be no observable heat problems.  I did it several times myself on all of my 4 Mbps.

• Satellite P30-116 - 7200 RPM HARD drive upgrade?

  I intend to replace original 100 GB 4200 RPM HDD in P30 with new model 7200 RPM.

  I'm looking at any 2.5', P - ATA, 100 GB, 7200 RPM drive HARD model I can find.
  On my list are these 3 models:

  - Seagate Momentus 7200,1 (ST910021A)
  http://www.Seagate.com/CDA/products/discsales/personal/family/0, 1085,669,00.html
  - Hitachi Travelstar 7 K 100 (HTS721010G9AT00)
  http://www.HitachiGST.com/HDD/support/7k100/7k100.htm
  - Hitachi Travelstar E7K100 (HTE721010G9AT00)
  http://www.HitachiGST.com/HDD/support/e7k100/e7k100.htm

  I worry especially about the overheating problem.

  Is there someone who has experience with this drive? s in P30?

  OK, I noticed that E7K100 operating temperature 40 ° C and 7K 100 a 55 C. This avoids E7K100.
  Now I have to choose from:
  -Seagate Momentus 7200,1 (ST910021A)
  -Hitachi Travelstar 7K 100 (HTS721010G9AT00)

• Satellite L670 - 1 DG-can I use a 7200 RPM HARD drive?

  Hi all

  I have a portable Satellite L670 - 1 DG (out of warranty) and I would change the HARD 5400 RPM to 7200 RPM drive.
  It is technically possible on this machine? Is is necessary to use a Toshiba HDD (or open)?

  Thanks for your replies.
  Laurent

  Of course, you can use and must not be Toshiba HDD.
  The only thing that can happen is that this HARD drive fastest heat producing a bit more where the HARD drive is placed can so be a little warmer than usual.

  All that s.

• Equium A60 sees no 80 GB 7200 RPM HARD drive

  My Equium PSA67E has the latest version of the Bios 1.90. It comes with a 40 GB hard drive.

  When I did it I replaced it with a 80 GB seagate momentus 7200 RPM drive. This is fine for about 6 months. Recently I started to laptop and it does not recognize the 80 GB seagate drive?

  If I put the disc in the event of external drive I can write and read. It works very well in 2 of my friends laptops; but my own bios do not now recognize!

  I tried the PC world where I bought it and they can't operate in this laptop. What could change? Now only the old 40 GB drive, not happy :(

  Any suggestion is welcome.

  Hello

  In my view, there could be either a bad connection between the HARD drive and the controller or there is something wrong with the motherboard for laptop

  Have you tried to insert another disc (for example the old 40 GB HARD drive) HARD to check the functionality of the Board and the HARD disk controller?
  Please do it.

• Is it safe to install a 7200 RPM hard drive in a laptop that originally contained a 5400 RPM HDD?

  Hello.  First of all, I didn't know where to post this, so I'm sorry if this is in the wrong place.  Recently, the hard drive on my Toshiba Satellite is dead and I'm new.  I wonder if it is safe replace the dead 5400 RPM hard disk provided with the machine with a new hard drive 7200 RPM.  A few friends told me that it is perfectly safe, while others told me they burn out and possibly damage to my laptop.  What think you of all?  Thanks in advance to anyone who responds!

  Gillan - Greenleaf

  GG

  It is perfectly safe and preferable.  If you are going to spend more than $100 you can think of a SSD drive, if your computer is new enough (not XP or vista era) to benefit from.

• Considering a new 7200 RPM hard drive

  1I? I have a video on my laptop.

  5400 RPM does very well now, but 80 GB is getting crowded. I want a bigger drive. Do I need a faster drive as well?

  What are the advantages and disadvantages of installing a 7200 RPM drive in a ThinkPad R6?

  Choose with care. I didn't notice much difference between 5400 and 7200 RPM power consumption drives, but this last run a little warmer.

  If you can afford it, go with a Seagate.

  I hope this helps.

• Z420 HP: HP 2 TB SATA 6 Gb/s 7200 RPM hard QB576AA (should I plug it into a grey connector 6 GB)

  I have this hard drive and not being not SSD connected on a regular white connector on the motherboard, but apparently it can make 6 GB - should I plug it into one of the gray connectors?

  Kind regards

  SM

  To answer my own question, I talked to someone from HP support via chat, that says it is OK to use the gray 6 GB port for this drive. It makes sense, because the drive is 6 GB, I was just ignorant mechanical controls could also use grey ports. For some reason, I assumed that mechanical controls have been slower and relegated to ports white 3 GB SSD could use faster gray 6 GB ports. Curiously, when I got the machine, he had a plu SSD plugged into the port of gray, but the Intel RST console has reported the transfer negotiated for it to only 3 GB. The console confirms that the new HARD drive is to get 6 GB (with my new SSD). The two ports are busy.

• HP pavilion 2006sq g6: 1 TB Hard drive 7200 RPM for g6 2006sq pavilion

  Hello

  I am planing to buy a new hard drive for my laptop because my current is on alert

  I found this one:

  HGST Travelstar 7 K 1000 1 TB, SATA-III, 7200 RPM, cache 32 MB, 9.5 mm

  http://www.Newegg.com/product/product.aspx?item=9SIA2W02KN0922

  and wanted to know if I can use since I read the manual of the laptop, and it indicates that it supports only 5400 RPM hard drives 1 to?

  Any 1 to 7200 RPM hard drive will work with my model?

  Thank you!

  ALex

  Hello

  Thought the same thing so I decided to take a decision on a viable alternative
  WD7500BPKX
  I install windows 10 on that as we speak.

  Thanks again for the clarification!

• Refurb new Pavilion Slimline s5610f, HARD drive advertised as 7200 RPM, watch 5400 RPM in speccy

  I don't know if it was just the misinformation on the Bestbuy description because it was a refurb or Speccy reading it wrong, but I just bought the refurb HP Pavilion Slimline s5610f was supposed to have a 7200 RPM HARD drive according to everything I read.
  This is the profile for HP http://h10025.www1.h...R1002_USEN#N455
  Here is the description of BB http://www.bestbuy.c...da914375cf8en02

  I looked around and everything indicates that the device of WDC WD64 00AAKS-65Z7B0 as being 7200 RPM SATA drive. Speccy also lists it as a 2 MB cache, which I don't think is correct, should be 16 MB, but I'm not too sure.

  Any help would be appreciated, as other ways to identify the number of towers disk and memory cache.

  Also wonder about this part of the form: data C7 Ultra DMA CRC Error Count 200 (177) 0000000019

  Who's 19 errors for the duration of the training?

  Of Speccy:
  Hard drives
  WDC WD64 00AAKS-65Z7B0 SATA drive
  Manufacturer Western Digital
  Business Unit / Desktop/WD Caviar® brand
  TR/MIN/Buffer Size or attribute 5400 RPM with 2 MB of cache
  Heads of 16
  16383 cylinders
  Type II-SATA 3.0 GB/s SATA
  Type of appliance fixed
  ATA Standard ATA8-ACS
  LBA 48 bit taken in charge
  Serial number WD-WCASYF167563
  Interface SATA
  625 GB
  full size 640,135,028,736 bytes
  Zero Type RAID
  S.M.A.R.T
  01 Read Error rate 200 (200 worst) features 0000000000
  03 spinup Time 162 (162) data 0000001324
  04 start/Stop Count 100 (100) data 0000000020
  05 reallocated sectors to count 200 (200) data 0000000000
  07 seek Error Rate 100 (253) data 0000000000
  09 hours (POH) powered 100 (100) given 000000001 B
  Spin Retry Count 0 to 100 (253) data 0000000000
  Attempts to recalibrate 0 b 100 (253) data 0000000000
  0c device Power Cycle Count 100 (100) given 000000001 has
  C0 Power-off retract count 200 (200) data 0000000007
  C1 Load/Unload Cycle Count 200 (200) data 000000001F
  C2 Temperature 118 (109) data 000000001D
  C4 number of events of reassigning 200 (200) given 0000000000
  C5 Current pending sector count 200 (200) given 0000000000
  C6, Incorrigible sector County 100 (253) data 0000000000
  C7 Ultra DMA CRC Error Count 200 (177) data 0000000019
  C8 write error rate / multi-zone error rate 100 (253) data 0000000000
  Temperature of 29 ° c.
  OK (less than 50 ° C) temperature range
  Good condition
  Partition 0
  Disk #0 Partition #0 partition ID
  Size of 100 MB
  Partition 1
  Disk #0 Partition #1 partition ID
  C: drive letter
  NTFS file system
  Volume serial number E4AF596B
  584 GB dimensions
  Used space GB 30.5 (6%)
  Free space GB 554 (94%)
  Partition 2
  Disk #0 Partition #2 partition ID
  Letter from D: drive
  NTFS file system
  Volume serial number 829DB1F3
  12.1 GB size
  Used 10.6 GB of space (88%)
  1.47 GB of free space on the (12%)

  Ask yourself why the unit was refurb can be intimidating. It's only cicra July2010.

  You perform these maintenance issues:

  Checkdisk http://www.howtogeek.com/howto/windows-vista/guide-to-using-check-disk-in-windows-vista/

  scannow http://pcsupport.about.com/od/toolsofthetrade/ht/sfc-scannow.htm

• After the upgrade 320 GB sata 7200 RPM to 256 GB transcend drive ssd

  my computer information are:-

  1 probook 4420 s (14 ')

  2 processor 2.27 ghz-core i5 430 m first generation (3 MB cach-64 bit)

  3 ram 8 GB 1333 bus (after upgrade)

  4.OS - windows 8.1 pro 64-bit.

  5.HDD - 256 GB transcend ssd after upgrade (after was Hitachi 320 GB 7200 RPM)

  _______________________

  My Question is...

  1. I used HP 3D guard player when use Hitachi 320 GB 7200 RPM HARD drive.

  NOW, I want to know to use 3D software guard drive after upgrade SSD HARD drive?

  3d can damage the SSD or custody of drive?

  because after upgrade windows 8.1 Pro, in Device Manager it show unknown device '? After installation 3d player it keeps show OK. !

  That's why I want to know is - this safe for the SSD or not?

  Hello

  There is no need in fact HP 3D DriveGuard for one SSD as there are no moving parts - this application is not relevant to a mechanical hard drive, where sudden movements, detected by the accelerometer cause the drive heads be "stored" in damage to storage media.

  However, as your machine has an "accelerometer" leaving this driver installed will not affect the function of your SSD and prevents the Device Manager appears an 'unknown device '.

  Kind regards

  DP - K