G505s random stop

Similar Questions

• HP: Laptop randomly stops when it hits 15%

  He started only today. My laptop would randomly just turned off when the battery was low. When I checked the percentage it shows 15% when I turn on my laptop. I already checked power options, and everything is normal. I was wondering if anyone has solutions to this. In addition, I notice just that my phone would not charge from 90 percent. It would charge up to 90%. Thanks in advance.

  Hi @davevidduong,

  Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that your laptop randomly stops when the battery is low. It will be a pleasure to help you here.

  A remarkable work has been done by checking the power options. You did awesome troubleshooting before you post your question in the forums of HP. It's always a great pleasure to work with tech-savvy and technically customers sounds like you. Kudos to you for this. I am amazed at your technical skills and levels of technical knowledge.

  For clarity, I would need more information to help you best.

  Please let me know the product # computer.

  Have you checked if it stops when the charger is connected?

  This could be a hardware problem with the battery and we need to insulate it properly. In the meantime, please try a hard reset first. Steps to follow:

  • Turn off the computer and unplug the charger. Then remove the battery only if it is removable.
  • Press and hold the power button on the unit for 15 seconds to carry out the static electrical charges inside the machine.
  • Replace the battery and the charger plug it back.

  Then visit this link to update the bios and HP support assistant. Link: http://hp.com/drivers please select the country and follow the on-screen instructions. Once this please visit this link to run hardware diagnostics on the battery and other components. Link: http://support.hp.com/in-en/document/c03467259 if please run full diagnostics and note any failure code if a component fails. Mainly to run diagnostics on the battery. According to the information that you could later calibrate the battery.

  I really hope things the excellent work and the problem is solved without hassle. I hope this helps. Please let me know how it goes. Just to say thank youPlease click the ' Thumbs Up ' button to appreciate my efforts. If it helps, Please mark this "accepted Solution".

  Take care now and have a week coming Holy.

• keyboard randomly stops working and continues after reloading safari. Running El captain

  wireless keyboard randomly stops working and continues after reloading safari. Captain El running. He did once, using Word as well. On the occasion when his order in safari it works in Word and then stops again.  Y at - it a cache keyboard or something that needs resetting? Any help would be welcome.

  If your USB keyboard or wireless does not work

  Keyboard does not work

  Keyboard/mouse - troubleshooting wireless

  Reset an Apple Bluetooth mouse or Trackpad wireless keyboard (pairings and other common troubleshooting problems)

  Bluetooth devices no longer meet

  Sources of interference Bluetooth

  Sources of interference of Bluetooth (2)

  If your Wi - Fi connection is able to generate a 5 GHz signal, try this.

  Restart your computer, hold down the option/alt - P - R keys command before the gray screen appears. Continue until you hear the startup chime for the second time.

  Reset the NVRAM EXTRA memory

• X 201 random stop with new battery

  Hi all

  I use my X 201 for 4 years now without any problems. The original battery is tuyanteries out, I replaced it with a 9Cell Duracell (Sanyo) one.

  Since then and only when I use the new battery, this disconnected, my laptop randomly stops without warning. No overheating problem.

  Win7 newspapers pointing powerfailure (power core to restart shows error 61)

  (I have no idea) the reason for this behavior odd ii) the remedy

  I would gladly buy a new Lenovo battery if only I was sure to solve the problem...

  best regards and thanks!

  Christophe

  .

  Hi all

  I contacted the community because my new Sanyo battery would be suddunly and turn off at random, causing of course my Thinkpad X 201 to close.

  Here's what I found: aft uf the battery, there is a slide button to lock it once you insert it into the battery tray.

  On battery 6cells, simply insert, yo hear a click, and the battery is locked.

  On the battery 9 cells (at least on the shot I bought) the sliding button must be moved manually to the "Locked" position If you don't move it, the PC starts normally, but stops abruptly after 10, 30 or 50 min, come anytime.

  Problem solved. I hope this can help!

  Christophe

  (PS: I'm not really proud to have alerted the community on such a beast detail... apologies and thanks to x220forMe who provided valuable advice!)

• HARD drive randomly stops

  Then, I had this problem for about two months now, increasingly more often.

  My laptop (Pavilion Dv6 - 1350eb) would just freeze or stop for no apparent reason. because it was during the course of the demanding graphically programs (inventor/autocad) I took the laptop overheated.

  then it started to happen when my laptop fell asleep - it would break, en no error no reports were given.

  last month, that accidents are extremely common, sometimes my laptop does not even (HDD led flashes orange)

  and I sometimes get error reports.

  disk tried to write in the ROM, irl not equal and other errors
  .

  After reinstalling my OS, the problem persists, so that's where I think that the HARD drive is broken - analyzes the hard drive with the startup check fails every time.

  So now, I bought a new HDD (same brand, same model), and my laptop does exactly the same thing; randomly stops running, no error message, hdd led, flashes orange when restart.

  Any ideas what this could be?

  Baru,

  I'm glad to hear that you're getting it taken care of.

  Accumulation of heat and the failure of HARD drive are some of the main reasons for freezing.

  The heat can be the thermal paste that need to be replace, the fan who needs to be replaced or maybe even just to clean the system with a can of compressed air and get rid of dust inside the system.

  I would like to know how everything goes.

• Get the random stop downs and error blue screen

  Original title: need help with 2 problems

  OS: Windows vista Home premium 64-bit

  Laptop HP dv 9000

  #1: random stops or blue screens, screens of plaid, split screens, etc. after its judgment, requires the restore to the restore point

  #2 error 10 w /! (yellow) verified "WPD files impossible to install system volume driver" starts pilot; driver update (says it is updated)

  technologically challenged both need very specific assistance/instruction; Thank you

  Hello

  Did you change your computer?

  I suggest you to follow the steps from the links and check out.

  Method 1:

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

  Method 2:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Why has my laptop started to randomly stop before turning off

  Original title: computer power questions

  Why has my laptop started to randomly stop before turning off? I had no problem with this computer at all for more than a year. I tried to run all the updates available, but of course, it turned off before she finished. Sometimes it will run fine then others that it is a nightmare. can anyone help please? I would be very happy to help!

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way?

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
  air vents. Check that fans are working (before and after opening the case). When your laptop on all the
  You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
  test).

  This sounds like material so if the above does not help you then probably need the help of a
  real computer store (not of leeks and glances at a Best Buy or other department stores) or the system
  Support from the manufacturer.

  ===========================================================

  Check with these utilities to see if information may be collected: BlueScreenView run to see if
  There were some BlueScreens and MyEventViewer at the time, check if the stop (or a little
  seconds before) see the event log contains useful information.

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ------------------------------

  Also do this so you can see the probable bluescreens. (You may or may not be able to see
  them if they occur even after doing this according to the cause.)

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  =========================================

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  =========================================
  =========================================

  More if needed and you think that the closure could related to the Options of food or sleep.

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• BlackBerry Z10 STL100 10 - 1 AFTER the 10.2.0.242 of the ISSUE of the RANDOM STOP

  After 10.2.0.242 my phone gets stop randomly and does not start. I have to connect it to the charger and it is started after 15-20 minutes. the question is random stop, as in any application, any time, it will stop and take the time to start. Is there any fix for this that it is my first camera for my work.

  I can suggest many things, but everything will be ' a shot in the dark "without this test result, and buy a new battery is not the best way to conduct this test (such as the States of my post).

  So, you might try instead a recharge of OS, since the problem started when you tried this before. I suggest you:

  1. Full backup (see the link in my sig auto, but that applies to the inheritance, but the idea is the same, especially on the manual list of things)
  2. WIPE
  3. OS Reload link
  4. WIPE
  5. Initial configuration
  6. See if the problem, if not then go ahead... If it, then return to step 2, but instead LINK in step 3, find an autoloader to reload the OS (other versions of the operating system are also available through automatic charger
  7. Begin to return your applications and configurations, one at a time, slowly to determine whether one is perhaps the cause
  8. Restore from your backup

  If the problem clears up with that, it was something that was wrong during the OS update, you did. If you need to return to automatic charger or other versions, the version of the OS you are using is corrupted somehow. If the problem comes back after you restore, then something in your backup is the cause, and you will have to redo do everything but not the restoration.

  Good luck!

• MY VAIO LAPTOP(VGN-CR353) RANDOMLY STOPS AND TAKES MORE TIME TO START. SOMETIMES IT STOP WHEN STARTING

  MY VAIO LAPTOP(VGN-CR353) RANDOMLY STOPS AND TAKES MORE TIME TO START. SOMETIMES IT STOP WHEN STARTING

  It seems that the laptop may be overheating.  Are you sure there is enough air past for laptop?  Make sure that it is on a flat surface, with nothing to obstruct the ventilation openings.  Make sure that the vents and fans and heat sinks are free from dust - examine their blowing with compressed air (power of the system first, of course).  Depending on the laptop model, it may be relatively easy to blow off the dust with compressed air, or otherwise clean up things a bit.   Fans should be kept up well - only no right turn when being ripped off.  My Dell laptop has a removable fan (two small screws need to be removed) that can easily be blown.  This also allows access to the fins of the heatsink.

  Some laptops also have a removable filter that traps the dust and must be regularly inspected and cleaned.

  Are all the BIOS settings for the adjustment of the temperature, the value lower than the manufacturer's recommendations and the default values (you need to check the manual of your laptop for this).  Also make sure you run the latest version of BIOS (again, the manual of your laptop would have the details; the manufacturer's website should also have this information).

• My cut copy and paste keyboard shortcuts has randomly stopped working

  my shortcut keyboard + x, C and V control has stopped working. I did not intentionally anything to turn them off, and after reviewing all the net for a solution I thought I would ask here cause I'm really at a loss

  Hi Crusix,

  Welcome to the Microsoft Community and thanks for posting the question. I understand that the keyboard shortcuts cut copy / paste randomly stopped working.  Let me help you with the issue.

  1. What is the brand and model of the computer?

  2. what security software is installed?

  3. don't you make changes to the computer before the show?

  4. What is the brand and model of the keyboard?

  To resolve this issue, let us try these methods:

  Method 1.

  Connect another keyboard and check.

  Connect this keyboard on another computer and check the status.

  Method 2.

  Try to use the on-screen keyboard on and check.

  Type without using the keyboard (on-screen keyboard): http://windows.microsoft.com/en-US/windows7/Type-without-using-the-keyboard-On-Screen-Keyboard

  Method 3.

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  I hope this helps. If you need further assistance on this particular issue or any other related issue Windows let us know and we will be happy to help you.

  Thank you.

• Keyboard and mouse randomly stop working

  My keyboard and mouse just randomly stop working. My indicator DPI mouse will blink for a few seconds, then none of them works. Regardless of what I ' do on my computer at the same time, normally it occurs smack dap in the middle of a game. But it can happen at any time, train to start my computer, hours after. I tried to reinstall all my drivers, hard reset my USB ports, and reinstalled windows, nothing has helped me. Also, if I play a game, nothing changes except the fact that I can't move my mouse or my type anything with my keyboard, if I am skpying with someone, my audio and microphone works perfectly fine, I just can't use my keyboard and mouse. My mouse and keyboard are standard supplied with my computer, the Studio XPS 8300. Regardless of the mouse I use, this always happens.

  Hey Cameron,

  Please contact Microsoft Community.

  It seems that you are facing problems with the keyboard and the mouse. Were there any changes made on the computer before the show?

  Follow these methods to solve the problem:

  Method 1:

  Run the hardware and devices Troubleshooter and check if that helps.

  You can also try to run Dell Diagnostics of material.

  Method 2:

  I would also say you update the drivers for the chipset for the computer and see if it helps:

  http://www.Dell.com/support/drivers/us/en/19/product/XPS-8300

  I hope this helps. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• I get random stops with my recordings on Widows Media Center.

  Original title: Smart TV with Windows Media Center Recordings interference

  Since the installation of a new Samsung Smart TV (model UN46ES8000F) I have been making random stops with my recordings on WMC.  Because there are a lot of tuners and available memory at the time where the records are arrested, they record not 'conflicts' in the sense of the WMC.  Records are simply stopped manually at random times when recording provided by another component on my computer in the home network. Today, I tried to reload WMC, a full charge of Windows 7, complete diagnosis on all equipment running & exchanging a few components; But starting today, I was not able to specifically identify the component that prevents the records, however, I begin to suspect the smart terminal on the new TV.  I have photos available of history showing the partial records should anyone want to consult them.

  Description of the system: I use wired (Cat5E) Linksys DMA 2000 ex distribution TV recorded on my first HDHomeRun in 4 different rooms in my house since my computer Dell XPS420 (under Windows 7 Ultimate) via a D-link DGS-2205 gigabit switch.  The Smart TV is connected to the internet via my router D-link DIR - 655 Wireless-N.

  Everyone knows about this problem, and no one knows a way to solve it?  Do not hesitate to contact me directly at * address email is removed from the privacy *.

  I too began to see problems with my Windows 7 Media Center after buying a "smart tv".

  I am using an HDHomerun Prime with 2 pc for more than a year and practically no problem.  Now, I use it with a Ceton Extender so... no problem.  But when I got my first smart (a 55 '' TV LG LED 120 MHz) model, the problems started.

  Whenver my new flat screen is connected to my network (cat6, 1000Mbps), I noticed a ton of problems with my 3 tuners.  All three tuners "disappear" and whatever program I was watching would freeze.

  I didn't record something while my smart tv is connected to my network, so I can't say I have the same problem you are having, but I sincerely believe that we are the same.  For the sake of arguments, if I recorded something, it probably would have stopped.

  I agree with you 100%.  I think the smart TV is guilty.  I think the problem is our TV are the first hdhomerun and treat it as one product DLNA.  Under my smart TV App menu, I can see the shared folders on various pc's on my network (music, videos, etc.). .. as well as three files for each tuner hdhomerun main!  When I click on one of the tuner, my TV resets icon.  Something tells me that when the smart tv is connected to my home network, he's trying somehow communicate with three tuners and which is originally the tuners to freeze.

  If Silicondust would somehow a patch update or firmware to avoid the first appearing as a product DLNA, which can solve our problems.

  I think that Silicondust would be able to help you with this problem.  I doubt that microsoft technicians will have a clue.

  The silicondust techies will be most useful, especially since they want to certify our hdhomerun first tuners like DLNA Certified products as we speak.   If you do a search on the web for first hdhomerun and DLNA, you will see an article/news update on progress.

• computer randomly stops... no blue screen, everything stops and goes to sleep

  I have a HP 64 bit, the computer randomly stops, no screen blue, everything stops and goes to sleep... I had 2 technicians to look at, but since it is random, they have been unable to find something that would make this...?

  Select Start, Control Panel. Action Center, click on the down arrow to the right maintenance, click view reliability history. In the chart, you will see red orbs, click on one and it gives details and to the right are another link saying see technical details. You can copy and paste the description in a new message to. Repetition of reports are more relevant than the one off of problems.

• Music player randomly stops

  When you use the music player, since the 1.3.1 update the app suddenly stops working. I have to leave the app, then open again to get the music going again.

  All solutions?

  Finally figured this out.

  If you are in iTunes and sort your music by genre (it's in the display options)

  You will see that your music player randomly stops when it reaches the protected music files.

  You need to convert them into MP3 or AAC normal files that are not protected (usually burn to CD and re - rip with iTunes).

  Once all your files without DRM and the music player will not work correctly.

• Mid-2012, MacBook Air of random stop

  I tried to find a solution to more than a year. My MacBook air has been cutting randomly without warning.

  At first I thought it was overheating, so I installed Mac Fan Control and cranked up the fans, but it always stops around 60-70 ° C temperature of CPU, which should be good. The first three years, I owned the computer I never had a single problem and the fan never accelerated where she was audible 2 times.

  The error code in the log files is Cause of previous stop - 2, which I can't find a description of anywhere.

  I took the computer to the Genius Bar for a verification of the material, but the computer turns off as soon as they are trying to run the test. They wanted to change the logic board for $600 + then I said that I think about it.

  If anyone has experienced this? I can find no solution confirmed online and don't know if I have to replace the logic board or card IO first. When he died, it's like it lost power. Immediately turns off. It will not restart for at least 20 seconds, and if I turn on for a few minutes it turns off again before moving on to the screen. However, it will work perfectly sometimes for up to an hour or two.

  The computer was pampered life whole and never dropped or spilled on. Looking inside, it looks fine, but tbh I don't know what I would look for.

  If anyone has any ideas at all, I'd like to hear them. It's a mid 2012 Air i5 with 4 GB of RAM.

  EDIT: Also, I did the resets of SCM, this does not solve the problem.

  How the MBA does not work when you start mode safe?

  https://support.Apple.com/en-us/HT201262

  If you can, run an Apple Hardware Test:

  https://support.Apple.com/en-us/HT201257

  Note that an error free AHT is inconclusive.

  Check if there is any panic the kernel has registered.  If so, login and post it by these instructions:

  https://support.Apple.com/en-us/HT201753

  Ciao.