G550 - shortcuts no longer work

Similar Questions

• Desktop Shortcuts no longer work on winxp

  Desktop Shortcuts no longer work on winxp.

  My Shortcuts no longer work on any of the acc on my computer please hlp? !!

  Hi Ktoffetti,

  1. Did you the latest changes on the computer?
  2. What happens when you try to access the shortcut on the desktop?
  3. You receive an error message?
  4. You have security software installed on the computer?

  Method 1

  See the link below and run the fixit tool, check if it helps.

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  http://support.Microsoft.com/mats/system_maintenance_for_windows/

  Method 2

  If the previous step fails, then check if the problem persists in the safe mode and after return with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 3

  If the problem persists in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

• The Panel and the desktop shortcuts no longer work after the virus

  Originla title: shortcuts does not.

  The Panel and the desktop shortcuts no longer work!  I had other users on my computer and maybe a user to a virus?  I can open programs, but must do so by opening a file written by the program (for example, to open a Word file to get term; to open TaxCut to Taxcut) can anyone help?  (Uses can I have XP Home Edition.)  I tried the system recovery, but that has not fixed the problem!

  Hello

  · What is the number and the model of the computer?

  · You have security software installed on the computer?

  · What happens when you try to open the files?

  · You receive an error message or error code?

  1. follow the steps from the link below: cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP computer: http://support.microsoft.com/kb/923077

  2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• The item 'xuiexi.scr' that this shortcut refers to has been changed or moved, so this shortcut no longer works correctly

  Original title: problem with the shortcut "xuiexi.scr".

  When I try to open my files I get a notice that says: PROBLEM WITH SHORTCUT.  The item 'xuiexi.scr' that this shortcut refers to has been changed or moved, so this shortcut no longer works correctly.  You really want to remove this shortcut?  YES / NO

  What can I do to recover these files.
  Thanks in advance for any help.
  NW

  Hello

  (1) remember you to make changes to the computer before the show?

  (2) is that limit this issue when opening specific programs?

  You can perform the following methods.

  Method 1: I suggest you to run the Microsoft Fixit article.

  Fix broken desktop shortcuts and common system maintenance tasks: http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

   
  Method 2: Run Virus Scan

  You can download Microsoft Safety scanner, which provides on-demand scan, and remove viruses, spyware and other malicious software. It works with your current antivirus software.

  See the link below to download Microsoft Safety scanner on the system.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note:
  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  WARNING:
  The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.
   
  It will be useful.

• Dell SK-8135 keyboard shortcuts no longer work?

  Hello!

  Thus, for some time I use a fairly old multimedia keyboard with some registry changes simple to customize shortcut keys multimedia fantasy located here:
  HKEY_LOCAL_MACHINE / SOFTWARE / Microsoft / Windows / CurrentVersion / Explorer / AppKey
  In the folder AppKey are 5 folders with the registry values corresponding to functions for 5 different keys. Sometimes in the past 3 weeks after Windows Update updated (I try to do often enough), Windows broken, or ceased to honor these values/functions.
  Example: the music button would open my Media Player of choice, instead, it opens Windows Media Player; and the electronic key should open a Notepad window, but instead opens with an error 'current assignment for this key is not available.
  It is worth noting that the "Microsoft mouse and keyboard Center" shows only one media key, and its modifications do not seem to be recognized by Windows.
  Oddly enough, I can get the shortcut keys to work again temporarily. If Windows has open Regedit.exe, the keys are functioning normally; However if I focus Windows away from this window (even if it is still open) they break again.
  These functions have the new registry values maybe? If Yes, where are they?
  Thank you
  SirGir

  Update (22/06/13): randomly found the answer! For all of you who have this problem in the future: just uninstall the "Microsoft mouse and keyboard Center", it is right in the menu uninstall programs. He fixed everything!

  The usefulness of keyboard Dell QuickSet controls special keys for of many valleys PCs, but I don't know if it has the same name on your PC keyboard combination.

  You should be able to confirm the name by checking in C:\Dell.  Mine has a subfolder called QuickSet conatins three files exe: QuickSet.exe, Battery.exe & MobilityCenter.exe.  Battery.exe & MobilityCenter.exe are the standard names, search for the third exe in the folder that contains them.

  If adjustment has been corrupted, then it will not make reference to these registry settings correctly and therefore your direct use of these parameters is inhibited as well.  Is not that I heard someone's done this before, but the logic of it seems to fit.

  Find a new copy of the quick adjustment on the site of Dell support, drivers & downloads for your model and install it.  You must not delete the existing one first unless the installation file or its instructions page say you.  I guess you have to put your custom in these registry keys subsequently as quick adjustment values installation probably crushes them.

  I can't explain the part about moving the slider of the RegEdit window - which is pretty weird.

• Double click of the mouse on the desktop icon shortcuts no longer works.

  Suddenly my mouse can move screen on the desktop page but double click on shortcut icons has no effect.  Must go to the bar at the bottom to open applications. Once in the application, the mouse works is great.  Problem is just Office page.  I have the edition of Windows Vista Edition Home Premium with a Norton security suite.  I restarted the system several times with no change in the problem.

  John of Kuyper

  ********

  Suddenly my mouse can move screen on the desktop page but double click on shortcut icons has no effect.  Must go to the bar at the bottom to open applications. Once in the application, the mouse works is great.  Problem is just Office page.  I have the edition of Windows Vista Edition Home Premium with a Norton security suite.  I restarted the system several times with no change in the problem.

  John of Kuyper

  353-561-4307.

  Try this...
  Start button > in the search box, type folder options > press the Enter key > general tab, under click items position as follows, click on the radio in front of double-click to open an item > OK for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• The item this shortcut referred to has been changed or moved, so this shortcut no longer works correctly.

  I created a folder on my desktop and files of the copied image on my SD card in the folder newly created on my desktop. This issue has apparently disappeared without a trace as I used it and I can not find anywhere on my laptop.  I do not at any time to delete this file.  It was in the trash, simply disappeared.  I am in desperate need of their return.  Can someone help me find my missing folder?

  This message means that you has not actually copied the file to the SD card, but you rather than a shortcut for it.  So it only works when the SD card is connected.  If the SD card is removed, you will get this message.

• Animate CC: eoom shortcuts no longer work

  Hello

  You use the English version on PC French, I lost shortcut zoom, that I can't live with (Ctrl 1,2,3..)

  Those who were OK with CC English 2015 on system French.

  Any idea?

  Thank you.

  If you notice, the old shortcuts have been the variation non - shift key. Any chance you keyboard shortcuts long ago? You could do now and 400% do Ctrl - the value "instead of Ctrl-4. Just to match all the shortcuts CS6.

• Pavilion dv6 synaptic touchpad disable the shortcut no longer works

  Hello

  I had a few problems with this computer, tried everything finally uninstalled and reinstalled windows (7).

  I used to use the shortcut fuction - double click on the upper left corner of the synaptics touchpad to turn it on and the.

  Because windows was re-installed the shortcut works more I can't turn it off! typing is horrible cause I keep hitting the button accidentally and my mouse goes everywhere, but I need to turn it on as well for when I do stuff on the show without the mouse.

  I think the guy who re-installed windows for me disabled an option because I cannot get the biometric finger-key thing to work now.

  Please someone tell me how to activate the shortcut touchpad option on! I looked under "mouse" in the control panel and tried to search for "touchpad", etc. "synaptic" in the start menu;. but no dice.

  Please, this is driving me nuts (taken as 20 minutes to write this)

  Hello

  First, download the latest installer driver Synaptics, on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55107.exe

  Then, open windows control panel, open programs and features, If you see an entry for "Synaptics Pointing Device Driver", right click and select uninstall.

  When this has completed, restart the laptop.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Now, you need to configure the touchpad as described in the HP document on the following link.

  Configure the ClickPad.

  Kind regards

  DP - K

• Hot keyboard shortcuts no longer work

  Hello, I use Photoshop CS6 often for digital painting. Gradually in the course of the last year and a half since I bought all of the creative suite, I met more small problems. The most obvious is the loss of some hot keys - mainly the keys to support commands.

  The keys to support stops responding after only a few seconds of painting. But I can't make them work again if I mount my cursor and click on an empty space on the toolbar. However, immediately as I still paint on the canvas they date back to be non-responsive.

  Really, it disrupts my workflow and is incredibly frustrating. I run on a Mac, now with Didier (the problem before the software update) and a Wacom Intuos 5 environment.

  Thank you.

  Install the plug-in white window will get the shortcuts work as expected

  Menus, shortcuts, Lasso tool or Photoshop constantly run when using a Wacom tablet. Mac OS

• Yahoo Mail keyboard shortcuts no longer works

  Normally when you use Yahoo Mail with Firefox, I use keyboard shortcuts for underline, bold and italic. Now, when I type CTRL-U I get 'PAGE SOURCE' everything in CONTROL I did appear BOOKMARKS. The absence of underscore shortcut is something serious because there is no corresponding button. I have change this shortcut from the SOURCE PAGE, to avoid the conflict, but that does not change. Any ideas?

  Just to update you on Yahoo-Firefox shortcuts, as of yesterday, things returned to normal by themselves - thank you anyway for your help

• The "SuperAntiApyware.exe" element has been changed or moved. that this shortcut refers to has been changed or moved, so this shortcut no longer works correctly.

  Guy good day

  
  

  It's even happened to itunes, revouninstaller, even firefox. at this time im using malware bytes, it scan 1 item infected and now it is (no response). IM using vista Home premium. one more thing, it is that I have download a so called tuneup utilities 2009. same thing happened, and I'm trying to uninstall, it says I need admin. I saw him in unistaller Panel controll as 'unspesified '.

  
  

  systoms. Windows Explorer stops working.

  Windows Defender has encountered problems and closed.

  my monitor screen faded White Tower.

  He lags behind more.

  most of the programs cannot be installed, same free microsoft product that I received from this forum.

  one last thing, is there a way where I can restore my computer all by default, I mean from the beginning? I just want everything.

  
  

  will anyone help me pls I can't use my laptop properly.

  
  

  I gladly appreciate it. Thank you...

  Hello

  Acer support will also be instructions online and each manufacturer has its own recovery procedures.

  Acer - USA - Service and Support - drivers
  http://us.Acer.com/Acer/service.do?LanguageISOCtxParam=en&CTX2.c2att1=25&CountryISOCtxParam=us&ctx1g.c2att92=447&ctx1.att21k=1&CRC=3618978704

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  You mean reinstall the OS completely? If you have Vista DVD you can do however make sure to
  totally your data off the drive of backup, and you need to reinstall your programs. If you do not
  Disks of Vista, you can buy them in your machine to cheap system. If you don't care about existing programs
  Then you can make a complete new installation - just select the format options that erases the entire disc (this
  Clears all data as well).

  Some system manufacturers use Partitions recovery and other methods to allow you to go back to a
  completely new facility. So check with your system manufacturer to see what options you must do
  - and it's certainly doable - just a question of the process the manufacturer of the system set in place to
  you.

  What are the system recovery options in Windows Vista?
  http://windowshelp.Microsoft.com/Windows/en-us/help/2b3724d1-f4ad-5b26-16dc-3e9e66f4be5e1033.mspx

  This tells you how to access the System Recovery Options and/or Vista discs
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  ------------------------------------------------------------------

  How to perform a repair for Vista Installation (this keeps your data if the backup off the)
  Player is safe)
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  How to do a clean install and the installer with a full Version of Vista - this erase ALL programs and data on
  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  This tells you how to access the System Recovery Options and/or Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to do a clean install with a Version upgrade to Vista - this wipes ALL programs and data on
  http://www.Vistax64.com/tutorials/68767-clean-install-upgrade-Vista.html

  How to do a Custom Installation of Vista - this is a clean install should, however, save your data
  http://www.Vistax64.com/tutorials/241565-custom-install-Vista.html

  Upgrade to another edition of Windows Vista - this should keep the programs and data
  http://windowshelp.Microsoft.com/Windows/en-us/help/3af7e05f-4d2a-4af7-A168-9242f9093bb81033.mspx

  Installation and reinstallation of Windows (upgrade - store programs and data or New Installation that removes them)
  http://windowshelp.Microsoft.com/Windows/en-us/help/e77344fa-e978-464c-953e-eba44f0522671033.mspx

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Zoom shortcut no longer works in Photoshop CC?

  Command-bar spacing & Option + command + SPACEBAR doesn't work when the hand tool is active... It is used to do at any time. Does anyone else have this problem? I saw people having this issue up to 2011, but none of the "fixes" have worked for me.

  I just transferred everything from my old macbook pro (where it worked fine) to a 27 "new iMac. I use a (NON-BLUETOOTH keyboard and razor WIRED mouse) which is what I used with the macbook pro. I have also uninstalled/installed PSCC and IllustratorCC. BTW, it does not work in Illustrator.

  OK, I fixed it. The iMac wasn't properly grateful for my keyboard... I guess that was the origin of the problem. Use a Bluetooth keyboard and trashed the old bluetooth profile and paired with the imac again and everything is good. Thanks to all of you for help.

• the "AcroRd32.exe" item that this shortcut refers has been changed or moved, so this shortcut no longer works correctly.

  When I installed Adobe 9 I do not think it installs completely? Why, the box disappears, when I click the icon on the desktop I get the previous error. Help.

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  They will help you with your question in Forum Vista programs at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• When I drag and drop or delete or move a file in a different way, it remains in the place where it is and its shortcut no longer works, and a working copy of it appears where I wanted to put it.

  is this a virus? I tried restoring the system several times and it doesn't have this problem. Help, please

  After inspection, everything moves, except that I have to close and reopen the file window to display all changes and I have to log off and turn it back on to see any Exchange Office.

  Hi Colton

  It resembles a kind of refresh issue?

  The next time you move a file and see this problem, try pressing the F5 (refresh) to see if this solves the problem.

  Let us know the results.

  Ragards