G570 user guide is out of the Office - could not find a site

Similar Questions

• The system could not find the environment option that was entered.

  I have Vista Home Premium. I must have met a significant corruption or a virus. Here's what the system won't let me do.

  System restore
  Launch any program exe
  run cmd as administrator
  launch msconfig
  Basically, everything I download don't throw (including several ladies virus recommended this forum and others)
  If it's a virus, he got by AVG free edition
  Safe mode does not enable all the options I get always "the system could not find the environment option that was entered."
  It of almost as if someone really took time to reflect on how to thwart an attack and then implemented in the opposite direction.

  Is blowing the entire disk and back at my only option?

  Help!; 0

  Zitouni,

  Thanks for your reply, good point on the File Checker, I didn't know that. Unforuneatly I have not see your reply until I decided it was time to re - install the system. One thing to note, I couldn't do a 'run as administrator' anyway possible. This system was really corrupt which leads me to believe that he may have been a NTFS/Fat 32 Co-mingling question. Just a guess, but I really don't see how it could have happened otherwise.

  Another thing to note, if you have a Dell Inspiron 1720 with a 250Gig HD-make sure that you format the partition, you then load the SATA drivers! Also, make sure that the restore partition does not primary. Make sure that you format (assuming that you have backed up your data before!). Otherwise, it hangs on Setup to complete the installation. Who took me ahwhile to understand.

  Everything is cool now (reinstalled Vista), just thank ful there is a site like this to run things by! ;)

  Concerning

  Jeff

• At startup, getting the error - the system could not find the environment that was entered

  I have Windows Vista Home Premium and I have the OS on my hard drive with no CD. I get the following error message when I start my laptop on the desk. The system could not find the environment that was entered. What can I do to fix this?

  The only answer I found in Google:
  http://UK.answers.Yahoo.com/question/index?QID=20100411034348AAALd89

  Your laptop you happens to be a Sony Vaio? What model?

• Cannot start service on local computer print spooler. Error 2 the system could not find the file specified. Please need file spoolsv.exe

  Ould does not start on local print spooler service. Error 2 the system could not find the file specified. Please need file spoolsv.exe

  Hello

  I suggest you try to launch the fixit of this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  It will be useful.

• "I received a message to activate the firewall of windows as important, but when I try to turn it on it gives me" the systerm could not find the environment option.

  #corrected "tehe systerm could not find the environment option" in the title

  "the system could not find the environment option"

  Hi nickzino,

  (1) what is the complete error message you receive?

  (2) since when are you facing this problem?

  (3) remember you to make changes to the computer before this problem?

  Method 1: Let flow the fixit available in the link below and then check

  Security Warning: the Windows Firewall is disabled

  http://support.Microsoft.com/kb/2288085

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• __why my computor still says the system could not find the environment option that was entered when I trey to change settings or load a new program

  the system could not find the environment option that was entered

  Hi Yasish.P,

  Thank you for using the Microsoft Windows Vista Forums.

  I will need some additional information to help you best.

  O when you get this error message?

  Meanwhile, analysis of auditor of file system (CFS) that might help you resolve the issue.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, the following line, and then press ENTER:

  sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.

  Follow the instructions in the link below for more information on scan SFC.

  http://support.Microsoft.com/kb/936212/

  You can see the link below for more information.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/aa301b37-e6b9-4f8c-B812-3ba2c58e1442

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• WebWorks & ripple: package & sign: cannot sign the application - could not find signature keys

  Hello

  I am developing a prototype for my company using ripple and Webworks.

  If I package it without signing my BB returns an error "must sign this."

  If I try to sign, I get an error "cannot sign the application - could not find signature keys.

  Somewhere on the net, I realized that I am required to buy RIM signing keys, is this true?

  Is it possible to have temporary keys for testing purposes?

  Thank you

  Roberto.

  Signing keys are free and available here

  https://www.BlackBerry.com/SignedKeys/Codesigning.html

• The system could not find the environment that has been entered - option Windows 7

  I don't know what I was doing at the computer before this problem started. However, I first noticed that something was wrong when I tried to open the photo viewer and was faced with the problem of the impossibility to find the module specified for this program. In an attempt to solve this problem, I tried to download and install the Photo Gallery in Windows Live and this is when I first discovered that my system has this problem.

  
  

  I went online to search for solutions to these problems, but none of the solutions worked. Here are the steps that I tried in vain that the system could not find the environment option that was entered.

  
  

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/E272E37C-3C80-409F-8CDF-F3F2242B97D4

  I tried open CMD with administrator privileges but am unable to do so. Once more, the next step on the start-up of the Installation DVD of Win 7 to use the Startup Repair tool doesn't have that the system was unable to find the environment option that was entered. I proceeded to try to use the system restore, but is facing the same problem too.

  
  

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/E272E37C-3C80-409F-8CDF-F3F2242B97D4

  This is the report on my existing variables according to the steps there. But unfortunately, this thread has shown no solution, that I could undertake, given that I can't open Regedit too.

  
  

  
  

  %ALLUSERSPROFILE%

  APPDATA

  ASL.log

  CLASSPATH

  COMPUTERNAME

  ComSpec

  FP_NO_HOST_CHECK

  HOMEDRIVE

  HOMEPATH

  LOCALAPPDATA

  LOGONSERVER

  NUMBER_OF_PROCESSORS

  OPERATING SYSTEM

  Path

  PATHEXT

  PROCESSOR_ARCHITECTURE

  PROCESSOR_IDENTIFIER

  PROCESSOR_LEVEL

  PROCESSOR_REVISION

  ProgramData

  GUEST

  PSModulePath

  PUBLIC

  QTJAVA

  NOMSESSION

  SystemDrive

  SystemRoot

  TEMP

  TMP

  USERDOMAIN

  USERNAME

  USERPROFILE

  WINDIR

  
  
  Can someone help me please? I think to reformat my computer if this continues (think of how to do it now I can't run the Windows 7 Installation disc either).
  
  
  Thank you very much.
  
  
  Nicholas C

  You can probably fix your problem by using the system restore. Here's how it works:
  1. keep tapping F8 during the first phase of startup.
  2. select Repair from the menu.
  3. Enter the administrator password when you are prompted. It is often empty.
  4. When you are prompted, select System Restore.
  5. set Windows to a point before this problem occurred.

• EPMHFM-66054: the system could not find the process of the application ADNIPHFM data source

  Hi all

  When you open the HFM application below the error is thrown.

  EPMHFM-66054: the system could not find the process of the application ADNIPHFM data source

  
  

  Another application is created as Test HFM, is the opening perfectly.
  

  Please help me on this issue, very urgent.

  Thanks in advance

  Concerning

  Satheesh.S

  Thanks to all of you question has been resolved by re set up again for the configuration database and upgrade from previous version.

  Concerning

  Satheesh.S

• Can't delete shortcuts Office - 'could not find this item ".

  I have a few icons (including Acrobat) on the desktop wont Win 7 I would like to remove them - 'could not find this item.

  They are obviously still there and I tried to change the permissions, owvership, etc. all to nothing does not
  If I look at the level of the office via the Explorer Win, that the icons are not actually in the folder
  Where these icons are actually stored and is there a way to remove them

  Hello

  1 did you change on your computer before this problem?

  Follow the suggestions and check if it works very well.

  Method 1

  You can run the fix of the article.

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  Method 2

  Delete the file in safe mode and see if it works.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 3

  If the problem persists, you can run the System File Checker.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 4

  Do us rebuild the cache of Windows 7 icon.
  a. stop Explorer (use for this task manager)
  b. Open command prompt. type cmd in the search box, click with the right button on the cmd.exe in the list and then click "Run as Administrator" and go to: %USERPROFILE%\AppData\Local
  c. view the IconCache.db file with the following command: attrib-h IconCache.db
  d. delete the IconCache.db file: del IconCache.db
  e. launch Explorer (or restart your computer).

   

• Siri don't look for something to do with movies when asked, returns the message "could not find anything for that"

  Siri shows no results for issues related to the films, if requested by the actor, like, years or even simply saying see the me movies the same message comes back "mmm I'm not find anything for that ' any ideas on what could be wrong?

  Welcome to the Apple community.

  Are you sure that you are connected to the iTunes store and if so than that.

• Impossible to connect to the server (could not find library Shell of spring)

  Hi all

  When I run: sqlf > connect the client 'mysqlf:1527'; I get the following error:

  A failed after trying all available servers: [] for control URL: UbuSQLFire01 [1527]. (connection refused)

  A failed after trying all available servers: [UbuSQLFire01 [1527]], to the control host [port]: UbuSQLFire01 [1527]. (connection refused)

  I have done the following tasks:

  (1) I start the positioner with this line:

  Locator sqlf start - dir = index-counterpart-discovery-address = mysqlf-counterpart-discovery-port = 41111 - client-bind-address = mysqlf-client-port = 1527 - J - Dsqlfire.properties =... Locator.Properties

  Locator.Properties has the following sentences:

  License serial number = XXXX-XXXX

  Log-level = config

  statistics-sampling-enabled = true

  statistical sampling frequency = 1000

  (2) I start the server with this line:

  start the server sqlf - dir = server1-client-bind-address = mysqlf-client-port = 1528 - J - Dsqlfire.properties =... Server.Properties

  Server.Properties has the same meaning as locator.propertis more:

  Locators = mysqlf [41111]

  MCAST-port = 0

  and seams to be ok because I get:

  SQLFire Server pid: 1855 status: running

  Distributed system now has 2 members.

  Other members: UbuSQLFire01(1780:locator):63656

  But in server.log, I found this:

  Service order could not be initialized. Library order of spring which is necessary for CLI/gfsh in the classpath that is not found. Internal support for CLI & gfsh is not enabled.

  Any ideas?

  Thank you very much

  Damian

  Hi Damian:

  There could be a configuration problem with your machine's network setting. I see that when you start locator, the address of liaison is mysqlf. However, when you start the server, the message indicates that the host name is UbuSQLFire01. You can use the IP address as the link address, instead of the host name. And see if it works.

  Moreover, the message about spring Libray Shell is not the cause of your problem.

  Jianxia

• I moved a folder of bookmarks in Safari on my desk to alphabetize it but could not move again. Now, Time Machine restores not Safari where I started. Restoration is grayed out and the office keeps - not editor of bookmarks. TM works well.

  I tried to move a subfolder of my bookmarks folder to alphabetize it moving it on my desk. It worked, but I couldn't get back in Safari. So I tried to restore the Time Machine Safari but it brought back my desktop and the button restore is gray. I am running Yosemite on one end of 2013 27-inch Mac. Time machine seems to work ok on other issues.

  You can only restore the entire file of bookmarks to a previous state. It is not possible to restore the individual bookmarks.

  Triple-click anywhere in the line below on this page to select, then copy it to the Clipboard by pressing Control-C key combination:

  ~/Library/Safari

  Quit Safari.

  Select

  Go ▹ go to folder

  in the Finder menu bar. Paste it into the text box that opens by pressing Command + V, then press return.

  Should open a folder window. Restore the file named "Bookmarks.plist" in this folder from a previous backup of the changes unwanted.

  If you don't have such a backup, but the Favorites are still present on an iOS (iPhone, iPad or iPod Touch) device that synchronizes with iCloud, then see below.

  Save your iOS devices. Turn off sync iCloud Safari on all devices except those. Quit Safari and delete the bookmarks on the Mac, and then enable synchronization Safari on it. Launch Safari. Bookmarks synchronization of your iOS device.

• I get this error at the start: could not find capable video game modules

  I need help. After the installation/upgrade to CC PP 2015, I get this error message at startup:

  capable video game modules is not found

  Do you have any suggestions?

  I did everything I can find on this subject.

  1 graphics card automatic switching in System Preferences/Energy Saver unchecked

  2. updated my NVIDIA CUDA software to the version of the driver 7.0.52

  3 trash my preferences Pro first

  All my other apps CC will launch and operate correctly.

  My presentation:

  MacBook Pro (retina, 15 inches, mi 2014)

  Processor: 2.5 GHz Intel Core i7

  Memory: 16 GB

  Graphics card: NVIDIA GeForce GT 750 M 2048 MB

  Hi Mary,

  Thanks for all the information. It indicates that something is inconsistent with your user preferences. Follow these steps:

  • First Pro CC, CC 2014 or 20141 freeze at startup or crashing everything working (Mac OS X 10.9 and later)
  • Run repair permission to drive on the boot under 'Disk Utility' drive and restart the computer

  Thank you

  Regalo

• has had to rebuild the system could not find the service pack 1A winows XP

  Operating system XP Pro computer Crash rebulit must obtain service packs updated.  I Armi 2 requires service pack 1 and service pack 3 requires service pack 1 or 1a.  The Microsoft site http:xpsp1.microsoft,com/isapi/pstream.dll/xp/sp1.usa.1106a does not.  Any help would be appreciated.

  I had a backup but when

  I do a restoration of that my mouse no longer works. and I get to a point where the only option of entry is to move the slider to accept (and then I'm incapable of).

  Windows XP Service Pack 2 - Download (for single PCs too)
  http://www.Microsoft.com/downloads/details.aspx?FamilyID=049c9dbe-3b8e-4F30-8245-9e368d3cdb5a&DisplayLang=en

  Operating systems supported: Tablet PC, Windows XP, Windows XP Home Edition, Windows XP Media Center Edition, Windows XP Professional Edition

  Windows XP Service Pack 3 for developers network installation Package and the professionals (unique facilities for the PC can use the same file)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

  Operating systems supported: Windows XP Home Edition, Windows XP Professional edition, Windows XP Service Pack 1, Windows XP Service Pack 2

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  In order to successfully install the latest Service Pack for Windows XP, follow the steps to check the status of your PC.

  1. Windows XP Service Pack 3 (SP3) cannot apply only on the 32-bit version Windows operation sytem. To check if your system is 32-bit or 64-bit, click on
  2. Windows XP Service Pack 2 (SP2) or Windows XP Service Pack 1a (SP1a) must be preinstalled before you install Windows XP Service Pack 3 (SP3). To check which service pack is currently installed on your computer, click "to check which service pack is installed. To install Windows XP service previous packs, use one of the following options:
     • Click here to download Windows XP Service Pack 2 (SP2)
     • Click here to download Windows XP Service Pack 1a (SP1a)
  3. To install Windows XP Service Pack 3 (SP3)
     • Click here to see the steps to automatically fix
     • Click here to manually download the Service Pack 3.
     • Click here to order Windows XP Service Pack 3 on a CD

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717