G6-2214so: Error Message When you try to use recovery disks

Similar Questions

• Error message when you try to use Toshiba Disc Creator

  I recently upgraded to Vista SP1 SP2 and now I get an error message when I try to use Toshiba Disc Creator 2.0.1.3. "An unexpected error has occurred. Error code 32007C-26-00000001 "it worked perfectly before.

  This is the first time that I used it since the update so I think that SP2 may be part of the problem, but I'm not sure. I could not find updates for TDC. My system is a Satellite L305-S5919 with Vista 32 bit.
  Someone has an idea of what could be the cause of this error?
  Thank you

  Have you tried to roll back the OS in time and checking the previous features once again, just to be sure, it has something to do with the installation of SP2?

  I put t know if anyone here can offer a solution but I m quite pessimistic in this topic and don t think that Toshiba provide new version.
  AFAIK Toshiba disc creator is always available with single and also downloadable image recovery application.

• Receive error messages when you try to use Outlook Express.

  Why can't use outlook express for emailing, I have lot of HAV with google or hotmail

  Sometimes I need to use outlook express, but when I use it says that it cannot send problems

  Hi Graham,

  1. what exactly happens when you try to send mails? You receive messages or error codes?

  2. what anti-virus software is installed on the system?

  Method 1:

  You can read the following article and check if it helps.

  Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express

  Method 2:

  You can also temporarily disable the security software and firewall installed on the system and check if the problem persists.

  Note: Be sure to enable the security software on the computer after checking.

  Hope this information is useful.

• I have an error message when you try to use components

  It seems that I installed the wrong component files or damaged, because everytime I open Flash and you try to use any other component, arrive as "unexpected file format" error messages and Flash closes immediately after this... I reinstalled Fash, but it still shows this error... so I guess that there must be a file where I can delete all of the above installed and to work from scratch... How can I do? Thanks in advance...

  Click on help/manage extensions / click on delete the problem/click component.

• Photosmart HP 6520: HP Photosmart 6520 - error message when you try to use the apps

  I can't access is more apps on my Photosmart HP 6520.  I get the error message "error connection server - 1".

  I don't know if this problem just since I recently changed from a Windows PC on a Mac.

  I very rarely use the apps, so I don't know when it started.

  Everything else seems to work very well I would say.

  Can someone please tell me what could be the cause, or if there is something I can try to sort it out?

  I seem to be going round in circles, and I can't work on what is happening.

  Thanks for your help.

  Hey @TraceyMac,

  Welcome to the Forum from HP Support.  I hope you enjoy your experience here.

  I understand that you are unable to use the pads (Print Apps) on your HP Photosmart 6520 e-all-in-one printer.  I want to help you with this.  A recent installation of printer would not affect your performance of platelets but no loss of connection or wireless Web services could be a factor.

  Note that to access the applications and their use from the front panel of your printer requires two ingredients to be successful: 1) Wi - Fi connection and 2). the ePrint feature (webservices are enabled).

  • Touch the wireless icon () on the front panel of your printer - is the printer connected to your wireless network?  (If not, run the wireless configuration wizard, select your network name/SSID and enter your password wireless reconnect).  If you are connected, proceed as explained below.
  • Tap the icon of webservices/ePrint () on the front panel of your printer.
  • If webservices are not enabled, press OK in order to enable them and allow the automatic updates of printers.
  • This will cause your printer to print an information document describing the characters before @hpeprint.com your printer (ePrint address).  This is known as the claim code.  As another way to use printing applications available for your printer, you can sign in to http://www.hpconnected.com to program applications printing to print and review all the content that ideally will reappear on the front of your printer.
  • From there, you can click the devices tab and use the claimcode to add your printer to the site and take advantage of the available applications, it.

  If these basic steps to respond to a resolution, please, try the following:

  When users encounter this type of problem in general, I suggest from scratch with wireless printer, webservices, and apps printing configuration.  You can clear all of these parameters in a swoop by the factory default restore * your printer.

  Here's how:

  * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom address @hpeprint.com it is permanently erased. For more information about custom addresses ePrint, click here.

  • Front panel of the printer, arrow down and select Tools
  • Select restore default

  Then touch the wireless icon, run the Wireless Setup Wizard to restore your network connection, and then tap the Webservices () and reactivate your webservices.

  If you are able to successfully reactivate your webservices, tap on the icon of your printer wireless () and make a note of the IP address of the printer.  Then, follow these steps to configure a manual DNS:

  • Enter the printer's IP address in a web browser (Chrome, Firefox, Safari, Internet Explorer) and press ENTER to go directly to this page.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.

  No none of the suggestions above restored the functionality you're looking for?  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to say "You rock!" by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• error message when you try to use outlook express 6

  I tried for a less than 2 weeks. to send mails from craigslist & they are not sent. always an error message. Help

  You have two options:

  • Copy the email address in the Outlook Express window that opens when you click the e-mail address, and then paste into a new e-mail message in Windows Live Hotmail
  • Install Windows Live Mail and configure it to access your Hotmail account. Then, whenever you click an e-mail address, it will open Windows Live Mail and send properly!

  If it's something you do often, Windows Live Mail is an excellent choice and will make this process much easier for you. For more information on what is Windows Live Mail and how it relates to Windows Live Hotmail, have a look at the following link: http://windows.microsoft.com/en-US/windows-vista/So-long-Outlook-Express-Introducing-Windows-Live-Mail

  If you are interested in downloading Windows Live Mail, click on the following link to begin:http://download.live.com/wlmail

  If you need help, let me know!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• C:\\Windows\system32\ksproxy.AX error message when you try to use a new webcam with Skype

  I have a new webcam which is recognized by my computer but displays always the followed error message...

  .. If the other is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator for the Publisher of software for support.

  I tried to uninstall and reinstall the webcam and Skype and insured Windows is fully updated. I tried using the disk for the installation of the software and drivers downloadable from the Web site. It's not to do with the firewall with my antiviral product, as I have tested that turn off too. What can I do to get my 'Easy Webcam' SPC230NC Philips to work then?

  Thank you.

  Hello
   
   
  
  1. are you able to use this webcam on other applications?
   
  Method 1.
  I recommend you download and install the PC software and the drivers from the following site.
  http://www.P4C.Philips.com/cgi-bin/dcbint/cpindex.pl?CTN=SPC230NC/27&SLG=en&scy=us&mid=Link_Software
   
  For more information see the articles below:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
   
  For additional help, you can also check with the technical support of Philips.
  http://www.support.Philips.com/support/sms_page.jsp?userCountry=us&userLanguage=en
  
  Method 2.
  If you suspect an activity of virus that I highly recommend to run a Virus Scan online.
   
  Sometimes the security program installed might not be fair enough. I also recommend you update your security software regularly.
   
  a. follow the link below to start the free online scan:
  http://OneCare.live.com/site/en-us/default.htm
   
  b. run the malware removal tool from Microsoft.
  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en
   
  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "Download failed" error message when you try to use the tab create in Expert mode)

  I use PS 11 elements and following a tutorial that instructed me to click on the tab to create, and then select the Photo book in option (in fact, it does not matter which option - they all produce the same error message).

  I get the initial dialogue, to set the number of pages, etc., but when I click on OK, a window opens saying "active download, please wait". This is followed by an error message "failed download. The server is not available or you are not connected to internet"or words to that effect.

  So far I have checked the software for updates, checked my internet connection and looked into this forum to find answers, but so far nothing has worked.

  Anyone else experienced this?

  I think I can solved the problem by renaming a file (which may have had has been corrupted?).

  Here's what I did:

  "I renamed the file" "MediaDatabase.db3" to "OLD MediaDatabase.db3 ' Library\Application Support\Adobe\Photoshop Elements\11.0\Locale\En_US. restart PSE11 folder and clicked on create, using the default value for an object (A place of Sarcelles) and - after a slight pause while the catalog has been rebuilt - it worked! (previously he had not). Tested with other themes and they were all OK too.

  NB: the path of the file above is on an Apple Mac running OS X Lion mountain - he peut vary between versions of Mac OS X and will certainly be different on a Windows PC (see the post of Surendra, above, for a suggestion of where to start).

• Error message when you try to use Windows media Player: the wmploc.d11 file has a version number of 11.0.6002.18111 where 11.0.6001.708 was expected

  My windows media player all of a sudden started giving the message "the file wmploc.d11 has a version number of 11.0.6002.18111 where 11.0.6001.708 was expected.   It started just today and I used it OK so far.    He says then I would go on the site to download the correct version. I click Yes and then try to download windows media player 11 for vista, but it then tells me that this does not apply to my system.  Any help would be appreciated,

  Thanks in advance.

  My windows media player all of a sudden started giving the message "the file wmploc.d11 has a version number of 11.0.6002.18111 where 11.0.6001.708 was expected.   It started just today and I used it OK so far.    He says then I would go on the site to download the correct version. I click Yes and then try to download windows media player 11 for vista, but it then tells me that this does not apply to my system.  Any help would be appreciated,

  Thanks in advance.

  =====================================
  It might be worth a try to do a system restore
  Safe mode for one hour before the beginning of the question:

  Using Windows 7 or Vista System Restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  And/or... Maybe the article would be worth the trip.

  (961047) WMP update after you one
  wmploc.dll on version error
  wrong number
  http://support.Microsoft.com/kb/961047

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I get an error message when you try to use the color picker tool.  What should I do to fix this error?

  

  Hello

  try right clicking the eyedropper on the top left of the screen and click on reset tool

• I have an Airport Express, which gives an unexpected error message when you try to connect to an existing network of WEP.  Any ideas.  Tried the factory returned. He was knocked offline when someone dug into the telco cables.

  I have an Airport Express, which gives an unexpected error message when you try to connect to a router WEP (Verizon) existing iOS9.3.2

  It flashes orange, but can not be reconnected to the router or to the title of the Setup Assistant or Airport utility.  Is there a way to reconnect to WIFI or should I bite the bullet and connect via Cat5e and be done with it.  My VPN works much better without AirPort Express connected.

  Sorry, but there is no WEP settings AirPort Utility on the iPhone or iPad, or any Mac version of AirPort Utility which was used for the last 4 years or so.

  If you have an older Mac still running AirPort 5.x utility or a PC with the AirPort for Windows utility installed on the device, the WEP settings that could be used to get the Express to connect to a WEP network there.

  As you know, WEP has not been secured for a number of years, and there are any number of free utilities available on the Internet, which is crack a WEP network in a few seconds. Thus, all those who want to be on your network will not have problems to do very quickly.

  But it's your call.

• Just recently, I receive the following error message when you try to access the web sites. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. There is a problem with some plugin?

  Just recently, I receive the following error message when you try to access the web sites. I use Firefox browser version 10.0.2. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" as the web site page is displayed in the browser winder. So, I have to click ok. Any link/website I go to what happens. There is a problem with some plugin?

  It is only a problem for the SiteAdvisor users who are still on 3.4. This problem is resolved in the latest version of SiteAdvisor, which is 3.4.1.195. Go to http://siteadvisor.com and click on download. This will fix the problem.

  Meanwhile, SiteAdvisor team will push down a JS update in the coming days 1-2 to automatically resolve this problem in version 3.4.

• Keep gettig this error message when you try to connect to Firefox, the proxy server refuses connections.

  Redownloaded Firefox and keep getting this error message when you try to connect: proxy server refuses connections

           Firefox is configured to use a proxy server that is refusing connections.
  

   Check the proxy settings to make sure that they are correct.
   Contact your network administrator to make sure the proxy server is
     working.
  

  Go to Options > advanced > network > connection > settings, then choose 'no proxy '.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  It is important that you keep updated IE. The information included with your question indicates that you use IE7; you need to update to IE8 for your own protection. IE9 will be available for Windows XP.

  • http://Windows.Microsoft.com/en-us/Internet-Explorer/products/IE/home

• After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help?

  After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)

  It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.

  The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.

• Error message when you try to download files - WINDOWS SECURITY, these files cannot be opened. Your internet security settings prevented one or more files being opened.

  Original title: C:\windows\system32\icacls.exe
  For the last few days I tried to download the different elements as well as download Trend Micro security/antivirus protection.  Whenever I do; try to download something or download something, I get the following error:

  WINDOWS SECURITY, these files cannot be opened.  Your internet security settings prevented one or more files being opened.
  C:\windows\system32\icacls\exe

  I have not found anything within windows security who would do this and when I get this error C:\... it just on my screen flashes, then disappears.

  Any suggestions?  I really need to download Trend Micro.

  Thank you
  Amy

  See the article below:

  ID of the KB Article: 2588679.

  Error message when you try to open some files in Windows 7: "your Internet security settings prevented one or more files being opened." http://support.Microsoft.com/kb/2588679

  Check the following settings:

  Right-click on the downloaded file. Select Properties.
  Click the Unlock button.

  Check the suggestions the following threads:
  http://social.technet.Microsoft.com/forums/en/w7itprosecurity/thread/ab6de772-CE20-4621-88ce-5ae568369826

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/these-files-cant-be-opened-your-Internet-Security/7bbe6bc9-d89f-4407-81fa-ea4c24b39aaf

  Let us know if that helps.