Ved opstart af Windows System 32 sshnas21.dll mangler

Similar Questions

• c:/windows/system 32/dx7vb4.dll

  When I restart my computer say unable to load c:/windows/system 32/dx7vd4.dll

  When I restart my computer say unable to load c:/windows/system 32/dx7vd4.dll

  Please check the spelling of the name of the file that you list. If your spelling is correct, you need to perform a malware scan. I recommend that scan you with Malwarebytes. Download, update and perform a quick scan, choosing to remove whatever it is detected by the analysis.

  Malwarebytes.org

  How to use Malwarebytes

• Receive error message: "C.\windows\system 32\TAPI32.dll" is not designed to run on Windows at startup.

  original title: how to fix "C.\windows\system 32\TAPI32.dll".

  When starting, I get a message saying "C.\windows\system 32\TAPI32.dll is not designed to run on Windows or it contains an error.  Try to install the program by using the original installation media or contact your system administrator or support software provider."  What can I do to fix this?

  Hello

  You did changes to the computer before the show?

  Method 1: Follow these steps and check if that helps.

  Step 1: Try to boot in safe mode and check if the problem persists. Check out the following link to start the computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode then, restart the computer in clean boot in order to check whether a third-party program is causing the problem. To configure your computer to clean boot follow the link

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Method 2: I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link:

  http://support.Microsoft.com/kb/929833

• blue screen error message: < root Windows >-system 32\ hal.dll. missing or damaged

  Problem: Cannot start (not even in safe mode)

  Operating system: Windows XP pro

  PC: DEll 2400

  Error message on blue screen:
  "Windows did not start because the following is missing or damaged:

  ------System 32\ hal.dll.

  I do not reformat the hard drive and lose all my programs and data.

  If anyone can help, I would be extremely grateful.

  Thank you

  HAL811

  Hello

  I have fixed many times by the steps described in this article...

  http://support.Microsoft.com/kb/330184

  This is not guaranteed because the problem can be reduced to hard drive failure rather than just the corruption of the boot.ini file.

  If it does not solve the problem, post back and I will get back on it.

  Tricky

• Whenever I start my computer this display error in c:\windows\system 32\nvmctray.dll entry: nvtaskbrinit

  Whenever I start my computer this box apiers error in c/windows\system 32\nvmctray.dillmissing entry: nvtaskbrinit

  Hello.

  It is what explains what it is. I find a slightly different spelling (you are missing an 'a' in your nvtaskbrinit).

  http://www.bleepingcomputer.com/startups/Rundll32.EXE_...NVMCTRAY.DLL_NvTaskbarInit-3827.html

  See you soon.

• Error in c:\windows\system 32\nvcpl.dll lack of entry: nvstartup

  This appears when I connect my computer.

  Hello

  http://www.ProcessLibrary.com/directory/files/nvcpl/19579/

  c:\windows\system32\nvcpl.dll is a library for NVIDIA graphics card file. No system like c:\windows\system32\nvcpl.dll processes are created from the software you have installed on your system.

  http://www.ProcessLibrary.com/directory/files/nvstartup/25928/

  nvstartup is a process which belongs to NVIDIA based graphics cards on and adds additional functionality for this range of graphics products

  Make sure you have the latest graphics drivers installed from NVIDIA.

  See you soon.

• as my computer starts up I get a message on the screen, error loading C:\Windows\system 32\NvMcTray.dll & the specified module could not be found

  This happened a few months & I can't get rid of it.

  Hello

  Read the answers in the links.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/RUNDLL-error-message-nvmctraydll-the-specified/3633427e-5476-41f8-A414-c2808852b2f3?msgId=684235f7-D922-4CD5-BF94-496f12cb30b0

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/cwindowssystem-32nvmctraydll-error/1c3babd6-a091-4408-bd9a-00cb26c1eeec?msgId=40c06885-3D2D-4913-B734-f3bf810f54a1

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/error-in-cwindowssystem32nvmctraydll-missing-entry/50ab1bad-F05E-E011-8dfc-68b599b31bf5?msgId=4a3ed103-4A64-E011-8dfc-68b599b31bf5

  See you soon.

• Error loading of log on... C:\Windows\System 32\sshnas.dll module could not be found. What does that mean? Where can I find it?

  What does this module do? I didn't notice anything either except monitor problems work inappropriately. Ken

  Hello

  Malware - to ensure that his party - be very full because it is difficult to remove and may be accompanied by others.
  To remove this error message, see the next post below.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  =======================================

  After the above and you are of course his party if you still start up error messages:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• "Error loading C:\WINDOWS|system32\sshnas21.dll".

  This is the message that appears when I start my system "error loading C:\WINDOWS|system32\sshnas21.dll. The specified module could not be found. "What do I do?

  This is the message that appears when I start my system "error loading C:\WINDOWS|system32\sshnas21.dll. The specified module could not be found. "What do I do?

  Looking for errors like this by doing a search on Google for the name of the file.  Usually, they turn up without success.

  When a search in no hits or suspicious hits result, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.

  See http://answers.microsoft.com/en-us/windows/forum/windows_7-files/error-of-sshnas21dll-missing-at-the-startup/c414c2a7-eb5c-4d67-9883-7817fb742d18 (ignore the parts specific to Windows 7)

  Download, install, update and run full scans with two of these free analytical tools:

  MalwareBytes AntiMalware
  SUPERAntiSpyware

  Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

  If the scans does not solve the problem (and they can't, because the actual malware file has already been processed), then download and run Autoruns.  Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."

  Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box.  The latter prevents the line running, but you can reactivate it later by removing the check mark.

• Error performance of load C:/windows/system32/sshnas21.dll DLL.

  I have Windows Vista and, recently, an error box / message on the main screen after signing in. It has a big red X on the left, top left he says Run DLL and in the box: error C:/windows/system32/sshnas21.dll load. He seems to have shown little Mcaffee after install, uninstall, and reinstall a part of their security. I already had the main guarantee, but it is the part of the protection of the family. They could not understand why this program will not open. So obviously, I now this message they say is due to my computer, not them. Help me! How can I fix this message?

  Hello

  Google: sshnas21.dll

  It is Malware

  _______________________________________________

  It's the malicious software that may or may not have been removed or a boot remains for her entry

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, Autoruns for Windows, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• How to fix RunDLL error message: C\window\system32\sshnas21.dll

  When my system I noticed a pop message "load error: C\window\system32\sshnas21.dll" on my screen. Please help me solve this problem. Is it because my system has a virus .please help.

  Hello

  Yes

  It is malware

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If this does not work in normal mode only the above work in SafeMode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and if the problem persists you may need to remove it from the startup procedure

  try this program for that

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Noise - HHCTRL. OCX occupied an address box reserved for Windows system DLLS

  OK so I have a satellite phone and since yesterday, whenever I turn on my laptop, I get this message: -.

  RTHDCPL. EXE - repositioning of unauthorized system DLL
  DLL user32.dll system was moved in memory. The application will not work correctly. The move took place because the DLL C:\WINDOWS\system32\HHCTRL. OCX occupied an address box reserved for Windows system DLLS. The vendor supplying the DLL should be contacted for a new DLL

  So, I sat like 1 million bulletin boards etc. and not got anywhere. I'm normally ok with computers, but this time I confess that I have not the slightest idea what to do. It of really bugging me, can anyone help? Some message boards have taken me to a link on the Microsoft Web site to download something, but it says you must have windows XP service pack 2 and honestly, I have no idea and do not want to download something to totally screw up my laptop! (ok, maybe I'm not very good with computers!) Also, I found a site telling me something to do but I had no idea where to go or anything! I need someone to tell me EXACTLY what to do to get rid of this really annoying message. Also some sites say that when you press 'OK' another message appears, mine isn't it just goes!
  Please help, has soon x

  Please do not post new discussions on the topic that were discussed here in the forum. I always recommend looking before opening the new thread.

  Then please check this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21936

  This problem occurs because Microsoft released a new patch for the closure of a breach of security in Windows Internet Explorer.
  But this patch has a bad influence on the Realtek audio chip.
  That's why Microsoft has released a patch to fix the old fix. ;)

• What laptopi marketing get this time ewery on screen; dll c:window\system\spool\divers\x64\lxcf. missing entry @16

  Hi when I start my laptot get this time on screen, c:window\system\spool\driver\x64\3lxcf time.dll ewry. lack of entry_run dllentry@16 it please can someone tell me what it is regarding

  This DLL (for example, Dynamic Link Library) would have to do with a dynamic timer in your Lexmark printer software. The Lexmark printer software is configured to load each time that you start the computer, so when Windows starts, this error occurs.

  First of all, I would like to see if the Lexmark Support site has an update for your printer software. If no update is available, the original software and reinstall it. Who would recreate the DLL registration and should solve your problems.

• Can someone help me with the error message C:\Program Files\Windows Live Gallery\WLXPhotoviewer.dll the system cannot find message for message number 0 X %1 in the message for %2 file?

  Can you help me? I can't open my Jpeg images in Windows Live Photo gallery. I get this error message;

   C:\Program Files\Windows Live Gallery\WLXPhotoviewer.dll the system cannot find message for message number 0 X %1 in the message for %2 file?
  
  
  I use Vista Home premium 32-bit.
  Cheers, Rob.

  Hi robgrimes

   

  As the issue seems to be specific to Windows Live Photo gallery, you can contact the Windows Live support team. I would recommend posting your query to community specific to Microsoft Windows Live. Please visit the link below to find a community that will provide the support that ask you in the right direction for Windows Live -http://windowslivehelp.com/product.aspx?productid=20

   

  I hope this helps.

• Lack of C:\windows\system32\sshnas21.dll - error message

  I get this error at startup: c:\windows\system32\sshnas21.dll is missing or damaged.  I don't ' think I have a virus, I had run a check using business AVG and nothing was found last week.  I am running again this am.  Last night I ran a registry cleaner free trying to fix my Outlook email in question and said the vacuum we found thousands of entries I did not buy the software so that it ran and cleaned only a few entries. He was ParetoLogic pc health advisor. This morning my sidebar does not work.   My OS is Vista.  I did a search on the problem of dll, it responds to me told to delete all occurrences of sshnas21 of regedit.  I opened Regedit it registered 'My computer' with 4 or 5 entries under it.  I went to edit/search/trying to find a sshnas but everything came right I wasn't sure if I should delete all or what the devil at this point.  My email still will not let me click on links within an email or a word document... my side bar does not, now, I have a msg of error at startup... Help would be greatly appreciated.

  I found the answer in another forum... http://en.kioskea.NET/forum/affich-286191-error-loading-c-Windows-System32-sshnas21-DL Thank you commentcamarche! the fixed perfectly.