Game DVD worldwide on a Satellite M70

Similar Questions

• Cannot burn DVD - R with my Satellite M70

  Hello
  I have a Toshiba Satellite M70-169 laptop which has the function
  DVD - R burning. However, when I insert a blank DVD - R, I have a
  message: drive inaccessible incorrect function.

  I think that just a fault of the computer notebook, or something else?
  Thank you.

  Hello

  Burning application you are using? Have you tried just preinstalled Sonic or same Nero?

  Generally avoid any problem. Please test with different applications, as well as with the different media (TDK, Verbatim, etc.).

• Problem with Mat * a DVD - RAM UJ - 841S Satellite M70-165

  Hello

  I have a Satellite M70-165 equipped of a DVD unit MAST * a DVD-RAM UJ - 841S (5.1.2535.0 driver version).
  After years of 1 and a half with no problems, a few days ago, I restore the operating system (Windows XP Home) through the Toshiba restart DVD.

  Then the CD/DVD unit can read the DVD-audio, CD, or movie, but when I open a DVD (DVD software) data it is said that "it is not possible to access the D:\". ». and some time "poblem whith I/O device. and the same problem that I have with some new cd (which were not burn)
  I have'nt try every thing. I come here to ask the question.

  Sorry for my bad English

  THX

  You can do the following: go to download drivers of Toshiba Europe site and check if there is an update of firmware for this specific player. If so, I strongly recommend you apply and check if it works.

  If the didn t of the firmware update worked later you assumed that the reader is defective and must be replaced.

  Welcome them

• Where can I get a DVD of recovery for Satellite M70?

  Hello

  My friend has a M70 396 and has no recovery disk and can't seem to windows or recovery console.

  I tried to him order the CD from the link of media recovery on this site but it is said that they do not have the disks for 2007 models or earlier.

  I have a DVD of my own M50, which is a bit older, but has the o/s-I guess that it wouldn't work?

  If not, where can I get one from? He got one in the box or he lost so I don't know what to do except buy a Windows CD and do it from scratch but prefer to perform the Toshiba recovery if possible.

  Any help much appreciated!

  CJ

  I can imagine authorized in your country service provider has one in archive and can give you for the installation of the OS. If this isn't the case, it is not the end of the world.
  For the installation of the OS you can use the Microsoft WXP installation disc. All the necessary drivers, tools and utilities that you can download at Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads.

  Good luck.

• DVD - RAM on Satellite M70 cannot read all CD

  Hello..

  I have satellite M70-215, and I have a problem with the DVD - RAM drive... it's my dvd - ram does not correctly read the CDs... some of them can be read and some of them may not... when I put a CD that leans on another computer, I was 'incorrect function', ' device can not available "errors... or I see an audio CD instead of data cd... but on the other side, some of my CDs work wihtout problems... I did everything (remove driver and install again etc.) to solve the problem but I could not find the answer... This is my second toshiba laptop and now I have the same problem again... What's wrong with this DVD - RAM drive? I hope you can help me because I got bored with that...

  thnx now...

  Ali Mert Türkkan
  Med.Dent.

  The problem could be the driver lens calibration.
  Before the player will read or write to the media of the lens must be calibrated in the right position, but if the drive has been used long-term these problems appear

  Sometimes the lens cleaning helps, but especially the disk needs to be replaced

• Satellite M70-181 to perform the recovery of proceeds of DVD USB drive

  Hello

  I am trying to recreate the image on my Satellite M70 181 using the product recovery DVD.
  Should be easy, you might say, but the internal DVD player no longer works.
  I don't want to buy a new laptop this quite old, so I borrowed an external USB drive.

  After that I inserted the product recovery DVD the notebook starts from there, autoexec creates a RAMDRIVE and copy the files from there.
  "Recover.bat", the external DVD player analysis must be accessible via the X: drive. However, there are has some missing files on the DVD to mount the external DVD drive: there is no file % RAMDRV%\TOOLS\USB20. DEV, nor a file % RAMDRV%\TOOLS\USB11. DEV.
  Failure of the attempt to mount the external hard drive, recover.bat starts a loop saying 'Please insert Recovery CD #1!'.

  What can I do now? Help, please.

  Thanks in advance

  ULi

  Hello

  As much I know this model of laptop can't boot from USB CD/DVD drive and CD recovery.
  You can boot from the USB FDD drive and a bootable floppy drive but I doubt that this is not possible with a Toshiba restore disk.

  I think that you could use this recovery disk as part of internal ODD.

• Re: Satellite M70-148 - new compatible DVD player

  I have a Satellite M70-148 and the DVD writer is dead some time ago, I'm looking to replace it now but I'm stuck. After looking a bit on Amazon, I found these:
  http://www.Amazon.de/GP/product/B0052JJ44C/ref=ox_sc_act_title_3?ie=UTF8&m=AX7W93QYFVSA2
  http://www.Amazon.de/GP/product/B0052JJ2P8/ref=ox_sc_act_title_4?ie=UTF8&m=AX7W93QYFVSA2

  Is the 2 only I could find on Amazon, I asked the seller as well, but I prefer to know for sure, anyone know if either will fit in a M70 148? All this looks like but what about the connector etc...

  Thanks for any help!

  Hey,.

  What vendor you asked?
  If it were an authorized service provider, you can be sure that the readers, they mentioned will not work properly and I would like to buy only one disk recommended by a service provider authorized because different readers have different pinouts, etc. to 100%, so not all readers are compatible.

  I can t tell if Amazon readers are compatible or not, but if you ask an authorized service provider can give you an exact answer ;)

• Satellite M70-131: A .cda file is shown on CD or DVD

  Hello

  I have Satellite M70-131 - my DVD drive is not working file, when I insert a CD or DVD is to show the CD Audio CD!
  When I opened the CD I will find a file with this extension .cda!

  Whats happening guys? :(

  Hello

  Please visit this page on the CDA file extension!
  http://www.coolutils.com/formats/CDA

  Also, I found this info:
  + A. shortcut of CDA file is a small file generated by Microsoft Windows for each track on an audio CD. The file contains indexing information and are named in the format TRACK #. CDA. The files do not contain any audio and are basically useless when a CD is ripped to a hard disk or converted to MP3 and written as files on a CD. Some software brings up files contain audio as recorded material begins when a. CDA file is clicked on, but it's just the operating system and no music in the. CDA file. +

  So, if the Windows operating system is unable to open the files with the extension. You do not have install appropriate CDA program

• Satellite M70: Can't access the CD drive during the use of CDs & DVDs blank

  My satellite M70 gives me the following message is displayed when I insert the blank disc for recording.
  D:\ is not accessible
  Incorrect function

  I am however able to access the drive to view already recorded CDs and DVDs. I used similar CD and DVD for burning purposes earlier. What could be the reason?

  Hello

  According to the Microsoft Knowledge base document this problem may occur if the registration of CD from Roxio Easy CD Creator program is installed on the computer, and the version of the CD recording program is not compatible with Windows XP.

  Please check this document how to solve:
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 315350

• DVD of Satellite M70 of burning low speed

  Hello world

  I bought my laptop a few months there, it's a Satellite M70 which has a stack * a UJ - 841S of speed which registration should be around 8 x, but I can't check greater than 1.2 X on DVD and 8 X on CD, it takes me 40 minutes to record a DVD, can someone help me?

  Is there an update for this?

  Thanks in advance

  Hi Diogo

  The DVD writer is not the only factor that determines how fast the media must be written. I'm sure you know it depends on media itself and burning software too.

  Have you tried to use DVD media to check the burn speed? I recommend you to use well known as TDK DVD producers. I use it for a long time with different burners and until now never had no problem and the speed of combustion was always declared on DVDs.

• Satellite M70-165: unit of CD/DVD can't read data DVDs - "not possible access to D:.

  Hello world

  I have a Satellite M70-165 equipped of a DVD unit MAST * a DVD-RAM UJ - 841S (5.1.2535.0 driver version).
  After years of 1 and a half with no problems, a few days ago, I restore the operating system (Windows XP Home) through the Toshiba restart DVD.

  Since then, the CD/DVD unit can read DVD audio, CD, or movies, but when I open a DVD (DVD software) data it is said that "it is not possible to access to the D:\." and something like "does not correct" (I use an Italian version of Win XP so I have to
  translate the messages in English).

  All drivrs are regularly installed and there should, in theory, work very well.

  I am a user of entry level, and I don't really know what to do. I attended every single forum on the issue for the past few days, but nobody does
  could help me.

  I would be extremely grateful if someone could help.

  Thanks in advance!

  Hello

  This error message has been documented on the site of Microsoft Knowledge:

  [Error message when you access the CD or DVD drive after upgrade you to Windows XP: 'Incorrect function' | http://support.microsoft.com/default.aspx?scid=kb;] EN-US; 315350]

  The documentation says that this problem can occur if the registration of CD from Roxio Easy CD Creator program is installed on the computer, and if the version of the CD burning program is not compatible with Windows XP.

  Please take a look at this Forum thread too:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24203&MessageID=88868

  A user has solved this suppression of some video capture software that had a DVD DIY option.
  These programs may change the whole registry values and causes these annoying problems.

  Please check if you have installed these programs

• How can I make the DVD drive Mat * une Région UJ - 841S (Satellite M70) free?

  Hello
  I spent hours and hours trying to remove my car DVD DVD regional code Mat * a UJ - 841 S on Toshiba Satellite M70-204.
  I checked on various forums and asked a lot of people in the stores...
  Nobody gave me a hint to this topic...
  Can you please help?
  I often watch DVDs from various regions for my course!

  Hello

  The same topic a few days ago http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=10828&messageID=38935#38935

  Check it!

• Re: Satellite M70-339 DVD movie disks but not recognize Virgin DVD or CD?

  Hello

  My Toshiba Satellite M70-339 recognizes the DVD movie but not blank blank DVD or CD discs.
  It happened some time ago and I'm ever round to sorting. INE day that only, it has stopped working.

  I have since reformatted all the computer several times, but it has never begun work again.
  I can watch a movie, a DVD OK, but when I try to burn anything to a DVD or CD, it don't think that there is a disc in the machine to engrave on Virgin.

  I tried the software built into Windows XP, burning CD and it does not work, nor does any third-party CD or DVD burning software.

  Just to reiterate, I want to be able to burn the files to CD/DVD again.
  Can someone advise?
  Thank you

  Windows XP Service Pack 3
  1.70 GHz Pentium
  1.99 GB Ram (upgraded self)
  Carpet * a DVD-RAM UJ - 841S internal DVD Multi Recorder

  Hello

  Check this box:
  Remove the drive CD/DVD from the list of Device Manager.
  Go to the registry and remove the filters above and below the following key:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Restart the unit.

  By the way; I also recommend trying different disks, CDs and DVDs from different manufacturers. Discs R TDK is a good brand and good qulaity I use this and I m satisfied

• Transfer of the old videos on DVD with Satellite M70

  Is it possible to connect a VCR to a Satellite M70 in order to transfer the recordings on video tape to DVD? If this is the case, should what cable I?

  Hello

  Since your laptop is only equipped with a TV OUTPUT, you cannot just plug a VCR on your machine, because to do this you will need a video in.
  The only chance you have is to buy an external video acquisition for PCMCIA or USB card.
  With these you´re of video capture card capable of receiving video signals outside and check/change their.

  Here´s a link that shows you an example of what I mean:

  http://www.beststuff.co.UK/hama_usb2_video_grabber.htm

  Hope that will help you.
  Welcome them

• Satellite M70 - drop drastic FPS game while

  My laptop is a Toshiba Satellite M70-148.
  Link: [see here | http://nl.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=NL&BV_UseBVCook = Yes & PRODUCT_ID = 109803 ie]

  I bought my laptop in febuari 2006. I played Army v2.5 the game in America since then.
  For 4-5 months I get drops FPS serious all-in game. I want to talk about 85 FPS (on an ongoing basis with the highest settings) to the more frequently falls to 30-40 FPS and even more 10/08/15 FPS (on the smaller bare parameters).

  At first I thought that this could be fixed by increasing the RAM memory, so I bought 2 sticks of 1 GB of RAM. And it did not work at all.
  I installed a new backup, with nothing else but Windows XP (Home, legal good course with all updates) and the game and I always feel the drops in FPS.

  What seems to me to hear is the fan blowing stronger when I get the FPS drop and sometimes it does the same thing when he goes back to 85 fps.

  Because he has been able to run smoothly before that I'm inclined to think that there is a hardware malfunction which causes this problem.

  Is there a way I can replace/upgrade material inside my computer?
  Or can someone give me a suggestion as to where I should look to find the problem?

  Thank you very much!

  PAMF

  If you think you have a hardware problem with your laptop, I'd go to a Toshiba service partner.

  You can search for a partner in your area on this site:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  I hope this helps you...

  Best regards

  Maurice