GANYMEDE conf for interface web aironet 1100

Similar Questions

• I have remove the IOS of the aironet 1100 series by mistake and now I need to copy the IOS image file

  Hello

  I have a cisco aironet 1100 Series wireless access point.

  by mistake I delete the IOS of the router and now I need to copy the IOS image again on it.

  I need your help please.

  For now, he has the Ethernet led RED, Green State, Rdio RED. T no Cisco IOS image file the spirits).

  I downloaded the file c100-k9w7 - mx.123 - 8.jed

  and I download the tftp (tftpd32) servers

  I have the router connected directly to a pc with the static ip address of 10.0.0.2

  but the problem is actually that I don't need the 1100 router ip address right now, I can't access it through a web browser.

  and by a tftpd32 I try but no function.

  I don't know what I'm doing wrong.

  other things, it's that I did not find a clear manual on how to use a tftpd32 to transfer the file to the cisco router 1100 series.

  Thank you.

  I'll wait your hepls.

  Convert a standalone Lightweight Access Point
  http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html#wp161272

• Cannot create a shortcut on the desktop for a Web site in the browser Firefox Tor

  I am a user of Tor Browser, and I love the interface of Firefox. According to my page, my Firefox browser is up-to-date. But for some reason I can't save shortcuts to office for a Web site. Whenever I drag the icon beside a Web site (variously a glob, a green bolt and other icons), I get a mouse icon of denial no matter where I try to put the web shortcut on the desktop. This happens even when I drag the bookmarks of my bookmark bar! My guess is that something is blocked in Tor allowing no shortcuts settings. Any suggestions on where the parameters of the shortcuts are in Firefox?

  Fred, all other modules worked well. I contacted the people of Tor, and they were unsure of what's going on. I've pasted their response below, but the short answer is that they have me just save shortcuts manually from the office whenever the Tor Button is active. Thanks for your help, you've been great!

  4.1 proxy obedience of
  https://www.torproject.org/projects/torbrowser/design/

  Point 3 of the quote:
  < < < < Begin quote > > > >
  Drag events filtering and blocking the external application

  External applications can be induced to load files that perform network
  activity. Unfortunately, there are cases where these applications can be launched
  automatically with little or no user intervention. To avoid this,
  Torbutton installs a component to provide the user with a popup when
  the browser is trying to launch a helper application.

  In addition, modern desktop computers now preemptively look for all URLS in drag
  and events move as soon as the drag is initiated. This download happens
  independently Tor browser setting and can be triggered by
  something as simple as holding the mouse button for a little too
  time by clicking a link to the image. Filter us drag and drop events
  events of Torbutton before the OS downloads the URL contained events.
  < < < < < snippet > > > > >

• Aironet 1100/1200 series and Windows

  Is it possible to use the Windows IAS Radius with Aironet 1100/1200 Series light? If yes are there problems you may need to pay attention to?

  Respectfully

  You can use the server Radius IAS for LWAPP. I'm not aware of any questions.

  Someone else can add to this.

  -> Sushil

• Aironet 1100

  I have problems connecting an Aironet 1100. I was able to connect to the Web to do a software update on it. Now, I am unable to connect to access now. I have flashing LED AIRONET 1100. The lights flash in GREEN ORANGE RED.

  Hello

  Check the following link and based on the indicator signals you can understand what the problem is.

  -> Sushil

• Data control for the Web Service based filter table adf only appear not

  I have a SOAP web service I'm consumption as a web service data control.

  When I use one of the results of the web service through data to the web service in the form of a table control in the user interface with the filter and sort, I don't see the filters on the top of the table.

  It comes to JDeveloper version 11.1.1.7.

  Please let me know if anyone has an idea on this issue.

  TIA

  ABS

  You need connect your own logic on the filtering table.

  The table doesn't actually do the filter - it does, is the data control to filter the info - for a Web service we do not know how it will actually make a sort-, so you'll need to add a filterListener on the table and call a WS that will be returned the filtered data method.

• CSR SSL Cert for remote Web Workplace

  Customer shall execute a certificate SSL for Remote Web Workplace and asked me for the Certificate Signing Request (CSR) information for the domain. I searched help and knowledge that they can't run their own SSL and now you're wondering how to move forward?

  T Hey I need to use Remote Web Workplace, which runs on a sub domain

  Looking for an answer on how my client can use their position of remote Web Workplace and have their site hosted on BC?

  Remote Web Workplace is a feature of Microsoft Windows Small Business Server and Windows Home Server 2011 medium-sized product company, Windows Essential Business Server, that allows existing users to log into a network front face of the small Server Edition-Professional family interface-based.
  
  After logging in to Remote Web Workplace (using their Windows domain user name and password used), a user can access enabled features of the Small Business Server or Essential Business Server, such as Outlook Web App, the viewing of SharePoint pages and (if a machine is running and allows him to) full remote control of client computers connected to the network to the server.

  Off-site access
  Remote Web Workplace is a feature of Windows Small Business Server, Windows Home Server 2011 and Windows Essential Business Server that allows access to users to facilities when they are offsite such as email, reading/modifying shared calendars and remote controlling a machine as if they are sitting in front of IT.
  
  Connection options
  When you connect to Remote Web Workplace, users can choose their connection speed which then optimizes the characteristics of the connection. The options are: Small Business Network (Intranet), broadband, modem of 56 Kbps and 28 Kbps Modem.
  
  Means of access
  The Remote Web Workplace is a Web application and is accessed through a web browser. To control remote computers, a user is required to install a "ActiveX desktop remote control" in its web browser once and only Internet Explorer is supported.

  
  

  Please and thank you!

  Short answer (to date) you can not SSL certs on BC... so you can't generate CSR

• Could not load the interface Web VMware Server 2

  Hello

  It seems that there have been a number of users has a problem similar to mine. Unfortunately so far it seems not be an easy fix. A few weeks ago, I downloaded VMware Server 2.0.2 and installed on my Ubuntu 8.04 Server. Surprisingly, it worked very well and I set up a virtual machine via the web interface. It took 3 weeks later I started having problems. Or, when I tried to access the web interface through the browser page just came not upward or it came I have connected, but then was then put on the door.

  Initially, I have done the following but doesn't seem to help.

  -Reboot the system

  -Restart all vmware services

  -Delete all cookies and cache.

  Then I thought that this question had to do with the process of webaccess. It seems that the process was not because for a very short period of time, the connection appeared and I was able to connect. But after a short period of time, it displays an error and then the connection was unreachable again.

  I checked the port 8308 below:

  netstat - LNP | grep: 8308

  TCP 0 0 0.0.0.0:8308 0.0.0.0: * LISTEN 5754/webAccess

  Here is the response from audit ipv6:

  netstat - LNP | grep tcp6

  ping6-c1 localhost

  Unknown host

  I disabled it by changing of ipv6 on off in the etc/modprobe.d/aliases.

  My hosts file resembles the following:

  127.0.0.1 localhost

  127.0.1.1 web web.cinci.rr.com

  The following lines are desirable for the hosts with IPv6 support

  : 1 localhost ip6 ip6-loopback

  FE00::0 ip6-localnet

  FF00::0 ip6-mcastprefix

  FF02::1 ip6-allnodes

  FF02::2 ip6-allrouters

  FF02::3 ip6-allhosts

  I have attached the file proxy.log. I saw a few exceptions so don't know if this has to do with the problem.

  Also, I've included the hostd.log (it's in a zip archive because there are a few files of newspapers spend). I have

  Finally, I checked all the active internet connections and sockets. The results are below:

  Connections Internet active (only servers)

  Name of Proto Recv-Q Send-Q address foreign address State PID/program Local

  TCP 0 0 127.0.0.1:8005 0.0.0.0: * LISTEN 6910/webAccess

  TCP 0 0 0.0.0.0:902 0.0.0.0: * LISTEN 6888/vmware-authdla

  TCP 0 0 0.0.0.0:8009 0.0.0.0: * LISTEN 6910/webAccess

  TCP 0 0 0.0.0.0:8333 0.0.0.0: * LISTEN 6994/vmware-pass

  TCP 0 0 0.0.0.0:80 0.0.0.0: * LISTEN 4917/apache2

  TCP 0 0 127.0.0.1:8307 0.0.0.0: * LISTEN 6994/vmware-pass

  TCP 0 0 0.0.0.0:8308 0.0.0.0: * LISTEN 6910/webAccess

  TCP 0 0 0.0.0.0:23 0.0.0.0: * LISTEN 4421/sshd

  TCP 0 0 0.0.0.0:443 0.0.0.0: * LISTEN 4917/apache2

  TCP 0 0 0.0.0.0:8222 0.0.0.0: * LISTEN 6994/vmware-pass

  UDP 0 0 0.0.0.0:68 0.0.0.0: * 4393/dhclient3

  brute 0 0 0.0.0.0:1 0.0.0.0: * 7 6634/vmnet-natd(8)

  UNIX domain sockets active (only servers)

  Proto RefCnt flags Type State I-node PID/name path of the program

  UNIX 2 BDRM STREAM LISTEN 16158 6994/vmware-pass/var/run/vmware/root_0/1267514173386057_6994/ha-nfc-fd

  UNIX 2 BDRM STREAM LISTEN 16165 6994/vmware-pass/var/run/vmware/root_0/1267514173386057_6994/ha-nfcssl-fd

  UNIX 2 BDRM STREAM LISTEN 16167 6994/vmware-pass/var/run/vmware/proxy-Web server

  UNIX 2 BDRM STREAM LISTEN 16189 6994/vmware-pass/var/run/vmware/root_0/1267514173386057_6994/hostd-vmdb-fd

  UNIX 2 BDRM STREAM LISTEN 16191 6994/vmware-pass/var/run/vmware/proxy-mob

  UNIX 2 BDRM STREAM LISTEN 15714 6634/vmnet-natd(8) /var/run/vmnat.6634

  UNIX 2 BDRM STREAM LISTEN 11895 4940/python /var/run/fail2ban/fail2ban.sock

  Finally, just to try to "start over". I removed VMware Server system and reinstalled. Since the virtual machine is in a separate Directory I thought I had nothing to lose. Removal and resettlement seem to succeed. After a reboot and an attempt to access the interface web it STILL didn't work. I'm really at a loss right now. Any help would be much appreciated.

  Thank you

  Aaron

  Hello

  Welcome to

  Don't forget to give my answer. It is the way to give users of vmware communities who helps others.

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog

• How to access the interface web web services test

  I'm running my server 10.3 in test mode. How can I access the web test for my web service interface?
  I can see the wsdl, but I can't access the test interface as in previous versions.
  
  Thank you

  Click in the table of your Web Service deployment.

  Scroll down to the section modules and components. Here, you should see a tree that contains Web Services.

  Click your web service

  Click on the test tab

  Open the tree and here, you should see the link to test client.

  If you have the location of the WSDL file, you can also add: http://adminserverhostname:7001 / wls_utc /? wsdlUrl = forward, for example,

  http://adminserverhostname:7001/wls_utc/?wsdlUrl=http://serverhostname:port/CompanyWebService/CompanyService?WSDL
  

  in what http://serverhostname:port/CompanyWebService/CompanyService? WSDL is the location of the WSDL file

• I would use Yuanti SC police for my web development project. However, my developer is not able to use the file .ttc I extracted from the library of fonts, and .ttf, .otf .woff formats not available anywhere on the web.

  I would use Yuanti SC police for my web development project. However, my developer is not able to use the file .ttc I extracted from the library of fonts, and .ttf, .otf .woff formats not available anywhere on the web. Please, let me know how can I use this font for my project.

  Thank you

  Anton

  Unless the site you develop is for the Asian market, I don't know why you want to use that particular font. The Basic, standard and digital alphabet punctuation glyphs has sans serif, Roman characters, but the rest is thousands of Kanji characters. While you can use the font .ttf and .otf and web fonts, it would be very unusual to use one so great. Pages should load quickly and 78 MB, with a value of faces to download for those who have connections slow Internet is not fast.

  I would take a different font without serifs. There are literally thousands who look identical or virtually identical to Yuanti.

  131 free and high quality without font serif to choose here. I'm sure you can find a desired.

• How to delete user names registered for a Web site if it does not have an associated password?

  I accidentally typed in part of a password when you enter a user name for a Web site.
  How can I delete this registered user name? I tried to delete cookies from the Web site, but it does not work. I tried looking through saved passwords, but it doesn't work either, since there is no actual password associated with the username.

  Was probably saved as a data form - see this:
  https://support.Mozilla.org/en-us/KB/control-Firefox-automatically-fills-in-forms#w_clearing-form-history

• Can we suggest Firefox for our Web site and use your logo as a button for your download section?

  We would suggest Fire Fox for our Web site we use your logo for the download button to link to your download section of your site?
  Thank you
  Milton

  I do not know there would be no problem - it is after all advocacy.

  Logos and trademarks of rules are here

• How to create (or delete) a new tag for a Web site, so that his tag appears (or does not appear) whenever I restart Firefox?

  How to create (or delete) a new tag for a Web site, so that his tag appears (or does not appear) whenever I restart Firefox?

  See this - https://support.mozilla.org/en-US/kb/How%20to%20set%20the%20home%20page

• No Web hosting, but what about the media space for a Web site?

  My understanding is that iCloud doesn't support web hosting, in the sense that I can't use iCloud for a Web page.

  However, can I use my iCloud space to contain the media accessible by the URL?  For example, I'm currently an MP3 file that I can hear some people.  Can I store in a part of my iCloud space and send a URL to where they are stored in iCloud?  Even if there is no relevant web pages?

  Not at the moment.

• Hello how do I configure Firefox 8.0 so that he asks me if I want to save a password for a Web site. At the present time I don't get not an option whenever I go into a site I know is safe, I have to enter user name and password. I've been good tools etc.

  Hello how do I configure Firefox 8.0 so that he asks me if I want to save a password for a Web site. At the present time I don't get not an option whenever I go into a site I know is safe, I have to enter user name and password. I've been good tools etc.

  Thank you, any help would be help full like whenever I connect to Face Book for example I have to provide all the information and it's a pain

  Soon Alex

  See:

  • https://support.Mozilla.com/en-us/KB/make-Firefox-remember-usernames-and-passwords#w_make-Firefox-remember-usernames-and-passwords