CSR SSL Cert for remote Web Workplace

Similar Questions

• Remote Web Workplace - VBScript: Remote Desktop disconnected

  Using Small Business Server 2003 (SBS 2003 SP1 Premium).  The Remote Web Workplace Remote Desktop connection has worked for years.  We apply Microsoft Updates to the server last week and since that time, we get a message telling VBScript: Remote Desktop Disconnected - the client could not connect to the remote computer.

  We have verified that no other changes were made in the environment since the last time that this feature was working.  We looked on the web and on the Microsoft site, and none of the usual causes of this question seems to apply.  Other features SBS seems to operate normally.

  We are looking for additional troubleshooting steps, we can take.

  Thank you.

  Hello JohnM781,

  Thank you for your message.  Please submit your question to experts in the Small Business Server forum in TechNet.

  See you soon

• Remote Web Workplace 2011 connected to the remote PC lot

  I have a client who is having a strange question about Remote Web Workplace 2011.

  It will connect to RWW that herself as usual, but when it connects to the remote computer, I'll call him PC1, it connects to a different machine (PC2).

  I have logged on to the SBS server and made sure his remote PCs are configured correctly, she only has permissions for remote access to PC1, all other PCs have been disabled for the remote access.

  There were no changes made to the names of PC or anything.

  The server is a Windows Small Business Server 2011 Standard.

  If I have excluded any information please let me know! Any help/ideas would be greatly appreciated!

  Thank you

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Remote Web Workplace and remote printing

  At home, I have a laptop Win7 and a new printer HP Officejet Pro 8620.  I use Remote Web Workplace to connect to my Win7 desktop at the office (both are 64-bit).  I installed printer drivers 8620 on the desktop PC.

  I connected to the desktop through RWW.  The desktop PC sees my 8620 home printer and says "redirect".  I print a test page and open the printer to "see what is printing", I see the print queue, then print, then went in the window as if it is done.  But she is never actually prints.  My home printer doesn't even look like he gets no data from RWW.

  I already had a HP Officejet printer model connected successfully.  And, more recently, used a Lexmark Pro915.  I need to replace the Lexmark.

  After trying the 8620 without success, I reconnected it the Lexmark and it works fine.

  Help, please!

  Hello

  Please contact Microsoft Community.

  That your problem is limited to print remotely using the printer HP Officejet Pro 8620. I suggest you post your query in the TechNet forums to get help.

  Check out the TechNet Forums:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Please contact us if you need additional help with your windows, we will be happy to help you.

  Thank you.

• Setting the SSL certificate for the web user interface

  How can I configure the SSL certificate for the management of a SG300 interface? I don't seem to find the configuration option in the web gui?

  Hello Dirk,.

  For import / create / modify h99350 ssl please go to ' ' security > SSL server > SSL server authentication settings.

  HTTPS is enabled by default.

  Thank you and best regards,

  Siva

• Problem connecting Remote web workplace Win 8

  I upgraded to Win 8 on my PC at home. Now, I can't connet to the win 7 PC to work. I get to the screen where I choose the PC to connect to and then nothing happens. I can connect without problems to my Win 7 computer laptop. Help, please. Thanx. David.

  I have it exactly the same problem.  When I arrived at the point of "Connect to my computer at work" I just get a blank page.  I use a laptop computer brand new Windows 8.  Our old Windows 7 based laptop works without any problem.

  In this old configuration, I had to activate ActiveX controls to operate at the beginning... I checked these same setting are in place on the new machine of Windows 8 and they are.

  PS - the two links you provided do not work.

• Abstract WSDL for the remote Web (outside of the SOA platform) service?

  Hello

  I use a remote Web service which is based WSDL. I noticed in our development environment that when the server restarts if remote WSDL endpoint is not available, my composite goes into invalid state, even if the actual WSDL file is located in the project.

  I use MDS to another inter composite dependencies, but this service is outside of the SOA platform, so how can I create an abstract WSDL and use it via MDS to avoid invalid state?

  Currently I have the WSDL of localized real distance and a wrapper WSDL generated external Web service framework.

  Thank you.

  Hello

  If the wsdl file has been copied to the project, it shouldn't go invalid, check if there are imports in the wsdl file that may be pointing to remote, as sites of patterns... You will need to locate those as well...

  See you soon,.

  Vlad

• View issue 5 Client SSL cert.

  So, now with 5 Client view, it's tighter security with default certificates.  I see that there is a way around this, but I'd rather the default setting.  Here's my situation:

  I have my 2 servers load balanced with one DNS name connection and the SSL certificate is reflecting this name.  However, I have some remote VPN users who do not have access to our DNS and they use the IP directly to connect.  In addition, in certain circumstances, we can have a user connect with one of the server names or direct IP address.  So, we have a potential of 6 different ways to connect.  The only way it seems to work with the customer if they do not use the name of DNS load balancing is if put us it to "unsecured".  It's not ideal because should ask each user to change this setting.

  Yes, is there a way to have multiple SSL certificates for each connection method and how do you do that?  If not, is it possible to change the customer to install with "Not safe" by default instead of warn?

  Thank you very much!

  Scott.

  Yes, certificates are difficult to get your head! I must return to my whenever detailed notes, I revisit the. So maybe it's too much detail from the beginning, but if all goes well, it gets out you a bind.

  1. create the keystore of the display server certificate

  -Add C:\Program View\Server\jre\bin VMware to the PATH

  -To the cmd prompt run "c:\program VMware view\server\sslgateway\conf" cd

  - keytool - genkey - keyalg "RSA" - keystore keystorefilename.p12 - stores pkcs12-validity days

  -Provide and confirm a password for the key file when prompted (this will settle in clear text later by the way)

  -You get will then invite your first name and last name. Use the servername.domainname. Answering other questions if you wish.

  - Type Yes to confirm

  2. create the CSR request

  - keytool - certreq - keyalg 'RSA' - csrfilename.csr - pkcs12 keystore - keystorefilename.p12 of the file stores

  -Use the password of the keystore creation

  3 apply for the CSR to the CA Windows

  -Open IE and go to the page of application for certificate cases

  -Advanced certificate request

  -Apply for a certificate

  -Copy and paste the contents of the csrfilename.csr file

  -Model cert: Web

  D ' other attributes san: dns =bla& dns =blah.domainname& dns =ip (must have already editflag command run on CA server for it to wor in accordance with my last post)

  -Save the file c:\program view\server\sslgateway\conf VMware Base64chain p7b

  4 chain of certificates of import in keystore

  - keytool-import - keystore keystorefilename.p12 - stores pkcs12 - keyalg 'RSA' - trustcacerts- base64chain.p7b of files

  - At the command prompt, type Yes

  You must then change/create the text file 'locked.properties' in c:\program view\server\sslgateway\conf from VMware that contains 2 lines:

  keyfile =keystorefilename.p12

  KeyPass =keystorepass

  5 reset (VM says that restart web services view VM should do, but I didn't this work but it might for you)

• SE sec_error_inadequate_cert_type with private SSL Cert

  Howdy,

  I run a certification authority private for personal use and only to learn more about SSL Certs. However, with the current version of FireFox I'm on (31) I can no longer visit the sites that I secured with SSL Certs that are signed by this CA, although these SSL certificates work perfectly fine in Chrome and Internet Explorer. I get an error "sec_error_inadequate_cert_type." I can't assume that the certs that I delivered are bad in some way, but the error is imprecise and the error page does not specify more.

  Only, I discovered this when I realized some of my SSL certificates had expired, and I went to their reissue.

  From the certificates that has not yet expired, but problems can be found here:

  • https://forums.silicateillusion.org

  One of the Certs I tried reissue, assorted fields included as closely as possible to a Google SSL cert I looked up is here:

  • https://phpMyAdmin.endofevolution.com

  These certificates have been generated using the application called SimpleAuthority, found here: http://simpleauthority.com/

  A Site like Networking4All.com seems to believe that certificates are valid, with the exception of the certification authority which is Self signed: http://www.networking4all.com/en/support/tools/site+check/report/?fqdn=phpmyadmin.endofevolution.com & = https protocol

  Curiously, using another site like SSLShopper me an error similar to FF31: http://www.sslshopper.com/ssl-checker.html#hostname=https://phpmyadmin.endofevolution.com

  Certificates are currently running on an Apache Web server: Apache/2.2.21 (Win32) mod_ssl/2.2.21 OpenSSL/1.0.0e PHP/5.3.10

  The CA Cert is in store for FireFox as being approved.

  If needed, I can provide certs.

  I discovered the problem: the CA certificate that I was using had extended consumption.

  See Bug: 1049176

  I confirmed this by generating a new CA test with the excluded the use extended field, then generate a new certificate of SSL certificate checks correctly now.

  While I'm relieved, I realized what the problem is, being so vague with the error message that makes me lean towards another browser for primary use. The fact it took me 4 days and a very large amount of work to understand why this was happening is unacceptable, because the error description was generic and included no sets out the steps so never.

• Remote Web access is disabled

  I asked for the ssl certificate I want to host field to my server in the window, but when I try to access the IP in the browser, it displays the error that access remote Web is on official assistance on how I can host and remove this error!...

  I use Windows server 2012

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• vRops SSL Certs

  Hello

  So, Ive recently rolled out an 8 node vRops enviromnemt and finally had the time to ask the authority of internal certification signed SSL Certs, I created them, convert their PEM format, downloaded 1 cert, had look ok, then did the 2nd node, verified and it looked ok, I then checked the node 1, who pointed out a mistake and said there the same SSL certificate as the crux of the 2nd.

  Now I need to check that documentation does not seem to say that and not see anything on the web it is clear either.

  VROps is the SSL certificate of the same SSL certifiate for each node for an enviromnemt?

  If so what I need to create a single SSL certificate and a subjectAltName for each node intot he asks cert.

  which means that I have put an article like this in my openssl.cnf

  [v3_req]

  subjectAltName = @alt_names

  [alt_names]

  DNS.1 = vropsnode1.internal.domain

  DNS.2 = vropsnode2.internal.domain

  DNS.3 = vropsnode3.internal.domain

  DNS.4 = vropsnode4.internal.domain

  DNS.5 = vropsnode5.internal.domain

  DNS.6 = vropsnode6.internal.domain

  DNS.7 = vropsnode7.internal.domain

  DNS.8 = vropsnode8.internal.domain

  IP.1 = 192.168.1.1

  IP.2 = 192.168.1.2

  IP.3 = 192.168.1.3

  IP.4 = 192.168.1.4

  IP.5 = 192.168.1.5

  IP.6 = 192.168.1.6

  IP.7 = 192.168.1.7

  IP.8 = 192.168.1.8

  see you soon

  John

  The documentation is really poor in this area. but I got this VMware"one certificate will be used by the web server on all nodes, so to do the certificate must be valid for all nodes.  One way to get there is with multiple subject Alternative Name (SAN) entries".  So looks like im on the right track.

  Which is kind of weird, but works as that said, when you look at the certs ssl free signed that they have different names vc-ops-slice-1, vc-ops-slice-2 etc. but then you download an SSL certificate cert of the same is on all nodes.

  Update: Ive had an SSL certificate generated with the subjectAltName as in the example above with the full domain name and IPs for each node in the cluster and created the imported and appropriate to this PEM file, it works and the certificate is valid on all the nodes, this is the solution.

  Also of the impact, that is the question that vRops Government itself to vCenter with the IP address and not FQDN, the SSL certificate needs the IP address, but in my case it causes also connectivity issues in browsers because of our proxy settings, so it must be considered if his need...

  • vRealize extension of Operations Manager is saved using the IP address instead of the DNS name
    By default, vRealize Operations Manager saves its extension with vCenter using the IP address of Operations Manager and not the DNS name vRealize. Users who click on open vRealize Operations Manager tab monitor vCenter open a URL based on the Operations Manager IP address vRealize and not the DNS name.
    Workaround: To allow the registration of the name vRealize Operations Manager with the DNS name extension, follow these steps:
    1. On each node of the cluster of Operations Manager vRealize, follow these steps:
       1. Starting the console, open the following file in a text editor.
          $ALIVE_BASE/user/conf/configuration.properties
       2. Add the following line to the properties.
          extensionUseDNS = true
          Note: You can go back to using the IP address by changing the property to false.
       3. Save and close configuration.properties.
    2. Connect to the Operations Manager vRealize management interface and restart the cluster.

  John

• SSL Cert automation tool

  Hello

  I wanted to vSphere update 5.1 to 5.5 and had problems with the standard certificates. So I decided to stop and first to replace now. We will generate certificates by our internal CA and spread with the SSL Cert automation tool.

  Read a few KBs I have two questions before you start.

  1. may I do the modification of certificates in production period or do I have to put something in maintenance mode and so I have to do this weekend?

  2. While the tool is running, I'm able to choose what services I want to update. When I choose "8" all services are selected. It doesn't matter if do not have all of them running. For example, we do not have the Orchestrator, but I don't know if we Log Browser.

  Thanks in advance

  Wolfgang

  Hi Wolfgang,.

  (1) you will need downtime that services are restarted a couple of times, also don't forget to close all dependent solutions (VMs should not affect but that managing the components are affected).

  (2) log browser is embedded in the Web Client, so if you have that installed you also Log browser

• HPDM: HPDM replace self signed SSL certificates for server HDPM and master repository

  I am trying to replace the automatically generated self-signed certificates (issued to DM) issued by DM server HDPM and master repository.  I'm NOT arbitration FTPS, HTTPS embedded HPDM or CERT Thin Client Agent server.

  I already have CERT for the installation of our own internal domain CA for FTPS in IIS and the built-in Apache HTTPS server.  These work properly and pass tests of repository for both protocols.  I also have questions for Thin Clients of our internal CA very well.

  I am interested in the HPDM real server cert and cert master repository. These are generated automatically when the two services start.  They use a very weak MD5 hash and key RSA 1024.  I can't find any documentation around that, with the exception of troubleshooting, in which you can remove these certificates restart services and they will be regenerated.

  Here are the paths certs\key
  HPDM % install Path%\MasterRepositoryController\Controller.crt (Cert repository)

  HPDM % install Path%\MasterRepositoryController\Controller.key (repository key)

  HPDM % install Path%\MasterRepositoryController\Client.crt (HPDM Server Cert)

  HPDM % install Path%\Server\Bin\hpdmskey.keystore (Both HPDM server and repository Certs and keys) (not sure what format it is in.  It is not PEM and P12 ok I can say)

  There are also some HPDM % install Path%\Server\bin\hpdmcert.key.  Don't know what it is.  It's the key to the server HPDM but deleting it does nothing and it is never re auto generated in one of my tests.

  I am able to replace the Controller.crt and keys with my own files CA internal those emitted very well.  The service started and no errors occur.  However if I replace the Client.cert (HPDM Server Cert) with my own service will start but there are Socket SSL errors in repository logs and the HPDM server could not connect to the master repository. I have no idea where the key file is supposed to be for HPDM Server Cert.

  Can anyone help with this?  I can't find the configuration files for the service to generate their own certificates.  If I did I would try at least to change the config to do not use MD5.

  Hello

  These certiricates between HPDM server and MRC are not designed for customizable. Please submite one scenario if you have concerns of security on it.

  Just for info:

  hpdmcert. Key is for communication between the server HPDM and gateway HPDM

  hpdmskey.keystore is for communication between the server HPDM and MRC

  server_keystore is for the commhucation between HPDM server and the Console HPDM

• Remote web panel Embedded Software Evaluation Kit LV8.6

  Hello

  I recently bought the evaluation of embedded software package that comes with the trial version of FPGA, RT LV8.6 90 days... and even though I have sucessfully worked through the tutorial, with the kit I came across a problem when you try to run a remote web site, Panel as it list loading 0% but never proceeded beyond this point.

  After fishing trawl through many discussion forums, I came across a post that gave one of the reasons for this as being due to having a later version of LabVIEW run time engine installed on the PC - only by removing LabVIEW 2011 could I get the web to run Panel.

  My question is how to manage several versions of LabVIEW if I wish (and) to install multiple versions of LabVIEW and still be able to run a command remotely through LV8.6?

  See you soon,.

  Helen

  Hi Helen,

  With LabVIEW development versions, you can disable (using the License Manager OR), but given that the engines of execution are not allowed you can not disable that.

  You could try one of your LabVIEW versions running on a virtual machine, what separates them from the other.

  I apologize for the problem you are having, I appreciate that it disadvantages you somewhat, but I assure you that your team of R & D to address the issue.

  Kind regards

• Possible security for the Web-based Configuration

  My colleagues and I found something very interesting today... Despite having configured the FTP security settings (which have been confirmed to set up and in funcitoning. I can't open an FTP session to our remote target without specifying a username admin and the password) If you open the configuration tool based OR web in a browser, you can send via FTP to and from the target using the file remote browser without being connected to all! Everyone knows this?

  Apparently, these permissions are separate from FTP, but you can define these special permissions on the page of the security configuration for the web-based configuration utility.