Pavilion elite m9255uk: damaged wiring antenna Office

Similar Questions

• Pavilion Elite HPE-170 t - Wi - Fi adapter with antenna?

  I would like to connect to a desktop Pavilion Elite to a local network. The router is a Linksys EA3500 (802.11n technology). The distance between the router and the wireless adapter on the desktop will be about 30 feet with walls between the two.

  The office doesn't have an outdoor antenna. When I checked for network adapters, I found this: Realtek RTL8168 / 811D Family PCI - E Gigabit Ethernet NIC (NDIS 6.20).

  I use the computer for HD, movies, not for games. Should I buy a Wi - Fi adapter? And if so, which one of these adapters Linksys would give me better performance?

  1. a USB adapter - http://bit.ly/1tg8Cj1

  2. a card PCI adapter with antenna - http://bit.ly/1pzVpSt

  3. a USB adapter with antenna - http://bit.ly/1taGZd2

  Thank you

  Brescia

  Record office:

  Product name: BN496AV-ABA-HPE-170 t

  Product number: BN496AV #ABA

  Operating system: Windows 7 Ultimate 64-bit

  Hello:

  I have the AE3000 on two of my HP business offices.

  It has good reception and never had a problem with either of the units.

  I have a 2-story house with a finished basement.

  My Linksys EA 4500 router is on the second floor.

  One of my desltop of PC's in the basement.  The AE3000 on it, you get 4 bars of reception on the 5 GHz band and 5 bars on the 2.4 GHz band.

  Connection speed is 324 Mbit/s (out of 450) on my PC of basement on the 5 GHz band.

  Connection speed is 216.5 Mbps on bandwidth 2.4 GHz because I have this band the blended value that allows (wireless B and G) to connect legacy devices.

  It works fine on W7 x 64 and x 64 W8.1 (using the drivers W7 on the CD).

  It also comes with a 3' USB cable attached to a docking station so that you can position the camera somewhere for better reception.

• Office Pavilion Elite e9220y: name of the Internet access when you hover over said tskbr network 5. is that HP name or co cable. ?

  Hello

  I have a desktop Pavilion Elite e9220y Home Premium; Win 7; 64-bit computer.

  I'm wired; but have wireless for other things (Kindle, etc..)

  When I open internet access in the bar of tasks and under the "wireless network connection", I see MY connection (and the name I gave my connection) and 5 solid green bars (no problem).

  Above this section, there is an article with a picture of a House (provided by HP, I'm sure), and he says:

  ' Currently logged on:

  and just below it says: (to the right of the photo of the House) network 5

  and just below it says: internet access

  That's all it lists the wireless network connection with my name and the names of other connections in the district.

  My question:

  the name "network 5"?

  HP says it is my cable provider; my cable provider says it's at HP.

  This can be changed?

  Thank you!

  Hello Denise,.

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I understand that you have a problem with wireless networks.

  Windows will think it's in a new network whenever it detects a new router. If you have changed your router or the router configuration. Windows creates a new network. But do not worry.

  If you don't want the name of the connection to be listed under active connection, follow the steps.

  (1) open the "Control Panel".

  (2) select and open "network and sharing Center."

  (3) click on the ' icon "(une icône de la maison pour moi) less 'show your active networks'.". " This will open the dialogue "set network properties." Here, you can rename a network connection or a change as the network connection icon.

  4) click on "Merge or delete network locations" to view the list of network connections that are stored. You can merge or remove connections

  Let me know if it helps.

  Have a great day!

• I replace my motherboard ane9220yl pavilion Elite. I am looking for a wiring diagram

  I replace my motherboard for HP pavilion Elite e9220yl. I need a wiring diagram to help me make sure I am rewiring correctly.

  I would try a different monitor first cable, and then another monitor. The monitors are very old technology. You have a LCD screen to test with the new configuration? If those don't work, then test the memory modules and try installing a video card, in that order.

• Pavilion Elite m9428f PC Wireless Connection

  I have a Pavilion Elite m9428f desktop PC.  It is connected by cable/wire to a router that is connected to a modem to cable box.  I bought a HP all-in-one computer and want to move my desktop computer in another room in my house, but to be able to continue to access the internet.  My desktop computer can be connected wireless to my router (Linksys), which is compatible with the wireless?  If so can you recommend where I can find instructions on how to set up.

  In addition, I read that my office has an antenna wireless inside the tower.  In addition, the original hard disk supplied with the computer crashed a year ago.  I have more files/programs of HP who were on the hard drive.

  Any information is appreciated. My knowledge in this process is limited, so if there is a way to do this in an explanation "for Dummies", it would be useful.

  Thank you for your time,

  Tom

  Hi, Tom:

  According to the specifications of product for your PC, it should be ready completely wireless.

  Look in the Device Manager. You should see 2 NICs listed. One wired and one wireless.

  http://support.HP.com/us-en/document/c01570955

  Paul

• Find where on the HP site card for my HP Pavilion elite model e92002?

  I am trying to determine if my office has wireless capability. Pavilion elite e92002, product # AWZ017av

  There is no HP model # e92002 and no HP product # AWZ017av... However, if you mean model # e9200z and # AW017AV then the plug can be found HERE. The problem is that the HP Pavilion Elite e9200z desktop PC is a CTO model (configured to order) and specifications only a range of options that you may have ordered. The system comes with an integrated Realtek ethernet wired 10/100/1000. You need to select one of these other networking options:

  None

  56K bps data fax/modem (external USB modem)

  56K bps data fax/modem (external USB modem) & Wireless LAN 802. 11 b/g/n and external antenna

  LAN 802.11 b/g/n wireless with internal antenna (low profile)

  802.11 b/g/n PCI Express x 1 wireless card external antenna

  802.11 b/g/n PCI Express x 1 wireless card & integrated Bluetooth module USB wireless for PC

  Please check your purchase order or look in the Windows Device Manager to determine if your system has an installed wireless card.

• Desktop HP Pavilion Elite 150ff: performed a cover of the factory, now I get the error HP photo creations DC18

  I did a factory recovery using Recovery Manager on my desktop of windows 7 Home premium, Pavilion Elite 150ff. After having installed all the updates and download flash player and Adobe Reader and install my Antivirus HP Photo creations program won't work, I get an error message saying DC18, and Microsoft claims it is incomatible, I have the icon on my desktop. Tried to download it from the HP website, but my anti virus detected a trojen, how can I get this program working again. All other programs work fine, my desktop is wired but my 7520e printer is wireless and connected properly. Also HP smart web printing does not work, using IE11.

  Hi Emma.

  Uninstall and reinstall HP Photo Creations should resolve the error. Here are the instructions step by step for Windows:

  1. check your Internet connection

  • If you have access to the Internet from a company or a network of offices, please make sure that the network or the firewall allows access to the HP Photo Creations software.
  • Check your computer clock to make sure the date and time are set correctly.

  2 uninstall and reinstall HP Photo Creations

  Step 1: Uninstall HP Photo Creations

  1. Click Start
  2. Click on Control Panel
  3. Click Add or remove programs
  4. In the list, select and delete HP Photo Creations

  Step 2: Download and reinstall HP Photo Creations

  1. Go to https://shop2.rocketlifeproduction.com/hpfe6fd34b208847e8f8254b9be96e8c4c/catalog.html?gta=download
  2. Click on the download button. Depending on your browser, you can choose to run or save the program. Choose run if they are available. (If you choose Save instead, double-click the file you downloaded).
  3. Follow the instructions on the screen to reinstall HP Photo Creations.

  Step 3: Open HP Photo Creations  

  Open HP Photo Creations by double-clicking the shortcut on the desktop, and then confirm that it works.

  I restart the computer after step 3 may help as well.

  -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

  Our support team is always happy to help you. You can contact them at www.hp.com/go/supportform

  Thank you for using HP Photo Creations,
  
  RocketLife

• HP Pavilion Elite HPE - 480t computer and burner blu - ray 12 x HP bd 340i

  Model bd340i in the middle of last year, I bought HP 12 x Blu - Ray burner. When I bought my HP Office in December 2010 model HP Pavilion Elite HPE - 480 t, I installed the burner and everything worked very well. Today, I tried to burn a blu - ray disc, and he returned with can't read media, which stood on imgBurn. So I tried the same thing on the burner systems, and she came back as no drive in the status bar. I have also tried burning CyberLink software and the same thing no disc.

  I then tried to play the two store bought and home made blu - ray disc and could not read media. I was ready to blame it on a bad burner but then I tried a regular DVD the two store bought and done House, and it plays very well. I then tried to burn a single dvd double layer with all the burning software three I have and it is still fine, no problem. It's just the blu - ray media that cannot be read or written. The only supports blu - ray, I used from the first day was Kodak and never had a problem. That's what baffles me.

  At this point, I don't know if it's a hardware or software problem with the computer or burner blu - ray or both. 3 different burning programs works fine on DVD but not blu - ray, DVD plays fine but can't play or burn blu - ray discs.

  Could this laser blu - ray crapped out and the dvd reading and writing laser still works?  Must a blu ray burner still lasers for both media (DVD and Blu Ray)?

  Everything else with the computer works fine. I even tried uninstalling and reinstalling and it is the same, I tried to update the drivers and firmware on your site and still does not work. Please help.

  When did you purchase your product? : December2010
  Product HP Pavilion Elite HPE - 480t CTO desktop PC
  Select a problem area: other
  What is your serial number (SN): [personal information deleted]
  What is your operating system? : Microsoft Windows 7 Home Premium 64
  Your computer is unable to work with Accessories products? Please select all the boxes. other
  What type and brand of CD/DVD media you are using? Kodak 25gig of Bu-Ray and dvd HP
  The CD/DVD writer burner was built in the computer when you bought it? NO.
  You hear the sound from the speakers connected?
  The display on the product seems to work correctly? Yes
  Have you connected the product to your TV, DVD player or a music system? NO.

  If there is an error message, please specify: cannot read media
  Description of the problem: I bought burner HP 12 Blu - Ray model bd340i in the middle of last year. When I bought my HP Office in December 2010 model HP pavilion Elite HPE - 480 t, I installed the burner and everything worked very well. Today, I tried to burn a blu - ray disc, and he returned with can't read media, which stood on imgBurn. So I tried the same thing on the burner systems, and she came back as no drive in the status bar. I have also tried burning CyberLink software and the same thing no disc. I then tried to play the two store bought and home made blu - ray disc and could not read media. I was ready to blame it on a bad burner but then I tried a regular DVD the two store bought and done House, and it plays very well. I then tried to burn a single dvd double layer with all the burning software three I have and it is still fine, no problem. It's just the blu - ray media that cannot be read or written. The only supports blu - ray, I used from the first day was Kodak and never had a problem. That's what baffles me.
  Please provide previous steps of troubleshooting, or information that can help HP help you. : I don't know at this point if it's a hardware or software problem with the computer or burner blu - ray or both. 3 different burning programs works fine on the DVD but not blu - ray, DVD plays very well, but can not play blu - ray.
  Nothing changed since the device was working properly (installation of SW, settings, wiring, etc.): everything with the computer works fine. I even tried uninstalling and reinstalling and it is the same, I tried to update the drivers and firmware on your site and still does not work. Please help.
  How would you describe your level of technical skill? : intermediate
  First name Peter
  Name, first name rider
  [Personal information]

  Arcticwolf, sorry, I miss read your post details. That strangely resembles a failed drive. Try unistalling and reinstalling the drive, including the software and driver. If a problem has occurred, it may fix.

• A usb 3.0 card can be upgraded to the HP Pavilion Elite e9150t CTO desktop computer?

  I have a HP Pavilion Elite e9150t CTO Office, which has been upgraded to Win7 64-bit.  Could I move to the newer and faster usb 3.0 by purchasing and installing a card with usb ports?

  Hello

  Based on the following specifications, it has a few free PCIe connectors:

  http://support.HP.com/us-en/document/c01792852

  You can add a card PCIe USB 3.0 on your computer such as:

  http://www.eBay.com.au/BHP/USB-3-0-PCI-e-card

  Kind regards.

• HP Pavilion Elite HPE-500f desktop PC

  HP Pavilion Elite HPE-500f desktop PC - I would like to upgrade food, video card and hard drive. Can I use a SATA III hard drive? Can I use a 4 Gig ATI video card? Those are the weak links in this computer in the measurement of performance, Windows 5.1 index. The ram has already been updated to 16G. I would use a hard drive WD Black edition.

  Thank you!

  Jon A. Schoen

  [email protected]

  You can use a SATA-III HDD but the 785G chipset only supports SATA-II. You won't see any difference, and the SATA-III is backward compatible. You have a 300W power supply. You can put in a better and with a minimum 500 or 600 watt PSU, you can install any videocard, pcie 16 x which will be in good physical shape. In retail offices, there is simply not as much space as in a custom build Tower and best video cards these days are huge things two locations. Don't forget, it fits with room to spare, or you will have problems of air circulation.

• How to access the BIOS on a Pavilion Elite e9237c with mouse and keyboard wireless?

  I have a desktop computer Pavilion Elite e9237 with a wireless keyboard and mouse. I tried to access the BIOS by pressing F10 at startup with no luck, and I can't access any of the other menus for the start-up eiither. I don't have a PS/2 port on my computer, so I can't get a wired keyboard and mouse. Does anyone know how to access the BIOS with this configuration?

  I bought a USB keyboard and he answered in the same way... No bios access. I then studied why it did not work and discovered that it was the way in which he has been connected to the computer. I had initially plugged into a USB hub when he was not working and I moved it directly into a USB port and it works! I plugged my keyboard wireless directly into the USB port and it works too! Thanks for your help... I wouldn't have thought of it if it wasn't for to recommend you the USB keyboard.

• HP Pavilion Elite HPE - 532 s: 'Secure Boot Configuration' not found?

  Hello support, I wanted to disable startup secure for my office.
  I have a pavilion Elite HPE - 532 s Bios 7.15 I followed the step of many posts, but I don't have it under the heading "security"?
  I am on window 10 64-bit UEFI.
  I wanted to disable, because I have a new GTX 960 graphics card and it stuck on the HP logo at startup all the time when I use the new card. !!

  I tried to disable the security slot, but no matter what I do I get a black screen for my card both old and new so I have to reset the bios settings.
  Help me please.

  Thanks for the additional information.

  Here is my diagnosis/notice:

  I don't think you'll be able to get the GTX 960 to work with this system.

  Why it won't work in the UEFI/GPT:

  It will not work in the UEFI [I think] 960 GTX is one card of UEFI and you must disable secure boot to make it work. Your BIOS is only "UEFI compatible" originally planned for Windows 7 [which does not support secure boot]. If you are unable to disable the secure startup, you can not use this card.

  Why it won't work in legacy/MBR:

  It won't work in legacy because it's a single card of UEFI.

  My suggestion:

  Return to the legacy/MBR and use a graphics card that has a dual BIOS BIOS/hybrid or one who supports in particular the Legacy BIOS as described in one of my previous posts.

  Some other things to consider:

  You PSU has enough power for this card? I think it takes a minimum of 400W PSU.

  You connect the auxiliary power connector?

  Have you tried to disable "Intergrated Graphics" in the BIOS [as appropriate]

• Pavilion Elite PHE 450 t PC: intermittent Desktop closed, noise from the video card fan.

  My office has developed a problem in which she stops 10-15 minutes after a cold start.

  I have a Pavilion Elite HPE 450 t running Windows 7 64.  I tried dusting and open the box, but it keeps happenings.

  In addition, my video card, an NVIDIA GeForce315 G 1 fan makes noise.

  I have 2 questions:

  1 ¿is this fan an item repairable, or I have to replace all?

  Can 2 how I check the power supply to see if it is not part of the problem?

  Is there there tensions I can measure to see if its OK?

  My query related to food, is that I run a couple of terabyte drives out of the office, and I wonder if I'm loading down the power.

  I would appreciate comments, suggestions, etc.  Thanks in advance.  Thank you folk being here to help that old man.

  Leon R.

  Greetings,

  It seems to be a possible thermal problem with the graphics card fan.

  The fan on the graphics card work? Remove the side panel to check. Yes, you can remove the side panel while the system is turned on.

  Do not touch internal components. Just inspect.

  The Geforce 315 is a riser. I've never replaced graphics card fans, but I guess it's possible.

  A power failure is always a possibility.

  Eliminate food, the more reliable is to temporarily connect a good diet known to the system.

  The system was stable before the thermal emission of fan noise and possible? That should remove a power supply problem.

  You can replace the graphics card. Your PC has many options that were available for purchase.

  Please see here. Select "Options of material", then scroll down to 'Graphics '.

  See you soon!

• HP Pavilion Elite HPE-270e cannot update the bios

  HP Pavilion Elite HPE-270e desktop PC

  Microsoft Windows 7 (64-bit)

  I have a problem running the sp49903.exe that contains the last update of the bios for my pc. My antivirus is disabled, no other programs are running, I am logged in as administrator and also tried to run as administrator, but that I always meet the same problem. It runs and I click Next and then I agree with the terms of the license agreement and then click Next and then I get an error message: (the contents of this file cannot be unpacked. The executable file that you are trying to run has been damaged. If please get another copy of the file, verify its integrity and try again.)

  My latest version of bios is 5.28 and I'm trying to update to 5.29.

  HP Pavilion Elite HPE - 270e Desktop PC product specifications

  Software downloads & Driver - HP Pavilion Elite HPE-270e desktop PC

  you try to download a new copy of it?

  I did and it worked.

  try to download and try to install on another PC and see if the error is the same. It will not install on another PC, it checks to see what the BIOS is the first. But the error you report no has nothing to do with the BIOS, it tells me the downloaded file is corrupt and since I just tried to download and install and it worked, it tells me the file on the server is good.

  Good luck

  Bill

• HP Pavilion Elite m9402f: Information on compatible SSD for the old desktop PC

  PC desktop, HP Pavilion Elite m9402f

  How will I know what Solid State Drives are compatible with my computer?

  A 850 EVO 256 gb SSD Samsung works with my motherboard?

  Thank you!

  Tim

  Hello @TimT1,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I stumbled upon your post on the SSD question and wanted to help!

  Based on Product Specifications of your office, your motherboard supports the hard following:

  • 640 GB SATA 3 G (3.0 Gb/s)