Gateways and telepresence SX Gatekepers

Similar Questions

• ip WLAN configuration - missing option to set the gateway and proxy...?

  Hello!

  I need to put the default gateway and the ip proxy addresses after you connect to an access point with wpa2.

  For example my htc incredible may do very well in the installation behind wifi opions.

  I think that he whould do a good idea to config for gateway, dns and proxy server server ip config wlan just after ssid-choosing the Tablet I remember 4 the next connection... a bit like the login made 4 me.

  Could sb here please give me a hint how to solve my problem of connection up there?

  I really like the A1 ThinkPad Tablet after using it 4 about 10 days now... 4 I can fully recommend the purchase and improve my gadget favorite... :-)

  (mod edit: changed the title of the post to match the wire because the question is about the thinkpad rather than the A1 ideapad Tablet Tablet)

  Under settings to go wireless and networks

  under Wi - Fi networks

  Press and hold the connection that you want to change

  Select 'change network '.

  Scroll profile

  Change the automatic to manual Proxy settings

  Enter your settings

  In this place you can also change your DHCP server static IP address

• CameraWindow, Image Gateway and travel

  I have one new PowerShot SX60. I've implemented CameraWindow and can easily view the photos from the camera on my smartphone. When I WifFi, I can also upload them to Canon Image Gateway. We leave for the Viet Nam in a few weeks, and I was wondering how to use these snazzy features to publish photos on Facebook or attach them to e-mail on a trip. While we are abroad, I don't want to spend too much bother time with technical details, so I hope to have a good method under control before leave us. Put pressure on travelers from the world out there with advice about how to get the most out of these features in situations where the available WiFi can only be a cybercafe or hotel? Is it possible to bypass Image Gateway and go directly from the phone to Google Drive? How about you, attach one image in an e-mail or a Facebook message? I'm looking for an efficient workflow to use in situations where the time and access are limited. Any advice much appreciated!

  You don't mention what smartphone you use, so my experience will rely on Canon G7X and window installed on an iPhone camera 6.

  For me - and I have not yet traveled with the combination, just around NYC - would be to use the camera app window to copy the photos you want to send (FB, Message, E-mail) on the phone itself. (In the case of an iPhone's Camera Roll or all Photos/Moments if you hired iCloud Beta of Photo I) Once the photos on your phone you can use either the FB app (sometimes I prefer the paper version), or your e-mail or any account that you used to send Messages to send photos.

  Now - although I've set up an account of the gateway of the Image, I him have not used yet. I guess the 'advantage' of that would be that your photos are stored in the cloud of Canon. The way I suggested above - especially if you don't use icloud Apple Beta Photo - pictures remain on your phone. Not the best solution for photo backup unless it's a pretty short trip. Unless you plan to import all your photos to Google Drive, but I guess they have a dedicated application and would not need the Image gateway to do.

• http connection goes through the WAP gateway and not through BIS/BES

  How can I check that an http application connection passes by the WAP gateway and no BIS/BES.

  I do not have the source code of the application and need to build my own app to connect http connection made by the unit.

  I only have the jad file.

  Thank you very much for the help.

  at this point the man, you must understand a few things on your own.  Get the cod, and put the cod in the same folder as the Simulator, they will then work in the sim card.  Or you can browse to a deployment for application with the sim ota and download the cod in this way.

• Video-conference using SX 20 and telepresence ISDn device link

  Hello

  I have a cisco SX 20 and device connection isdn telepresence device. the procedure via below I have configured and coupled unit SX and telepresence

  Step: 1

  address configured static Ip add via remote control.

  Step: 2

  using static ip, I have connection to the SX 20 device, using the browser. (ip 10.1.1.2)

  Step: 3

  Configuration--> devices--> manage ISDN link--> click--> click combined with research

  Step 4

  In ISDN configuration of the link--> I have ISDN numbers entered the repertoire. Subsequently, it works fine.

  Problem:

  End of test, cancel us the twinning of the device and restart the SX 20. Subsequently, we are unable to pair the device of telepresence.

  While click Display message (No. DEVICES DETECTED) the search button.

  Please share the solution on an urgent basis.

  Thanks in advance.

  Rgds

  Vetri

  Did restart the ISDN link solves your problem?

• PCoIP Gateway and IPv6

  We use PCoIP gateway and remote users to log in from home using Microsoft Access live. This works on IPv6 so that the PSG IPv4 address is translated by an IPv6 address. But this means that the external URL parameter on the login server can be set up an IPv6 address. Someone at - it it works or if it is not supported?

  The "URL external PCoIP ' set to view Security Server 4.6 is used by customers to view to connect to the Security server. Like all Teradici PCoIP clients require the destination address is an IPv4 address, this ' URL external PCoIP ' can specify an IPv4 address. This requirement is validated by the view.

  Select this option.

• Best practices to configure NLB for Secure Gateway and Web access

  Hi team,

  I'm vworksapce the facility and looking for guidance on best practices on NLB with webaccess and secure gateway. My hosted environment is Hyper-v 2012R2

  My first request is it must be configure NLB, firstly that the role of set up or vice versa.

  do we not have any document of best practice to configure NLB with 2 node web access server.

  Hello

  This video series has been created for 7.5 and 2008r2 but must still be valid for what you are doing today:

  https://support.software.Dell.com/vWorkspace/KB/87780

  Thank you, Andrew.

• work around the internal security gateway and the same url for web access external and internal

  role of the broker 1 quest
  1 security with the roles of web access gateway
  1 Server terminal server

  I configured the default gateway with the parameter security rule: "vworkspace security gateway".
  I created a custom with the 172.16.1.177 value rule (it's my client internal windows7).
  When I navigate to the internal url (fqdn's secure gateway server) I bypassed (tsdebug shows no sslgateway).

  But now I want to use 1 internal and external URL to type the same URL.
  Now when I navigate to an external URL of the machine internal with above ip I always get through security gateway, I see a SSLGateway

  Hi Erik,

  I think that this has been fixed in our latest version 8.5 - documents.software.dell.com/DOC252107

  Please download and upgrade your farm and let us know if you still see this problem.

  If you do, it may be best to save a service request so that we can see exactly what is happening.

  Thanks, Sam

• Collaboration and telepresence Solution

  Hi people,

  I would ask you recommendations on how we implement the solution that we offer for the customer.

  • The client have existing CUCM running version 10.x
  • Cisco IP phones and Polycom video settings are saved on the CUCM for call control

  We have offered and introduce a solution of Collaboration Edge/MRA and integrate the system existing.

  The solution consists of new telepresence video infrastructure and endpoints:

  • Cisco Core Expressway
  • The highway from Cisco
  • Cisco TMS/TMSPE
  • Cisco Telepresense servers
  • Conductor of Cisco Telepresence
  • Cisco Telepresence Content Server
  • Cisco SX Series (to be placed on the existing CUCM) endpoints

  There are two options that came out in my mind, how to integrate these new infra to the existing.

  1 CUCM will take all the call control and integrate all of these new infrastructures (managers, telepresence servers, TCS)

  2 expressway Core (VCSC) will take control of calls for drivers, the telepresence servers, TCS and create between VCSC and CUCM SIP trunk.

  What is the best option? Need your recommendations.

  Thank you.

  Hello

  Yes, you can create a SIP of CUCM trunk to Trade Commissioner as explained in the following guide

  http://www.Cisco.com/c/en/us/TD/docs/Telepresence/TCS/6_2/administration...

  Manish

• ESXi 5.5 - Virtual Machine fails to PING the gateway and/or other hosts

  Hello ladies and gentlemen

  I have installed HP DL380p Gen8 1 with vmware ESXi 5.5.

  I have 1 with 2 vmnic Virtual Machine port group - vmnic0 and vmnic1 connect 2 virtual machines. If I have the TEAM network cards, a VM (selected) randomly is able to PING to the gateway while the 2nd VM is not. ESXTOP in this case, don't watch not the physical NETWORK card that each virtual computer connects to but says 'all' to the title of the team-TEDDY.

  If I break the team and you use only vmnic0 - none of the VMs connet to the gateway. If I create the vSwitch with only vmnic1 as usable NIC (vminc0 - unused) - once again only 1 VM (randomly chosen) is able to PING the gateway while the other is not (and two VMS use vmnic1 as the uplink to the vNIC).

  The physical ESX host connects to a Catalyst Cisco 2950 switch.

  Can you please advise where can I go from here? It could be a problem with the VLAN when it comes to vmnic0 (since none of the virtual computers are able to connect through this vmnic), but what is happening with vmnic1 (a virtual machine connects randomly while the other doesnot)...?

  I tried several forums without success.

  Managed to solve this one-

  1. The uplink switch (Catalyst 2950) was Port security enabled on all THE Ports.
  2. I had to disable the port on a given set of ports security (to which are connected the physical network adapters).

  Everything seems to work fine now.

  Bravo to all the entries!

• Secondary IP gateway and manual config

  Hello

  Our virtual machines have a first Witch of the NETWORK adapter is connected to an external network and IP assigned by VCD, now we want to add a secondary NETWORK card but we want to manage the IPS manually, because the network is connected to a LAN client.

  Can I just set the type of DHCP allocation? If I understand the "static IP - manual" will always use the Gatewat configured on the Pool of IP?

  BR

  Andreas

  VCD will not configure both gateways, it will only set up a gateway that is associated with the main NETWORK card marked

• vCloud 5.1, edge Gateway and NAT

  I have a setup of vCloud 5.1 with VDC to separate organization for each customers, an external network with public IP addresses. Edge Bridge enables us to connect the VDC organization to the outside world. When you create the bridge aboard it allocates one of the public IP address to it. If you want to give the vApps/VM behind this edge gateway access to the internet, you need to add a sub assigned the public IP address pool IP address. Then you can create a rule from NAT for this network, and then these VAPP can access the internet.

  It seems a waste to my public IP addresses that I need at least 2 IPs public by customer.

  If you try to use Add address IP public primary which is allocated for the edge gateway create the rule Source NAT, it is said that ' external IP address should belong to the range of IP addresses allocated under '

  But if use vShield Manager, you can change the bridge on board and can create an of Source NAT rule with the IP wil and VAPP primary public access internet.

  Has anyone encountered this problem?

  Is this a limitation with vCloud 5.1?

  Is there any problem set up perimeter firewall via Manager rather than the interface vCloud vShield?

  Gateway that primary external IP can be added to the pool of suballocation. There is no need for the two survey periods

• VLANS, DHCP, subnet, gateways and Multipathing Setup Question

  Hi, I have a House VI3 test network configured like this:

  Netgear wireless router,

  Adapter plugged into Port A1 of HP Procurve wireless game layer of 4000 M 2 switch with 802. 1 q (provides the uplink to my router upstairs that serves internet)

  VLAN by default 1 is 192.168.1.X/24

  On this switch, I have 2 ESX boxes with 4 cards each, Openfiler iSCSI target and a Windows XP Pro box running my Virtual Center.

  I have a Virtual Machine that running SBS2003 with also serves as my DNS server and my DHCP server.

  SBS2003 - 192.168.1.6

  Gateway (router Netgear) 192.168.1.1

  ESX1 - 192.168.1.10

  ESX2 - 192.168.1.11

  XP Pro - 192.168.1.50

  Well, with that of the road, my question is I want to set up a VLAN on my switch Procurve to separate traffic by default network, iSCSI and vMotions traffic.  By ESX Server best practices. to install a second Nic vKernel or SVC Nic console, they must be on a separate subnet with a defined gateway.  If I create a new vLAN for iSCSI and assign a network adapter, the network traffic will not be able to see my gateway. I also need my DHCP server to receive requests from any computer on any vLAN individual and issue a corresponding IP address.

  Now, what should I do?  If I create a vLAN Tirtiary or the second, I'm not able to see the DHCP server of these VLANS?  I can only UNTAG a port in 1 vLAN and port of marking abandon any connection to my DHCP server.  On this switch I assign IP addresses for individual VLANs, but this did not help.  DHCP isn't bradcasting across multiple VLANs. Am I missing a piece of hardware to provide ACLs or something?

  I don't know where to go from here, please help.

  Hello

  To route between VLANs, you must be a switch of layer 3, is a router configured as "a router on a stick", which is essentially a port of the switch, configured as a trunk, connected to the router that is configured with a number of interfaces, one for each VLAN so that it can route traffic between the VLANS. Now create a VLAN for VMotion traffic is fine as has no need to be routed. The VLAN for iSCSI and VLAN to the Service console will have to be sent to iSCI work properly. DHCP can work through several VLANS but need aid IP to be configured on the switch.

  Concerning

• Difference between Oracle transparent gateway and Golden Gate

  Hi guys
  
  Could you please delete the confusion, what is the difference between the transparent bridge and Golden gate? they are same? In which cases of which one to use?
  
  
  Thanks in advance

  user8896122 wrote:
  >
  Satish Kandi says:
  Transparent bridges are a mechanism of "interrogation" cross-RDBMS
  >

  If you mean if an application (designed to work with oracle only) can actually access SQL server or DB2 without any change. If I have a transparent gateway on top of DB2 or SQL Server?

  You took me. I should have used different words.

  Lol TG is a mechanism to query the other Oracle's RDBMS. GG is a mechanism for replication between any RDBMS.

• II Gateway and TS-Intermidiate file requirements

  Hello

  I asked in this thread on the TestStand Intermidiate file.

  http://forums.NI.com/T5/NI-TestStand/requirements-gateway-TS-Intermidiate-file/m-p/2288998/highlight...

  At the time I write my own Tango intermediate file generator. To make it simple as possible, that I tried to draw the OR s her. I couldn't explain one of the attributes is: "canGenerateResults" in the step element tag.

  Is it possible to tell me how this value of the indicator is created?

  Concerning

  Jürgen

  Hi Daniel,.

  what you have is the attribute: recordResult.
  but the word 'sequence' reported the flag at right.
  Attribute: canGenerateResults ist created by.
  Sequnence properties-> tab: general-> the box off the result recoding for all stages.

  Concerning

  Jürgen