General Noob question

Similar Questions

• Noob question: Playbooks all have the same performance?

  I know... noob question. I am to complete my first game PlayBook and before I submit the app store I wanted to make sure that hardware performance will be the same on all the playbook or will it be something because of the performance issues on a per-device basis? I hope that this will be similar to a console where you can expect stable performance. THX.

  All devices (currently) work the same in the same conditions.

  That does not mean, however, that you can treat it as a console.  A console runs only a game and nothing else (in general).

  The PlayBook can run multiple applications, and among other things, a user can 'Behavior of the Application' setting configuration Mode Showcase, default, or standby, what determines if your application runs or stops when it is idle.  If they are in window mode, they may have other things at the same time.

  To a first approximation, however, "even in the world" is probably correct, for now.  Don't forget there will be different tablets in the future, with specification different but compatible with your app... not quite like a console there where many games is basically orphaned (or requires a port) when a new generation comes out.

• Noob question: autonomous AIR .bar files?

  Sorry for the noob question, yet to learn these things from the air. When we create a .bar file, it is the only file position, does it include the runtime air, flash, etc, etc, or is it always require an accumulation of air / flash runtimes on the device? THX.

  The .bar file does not include the time of execution because the runtime is already preinstalled on the Playbook.

  Air is really integrated into the PlayBook so you don see the difference between a native app or an Air application.

• NooB question: Cup titles and a schedule of transfer

  Let's say I have tons of tracks.  In the Middle, I find I want to firm up a few seconds of footage.  I can cut, or delete the clip, but I still have to select all the following clips and make sure they move upward.  There must be a smarter way of removing a few seconds of footage and moving upward?

  Sorry for the noob question, I searched on google and didn't know what to look for.  I am open for more information that can help me to tighten my research thus.  See you soon.

  The answer will probably depend on more factors:

  Are there in your Timeline, Clips above the area of the Clip you want to Trim?

  What you want to happen to those?

  Are you only concerned to "strengthen" the Clips on the same video track where you cut, or Clips on other tracks video too?

  It is likely that the tool Edit Ripple, or Rt-click and Ripple delete, will do what you want, but who can count on the other Clips on other tracks, and video that you need.

  Good luck and please let us know a little more.

  Hunt

• D.I. box noob question

  Hi all

  Sorry for the noob question, but I need something clear up if possible. I was about to buy a box for injection and then had a query on them, and if I actually could benefit in this scenario...

  
  Fig 1. is how I currently record.

  Fig 2. is how I would do it with di direct box

  

  My question is... in this configuration, the d.i. box would make a difference to the signal? or he would only make a difference if I was going to live guitar to box, the sound card?

  Thank you for all your help.

  In my opinion you have basically three alternatives for the recording of the guitar:

  1. get an amp excellent sound, recording with a microphone, or more, in a room of good survey.

  Challenges: you'll probably need a studio proper, or at least no neighbours, because it could become LOUD. It takes time and experience of mike a good amp and even microphones expensive (several). Result depends on the acoustics of the room more than you think.

  Another way here, is to get/build an isolation area around your amp, which will be a kind of micro studio for it, allowing you to play hard and with a good tone, but in a more controlled environment. Many advantages for this make. Unfortunately, the expense can also be 'pro' - but I don't know there are DIY solutions.

  2. record of the amp 'dry' via either its line (send FX will also) or use a ' soaking power allowing you to put the amp (some sounds so much better AMPS), but with a low volume in the room. You can connect the device of soaking directly, or give the speaker the "tame" signal and mike the amp without disturbing the neighbors that it now. Good power soaks don't come cheap (?). Dry recording, for example by not using mike, often sounds like this: dry. It depends on your style of music, but an electric guitar should probably be considered an acoustic instrument. Instead of a diaphragm in wood, it has a speaker. The sound, often, we want to achieve is an amp of good sounding in a good room, which is an acoustic sound. You simply cannot get to an exit row or direct to a soaking of output power (not president). He needs treatment.

  3 use a program like GuitarRig, Amplitube etc. No installation required, regardless of the size of the room and acoustic sound (except that the acoustics of the room always will affect listening!) or mike. The software simulates the amps, effects and even mic configurations; added the "airplane" that you will not get a direct connection. Once again, according to your style. If I were Bill Frisell or Jim Hall, i.e. anyone with an as most of their music very "naked" guitar sound, I probably does (but these guys have access to the great engineers too...), but in a pop idom / mixed rock with other instruments and certainly to do demos, that's actually what I would recommend. Especially for us space challenged who have neighbors and an infinite time either. No, you will not look like 'all the world'; It's garbage in French - garbage out as always (many are disappointed by the present, but some are happy, it is always the case)

  All you need is a sound card with an instrument of entry. If you have a * good * sound card already who is not entered instrument, you can consider a DI box. Otherwise I'd say it's redundant.

• Battery and general order questions for the MacBook Pro 13 inch retina (2015)

  I just bought a MacBook Pro of the retina (100% Brand new) as my first product Mac and I love it! I want to keep this laptop for as long as I can especially for the price I paid for it. Battery is my number one concern, and I want to keep the health of the battery as healthy as possible.

  On a daily basis, I tape regularly documents, surf the web, watch YouTube, movies and videos, and non-intensive games like Flash games.

  Here are my questions:

  If accidentally you unplug the charger and plug it back immediately, this indictment as a load sprays? What defines a cycle?

  Is it safe to use your laptop while he's in charge?

  What are some tips to keep the battery a longer period for general use?

  What are some tips for maintaining the health of the battery?

  Why is it important to calibrate the battery each time in awhile? How can I do?

  What are things which reduce the wear of the battery and how to avoid them?

  What applications are useful to monitor and maintain the battery?

  What are your thoughts on getting a replacement battery for Apple laptops?

  What are your personal recommendations on set make the laptop last as long as possible?

  Thank you very much for the help!

  Answers to most questions can be found here.

  https://support.Apple.com/en-us/HT204054

  Modern battery of Macbook didn't need to be calibrated.

  You can use your Mac while being charged.

  I use app battery of nuts of coconut, but not necessary.

  Best.

• Noob question, youtube

  Hi im a noob to photoshop etc, and has recently started a YouTube channel for downloading music.

  Ive seen several channels that resemble the type of this http:/// www.youtube.com/watch?v=Apc4XT8xUvghttps://www.youtube.com/watch?v=Apc4XT8xUvg

  Does anyone how to make a video like this with snowflakes etc. and what program to use?

  Sorry if this is the wrong forum to ask this question in.

  I'm guessing that Adobe After Effects (perhaps with a plug-in):

  Video effects, Visual effects software | Download the free trial version Adobe after effects CC

  Can pick up a quick getaway in the After Effects forum and see what they say here as well.

• Honest Noob question...

  Hi all

  I am new to this site and new to VMware in general. Just a little story about me before I ask my question: I've been in the computer industry is going on 12 years. I take CERT in MCSE, CCNA and also have an A.S. in Information technology. I recently joined the ranks of the unemployed, but I decided that instead of wallowing in the mud, I would add as an indispensable another cert to my portfolio. Just before I was laid off, my company has invested in VMware. I was not outside the installation and implementation but he was fascinated by the technology of none-the-less. I decided to go for the VCP through HP and later training cert.

  My question is that this company will be in vain because of my lack of experience with VMware technology (my virtual knowledge is limited at best to VirtualPC)? I'm sure there are many others out there who are in the same boat as me. An input or advice would be greatly appreciated.

  THX in adv...

  First of all I suggest start with an ESX Server, you can practice install ESX on a VMware workstation: http://knowledge.xtravirt.com/white-papers/esx-3x.html

  Read PDF files: http://www.vmware.com/r/resources-documentation.html

  Try to get the most out of your course and ask questions if you are not sure.

  If you can afford to get a cheap server and get ESXi to really get hands on experience: http://www.vmware.com/download/esxi/

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!

• Totally new with noob questions

  OK so im totally new to developing with Flex. My company uses flex to create RIA that work to read and write with SalesForce CRM. I use the salesforce toolkit and have an understanding of how everything works great base. what im trying to do is take the data which are entered in a text box and who present for salesforce. Currently, the first name, name and phone number are in the code. have created text boxes, I don't know how to take the value that is entered in one and make that equal to the value of its corresponding field.

  like I said... total noob

  If you are in ActionScript. FirstName = firstName.text should be fine, but in MXML and sometimes in ActionScript, you may need this:

  VAC. FirstName = "{firstName.text}.

  If this post has answered your question or helped, please mark it as such.

• Noob question to try to replicate the rows in a table

  Simplification of the problem is that I have a table with user_id, name, year where useridentifier is pk. I would like to take advantage of all the lines that correspond to year = 2008 and insert them into the same table, but start the user_id a number and year = 2009.
  
  I know that this does not work, but that's what I want to do in noob-code:
  
  INSERT in the TABLE)
  user_id, name, year
  ) (VALUES
  SELECT User_id_seq.nextval after starting at 3500, name, 2009 of the same table to insert in the place where year = 2008
  );
  
  I considered using a temporary table, I've also seen mention of sliders, but do not understand what they are. I'm really, really new to Oracle and SQL in general, but am familiar with programming and shell scripts. I know more in-depth research could land me what I want, but I think my search syntax would be just as weak as my knowledge of the subject. I just think that it's something so basic and easy that my research are not using the right conditions to catch a shot.

  Hello

  is a fixed number practice

  INSERT INTO TEST_1
     (SELECT t.user_id + ,
             t.NAME,
             (t.YEAR + 1)
        FROM TEST_1 T
       WHERE t.YEAR = 2008);
  
  COMMIT;
  

  Kind regards

• Where can I ask a handful of general order questions about Firefox OS as a consumer and get the answers? (a forum or something similar)

  I have about seven questions about Firefox OS. I'm potentially interested in opting for a tablet that works instead of Android or iOS. I couldn't find a place to ask questions like that. Thank you!

  https://support.Mozilla.org/en-us/forums/Firefox-OS-English-Forum

  There is another option.

• understanding scale noob questions limited.

  I wanted to convert a whole range of-1000 and + 1000 to 0 and 255 how im a complete noob.

  Thank you.

  You add and multiply.  Add 1000 to get your shift to the right place.  You now have a range of 0 to 2000.  Now multiply by 255/2000 (I let you do the reduction).

• Assistant of the output instrument always 0.0 without input series, where's the trigger? -Noob question

  Guys keep with me, I'm another PLCs and VB/C programmer, there are still the old paradigms of locking my head.

  See attached vi. After that I disconnected the entry in the series, the wizard exits still instrument 0,0 to its terminal at regular intervals about 1 hz. Now how does the wizard output always inst 0.0 without a trigger entry series? There must be a timer somewhere... but I searched everywhere there is no timer, including by opening the front panel of the wizard of the instrument. I watch the whole bulk of the loop and block VISA etc, there is no synchronization setting.

  So my question is, if there is no entry of series by using the instrument, which is the parameter object that triggers the instrument Wizard still out 0,0 at regular intervals? Where the object/setting?

  

  Thanks in advance

  Great big thank you! I can sleep tonight! Muahahahahahha!

• Can cause of Google Chrome that any general Windows questions as screen freeze or startup problems? Thank you.

  Recently installed Google Chrome and started to add some PC problems. This could be a coincidence, but I was wondering if the Chrome can somehow interfere with the operation of Windows. Thank you for any light on the topic.

  Hi Anoop,

  Thanks for your reply. I checked the links you recommended, but did not find anything of note when I checked the logs events or performance. (I can't seek enough carefully.)

  Fortunately, the problem disappeared in the past few days and he can not Google Chrome to what has caused the occasional screen freezes. To answer your questions, Frost moved not just with Google Chrome, there is no error message and I have not recently updated the latest drivers.

  In any case, at the moment seems to agree, and if a conflict between Windows and the Chrome is not a good experience then it's probably just a coincidence that I met problems with my shortly after its installation.

  Once again, thank you for your help.

  Kevin.

• EA4500 + ADSL router: networking noob question

  Then... I'm not sure of the right words to use, but this is the case I would appreciate the help. I tried to figure out how to survive myself, but I find it a little confusing - however, if you think I just need a networking 101 do not hesitate to send me to appropriate information sources (I've tried a few, as I say, but I have not yet found a place where my situation fits!).

  Quick back story: I have a cheap TalkTalk ADSl router (D-Link 3680) where the Wireless does not properly in the House. So I just got a DSL EA4500 router for better strength/speed/compliance wireless - you'll just have to forgive me for not having an ADSL router, which I realize may have been a simpler solution!

  First of all, I put the (D-Link of TalkTalk 3680) ADSL router in Bridge mode and got this and the EA4500 work together which was great as it goes. However, I would be hard...

  I have a tower PC and wish to receive wired ethernet network. While I know in the set - up above I can run a cable from the 3680 to the EA4500 and then another cable to the PC because the PC is closer to the telephone (with the ADSL router) Jack, physically it seems wiser, if I take the PC of the 3680 ethernet connection (along with a second cable 3680 to EA4500 connection for the wireless). It may or may not be relevant that the 3680 is a Fast Ethernet output, as is the network PC card (i.e. are not Gigabit).

  I don't know (a) whether the above configuration is possible and if yes, how, or (b) the question whether in terms of networking, it is best to cable to the EA4500 computer (even if this will create a longer path to the PC and the wiring more).

  Meaning, and if yes maybe someone could give me also a term for what I'm doing?

  Help gratefully received! Garreth

  3680 port LAN (bridge) => EA4500 Port WAN (router)-online PC peripherals and wireless

  It's the best configuration and nothing should be connected to the 3680 other than the EA4500.

  The physical location of the electronics is not important, unless you can not run cable or wireless signal is low.