Generator of sinus in Mode of Interface Scan in time real (No.-FPGA)

Similar Questions

• Generator of sinus with cRIO

  Hello! I want to do a MSK modulator on cRIO 9012, but I can't launch any Upconvertor, or generator of sinus on this module!

  This screen with the software and hardware installed on the PC.

• Failure of XP Mode User Interface

  After update mode XP de Windows 7, update to reboot hung on logout. Now, it gives message on restart XP Mode User Interface failure.

  The message reads as follows:
  «You cannot start a remote desktop connection because the Windows login on the remote computer software has been replaced by the software incompatible msgina.dll.»

  To correct this problem, please ask the administrator of the remote computer contact the program vendor for a version that is compatible with Windows. »

  XP mode does not start safe mode. Message "cannot start Windows Virtual PC Host Process. Check the log of the events system for more details. Server execution failed. »
  The event log showed that the normal start of the items for XP Mode.

  Additional notes about XP Mode start in Normal operation:
  1 icon starts Windows XP Mode.vmc
  2. from the virtual computer dialog box is displayed.
  3. the User Interface dialog appears.
  4. hibernation dialog box appears and closes after completion.

  I also tried a system restore, but that did not help.

  Hi James,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

• In time real system startup in safe mode

  Hi all

  I'm having an incredibly frustrating problem.  My RT PXI chassis decided that something has gone wrong.  I don't know what that might be, but now it starts in safe mode, try to restart three times.  I have never been able to recover the logs via MAX (I get wait times), but if I go into the physical drive via ftp and poke autour in the errorlog.txt, I find the most recent error:

  29/10/2015 03:25:09.153 0-2147220694 000 Incompatible schema is detected, but no specific DD can be identified as the source.
  Please refer to the file "c:\ni-rt\system\mxsSchemaError.log" for more information.
  CmxsNeoStorage::ValidateDBStructuralIntegrity()

  If I go into the file, to which it refers, I find the following error message:

  [10/29/2015 03:25:09] * COLLISION DETECTED * between object with class NeoID:0 Database_Header located at 0 (256) and 1 list free (28344)
  [10/29/2015 03:25:09] Incompatible schema detected, but no specific DD can be identified as the source.

  Anyone has any ideas on this?  I tried all software uninstall, then reinstall.  Everything seems to be ok until I have install drivers DAQmx and dependencies out there.  But I don't think this is directly related to the DAQmx.  I think it's links with one of the dependencies.  Any input is helpful (although I want to avoid having to format because I don't have a recent copy of the MAX configuration for the system).

  Cheers, Matt

  Have you recently changed your LabVIEW versions (for example, from 2014 and 2015)?  You may need to check/put to update the software on the PXI system.

  If all else fails, it is not so difficult to "start over" with a hard drive reformatted on the PXI and install a new RT system, especially if you have a controller that does not boot from a floppy disk (don't ask--we have a lot of 8176).

  Bob Schor

• After the closure of full concert screen in edit mode, the interface does not

  If I create a new concert, or open an existing one and I full screen it in edit mode, when I close and I'm back to the main menu, I can't interact with the interface; It does not. I can't click on anything, the menu bar does not work, the 'Choose' button flashes, but when I click it, nothing happens. The only way to get the application to work is to right click on the dock icon and click "exit". So, when I reopen it, I let the same windowed concert and close, this isn't a problem. Everyone knows this?

  I encounter the same problem on my MacBook Pro 2013.

  Version 3.2.4 (on both machines)

  I would add that if I restore the concert before closing, I don't have this problem and I can communicate normally with the menu that appears after the closing concert.

• PXI_Add GAUSSIAN additive white noise to a carrier generated using NI RFSG mode of arbitrary waveforms

  Hello!

  Does anyone know how to add AWGN carrier generated using NI RFSG?
  I know how to generate a signal CW using NI RFSG arbitrary signals mode (see attached file), but I have not found out yet how to add AWGN to it.

  Thank you!

  Aina

  Hi Aina,

  I can always be understanding not completely exactly what you ask. So in my example I gave you, we add the additive white noise GAUSSIAN on both I and Q tables separately. What you are looking for is actually add noise to the signal after he was upconvertis. Does this sound right? With our equipment, it is not possible because the baseband I / data Q are mixed with the carrier in the material as the last step before that it is generated. To add the additive white GAUSSIAN noise after the signal has been on the carrier you would need a noise generator. The best you can do is add the additive white GAUSSIAN noise to the baseband I / Q, then upconvert it based on the carrier frequency, you specify in RFSG. Let me know if this has been helpful for you.

• Problem with display in the design mode User Interface

  Hello! I use the model #2 from the Adobe Developer Connection found here: http://www.adobe.com/devnet/dreamweaver/articles/dreamweaver_custom_templates.html

  When I add more than 10 navigation buttons they begin to appear to the right of the first 10 in design mode.

  There is a screenshot showing the problem here: http://www.sallyaverill.com/dw_grab.html you will see in code view, it is simply a list that it explodes into design mode, pushing the content to the right and pushing an accordion Spry Panel.

  She looks like and acts very well in mode live view and in a browser, locally and remotely, but I'd like to see it in design mode. What is the cause? Please let me know if there are more necessary information. CS4, WindowsXP

  Many thanks - Sal

  Text dims to the overview is because you called a: hover, but not li: hover.

  Instead of

  .leftnavigation a: visited {
  color: # 66;
  }
  .leftnavigation a: hover {
  color: #ffffff;
  background-image: url(images/nav_down.jpg);
  }

  follow these steps:

  . LeftNavigation li: visited {info style here}

  and

  . LeftNavigation Li: hover {info style here}

  Make sure that keep them in that order! You want your Pseudo-classes to come in this order:

  Li: link link

  Visited li: visited

  Hover li: hover

  Active li: active

  Again, it won't be your entire list change (menu point) color, so you could also add funds... at the present time, you apply a style text only (text styles of color; background-color styles menu item)

  Beth

• What can I do if the TV turns on and goes into sleep mode? Standby blinks 9 times

  Model KDL-46xbr2 power button press that TV is available on any photo goes into sleep mode which flashes 9 times stops and continues to blink 9 times

  Where is the help people?

• Controller time real-time FieldPoint or Ethernet interface

  Good afternoon

  The first feature listed on the PS-2000 product page is:

• Stand-alone embedded real-time controller or on PC distributed i/o Ethernet interface.

Everyone was able incorporate a PS-2000 as an Ethernet on PC distributed i/o interface?  In other words, have the PS-2000 as a FP-1600 Act?

There are some discussions forum discussions that dance around the subject, but I found no really one who responds to her.

Thank you

Ed

Hi edlad,

After playing with a FP-2010 for a while, I think you need to install LabVIEW Real-time on the controller to make it work, even though you are technically not to use it because you are not running a VI/executable on the controller. Regarding your problem with the installation of LabVIEW 8.5.1 on a PS-2000, it is disturbing because it should not be a problem that at all. In fact, I have personally been able to install LabVIEW 8.5.1 on many FP of the 2000s. For that matter, I suggest reformatting of the PS-2000 of MAX and try again.

ThinkG: Regarding your question on the use of a PSC-2220 to connect with belvedere, I don't know because the support of Lookout is managed by our subsidiary in Shanghai by e-mail only. However, I don't know that you can use this second ethernet port to connect with another network (cFP-180 x) FieldPoint module using the FieldPoint drivers. Here are some good articles about this configuration knowledge base. I hope they are useful.

http://digital.NI.com/public.nsf/allkb/F602F6F1B243282686257495007695BB?OpenDocument

http://digital.NI.com/public.nsf/allkb/67F94BB93BCE32CF86257367006B3659?OpenDocument

Thanks for choosing National instruments.

Aaron Peña

National Instruments

Technical sales engineer

http://www.NI.com/support

• HP Officejet Pro 8600 911: scanning - have to choose by default software to scan every time that I scan to computer.

  Whenever I scan to my computer, when the analysis is first begins and when it's done, I have to choose among the following options: HP Scan; Picture It 7.0; Photo shop; Photo shop at the beginning or analysis complete. I only use HP scan and delete the other "suggestions". Any suggestions here?

  BINGO! That was the ticket. It was under properties for analysis, and then click event tab.

  You can then choose which program to use for the analysis.

  Thank you! Has been a pain for a long time. I was hoping that Windows 10 would fix it.

• Acquisition of Digital Data Output: generate a pulse with a specific width (depending on time)

  How can I generate a digital pulse with a specific width? I was not able to find examples online. Thank you!

  With the USB-6000 - essentially none. He has only digital software programmed according to i/o. on your system, you may be able to generate impulses at speeds up to a few hundred Hertz, but there will be a considerable amount of timing jitter. Tens of milliseconds can be common and even longer variations may occur occasionally.

  Please indicate which are the times for your impulses, so someone may be able to provide recommendations specific to your needs.

  Lynn

• Silent mode - for a period of time only. After update to Android 6.0

  Hello

  Cannot know how to silently for a more predefined period of time. Marshmallows before we had the choice to put this silent mode should just modified for the next 30 minutes, two hours etc. It is a very nice feature for me, because too often I forgot to turn on sounds after a meeting.

  Before this feature came in the Android, I used an app that defined silent mode with a timer. Do I have to re - install an application like that?

  I found where you can set (by chance) all trying to solve my problem.

  If you access do not disturb in the menu drop-down (if it is not there then it is one of the icons you add to the grid) when you select the option it offers the possibility of no end or for a period of time time.

  I am happy I found it too since I also use it when I go to meetings.

• Sleep mode takes a lot of time in Vista

  going to sleep too mode takes too long faar

  * original title - go too "standby" takes too long faar *.

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  Read the info on sleep disorders in the tutorial above.

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Also read this tutorial; as well as the 'related links' at the bottom of the links above.

  See you soon.

  Mick Murphy - Microsoft partner

• Win 7 x 64, IE9, MSE in my Dimension 9200 and would benefit from this system to have the free version of SUPERAntiSpyware scan from time to time?

  I'm sorry if this had been discussed before.

  Be very careful with his habit while surfing the net and open attachments to emails, I understand.

  I have the free version of Malwarebytes on analysis on demand for eventualities.

  What have the SUPERAntiSpyware free version of scan. Is it more like the modern IE 9, Win 7 x 64 and the MSE are save enough.

  Concerning

  It has long been said here that having TWO SCANNERS ANTI-MALWARE's ON-DEMAND is generally a good idea, because it is possible that everyone can find something that the other lack (or more precisely, don't target).

  I have more confidence in the MBAM and it is my main anti-malware scanner.   But I keep SAS autour as well, whereas it is secondary.   [Some people (Joe?) use (or used) Emisoft Anti-Malware among their scanners.]

  SAS scan for the rejected, MMFA does not work.   SAS will find (a lot of) tracking cookies, that MMFA is not at all.   Tracking cookies are text files, and are therefore not the virus/malware themselves.   But they can contain information that can be read by others - and on that basis, some people like to remove them (for privacy).

  SAS also offers a beautiful 'Toolbox' s REPAIR- which, if you happen to need them, can be very convenient to access.   Personally, I believe that REPAIR options to justify keeping (free) around SAS.

  SAS FREE and MBAM are simply scanners/removers, which help cleaning problems "after the fact".   None of the two free versions offers resident protection/prevention "at the front".   Such protection realt-time, you will need to buy one of the paid versions.   in my opinion, MBAM PRO (paid) nicely full no matter WHAT antivirus program you use on your system - it may often catch the rogue/hard malware that "slides" by an anti-virus program. And as the saying goes, "an ounce of prevention is worth a pound of cure".

• Run Security Scan after time of scheduled time.

  Obviously a scheduled scan Windows 7 MS Security Essentials can not work if the computer is off when the scheduled scan time occurs. BUT, it will perform the analysis when you start following up?

  Appears not to be the case - has put in place an analysis scheduled for Sunday 02:00, but last month it was last run. As I turned off my computer work at the end of the day and over the weekend, I would have thought that the scan would say "Oh Hey, I was supposed to be executed yesterday. I think I should run now, so that I can do my job. "But the last time he ran was when someone else was using my computer on a Saturday and didn't turn it off later.

  I had the 'start the scheduled scan when my PC is on but not used' checked - if that's not enough not to trigger a scan? Don't know how long he waits to determine that it is not "on duty". Or what processes would be considered "in use", I run a number of updates to database in the background, as well as things like e-mail or Facebook who are looking for new emails/messages every 5 minutes or more.

  Please notify/clarify. Thank you.

  Use means the user interacts with the keyboard and mouse.  Other programs 'used' or the race only account as the computer being in use.