get a host with syslog parameters list?
I'll change our syslog server port. I can accomplish this with the following:
Set-VMHostSysLogServer -SysLogServer 'x.x.x.x:xxx' -VMHost '*'
After that I ran this I wanted to doublecheck that everything has been done. When I run the following, I get only the syslog server port, but not the name of the host. How can I get that it displays the name of the host as well? maybe even export to CSV?
Get-VMHost | Get-VMHostSysLogServer
Thank you.
You should be able to do it with a calculated property
Get-VMHost | Select Server Name,@{N="Syslog; {E = {Get-VMHostSysLogServer - VMHost $_}}
And to export the data to a CSV file, simply use the pipeline
Get-VMHost | Select Server Name,@{N="Syslog; {E = {Get-VMHostSysLogServer - VMHost $_}} |
Export-Csv "C:\report.csv" - NoTypeInformation - UseCulture
Tags: VMware
Similar Questions
-
Site hosted with BC not listed is not on Google of Muse Research
Hi again... another small question for you guys... my website www.crownmarketers.com is made with muse and hosted with BC. Put Ive done paragraph style (h1, h2, p, etc.) and also changed the names of friendlier to the search page and also added info to every image on the site under the image properties. I also did the metadata for each page, including description and key words. How can I make my site marketing Crown appear when I search google?
Hello
There is no set formula to get on the first page of Google. But it's important, "'make pages for users, not for search engines ', one of the most important factor affecting your positioning on Google is how much people are satisfied or pleasured on your Web pages." Few more things to consider.
- Before using a keyword, make sure its popularity, Wordtracker, Google AdWords, Google Trends or the research Index of Yahoo! Buzz. Each of these sites gives an overview of the popularity of the keywords.
- Keywords should focus on the overall content of your page
- Avoid using images to display important names, content, or links. Google crawler cannot read the text in graphics. Use ALT attributes for images
- If there is more then one way to reach out to the same page, indicate the canonical (preferred) version of a page more information about the canonization.
Also, take a look at these guidelines by Google itself, especially the "Quality guidelines"
Help to webmasters - tools for webmasters
Hope this helps
-
the list of hosts with specific base attached?
Hello:
I am new to the script and hope someone will help me...
I need to list all the host with a specific reference (on Update Manager) attached...
I know the commands 'get-vmhost' and 'get-basic-test name', but cannot link together...
Thank you
You could tie these together like this 2 cmdlets
Get-VmHost | where -filter {($_ | Get-Baseline -Name "test") -ne $null}
You ask all ESX hosts and then you filter the resulting list.
The filter passes only VmHosts with the base line 'test '.
-
syslogging to 2 host with different levels of severity?
I have a PIX that sends the logs to a host with Cisco syslog installed. It is configured to send messages of level 3 (as required by the internal standards) of gravity.
I have another host which collects the theses papers too, but I want some info - level 5 or 6.
? is it possible to config the PIX to send logs on 2 different hosts with different levels of severity?
you configure the pix to send to 7 on a syslog server. configure you this server to send events to the level 3 to another server. I think that it should be possible
-
I have "Always deprived of the use of navigation" and "Accept the Cookies from Sites" with "Third Party Cookies: to visit ' but with a long list of site Exceptions, I intend to block." Since Fx32, DISPLAY COOKIES still says there is nothing to show. I understand the incognito automatically deletes history (including cookies) on Fx is closed, but after some extensive navigation, I expect to see some session cookies only from sites that is: a) are listed ALLOW/SESSION on my Exceptions list; or (b) are not exceptions listed at all. The list of exceptions has two categories: Ad Server sites I block to avoid hearing; and ALLOW the sites I visit have warn me to allow their cookies. Even after the connection to these sites (connection requires their cookie) DISPLAY COOKIES always says that there is not.
1 I'm wrong about PRIVATE BROWSING, it does not control the placement of the cookie, which leaves to ACCEPT the COOKIES and the parameters of the Exception, but erases them cookies and another story when Fx closes?
2. so where's my cookies I know work when I login, for example, my mail server or Amazon?
3-do I need to install the addon from SQLite-Manager to see the cookies .sql file? It will work with Fx32 +?Thanks for the input, cor - el. Once I realized where is the console command line and exceeded his SPAM warning, cookie.split () / join () worked very well: a lot of output, especially warnings of javascript and HTTP requests, at least a cookie. But then I wondered:
I pressed accidentally on [CLEAR] and console obeyed, of course. So I enter again the command (several times) but now get no reply - msg just empty console pane. Close the current tab from fx, then open a new web console, connect and I reinterpret the split () / join (). Now console only statements interprets this command error msg: > undefined (attached screenshot).
So my question: can this js command split () / join () consider only once? I have to adjust something first? It seems the PRIVATE BROWSING feature design "drape" of all the cookies I allowed to-I assume to keep them from being seen, that's it? So can a Web page script place a cookie, and then later in the same session back or questioning? A page can simply include a document.cookie.split()/join () command in the script?
In any case, I'm happy to have your technique and grateful. Thank you. I'll try it as a bookmark shortly.
-
Functions defined by the user with several parameters
I set features three following user using "Define."
UF1 takes a single patameter;
UF2 takes two parameters;
and UFX takes two parameters - with the second is 'X' in the definition.
Œuvres F1. F2 is the EVAL of F1 version and it works too. User functions only seem to work fine.
F3, a function of two user settings, produces a graph of NaN.
F4 is the EVAL of F3 version. Note that 'B 'is not replaced by 1'. Also produces a NaN chart.
F5 produces a graph of NaN.
F6 is EVAL of F5. The 'X' is not replaced (even with the ' B' above), and even if it looks like 'X * X', it also produces a graph of NaN.
Is it possible to get defined by the user, with several parameters, features work by tracing the curve?
Hi!, Fortin:
If you download and install the ultimate Firmware with the version of the software: 2015 6 17 (8151), with the number of Version: 1.1.2 - 11, you can trace your examples of definition of the function, with curves and values, without NaN.
-
Original title: programs get forcefully closed with user entries
It becomes a common problem. I play the game of Garrys Mod, when its about done with 'send customer... '. "or other words, by sending the list of add-ins to the server, it fogs upward and then an error pops up saying"HL2.exe off work"of such and such, its normal for the program to do and this happens more often and moments later, he continues with normal function, but this time, windows does not allow it.
Hello1. have you made changes on the computer recently?2 is this number reserved only for this game or any other games and programs too?Method 1.Many users have solved this problem by disabling the DEP (Data Execution Prevention).See the Disable DEP for an individual program section in the article below to disable the DEP for this game.
Change Data Execution Prevention settings
http://Windows.Microsoft.com/en-us/Windows-Vista/change-data-execution-prevention-settingsMethod 2.It is a possibility that a third-party application is causing the conflict. Let us try to play the game in the State of clean boot and check if it works very well.
See the article below for more information and measures.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Equalogic: grpparams syslog-server-list agreeing not to port
I am trying to add a target server syslog with a custom port. It does not accept the port via the GUI or the CLI.
I type grpparams syslog-server-list x.x.x.x:yyy
It is said "% error: invalid IP address '.
the GUI and CLI accept IP with no port.
Is this a bug?
Thank you
James
Hello
Sounds like the bug in the documentation.
It has been a feature requested for some time
Don
-
C20/SX20: is there a way to get the cdr with loss/jitter of the stats?
I'm trying to get a report with loss/jitter, but doesn't cdr can not find a way to do it.
(a) TMS is able to report COR but only on the participants/duration/encryption/protocol of appeal
(b) C20 web gui has information but only with a number of clicks on and only for a call each time
(c) API C20 (cli) I found some commands, but nothing for the loss/jitter
I tried xstatus Diagnostics appeal channels-> only for calls in progress.
tried xHistory recent CallLogs | Call-> nothing usableIs it possible to get the cdr with jitter/loss for each C20/SX20 counters in a framework?
Methods to obtain these data is exactly what you have listed and must be carried out during the call.
-
count the number of targets, devices and paths by hba for each host with powercli 5.5
Hi all
I'm writing this Question again in the community, was not able to found the answer I was looking for in the nets:
https://communities.VMware.com/thread/516226?start=0 & tstart = 0
https://communities.VMware.com/thread/293531
I went through the scripts provided in the community, but seems that t not work on powercli 5.5.
///
# The target account, devices and paths for each host
Get-Cluster $cluster | Get-VMHost | Sort-Object-property name. {ForEach-Object
$VMHost = $_
$VMHost | Get-VMHostHba-type FibreChannel | Sort-Object-property device | {ForEach-Object
$VMHostHba = $_
$ScsiLun = $VMHostHba | Get-ScsiLun
If {($ScsiLun)
$ScsiLunPath = $ScsiLun | Get-ScsiLunPath | `
Where-Object {$_.} Name - like "$($VMHostHba.Device) *"} ".
$Targets = ($ScsiLunPath |) »
Group-object - property SanID | Measure - Object). County
$Devices = ($ScsiLun |) Measure - Object). County
$Paths = ($ScsiLunPath |) Measure - Object). County
}
Else {}
$Targets = 0
$Devices = 0
$Paths = 0
}
$Report = "" | Select-Object - property VMHost, HBA, target devices, paths
$Report.VMHost = $VMHost.Name
$Report.HBA = $VMHostHba.Device
$Report.Targets = $Targets
$Report.Devices = $Devices
$Report.Paths = $Paths
$Report
}
}
///
I went through the script LucD posted below: but it's not exactly what I'm looking for.
LucD : can you please change the same for me please. to count the number of paths per hba for each host with powercli 5.5, devices and targets.
//
$esx = get-VMHost < host name >
foreach ($hba to (VMHostHba Get - VMHost $esx - type "FibreChannel")) {}
$target = ((get - see $hba. VMhost). Config.StorageDevice.ScsiTopology.Adapter | where {$_.} Adapter - eq $hba. Key}). Goal
$luns = get-ScsiLun - Hba $hba - LunType 'disk '.
$nrPaths = ($target | % {$_.}) Lun.Count} | Measure - Object - sum). Sum
Write-Host $hba. Device ' target: ' $target. County "devices:" $luns. County ' path: ' $nrPaths
}
//
I'll be grateful for any help.
Tarun Gupta
Try something like this
{foreach ($esx in Get-VMHost)
foreach ($hba to (VMHostHba Get - VMHost $esx - type "FibreChannel")) {}
$target = ((get - see $hba. VMhost). Config.StorageDevice.ScsiTopology.Adapter | where {$_.} Adapter - eq $hba. Key}). Goal
$luns = get-ScsiLun - Hba $hba - LunType "disk" - ErrorAction SilentlyContinue
$nrPaths = ($target | % {$_.}) Lun.Count} | Measure - Object - sum). Sum
$props [ordered] = @ {}
VMHost = $esx.name
HBA = $hba. Name
Target = $target. County
Device = $luns. County
Path = $nrPaths
}
New-object PSObject-property $props
}
}
-
Update / fixes ESXi single host with VCSA running on it.
We have just updated since the free version of ESXi 5 by ordering the Kit of Essentials. In the process, of course, we were able to deploy vCenter Update Manager (which has been the main motivation, like patching manually the free version seemed to be quite a pain). We have a Windows host that has installed the Update Manager, and we have a VCSA running on the single instance of ESXi, we deployed to date. We were able to install the plugin on the viClient and scan the ESXi host for patches with success (a need a good number). But, we're stuck trying to install the patches... us when trying to restore the host, we get: "the operation is not supported on the selected inventory items. Check events for the objects selected for the operation.
The host says:
The 10.0.1.80 host has a virtual VMware vCenter machine
Device server with VMware vSphere update
Manager or VMware vCenter Server installed. The
Virtual MACHINE needs to be moved to another host for the
consolidation to proceed.
error
28/08/2014-16:21:32
Clean up the entity
10.0.1.80
root
Looking at this logic, for the host switch to maintenance mode, the VCSA should have been suspended (apparently, actually moved), which would avoid in turn patches / updates to the deployment. Am I correct in thinking, that we have a second host and networked storage? Made a Kit Essentials / license provide for the possibility of vMotion from one host to another? It wasn't really clear... Yes, the web site says "vMotion" is included in most Essentials, but find it me hard to imagine any point to a facility in ESXi stream without the ability to vMotion between one system and another guest...
Welcome to the community,
And since you have only an ESXi host and your vCSA is running on this host, you cannot patch this host with Update Manager for reason that already know you: the host should be the maintenance mode.
Add about another host, with Kit Essentials without vMotion functionality, you can try using a data store of shared storage between two hosts, stop the vCSA on first host and switch the vCSA on the second host... and finally the first host patch.
-
VMotion between 2 Hosts with different processors
Hallo,
I have a server in my homelab I use for studies of VMsphere and I want to get a second machine to test advanced features such as HA, Vmotion etc.
My first server has a map of X9SCM-9 with processor Xeon E3-1230V2 (Ivy Bridge). I am currently running ESX 5.0 U2 on it.
I was counting on obtaining of material quality for the second host consumers because I don't want to spend a lot on it, so I thought that I need any CPU generation Ivy Bridge.
I tested today with a second machine with a Pentium G2020 Ivy Bridge, but when I try to Vmotion he says "the virtual machine requires physical features that are not available or disabled on the host... ».
So I figure there must be a difference in architecture regardless of the CPU beeing an Ivy Bridge CPU.
When I try to activate CVS it just me are going to the 'Nehalem' Version so my virtual machines running on host 1 would not be able to use all the features of the CPU since the Xeon.
So the question boils down to: what is the processor less which offer compatibility VCA L5?
Or is there something else to consider in VMotion between two hosts with different processors?
I got a shared storage, etc. of the same network configuration.
Thank you
Benjamin
Hi Benjamin,
For compatibility VCA L5 want to look at one of the following models, Intel CPU:
- Ivy Bridge: Series E3-1200-v2
- HASWELL
I would recommend mental health that before rushing and a CPU purchase, check if a cheaper option would be, as Jon mentions in suppresss some fo the CPU compatibility checks so obviously, this is not desirable in a production environment, and must be applied in your study of VMware Lab to the home address.
Hope this helps,
Simon
TechHead
-
Stop reboot request when fast vMotioning to a host with a different processor
I need help to find a better way to deal with a prompt to reboot my users get due to a vDesktop in model (Dell 710) host vMotioned to another (Dell 720). The difference between the two is the processor models. The 710 is a Xeon X 5670 and the 720 is a Xeon E5-2667. The two processors use the same .inf (cpu.inf) file and apparently the drivers. Simply, it triggers the installation process of the material causing the Plug and Play Manager to require a restart of the operating system after the installation. The result, I'm wanting just needs that this reboot window displays don't not weither would it by slaughtering the hardware installation process, hide the window of dialogue itself, or any other possible way to configure the system which does not show users. I've confirmed that you don't have to restart the machine remain operational. Here is some additional information on the operating system and all.
Windows 7 32 bit
1 vCPU
2G of RAM
vSphere 5.0.0 623860
Discover Constable's 5.0.0 481677
Any suggestions or thoughts are greatly appreciated.
Tanner
I encountered the same problem and the only solution I've found so far is to start the master on both hosts. When he started on the two hosts, the message no longer appears when moving the virtual machine back to a host with a different model of CPU. I have two clusters currently, so I have not tested vMotioning fast machine between hosts with different CPU while it is running. When I had the chance to test, I'll post my results.
-Chris
-
Search with drop-down list box
Hello, I am looking to build a Web site for real estate agent and I need to know how I could do a search box with drop-down list according to the image below?
is there a widget for it?
Please, if you know a tutorial for that or something Visual on how to let me know
Here are the options available through widgets in Muse:
http://musewidgets.com/products/data-table
http://musewidgets.com/products/addsearch-button
http://musewidgets.com/products/addsearch-Widget
For a more exact search with custom field values, you can create web app items in case you are using Business Catalyst for hosting your site.
Thank you
Sanjit
-
I'm trying to create a custom connector icf with progressive reconciliation. My recon schedule a task, I have the settings "attribute of Date additional Recon ' and 'last token" that should be used for gradual reconciliation.
How can I get the values of the parameters ' attribute of Date additional Recon ' and 'last token "?
ICF should handle this for you.
The value of "attribute of Date additional Recon ' must be filled in the OperationOption (e.g. executeQuery() and PROCESSES of FilterTranslator has this as a method parameter).
For the "last counter", you need to implement ' createGreaterThanExpression (GreaterThanFilter, filter, is not Boolean) ' in your filter translator class. You can get the attribute of the filter object. Look for a description here: http://docs.oracle.com/cd/E37472_01/apirefs.1112/e28159/oracle/iam/connectors/icfcommon/recon/SearchReconTask.html
Maybe you are looking for
-
Updated Mac Mini to Sierra - no sound
After update to Sierra my sound doesn't work internal speaker or headphones. However, I can send her out to airplay, and the sound from my HDMI. So I know that my sound is not working. I can do the headphones work, when I unplug the HDMI. However,
-
Satellite A300D - need drivers for XP
Hello Please could someone help me with drivers for the Satellite A300D-20th (PSAHCE-01000JCZ)? I installed XP on this laptop as a second system (dualboot - reason some vith vista not compatible older application) and search for the drivers for XP sy
-
Hello - I hope someone can help me pleaseI have desktop PC HP Pavilion 500-300na.The PC worked very well without problem - I went for a stay of two weeks during which the PC was not in use and power was turned off. I'm back from vacation and the PC d
-
Questions about Microsoft products.
If I buy something from the store of Goods of Microsoft in Europe, what taxes will be applied to it and free shipping? Thank you
-
Error code: 8024200d (could not install KB970430)
Update KB970430 gives 8024200d error code I tried several times to update, but it fails