'Operation Timed Out' when cloning a VM

Similar Questions

• Get error 118 (net::ERR_CONNECTION_TIMED_OUT): the operation timed out when opening applications on Facebook

  I need help for my this error error 118 (net::ERR_CONNECTION_TIMED_OUT): the operation timed out

  It's my app from facebook

  Hi Muhammadarif,

  1. the problem occurs only in facebook?
  2. what web browser do you use?

  This is a known error in Google chrome. If you are using Google chrome then I suggest you post in the forums of Google chrome.
  http://productforums.Google.com/d/Forum/chrome

  If the problem only occurs in facebook, then I suggest you to contact facebook support.
  http://www.Facebook.com/help/

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Game get unresponsive, a communication error has occurred: Operation Timed out

  A communication error has occurred: "Operation timed out".

  The Web server may be down, too busy or other problems preventing him from answering. You can try again at a later date.

  For assistance, contact your network support team. That's what I get when I try to access a game I play. Worked fine when I stopped last night, but all day was like that, everything is fine.

  Hello

  ·          Game in which you try to read?

  ·          You play this game online?

  I would say also, please contact game support to check their end technical issues.

• vSphere high availability 'Élection' fails at 99% 'operation timed out' to 1 of the 2 hosts

  Hello

  We had a system with 1 host ESXi 5.1 with local disks.

  Now, we install redundancy by adding a 5.5 U2 ESXi host and a device of vCenter 5.5.

  After having installed and any addition to vcenter, we went the ESXi 5.1 to 5.5 U2 ESXi. The SAN works correctly (vMotion works on the own NETWORK card).

  Now, if I try to activate the high availability, both servers will install the HA Agent and start "Election".

  All the warehouses of data (4) on the SAN are chosen for the HA heartbeat, response of isolation is "keep it turned on" by default.

  A server will always be this process done, and the other will keep "elect" until it reaches 100% and errors on the operation "election timed out.

  I've seen this problem on both servers, so I think that the 'master' elected does not have the problem, only the "slave".

  I have checked these items and executed, but not worked:

  VMware KB: Reconfiguration HA (FDM) on a cluster fails with the error: operation timed out

  -The services were running

  VMware KB: Configuration HA in VMware vCenter Server 5.x does not work, error: Operation Timed out

  -All the MTU has been set at 1500

  VMware KB: VMware High Availability Configuration fails with the error: unable to complete the configuration of the ag of HA...

  -the default gateway is not the same on the two hosts, but I fixed that. There is no itinerary changes. HA the setting is "leave power." After correction and deactivation/reactivation HA, the problem is always the same.

  VMware KB: Check and reinstall the correct version of the VMware vCenter Server agents

  -J' ran "Reinstall ESX host management agents and HA on ESXi" agent of HA, and I checked that it was uninstalled and reinstalled during the reactivation of HA.

  CP /opt/vmware/uninstallers/VMware-fdm-uninstall.sh/tmp
  chmod + x /tmp/VMware-fdm-uninstall.sh
  /tmp/vmware-FDM-uninstall.sh

  I did this for two guests. This fix makes the problem of the election and I was still able to run a HA test successfully, but when after this test, I turned off the 2nd Server (in order to test the PA in the other direction), HA has no failover to 1 and everything remained low. After pressing 'reconfigure HA', the problem of the election appeared again on 1 hosts.

  Here are a few extractions of newspapers:

  -L' availability vSphere HA of that host State became election info 29/11/2014 22:03 192.27.224.138

  -vSphere HA agent is healthy info 29/11/2014 22:02:56 192.27.224.138

  -L' availability vSphere HA of that host State became Master info 29/11/2014 22:02:56 192.27.224.138

  -L' availability vSphere HA of that host State became election info 29/11/2014 22:01:26 192.27.224.138

  -vSphere HA agent is healthy info 29/11/2014 22:01:22 192.27.224.138

  -L' availability vSphere HA of that host State became Master info 29/11/2014 22:01:22 192.27.224.138

  -L' availability vSphere HA of that host State became election info 29/11/2014 22:03:02 192.27.224.139

  -Message "host vSphere HA State" on 192.27.224.139 changes from green to red info 29/11/2014 22:02:58 192.27.224.139

  officer of HA - vSphere for this host has an error: vSphere HA agent may not be properly installed or configured WARNING 29/11/2014 22:02:58 192.27.224.139

  -L' availability vSphere HA of that host State became info error of initialization of 29/11/2014 22:02:58 192.27.224.139

  -L' availability vSphere HA of that host State became election info 29/11/2014 22:00:52 192.27.224.139

  -DSMD3400DG2VD2 data store is selected for the storage heartbeat controlled by the HA agent vSphere on this info host 29/11/2014 22:00:49 192.27.224.139

  -DSMD3400DG2VD1 data store is selected for the storage heartbeat controlled by the HA agent vSphere on this info host 29/11/2014 22:00:49 192.27.224.139

  -Firewall configuration has changed. 'Enable' to rule the fdm value successful.  29/11/2014 info 22:00:45 192.27.224.139

  -L' availability vSphere HA of that host State became not initialized info 29/11/2014 22:00:40 reconfigures vSphere HA 192.27.224.139 root host

  -vSphere HA agent on this host is disabled info 29/11/2014 22:00:40 reconfigures vSphere HA 192.27.224.139 root

  -Reconfigure HA vSphere host 192.27.224.139 operation has timed out.     root of HOSTSERVER01 29/11/2014 22:00:31 29/11/2014 22:00:31 29/11/2014 22:02:51

  -Configuration of vSphere HA 192.27.224.139 operation has timed out.     System HOSTSERVER01 29/11/2014 21:56:42 29/11/2014 21:56:42 29/11/2014 21:58:55

  Can someone give me please with help here?

  Or the extra things that I can check or provide?

  I'm currenty running options.

  Best regards

  Joris

  P.S. I had problems with cold Migration during the implementation of the SAN. After setting up all (vMotion, ESX upgrade), these problems have disappeared.

  When you search for this error, I came to this article: KB VMware: VMware vCenter Server displays the error message: unable to connect to the host

  And this cause could make sense, since the server vCenter changed and IP addressing has been changed during the implementation.

  However, in the file vpxa.cfg, the < hostip > and < serverip > is correct (verified by using https://< hostip > / home).

  Tried this again today, no problem at all.
  

  P.P.S. I have set up several of these systems from scratch in the past without problem (if it is an 'upgrade').

  OK, so the problem is solved.

  I contacted Dell Pro Support (OEM offering the license) and they checked the logs (fdm.log) and found that the default IP gateway could not be reached.

  The default gateway is the ip address by default host isolation, used by HA.

  Because it is an isolated production system, the front door provided proved only for future purposes.

  Now, I've changed the default gateway address of management on the switch plugged into both hosts, namely the ping requests.

  This solved any problem.

• 'Operation timed out', while protecting a virtual machine

  When you try to configure protection on a virtual machine in 4.1 SRM and every time I do it fails with the error 'Operation timed out' and I see the following error message in the log of Site Recovery Manager:

  2010-09-21 14:07:29.502 04584 verbose "PropertyProvider" ASSIGN RecordOp: info.error, com.vmware.vcDr.ReplicationGroup.AddVmTask - 153

  2010-09-21 14:07:29.502 04584 'com.vmware.vcDr.ReplicationGroup.AddVmTask - Task' verbose Error value {(vim.fault.Timedout)

  dynamicType = & lt; unset & gt;

  faultCause = (vmodl. NULL in MethodFault),

  MSG = ""

  }

  2010-09-21 14:07:29.502 04584 verbose "PropertyProvider" ASSIGN RecordOp: info.completeTime, com.vmware.vcDr.ReplicationGroup.AddVmTask - 153

  2010-09-21 14:07:29.502 04584 info 'com.vmware.vcDr.ReplicationGroup.AddVmTask - Task' State of the error value

  2010-09-21 14:07:29.502 04584 verbose "PropertyProvider" ASSIGN RecordOp: info.state, com.vmware.vcDr.ReplicationGroup.AddVmTask - 153

  2010-09-21 14:07:29.502 04584 verbose "PropertyProvider" RecordOp REMOVE: addVmsTaskList, group-4425'

  Someone at - it no indication on what this alarm tells me and how to fix?

  Thank you.

  V.

  I saw this problem after repairing the installation of SRM. Restart both servers SRM has solved the problem.

  In your case, this is the new installation or did you 'fix' recently?

• ESX Server timed out when I try to enter the license server in the CR

  Hi all

  I have a problem with the addition of two new ESX servers in our virtual Center.

  Let me give you a brief overview:

  We have 5 servers ESX and virtual Center Server.

  All servers are in a single Cluster (Cluster 01)

  Now, we want to use Virtual Desktop Infrastructure and for this reason, we bought another 2 servers (blades).

  I installed from scratch with ESX 3.5 Update 4.

  I did a second Cluster in our VC (Group 02) and add the two.

  I configured the network settings and storage, everything went very well, shoot when I want to point to our license server, whenever I get an error message from our VC. Operation timed out and my settings when not accepted. No matter if I get the IP address or FULL domain name. BUT I can ping our server to ESX Server licenses, so I'm not sure if this is some sort of DNS issue or not.

  Another note: our first 5 ESX servers where ESX Server Standard license.

  Our new ESX servers where an ESX Server VDI license. I used the CD to install ESX normal, because I have not found any VDI install special files.

  I see all licenses in the Administration view in our VC, so I think our license file is not corrupted.

  Things I've done so far:

  Renewal of license, start stop server, esx Server license installed twice from scratch

  I have no more ideas, I hope someone could help me with this problem.

  According to your image, you have 0 agent licenses virtual centre-left to allocate to new hosts.  What might happen, is that the agent is not properly installed on the new servers.  Connect to ESX servers.  Make sure that you can test the virtual Center by domain name server FULL and hostname, not only by intellectual property.  From your RESUME, ping your esx server fqdn and the host name.

  Also, check the file/etc/hosts on your esx server and make sure that the entries are tiny.

  -KjB

  VMware vExpert

• Mainenance mode - operation times out when VMs powered - HA question?

  Hello

  I want to update our two guests to esx server 3.5 with Manager running on vCenter 2.5 update. (Mamaged through the Infrastructure Client 2.5)

  On the two hosts vm is turned on. When I start sanitation on the single host an error occurs (operation timed out). When I set up the answer for the failure to "Power Off and try again" the powers of the host in the broad all VMs and update work.

  My question is: shouldn't the host use HA to turn off the virtual machine, move them to another host and turn it on again? Or vMotion is required for this operation?

  I forgot to ask you one thing, you play with setting HA? (Leave the machine market, stop, stop). This could be a different result!

  Should move the virtual machine automatically with vMotion & DRS

  System engineer

  Zen Systems Sdn Bhd

  Malaysia

  www.no-x.org

• Operation Timed out - vSphere API

  Hello

  This follows the validation of my colleague Tony Gent on Snap Mount LUNs will.

  I've coded successfully a routine to call queryunresolvedVmfsvolumes in a few test environments and to manipulate the result for the host will, but critical on-site routine returns with a message 'operation timed' out after 100 seconds.  I tried the navigation to the CROWD and call the method and does not return the expected results but takes a little less than 4 minutes.  I don't see the value of operating time is configurable anywhere and the method has no parameters and is not the task.  I looked at the box VC that I sign too and also the host I use the method on.

  Does anyone know if the value of timeout is configurable (I think I'm screwed, if it isn't!)

  see you soon

  MikeL

  The problem is that cmdlet Get-View creates a new instance of VimService as parameter values of Id are not owned by the customer.

  But if you change $view_object. Property of Client.VimService.Timeout and immediately after that call the $view_object method, that works too long, it should work.

  That is to say:

  ...
  $hostview = Get-VMHost myHost | Get-View
  $dsmanager = Get-View $hostview.ConfigManager.DatastoreSystem
  
  $dsmanager.Client.VimService.Timeout = -1  # Infinite timeout
  $dsmanager.QueryUnresolvedVmfsVolumes()
  

  / Yasen

• Get VPN client to connect, but request timed out when ping

  Hi, I use the router Cisco 837 as my VPN server. I am connected using Cisco VPN Client Version 5. But when I ping the ip of the router, I have request timed out. Here is my configuration:

  Building configuration... Current configuration : 3704 bytes ! version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname michael ! boot-start-marker boot-end-marker ! memory-size iomem 5 no logging console enable secret 5 $1$pZLW$9RZ8afI8QdGRq0ssaEJVu0 ! aaa new-model ! ! aaa authentication login default local aaa authentication login sdm_vpn_xauth_ml_1 local aaa authorization exec default local aaa authorization network sdm_vpn_group_ml_1 local ! aaa session-id common ! resource policy ! ip subnet-zero no ip dhcp use vrf connected ip dhcp excluded-address 192.168.1.1 ! ip dhcp pool michael    network 192.168.1.0 255.255.255.0    default-router 192.168.1.1    dns-server 202.134.0.155 ! ip dhcp pool excluded-address    host 192.168.1.4 255.255.255.0    hardware-address 01c8.d719.957a.b9 ! ! ip cef ip name-server 202.134.0.155 ip name-server 203.130.193.74 vpdn enable ! ! ! ! username michael privilege 15 secret 5 $1$ZJQu$KDigCvYWKkzuzdYHBEY7f. username danny privilege 10 secret 5 $1$BDs.$Ez0u9wY7ywiBzVd1ECX0N/ ! ! ! crypto isakmp policy 1 encr 3des authentication pre-share group 2 crypto isakmp xauth timeout 15 ! crypto isakmp client configuration group michaelvpn key vpnpassword pool SDM_POOL_1 acl 199 netmask 255.255.255.0 ! ! crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac ! crypto dynamic-map SDM_DYNMAP_1 1 set transform-set ESP-3DES-SHA ! ! crypto map SDM_CMAP_1 client authentication list sdm_vpn_xauth_ml_1 crypto map SDM_CMAP_1 isakmp authorization list sdm_vpn_group_ml_1 crypto map SDM_CMAP_1 client configuration address respond crypto map SDM_CMAP_1 65535 ipsec-isakmp dynamic SDM_DYNMAP_1 ! ! ! interface Ethernet0 description $FW_INSIDE$ ip address 192.168.1.1 255.255.255.0 ip nat inside ip virtual-reassembly ip tcp adjust-mss 1452 hold-queue 100 out ! interface Ethernet2 no ip address shutdown hold-queue 100 out ! interface ATM0 no ip address no atm ilmi-keepalive dsl operating-mode auto pvc 0/35   pppoe-client dial-pool-number 1 ! ! interface FastEthernet1 duplex auto speed auto ! interface FastEthernet2 duplex auto speed auto ! interface FastEthernet3 duplex auto speed auto ! interface FastEthernet4 duplex auto speed auto ! interface Virtual-PPP1 no ip address ! interface Dialer1 description $FW_OUTSIDE$ mtu 1492 ip address negotiated ip nat outside ip virtual-reassembly encapsulation ppp dialer pool 1 ppp chap hostname ispusername ppp chap password 0 isppassword ppp pap sent-username ispusername password 0 isppassword crypto map SDM_CMAP_1 ! ip local pool SDM_POOL_1 192.168.2.1 192.168.2.5 ip classless ip route 0.0.0.0 0.0.0.0 Dialer1 ip http server no ip http secure-server ! ip nat inside source static udp 192.168.1.0 1723 interface Dialer1 1723 ip nat inside source static tcp 192.168.1.4 21 interface Dialer1 21 ip nat inside source route-map SDM_RMAP_1 interface Dialer1 overload ! access-list 1 remark SDM_ACL Category=16 access-list 1 permit 192.0.0.0 0.255.255.255 access-list 102 remark SDM_ACL Category=2 access-list 102 deny   ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255 access-list 102 permit ip 192.168.1.0 0.0.0.255 any access-list 199 permit ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255 route-map SDM_RMAP_1 permit 1 match ip address 102 ! ! control-plane ! banner motd ^C Authorized Access Only UNAUTHORIZED ACCESS TO THIS DEVICE IS PROHIBITED You must have explicit permission to access this device. All activities performed on this device are logged. Any violations of access policy will result in disciplinary action. ^C ! line con 0 no modem enable line aux 0 line vty 0 4 ! scheduler max-task-time 5000 end
  
  Thank you, anny help will be appreciated.
  			 
  Hi Michael,
  I have been through the newspapers, they are not conclusive and only detrmine that Phase 1 is coming. However according to this error message % SYS-2-BADSHARE: Bad refcount in pak_enqueue, ptr = 81B50AD8, count = 0 we are hiiting a bug on ios. The id of the bug is CSCsl24693 and the solution is to switch to 12.4 (11) XJ.
  Can you re-execute him debugs and send me the detailed results.
  Kind regards
  Aman
  		   

• Host does not switch into maintenance - Operation Timed Out mode

  Hey all.

  I'm putting one of my hosts in the mode of maintenance and get an 'Operation Timed' error Out. All virtual machines have been moved outside the host so I know that's not a problem "CD in the drive.

  I tried to do this in VC and the command line using vimsh - n EI/hostsvc/maintenance_mode_enter

  When I run the command line, here is the result:

  # vimsh-e - n/hostsvc/maintenance_mode_enter

  File not found.

  -2008-12-13 16:16:35.872 'App' 3076444288 info] current working directory: / usr/lib/vmware/hostd

  -2008-12-13 16:16:35.874 'BaseLibs' 3076444288 info] HOSTINFO: see Intel CPU, numCoresPerCPU 4, numThreadsPerCore 1.

  -2008-12-13 16:16:35.875 'BaseLibs' 3076444288 info] HOSTINFO: hyperthreading disabled, setting the number of threads by heart at 1.

  -2008-12-13 16:16:35.876 'BaseLibs' 3076444288 info] HOSTINFO: this machine has 2 physical processors and 8 cores total 8 logical processors.

  -2008-12-13 16:16:35.877 'BaseLibs' 3076444288 info] use system libcrypto, version 90709F

  -2008-12-13 16:16:35.878 info 'App' 3076444288] Vmacore::InitSSL: doVersionCheck = true, handshakeTimeoutUs = 120000000

  [- 2008-12-13 16:16:35.905 'BaseLibs' 13552560 attention] - Vmdb_Unset] unknown path: /vmomi/

  ' vim. task: haTask-ha-host - vim.HostSystem.enterMaintenanceMode - 198307'

  Something tells me that the "file not found" is not a good thing. If you can think of to try please let me know.

  TIA

  Post edited by: kac2

  I changed the first [to one - for purposes of formatting

  Unfortunately, this happens from time to time.  The work around is simply restart the host as it is, and then maintenance.

• Operation timed out. Cancellation...

  I've had this problem now for 3 versions of DW, more recently, with CS5.5x

  I have changed the settings and increased the Prefs/Site: FTP timeout to 180 seconds. (Verified) 180 seconds via FTP transfer options.

  I use:

  • FTP over SSL/TLS (explicit encryption);
  • port 2121 (on the advice of the host);
  • Authentication (none) - could not get a connection.
  • Passive FTP mode
  • FTP performance optimization is checked.

  I use DW CS5.5 [11.5 construct 5344] on a Mac running 10.6.8.

  I am able to download successfully via FTP, using the FTP Transmit (v 4.1.6) program, so there is something in DW himself that causes this problem.

  Any ideas out there?  I'm going crazy!  My host is unable to understand the question either, and since all the works in the show, it must be a matter of DW.

  Thank you

  Peter

  I am happy to say that my host has been able to solve the problem.

  In case it is beneficial for others, here is their explanation for what was wrong:

  "Our servers use iptables for their firewalls, this is not automatically pick the port assigned to a passive FTP connection when the connection is encrypted." The port range configured on the FTP server for passive mode data channel has not exactly match the range of ports that was explicitly open in the firewall for that purpose, which gives only a 1 in 3 chance to get a passive FTP connection encrypted work. »

• Recompose the vmware view 4.6 error "error:-customization operation timed out."

  Hi all

  In my organization I have deployed automated floating pool. Yesterday, I refreshed two offices of problem which is locked with the service account, we have in the organization. The workstations are still locked with the service account after refresh. So I recomposed the two workstations, but the re-composition not is not finally made. The personalization state is there for around 40mins. After that the status is "error:-operation of personalization exceeded.»

  Please help me on this. Why recompose is not done. It occurs usually within 10 minutes.

  Take a look in the composer-journal on the desktop and vCenter, should give you some clues.

  I suspect the AD account or dns/vSwitch port problems.

  Linjo

• personalization operation timed out VMware View 4.5

  I'm quite new to Vmware view and this is my first time setting up, please bare with me.

  I get the above error when trying to automatically create a related pool.

  I also spent review the previous post that says abot ensuring that:

  • DHCP is enable on the master image
  • VMware view agent is installed
  • VMware tools is installed
  • The firewall is disabled

  The new virtual machines are created and when I connect to Vsphere is to see that they connect to the field, receive IP from the DHCP server. But I don't see their name in my DNS.

  I hope to have provided enough information and you will appreciate any help.

  To the first just nslookup query, and check whether or not the host of clones name is resolved. Also select al virtual machines to see the Administrator page and perform a reset and see<--  if="" both="" these="" actions="" resolve="" your="" issue="" then="" it="" was="" due="" to="" a="" minor="" network="" outage="" happened="" during="" the="" provisioning="">

  Otherwise,.

  1. If the DNS server is a server active directory integrated one or not? If this is not the case, check the permission to register for this DNS server.

  2. the question of whether the DNS entry received from the DHCP server to clone is directed to the right DNS server? and same DNS / domain name cannot be resolved vcenter server?

  3. have you used Sysprep customization? If Yes, be aware that the domain setting is not levied custom specification but DNS settings will be taken from custom spec. In this case the definition given in the spec custom DNS should resolve the field added in vcenter configuration Admin display page

• AMT: operation time out when you try to debug via vs2005 Server Explorer

  using v110621 of ODP.net
  
  I have a valid connection to an oracle 9i DB. If I set a breakpoint in a stored procedure then click right sp in Server Explorer and to "start debugging".
  
  the immeadite window reads: -.
  
  The PL/SQL debugger starts.
  PL/SQL Debugger is listening on the port 49152.
  The database cannot connect to the PL/SQL debugger.
  Ends of PL/SQL debugger
  
  I get the following popup error message
  
  Server Explorer
  
  An error has occurred during execution of the procedure/function:
  ORA-30683: failure connecting to the debugger
  ORA-12535: TNS:operation expired
  ORA-06512: at "SYS." DBMS_DEBUG_JDWP', line 68
  ORA-06512: at line 1
  
  So im not sure what I should be specifying where to the debugger attaches?
  
  found this on the cshays blog, but I still don't understand if its something that I need to define locally or on the server?
  http://cshay.blogspot.com/2006/10/debugging-PLSQL-from-ASPNET-and-Visual.html
  
  Any help is greatly appreciated.
  
  See you soon

  In my case the problem was caused by multiple NICs on my development machine.
  ORA_DBMS_JDWP has been set at ip_address of wireless adapter which was on the other network segment as the oracle server.
  Rotation of the wifi adapter and then restart visual studio solved the problem.

  If you are using vmware workstation that ora_dbms_jdwp can also be assigned to the IP address of the virtual map of vmware.

  Sebastian

• I'm getting "connection timed out" when I try to connect to a specific Web site. I can connect to the site using Internet Explorer. Help?

  As suggested by Firefox, I've cleared my history and cache. Also, I downloaded and run one of the programs malicious applications recommended Firefox. I also deleted Firefox my firewall and then added it back as suggested by Firefox. I have no problem accessing the site using Internet Explorer.

  HTTPS Everywhere makes it easy for you to move site to a secure connection. It's something that you can yourself on the sites where you are displaying sensitive information, so it automates this for you, but I think that it is not essential.

  If you love the comfort, the extension has a function to create your own rules, as described on https://www.eff.org/https-everywhere/rulesets. It sounds a little complicated...