Get events from the host

Similar Questions

• 24 v digital signal of the event from the host to the fpga power on/off

  Hello forums or

  Sheet material

  cRIO-9074

  module or 9472 digital module 24 V output c series

  To expand on the topic described,

  I want to be able send a trigger to alarm the fpga digital 9472 out that lasts 30 seconds using the operating system time real clock time on the host computer

  The way I approached this problem is that

  In the loop where the event occurs, if the event trigger is defined then the fgv has a time stamp when the event occurred is sent.

  In the loop that communicates with the control of fpga, I write to the control based on the condition that the difference of the current time checked and fgv time is 30 seconds or less, then it will send the value true, otherwise send fake and wait for the next occurrence of the event.

  The main problem after implementation of this is that 9472 led does not turn off when the false value is sent to it.

  cordially Mzamanstl

  Timer Keeper SD is a FGV so that it is written for her, once the event occurs

  So if the event occurs so timestamp is stored and then the difference of the timestamp result is<30>

  then a true value will be sent to the module of 9472

  So basically I want the light and I want to do the 24 v output for 30 seconds then turn off and wait for the next occurrence

  I think the method that I test it with is not very good, because I realize other factors that may contribute to this problem, so I think I found another way to test

  and I will try it but its will take time.

  cordially Mzamanstl

• How to get the files to and from the host

  Is there something that I can read which explains how to get the (ftp, memory stick or other) files to and from the host?

  Sorry if this is a noob question, I looked but could not find something specific...

  There are many ways of doing so:

  1 activate not supported ssh and scp use

  2. use VI Client access to your storage space on configuration files and server transfer

  3 configure the iSCSI or NAS to deal directly

• email problem - "mail from the host cannot be found.

  Problem title: original email.

  Why I have problems with my email migration to Windows Mail? I get an error message stating my "mail from the host cannot be found. This has happened on and off for the last 2 weeks. It also affects my laptop. He does not seem to fix his car, then back again. Have you any idea what may be causing this.

  The host (server) mail.btinternet.com is alive and well. It must have been a temporary problem. Let us know if this problem persists.

   

  Gary van, Microsoft MVP (Mail)

  ------------------------------------------------------

   

  "Gerry Pike" wrote in the new message: * e-mail address is removed from the privacy... *

   

  My e-mails light up Windows Internet Explorer. When I open Windows Mail, automatically migrate through and be able to be opened, read and responded to. I did this since I've been using Vista - about 2 years and more. It is strange that he should start suddenly that past not only with my PC, but also my laptop. I did not any changes to settings to one of my computers. The situation does not erase, but he continues to reappear - as the last 2 days! Even my ISP - BT - could not find a solution! The message I get is a follows.

   

  The host 'mail.btinternet.com' is not found. Please check that you have entered the server name correctly.

  Account: 'mail.btinternet.com', server: 'mail.btinternet.com', Protocol: POP3, Port: 110, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0Dppear.

   

  Gary van, Microsoft MVP (Mail)

• Y510 unable to get data from the camera.

  Hello

  I have a Y510 with Windows Vista 32 bit, 3 GB RAM, only 5 weeks. I get this message when I try to use Veriface, "unable to get data from the camera. The camera may have been disconnected or busy. I reinstalled Vista of the State in which the laptop came, but it does not work. I also updated the bios and install other updates were available. I would appreciate any advice.

  Thank you

  Peter

  I wish it was as easy as press Fn + Esc, I looked through an another Y510 our office and managed to find a process that must be set to Auto, the process is KtmRm. This process cannot be disabled, handicapped, or on a time delay, it must be AUTOMATIC.

• I keep getting messages from the center of Action McAfee Anit-virus, Anti-spyware & firewall disabled, as well as Windows Firewall

  It started after a message popped up on Adobe Reader and I deleted it.  I tried to run applications without success.

  Hello

  Welcome to the Microsoft Community and forums thanks for posting the question. According to the description, you get messages from the center of the Action as McAfee and the Windows Firewall is disabled.

  Please answer a few questions to refine the question.

  1. you remember to make changes to the computer before this problem?
  2. you have more of a security software installed?
   
   
  Anti virus definitions update and check the status

   

   
  Method 1: I suggest you to enable and disable the Security Center
  service in Windows 7:
  a. click the Start button, type services.msc and pressenter.
  b. in the list of Services, right click on Security Center, clickingProperties
  and select disabled.
  c. restart your computer.
  d. once again, follow steps a and b, and then select Automatic (delayed start)
  e. start the Service.
   
   
  Method 2: You can uninstall and reinstall the security software and check.
   
  
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 3:

  Restore the system to an earlier point before installing this application.

  
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  System Restore can return your files system to a point in time before you noticed a problem, without affecting documents, photos, or other personal files. If the system restore does not resolve the problem, you can undo the restore operation and choose a different restore point.

  
  More information on:

  
  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

   

  Hope this information helps. Please reply with the status so that we can help you.

• "No 3d support is available from the host"

  Program: Job 12

  Operationg System: windows 7 Professional K service pack1

  Graphics card: GeForce 9600 M GS

  
  I saw the message 'no 3d support is available from the host'

  I don't know this solution.

  I need your help.

  How can I solve this problem?

  You can specify... is your operating system Windows 7, or you are running WIndows 7 in a VM on something else?

  Make sure you have the latest video drivers.

  If you use windows, make sure that hardware acceleration is turned on.

  If you see no problem and everything works, then ignore it.

• currently still have PP CS5.5 &amp; want to install on another office, understand that I can only use one at a time. don't have a CD, can I get information from the current installation and a link to download PP CS5.5?

  currently still have PP CS5.5 & want to install on another office, understand that I can only use one at a time. don't have a CD, can I get information from the current installation and a link to download PP CS5.5?

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  Find your http://helpx.adobe.com/x-productkb/global/find-serial-number.html serial No.

• Store of data deleted from the host, always present in vCenter?

  I had some performance issues with my iSCSI connection on my QNAP SAN, so I decided to go NFS instead. Much better now, but the old store of iSCSI ("store 1") data is still present in vCenter, even though I removed from the host.

  I do not know I did something wrong, but what can I do about it?

  Your virtual machine has snapshots active and/or .iso or .flp mapped images to their readers of disc-CD-ROM CD / floppy drive virtual, that were on the old data store?

  André

• Copy a file in VMware machine from the host (for the guest OS) operating system

  Hello

  I need to migrate data in

  guest operating system of the host OS via

  VMware.

  The client runs as a virtual machine in VMware

  that is run from the host operating system.

  Anyone know of a way to do it?

  Thank you

  Stuart

  smcracraft wrote:

  I need to migrate data in the operating system of the host operating system through VMware.

  The client runs as a virtual machine in VMware that runs from the host operating system.

  Anyone know of a way to do it?

  First VMware is a company not a product and you didn't say what VMware product you use no you said what OS is on the host or the guest then I suggest you read the VMware product documentation that you are using.  In general, if the Virtual Machine works in the same way a physical Machine so you can do the same between the host and guest in dealing with clients as if it were a physical Machine.

  If you have VMware Tools installed in the comments you can also take advantage of VMware shared folders and or the functionality of Drag and Drop on pris supported operating systems.

  BTW take a look on: HOWTO: ask (and answer) Questions

• Getting data from the nodes of event data

  Hi all

  I have a while loop with a Structure of the event and a Structure of case inside. The Structure of the event a lot of cases, and each of them is controlled by a different object (buttons, sliders, graphics, etc.). Sometimes, I have to use data from the nodes of event data to power a Business Structure that works like a State Machine in my code. To clean the block diagram, I want to 'export' data nodes using a single wire event data, but this is not possible because there is a conflict of data, since I get data of CtlRef in one case and Coords in others (for example).

  To resolve this problem, I'm feeding a beam to create a cluster and feed it to the box Structure data. However, the process is so painful, because I have to feed the Bundle function with constants of all sorts of data connected to him.

  Find attached an example. It is not the actual code but shows what I have to do.

  Thank you

  Dan07

  Why you do not pass a Variant to the structure of the case. In your case case simply make a variant of the appropriate data that you want to pass. I guess the case appropriate business structure will be to get called for the event. Given that you need to know the data type this case awaits can use the variant data VI and now you have the data you want.

• Restore the registry from the host.

  Hello

  Recently, I had a new hard drive installed in my Tower for my counter top.  I like to play POGO games and was not able to load some games.  When I called POGO they told me that my 'winregistry home' had disappeared and I needed this registry to load games.  They also said that they could solve the problem for $99.00.  I ask if there is another way to save me this kind of spending, and always to restore the registry.

  Because I know very little about all this, I don't want to get ripped off and to find more late that could have been done online for free.  Can someone at Microsoft explain that and then maybe help me with this problem.  Thank you very much.

  Chief John

  e-mail: * address email is removed from the privacy *

  Hello

  What version of Windows are you using?

  They were talking about the Host file?

  Never touch the file and the fact that he disappeared may be an indication of a virus or malware.  Restart and start typing the F8 key to display the logo of the manufacturer.

  Select Mode safe mode with networking

  Download the following tool and run a scan complete

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  When finished, restart the computer

  Open the Windows program Notepad and find the following information:

  127.0.0.1 localhost

  : 1 localhost

  The '1' in the '127.0.0.1' must be in the first column of the line. In addition, there must be at least one space between "127.0.0.1" and "localhost". The second line is an IPv6 address mapping to localhost, and this line is part of the default for Windows Vista and Windows 7 hosts file. There must be at least one space between ": 1" and "localhost".

  In Windows 2000 or XP, all you have to do to save this file "hosts" and you're done. In Windows Vista or 7, you have launched the program Notepad "as Administrator". This will allow you to record in the "hosts" file and the path when you try to save is a file system type.

  # Copyright (c) 1993-2009 Microsoft Corp.
  #
  # This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
  #
  # This file contains the mappings of IP addresses to host names. Each
  # entry should be kept on an individual line. The IP address must
  # be placed in the first column, followed by the corresponding host name.
  # The IP address and the host name should be separated by at least one
  space #.
  #
  # In addition, comments (such as these) may be inserted on individual
  # lines or following the name of the machine indicated by a symbol "#".
  #
  # For example:
  #
  # 102.54.94.97 rhino.acme.com # source server
  # 38.25.63.10 x.acme.com # x client host

  resolution of name localhost # is handled within DNS itself.
  # 127.0.0.1 localhost
  #: 1 localhost

  Do not add the # in front of the last two items

  Name the file Hosts

  It goes in C:\windows\system32\drivers\etc

• Whenever I open my Windows Mail, get an error 'the host 'Pop3' is not found.

  Everytime I open my Windows Mail I get the following message will appear.

  The host 'Pop3' could not be found, check that you have entered the server name correctly.
  Account: 'Pop3' (1) Pop3 Protocol Pop3 110, secure (SSL) server no socket error 1101, wrong number Ox800cccod,
  I am able to use windows Mail without problems apart from this guard popping up which is very annoying
  
  I have no idea how to do to stop what is happening
  
  I'll be very grateful if someone can help me with this problem
  
  Thank you
  
  Tony
  * original title - how to stop can't find the waiter to come to the top *.

  Go to tools | Options and uncheck the option to send and receive at startup.  See if that takes care of the problem.  He might try to receive before its ready.  Also check your settings under Tools | Accounts and checking accounts are configured correctly.  You can also try compacting and repairing the database to clear up all the weird questions (see www.oehelp.com/WMUtil/) and look out for interference of program part 3 (see www.oehelp.com/OETips.aspx#3).

  Steve

• How to make that guest OS is separated from the host

  Have Win7 (16 GB of ram, 1 TB HD space) is a part of a Small Business Server 2011 domain.  I have a problem with the SBServer and want to look at a new facility to see certain folders permissions have by default. (user redirection folders does not, even if I set permissions per technet article).  Network is 192.168.1.x, can I install a Small business Server 2011 guest (that would be a trial of MS download) and make sure that it is completely separated from the win7 Host and, of course, the field. Then create one or two comments more OS on this same machine win7 and have these comments of BONES join Small Business Server customers?  If so, how do I set that up?

  Thank you, Steve

  Yes it's doable... read the documentation!   Setting up an isolated test with virtual network configuration is no different, so do it with a physical network.  In particular read Chapter 7 "Configuring network connections" in getting started with VMware Player (PDF).

• Import my own device from the host data store

  This is my first post so Hello all who read this.

  I am currently runing ESX 3.5i directly on the hardware of a test done home server (tests, the fonstionality before rolling it into production) here is my problem

  I could create and install an a virtual machine (windows 2K 3 R2 server) and once all the basic configuration were made I exported the virtual machine as a unit. now, the comand export will only export file on the computer of gest. I was able to download the 2 files (hard and .ovf) on the host's data center. Now, I would like to deploy a new instance of the VM on the server. But when I drop & gt; virtual appliance & gt; I have only the option import from the hard drive of gest. I want to do it directly from the data store, so I did not download the file whenever I ride on a new virtual machine.

  Just a note I will administer the trought host VPN exclusively in production so it'll take fo never download the entire server every time.

  I hope that I was clear enough, if not feel free to ask questions.

  Thank you!

  Edit: spelling mistake little

  Hello

  So if I get this right I would create a virtual (windows XP for example) machine i would be VPN on this machine open a remote destop window there and then open the VMware console in this environment and then use it to make my new server deployment. Did I get it all?

  That is right. The reason is mainly the latency. You will not have much and if the VPN interrupts the action you take also WITHOUT giving up and continue until you reconnect.

  Can you tell me if there is a more easier way to do it?

  It's the simplest way.

  Best regards

  Edward L. Haletky

  VMware communities user moderator

  ====

  Author of the book "VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.»

  Blue gears and SearchVMware Pro Articles: http://www.astroarch.com/wiki/index.php/Blog_Roll

  Security Virtualization top of page links: http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links