Get the status of the USB

Similar Questions

• How to get the USB device in the list in the resource name field VISA VISA Open VI

  I followed the tutorial below to connect with my camera using the USB port. But I don't have the name of the USB port able & Automation Explorer list devices. How to get it? Can anyone suggest something?

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4478

  Hi kimhyun,

  I tried this. But managed. I used the USB as my sugesstion to device.my USB is that you unplug your device at any point of your work. Check that the device is properly connected. IF your system has recognized your device, you can view the device in Control Panel > Device Manager > then open your particular device from the list of the connected device then details > description of the system > hardware ID > then you can find here the code from your provider.

  Try this. I think that your device is connected to loosen. What USB device you are using? Also, you must install THE DRIVER FOR YOUR USB DEVICE.

  Good luck

• Cannot get the USB to work HP G6-2278dx

  My girlfriend just bought the HP 2278dx g6 with pre-installed Windows 8. Unfortunately, she's not worried about her and is pretty set on Windows 7. So I bought his windows 7 Ultimate and installed on his computer. I downloaded and installed all the drivers I could find, but I can't the usb on the left side of the computer at work. In Device Manager"also of shows me some other stuff that does not work (I would like to list, but she of not here right now and has the computer with it and won't return until Wednesday)

  I thought it would be a chipset or something I need to download, but NOWHERE on the internet find a chipset for the HP g6-2278dx win7 64-bit. Sort could someone help me? (btw, the only usb that works is on the right side next to the power input charger.)

  I just installed Win 7 Ultimate 64 bit version on my G6-2278dx. For me to get my USB 3 ports to work, I installed the drivers for the AMD chipset from this page.

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

  I believe that the network card is the 8168 8169. I don't remember the hand. You would like the Win7 and WinServer 2008 R2 driver (Version 7.065) I'm not on my laptop, so I'm out of memory which is not always good. Wireless network card works since the drivers used by Windows 7 if I remember correctly, because that's what I used to download all the drivers I needed for the other stuff.

  I'll have to check which driver I used for wired LAN port, but you can get them from Realtek on these two pages.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  and or

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• "Please insert the disk" drama, but he had to get the USB files

  Hello
  I tried to do some homework and generally save them on my USB disk of 4 GB, up to our days, the car worked well (even when the phone fell off my bed and the USB it folded kind of last night). I went to school and used without any problems at all until a class when I logged on a computer and it told me that the message "insert a disk in the drive removable (E)", I had not thought much of it because the pc to school can be quite slow at times. Went home and have encountered the same problem, had not actually saved a good copy on my laptop so there is mistake no. 1. So I googled the problem found some solutions and none have worked so far, I can understand that it works perhaps not properly because it folds (but could be fixed / back into place, the damage wasn't bad at all).
  Is there anyway that I can my laptop to read the USB so I can extract the files it contains, if I can actually do my homework?
  I'd appreciate any help at all because this assignment due tomorrow and even if it is a heavy task to write again I really want to solve the problem,
  Thank you.

  Your USB may have been permanently damaged.

  Try this program to extract the assignment thereof:

  http://www.SnapFiles.com/get/Recuva.html

  Recuva is a file undeletion tool that allows you to analyze your hard drives or media cards for files that have been deleted or formatted. It presents you a list of files that have been found, as well as an assessment of their potential for recovery, a preview option, and a hex viewer to inspect the content. You can limit your search to files of a certain type (e.g. images, audio etc.) and choose between a quick and a thorough analysis approach. The program also includes a secure deletion option that allows you to permanently delete files that were found while parsing, to avoid any future recoveries.

  See you soon.

  Mick Murphy - Microsoft partner

• Impossible to get the USB flash drive to work

  I have a new Satellite L500 with Windows 7 and it will not recognize/install the USB flash drives. A msg comes up saying "software device driver has been properly installed. I tried several flash drives - they are OK & work on other machines - including an another Toshiba running Windows 7.

  Other devices work in the USB ports, so the ports are OK.
  Windows cannot resolve the problem, I have checked all USB drivers are updated in Device Manager & made a system of analysis of file without success.
  The Bank recommended a reload & restore factory default - other options?

  Have you installed driver chipset?
  Your laptop comes with Vista or Win7?

  You have just upgraded to Vista or Win7 clean setting?

• How can I get the USB Audio device in option audio device for Windows XP?

  USB Audio will not appear as an option. However, the Audio USB headset is an option. Help. Thank you

  Hi VincentMr,

  ·         What is the brand and model of the USB audio device?

  You may need to install the device drivers on the device manufacturing site, or else you must have received the CD of the software with the device.

  See the following article for more information on the update of drivers:

   

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Let us know the results.

• Cannot get the USB port to work after re-installation of SP2 on Satellite Pro L20

  After re - install XP Home SP2 and download all updates & drivers from here, I can't get my USB port works correctly, if I have more than one connected device it says "bandwidth exceeded".

  I have a Behringer BCD2000 which is a souncard/midi controller for DJ, mixer, he has worked before I reinstalled windows, now that it snaps and POPs playing tunes, ASIO does not work when I start Traktor (Dj software) and the program crashes. Any other external sound card does not work. I've been through the Device Manager, no conflicts outside! during the series under the devices hidden.

  I am lost, my only option, buying a card PCMCIA sound card, it worked fine before as surely as it is a software solution for this?

  If anyone can help I would be very grateful.

  And what model of laptop you have exactly? As far as I know Toshiba has produced many different Satellites in the last ten years.

• How can I get the USB-Quad08 with Dasylab encoder channel data

  Hello

  I'm reading the pulse signal of USB-Quad08 with Dasylab V10, but every time I got the error message "this Committee has no meter 9513.

  I have configured the jury with Instacal and the test hardware is ok. I used the module 'Entry meter' (Modules--> inputs / outputs--> MCC - DAQ--> Counter Input) to read the signal of the channel meter. "Entry 9513 counter" displayed and I na not change settings. After connecting a graphic recorder module I run the application. The error message appeared.

  I noticed that USB-Quad08 Council has counter 9513. But why the error occurs?  How can I get his channel encoder signal?

  PS. I can get with Dasylab DIO signals, but I can't any signal with TracerDAQ, even I can't find USB-Quad08 in his list of DAQ devices.

  Please contact Measurement Computing.

• Getting the package USB without having to reinstall the Application

  Hello.

  Let's say that one captured an installation of an application and only the Thinapp option. Later we realized that the USB option is more useful. Is it possible to get the USB package without having to reinstall the application and the caturing for USB?

  Best regards

  Yes, just add

  SandboxPath =.

  to the \[BuildOptions\] Package.ini article, then run build.bat again

• Surveillance using the USB Webcam camera

  Normal 0 false false false MicrosoftInternetExplorer4 / * Style Definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman"; mso-ansi-language: #0400; mso-fareast-language: #0400; mso-bidi-language: #0400 ;} "}

  A project I want to do is write a Labview application that would communicate to the Webcam USB and publication of the application in a secure web page, and allowing users to control Labview applications at home, work, and anywhere in the world without having installed on the PC of the Labview software. On the web, users can control the Labview front panel for zoom, annotations, etc. As a surveillance camera the USB Webcam will be detect an object moving, save images when motion was detected, an alarm to alert.

  I was wondering if anyone can help me with this.

  I have Labview Vision and I can get the USB Webcam streaming images.

  I don't know where to find information about the detection of a moving object.

  Can someone help me on this please?

  Hi krispiekream!

  I guess that your USB camera has the ability to zoom through a control programmatically? If not you should be able to control the camera using a remote facades, which require the LabVIEW runtime engine. Here's a tutorial on the remote Front Panel LV development of Applications: http://zone.ni.com/devzone/cda/tut/p/id/3277.

  With respect to the detection of a moving object, you can take two images and subtract to determine if there was movement in the frame.

  I hope this helps!

  Kristen H.

• Cannot access the USB storage

  I had an E3200 for over a year and all is well. I have a 128G USB plugged into the usb port and had no problem sharing the content with any user connected to the router. In the last 2 days I started to have access to the USB problem. When my WIN8.1 came, I saw notification saying: "unable to cnnect to all network drives" and I can't go to the USB. The other function of the router is fine (each user can access the internet without problem). I tried to check using the administration interface. But 192.168.1.1 has not returned the admin login (via IE or Chrome).

  I put off and then power on the router, I can only get to the admin and saw no problem with the USB Stoarage and I was also able to get the USB content on my file Explorer.  It remained OK when I was using my laptop (maybe 1 or 2 hours). But the next time I turn on my laptop, I had the problem once again (impossible to get to the USB drive and 192.168.1,1 are not returns login prompt).  Power off and power on the E3200 will do again. Any suggestions on how I can know what is the problem?

  To help us isolate the situation, try to access your files using other laptops. If all devices are affected, it would be better if check you if the firmware is up to date. If this is the case, you can try to re-flashing the firmware.

  To download the updated instructions and the latest firmware, go to this link, http://support.linksys.com/en-apac/support/routers/E3200.

  It is recommended to do a factory reset after properly updating the firmware. Reconfigure the router and observe its performance.

• Start the USB VM in Vmware 6

  Hello everyone, sorry to bother you to all.

  Searched for an answer to this, I can't seem to find a. I'm trying to start windows server ISO 2012 from a USB connected directly to the host. I set up the usb controller and added the usb device. It is recognized. I'm not trying to get my VM to boot from USB but I can't start it. I tried tinkering with EFI and Bios but can't seem to get the USB to boot at all. Please can someone give me step by step instructions on how to do this? I feel as if I had just missed something simple...

  Thank you very much for your time!

  CTRL Alt Del after connecting the unit! I have it! Thank you!

• Cannot start with the USB on my hp proliant microserver, why?

  Hello!

  I had a few problems to install esxi 5.5 on my hp proliant microserver... USB keyboard, but I solved that by plugging another keyboard, an old labtec keyboard.

  Seems esxi is not compatible with logitech g510... BUT I have another problem. My server does not start with my installation of esxi usb key longer. It was also like that before I changed the keyboard, so this isn't the issue. Server starts fine and then I get the message: "'remove the disc or the media, press any key to restart" "

  It worked fine a few days ago. The usb boot works OK on my Hp workstation...

  I have a windows server 2008R2, installed on the server, but the usb boot worked fine when this OS is installed... So nothing has really changed, he just stopped wanted for a startup with USB... I loaded the default bios setting... IM lost here please help!

  IV ' e OK installed esxi 5.5 via USB stick

  Follow this link to get the usb boot: http://www.tinkertry.com/rufus-takes-2-minutes-to-create-a-bootable-usb-flash-drive-for-esxi-installation/

  Don't know yet why this work, but I'll know!

• get the ' scan status unavailable.

  I hooked up a scanner to a usb port. Sound, but can not scan - it says under scanner status "unavailable". the driver is up to date and works very well. I can just scan?

  Hi Erikw12,

  • Tried to connect to another USB port to check if it works?
  • What is the brand and the model number of the scanner?

  However, you can access the Device Manager and check if there are errors for the scanner device and after return from the error.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  You can also try uninstalling the drivers and scanning software, programs and functionality and Device Manager. Later, download the latest drivers and install. Access the link below and follow the steps to uninstall the drivers and programs to monitor programs and features:

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can also contact the manufacturer support scanning to check if you need to install any other drivers or updates to get the scanner to work.

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I get the status bar on my web page

  I want to get the status bar at the bottom of the web page so that I can slide from left to right, if an article is too large for my monitor. I got it this morning 05/01/15. After Thunderbird as an option for my email, the bar disappeared after uninstalling Thunderbird. I know hovering on the web pages I have on my menu bar, but I'd rather have the bar all at the bottom of the page.

  The gray bar appears in my email only. I would like to have it on all my sites.

  Thank you.

  I guess what you mean in the bar of horizontal scrolling if you want to be able to scroll horizontally.
  Firefox will normally only show the bar if content extends outside the browser window.

  You can have zoomed pages by accident.
  Reset the zoom of page on pages that are causing problems.

  • View > Zoom > reset (Ctrl / command + 0 (zero))
  • http://KB.mozillazine.org/Zoom_text_of_web_pages
  • http://KB.mozillazine.org/browser.Zoom.full
  • http://KB.mozillazine.org/browser.Zoom.siteSpecific