Getting to 'mature' LJ to print with laptop

Similar Questions

• Unable to connect a wireless printer with laptop computer since the reset wireless router

  I have a wireless HP C4580 printer that connects to my Acer Aspire laptop using windows 7. The two have worked together very well for months.  My wireless router stopped working a few days ago, so I had to unplug the device to make it work again is it.  But since then, I can't get my lap top to communicate with the printer now.
  I went all the problem of shooting and insured the printer is on line and set it as default printer. I even did a system restore, as suggested in the troubleshooting
  With the help of the program are the two messages that I get now troubleshooting
  1 that the C4500 series can be contacted via the network (this is the message that I had before the restoration also)
  2 the C4500 series is not shared with the homegroup

  All the tips are greatly appreciated in progressive simple language as possible as I am a bit useless with computers

  I assume that the printer is all first directly connected on the router, then the laptop?  Access the router and make sure that the printer is listed as a "wireless client" connection  If this isn't the case, you should probably restore the wireless "link" between the printer and the router then the printer should work.

• HP envy 5530: HP envy 5530 printer does not print with laptop

  Hi, we have set up a new printer today, it is printing very well with our laptop Mac, tablets & toshiba, however will not be printed on our acres of girls aspire laptop. The laptop is grateful for the printer, the icon is there with a green checkmark on this subject, but when we click on print, it goes into a queue and then to zero. It keeps saying printer is offline, but this isn't? Any help or advice greatly appreciated.

  Maximus11

  Welcome to the Community Forum of HP.

  You could try the following:

  Assuming that you have installed the printer on your daughter's cell phone software previously, then start here, else scroll down...

  • Everything, including the router restarts

  > If it does not (reboot the router), you can try this:

  • Remove Panel printing software > set view icon > programs and features > click with the right button on the program > Uninstall
  • Shut down the computer
  • Stop / power off the printer
  • Turn off the router
  • Wait 2 minutes...
  • Turn on the router and wait for it to start completely - say, 1 minute
  • Start the computer and connect
  • Turn on the printer

  If you have never installed the software of the printer on your daughter's cell phone, then you might start here:

  • Install the full functionality for the printer software by following the instructions

  Install the full software features - like 5530

  ===========================================================================

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  Click on accept as Solution when the answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• How can I get my Konica Minolta 2430 to print with os 10.11.3 on my new mac mini

  How can I get my Konica Minolta 2430 to print with os 10.11.3 on my new mac mini? I have seen several threads form 2013 on 10.9. someone knows something about 10.11.3. I'm a novice, was fiddling with used Mac for several years, but don't want to lose a lot of time to understand. Thanks for any ideas you may have.

  Konica says that the printer is taken in charge by El Capitan?

  Konica has drivers for this printer? If it's an old printer, it is not supported in El Capitan

  Maybe:

  Apple may provide drivers for older printers?

• C6380 - computer laptop xp prints with connection by usb cable but not wireless

  Hello

  I have a c6380, which is about two weeks old. Setup worked fine when I put it on the wireless network and everything is ok.

  I installed the software on a vista pc which is connected by cable to my router from sky. This shows very well.

  I installed the software on a computer vista laptop that is wireless and prints well.

  I also have a computer laptop xp. It is also wireless. The software installed without problem. See the printer etc. However, when I try and print, the printer makes noise and pulls the paper, then the screen says it's printing and then nothing happens. The printer stays like that and eventually the laptop shows a failure to print the message. The document remains in the print queue before deletion, and I have to press Cancel on the printer. If I plug the printer with a usb cable for this laptopit prints without problem.

  I ping the printer wireless froom the laptop xp and access the admin screen. It also shows as a network drive in my computer.

  I uninstalled the software that came with the printer, downloaded the hp software to ensure that it is up-to-date and re installed.

  I put the printer with a static ip address.

  I restarted the router as well.

  The router uses a channel 11 broadcast key, wpa - psk and is set to g & b modes.

  Now, it's really really frustrating because the computer laptop xp my wife, is the main reason why we bought a wirelsss printer because she is a teacher and done loads of printing.

  I'm pretty good with pc / networks etc but have now run out of ideas.

  Can someone help me please?

  Thanks in advance.

  Steve

  Hello

  I've actually solved myself, but I'll keep this post here anyway.

  The answer has been upgraded from SP2 to SP3.

  Probably should have thought about that a little bit earlier!

• my printer will not get the wireless signal and so my laptop can not find print, what should I do?

  How can I make the printer get the wireless signal?

  1 Microsoft do not have printers - so it would not be my first option to ask in the forums to help MS.

  2. we have even less likely to help when you do not tell us what printer, what operating system, what router wi - fi or anything!

  I suggest that you follow the instructions in your printer manual, with operating instructions of your wi - fi router to work things out.  You should connect the printer via a cable to the wireless installation.

  If stuck try the support forums on the Web site of the manufacturer of the printer with the forums on the website of the manufacturer of the router.

• Travel with laptop get IP address conflict notice I'm a learner

  Help I get IP address view conflict on my laptop.

  I'm a learner and travel through the Australia

  IP address conflict occurs when the same IP is used by another computer on the network.
  To avoid this, you must configure your IP address manually.

  • who are going to start-> run-> type "ncpa.cpl" (with quotes)
  • Then you will see a window with all network adapters.
  • Select the adapter (local area wireless, or whatever it is), open it.
  • in the Properties window, double-click Internet version 4 Protocol
  • then in the new pop - up window, either give the IP address manually, or select "obtain an IP automatically" and "Obtain DNS server automatically.

  If you are not sure what IP address you have to give, then contact your internet service provider.

  Thank you!!

• I get a message that says... your version of internet explore is obsolete to run the latest XML parser. I cannot print with my printers. I have a XP SP3, 5 years old. It's time to upgrade to windows 7

  I get a message that says... your version of internet explore is obsolete to run the latest XML parser. I cannot print with my printers. I have a XP SP3, 5 years old. It's time to upgrade to windows 7

  What version of IE are you using?

  The current version is IE8 - http://www.microsoft.com/nz/windows/internet-explorer/default.aspx

  IE9 (is still in beta).

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• How to install the printer with the laptop. Printer was used with another computer.

  I wanted to use a printer with my laptop lexmark. The printer was used with another computer and it worked fine, but when I tried to use it with the laptop, I was not able find the installation disk and tried to install without it. The laptop produces a message indicating he could find the internet facility info if I accepted this. He had apparently fulfilled this function, and I tried to print a document. The document has been printed, but the result was so low, that it was not readable. I then found the installation disk and tried to restart but was confused by the messages and options. I don't have a printer that prints. Help.

  "Mr. jiggs" wrote in message News: * e-mail address is removed from the privacy * .com...

  I wanted to use a printer with my laptop lexmark. The printer was used with another computer and it worked fine, but when I tried to use it with the laptop, I was not able find the installation disk and tried to install without it. The laptop produces a message indicating he could find the internet facility info if I accepted this. He had apparently fulfilled this function, and I tried to print a document. The document has been printed, but the result was so low, that it was not readable. I then found the installation disk and tried to restart but was confused by the messages and options. I don't have a printer that prints. Help.

  Unplug the printer from the laptop.  In Vista or Win 7, click Orb (Start), settings, Control Panel, printers. When the Lexmark printer is found, right-click on it and then click on remove.
   
  Equip your drive and install the drivers and programs on the disk, then when told the printer.  You should have a printer now works.

• why I can't get my keyboard lights turn on my laptop with the botton f5, or what I need to do to make

  Why I can't get my keyboard lights turns on my laptop with the botton f5, or what I have to do to make them.

  Thanks I got it to work thanks again

• printing with I pad & laptop running windows

  How trbl configure photosmart 7520 to serve both?

  Simply configure two products to work with the printer, and then you're all set.

  This document will explain how to set up your iPad with your HP Photosmart 7520 e-all-in-one printer.

  This document will explain how to set up your printer with a Wi - Fi for Windows.

  Hope that helps!

• Printer with windows 8.1 compatibility

  My Bank Web site allows me to view and print images of my canceled checks. When I was running Windows 7 on my LaserJet 1020 has worked very well. But with Windows 8.1 it wouldn't print the images themselves - only two empty boxes and the surrounding text. I then bought a new HP LaserJet Pro P 1102w having been said it was compatible with Windows 8.1. Now, I have exactly the same problem with the new printer. I don't have this problem when I attach my laptop running Windows 7 on the new printer. Everything I print. I short, I don't think that my new printer is fully compatible with Windows 8.1. I could not download "Full solution" to HP. How can I get it on a CD?

  Hi Flyfish66,

  The most likely problem in the browser that you use with Windows 8. It's probably a different version of when you were using Windows 7.

  What browser do you use? AOL?

  Try using a different browser to see if have the same results. (Google Chrome, Firefox, Internet Explorer)

  Using another browser other AOL then, when you download the drivers.

  If you are able to print with the different browser, please contact AOL support for assistance in using this browser.

  Thank you.

• Communication problems scanner Canon MP610 with laptop

  I have a Canon MP610 all in one printer, connected to a Dell laptop connected via a netgear wireless router and a Dell PC.

  The MP610 runs perfectly with the PC, and I am able to print from the laptop, but when I try to scan from the laptop using the program 'Publisher '.

  I get a notice stating "cannot communicate with scanner.

  Hello

  (1) what happens when you connect the scanner to a different USB port?

  (2) is the device-specific question?

  (3) what version of Windows operating system do you use?

  You can try the following methods and check the status of the issue.

  Method 1:

  Try the procedure described below suggested article Canon.

  Error message: "cannot communicate with scanner."

  http://support-SG.Canon-Asia.com/contents/SG/en/8100065300.html

  Method 2:

  Configure the computer to clean start State to check software conflicts.

  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 of the above article.

  You can also post you question under support of Canon for help.

  http://www.USA.Canon.com/Cusa/support/consumer

• HP Officejet Pro 8600 Plus: I'm trying to troubleshoot printer with Windows 10.

  I removed my original pilot, launched my CD orig who downloaded correctly.  When I go to find in my device Mgr it sees and as to continue through the wizard to add to my HP Pavilion he asks that I add the "WPS" I can't find it anywhere in my manual or my printer.  How can I get my WPS so I continue and restore this printer with Windows 10 settings?  Then I should be able to download your drivers 'full foot' and the laptop talk to the printer (at least I hope it's going to happen).  Currently you can only print via USB then please get back to me with an answer as soon as possible.

  Hello

  The CD may be a little old. Please download and install the software and the following driver on your Windows 10 computers (new or updated):

  http://ftp.HP.com/pub/softlib/software12/COL40120/bi-108858-4/OJ8600_1315-1.exe

  Kind regards.

• Trying to print pages of e-mail for printer, get a blank page the printer off

  With the help of Wintdows Vista on computers anHP office and printing to a printer of C3180 HP all-in-one.  When I click on 'print', I get a blank page the printer off.

  When I do the same with my laptop (with Vista) HP, I get the printed page.

  Hi john1019,

  (1) is this problem limited to the pages of e-mail? You are able to print very well other applications?

  (2) how to access your emails?

  First of all, restart your computer once and then test to see if the problem persists

  Step 1: Run the Fixit available in the link below and test

  Troubleshooting printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

   

  If the problem persists,

  Step 2: Let me know if you can print a test page from your desktop

   

  You can print a test page to check if a printer to print graphics and text correctly. A test page also displays information, such as the printer name, model, and version of the software driver that can help you troubleshoot printer problems.

  Follow the steps mentioned in the link below

   

  A test-print page

  http://Windows.Microsoft.com/en-us/Windows-Vista/print-a-test-page

  For more information, see the link below

  Network printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.