GG and ODI for replication

Similar Questions

• Comparison of BPEL and ODI for integrations

  Hi all
  
  We expect the integration of two different versions within oracle applications. We evaluate the component of technology to use (ODI VS. BPEL Oracle Data Integrator).
  
  * There are two types of data that need to be synchronized between these two. A type is reference data (for example - items, suppliers) and the other type is associated processes (purchase orders, orders). Reference data sync-up should not have any intelligence to be built in the process, since it is mainly the loading data. ODI seems to be a better candidate for reference data sync-up
  * Sync-up associated process would require intelligence to be built in the integration process. BPEL seems to be a better candidate to do this. However, this can be achieved even by using ODI since we can execute some PL/SQL APIs or call ODI web services. The required logic can be kept in PL/SQL or web services.
  
  Can you please share your thoughts on the advantages/disadvantages of the use of ODI VS. BPEL (in terms of volume of bass vs a high volume of data and the impact on performance etc.).
  
  Thank you!

  Please refer to this http://www.oracle.com/ocom/groups/public/@ocompublic/documents/webcontent/018850.pdf white paper that describes what type of design model to adopt.

  In general, if the volume is too high, and the performance is very critical, then choose ODI. However if you want to have all the benefits of loosely coupled SOA integration, volume are not that high and there is treatment of activities it takes to arrive before the data makes it to the other side, use PIP of the ABC of the AIA connector architecture.

  Hihg volume is subject to use particular and participants ability to request to be processed many (batch) data.

• We have configured replication vsphere in our environment and when replication is triggered according to the OFR start us below the questions on the virtual machines that are configured for replication

  Question: We have configured replication vsphere in our environment and when replication is triggered according to the OFR start us below the questions on the virtual machines that are configured for replication.

  Version for esxi: Patch 5.1 level 7

  Virtual center of version 5.1

  Source of storage - IBM v7000

  Destination storage - Hitachi

  
  Questions:
  Events of breach RPO
  Consolidation for the VM disk failure
  Delta abandoned events
  Time change events
  NTFS error and warning (event ID: 137, 57)
  RDP disconnect and ping does matter
  Standby error
  Volsnap error
  Stop the server and offline issue
  Install vmtools emits automatically

  well, in this case, we need to disable the standby of the end of the replication.

  So that everything in triggering replication does not trigger the snapshot of the suspension.

  Then test the if you get these errors.

• Cannot save the ACS 5.4 as secondary for replication

  Dear all,

  I am not able to regisrter my ACS in DR 5.4 as secondary to my primary ACS in DC 5.4 for replication.

  Attached is the error I get

  Kind regards

  Ranjit

  Hello

  Enter the IP address of the primary server, not the host name.

  It seems that your DNS has no name, so you have to add the ip address and try.

  HTH

  Amjad

  Rating of useful answers is more useful to say "thank you".

• License FDMEE and ODI

  Hi all

  Please let me know if you have to buy a separate license for ODI with FDMEE or ODI is integrated FDMEE.

  Kind regards

  Hello

  Restricted license ODI for FDMEE comes with the FDMEE license.

  ODI is automatically installed and configured when you install FDMEE.

  Hope says.

• ODI for Hyperion Planning upgrade upgrade

  Dear all,

  I really need your advice. Now we are in the process of Hyperion Planning upgrade 11.1.1.3 11.1.2.2

  We must also modernize ODI. Hyperion Planning and ODI now run on the same machine. And after upgrade HP, it will be even...

  So now we have 2 servers - current HP more ODI and new HP.

  Could you please how to make the process of upgrading of ODI?

  PS: I don't want to touch existing ODI. And I don't want to install the previous version on the new server.

  I'd be happy if it was the way with the new installation of version ODI with migration of repositories for new machine...

  Install a newer version of ODI in the new server. Then take the saving deposits of the ODI and restore them to new db.

  Using the upgrade process, upgrade the ODI, then connect them with newly installed ODI.

  With the help of ODIhome/bin/us.bat, we can improve the ODI version.

  Thank you

  Mady

• How can I start the BI and ODI Managed Servers?

  Well,.

  I read at step 4 of Doc-ID 1589540.1 the following:

  "BI applications requires the BI and the ODI Managed Servers (bi_server1 and odi_server1) should be started via the node Manager. This setting is required for settings, memory, and jvm arguments are correctly defined.

  Starting not not the BI and managed servers of ODI can lead to memory problems and the loss of functionality BI Applications Configuration Manager, the Manager of functional installation and ODI.

  To ensure that the BI and ODI Managed Servers are started through the node Manager, start using the Console of Administration WebLogic user interface.  Do not start the BI and servers managed by ODI by using the managed server start script. »

  Well, as I'm new Weblogic management, then, what are the steps to start all of the services?  (I have OBIEE, ODI and Bi Apps on the same server).

  I mean, was that you should not start their script. What is the proper sequence and how should I do this?

  Could someone help me on this?

  Thanks in advance...

  the appearance of the home screen for environment-> servers-> here you will see the admin and managed servers-> click the tab control and then check off the boxes related to managed servers, and then click start that's all

• Help for replication

  Hi all
  
  We have an existing applications with database on Sql Server. We want to migrate to Oracle 11 GR 2.
  What tools do I need to migrate from SQL Server to Oracle? The size of the database is 200 GB and 150 GB of it are 'images' or 'images '.
  
  
  Help, please...
  
  Thank you very much
  
  zxy
  
  Published by: yxes2013 on 10.3.2013 23:48

  In addition, management wants a parallel race. Since it is a critical application, we can not suddenly convert it in a day or two, but piece by piece.
  We want old system run for like 1 month so that converted new applications is slowly capturing daily transactions of the old system. How to track all new transactions (insert/update) and planned to be updated every hour on the new system?

  You also have the replication of the new system to old.

  For replication in real time from Oracle to MS SQL, you can also use cheaper (than GG) solutions such as DataCurrents.
  For replication from MS SQL to Oracle, you can use MS SQL replication. http://msdn.Microsoft.com/en-us/library/ms151864%28V=SQL.90%29.aspx

• Is not Table-level logging a sine qua non for replication?

  GG version 11.2.1.0.3
  RDBMS Version: 11.2.0.3 (Source and target are the 11.2.0.3 version)
  OS: RHEL 5.4
  
  
  After the first load using expdp, experimental using GoldenGate we are replicating the LMD of 5 tables (Uni-directonal) from the source to the target.
  
  DB level additional logging is enabled in the source.
  

  SQL> select SUPPLEMENTAL_LOG_DATA_MIN from v_$database;
  
  SUPPLEME
  --------
  YES

  We have not activated level table for these tables using the ADD TRANDATA command as
  

  GGSCI > add trandata SCOTT.EMP

  He checked by running

  GGSCI (cbrdf2) 2> info trandata SCOTT.*
  
  
  Logging of supplemental redo log data is disabled for table SCOTT.EMP.
  
  Logging of supplemental redo log data is disabled for table SCOTT.XXX.
  
  .
  .

  But replication works without any problem. Then, is not table-level logging a sine qua non for replication?
  
  Only one of the logging method above is sufficient?

  Database-level logging is minimal logging necessary to capture updates to PK columns. For your INSERTIONS and deletions will get replicated, even if at the level of the array logging is not enabled.
  However, updates of non-PK columns will not be get replicated if the level table record is not enabled.

• OWB and ODI

  Hello
  
  We intend to set up a Datamart in Oracle 11 g. The data source is currently in SQL Server 2005 and excellent files.
  
  My question is - do we use OWB and ODI as our ETL tool?

  You can check the Direction of Oracle statement.

  http://www.Oracle.com/technetwork/middleware/data-integrator/overview/sod-1-134268.PDF

  In my opinion, better to go for ODI.

  Thank you
  Katia

• Integrator ERP Hyperion 11.1.2.1 and ODI

  Hello
  
  We have Setup EMP 11.1.2.1 on a distributed environment
  Machine A - components of the Web (Foundation, HFM, Reporting and analysis, FDQM) layer
  Machine B - Services (Foundation, HFM, Reporting and analysis, FDQM) layer components
  
  Now, I need to have the Integrator ERP talk with Peoplesoft and do it, I would need ODI. So when I try to install ODI 11.1.1.6 b, the weblogic (which is installed in the EMP 11.1.2.1) Machine in the machine B is 10.3.4 and is not compatible with 11.1.1.6(which ODI doit weblogic 10.3.5 ou plus).
  While I raised a SR for the same thing. If any of you have already experienced such a situation, please share your experience and suggestions.
  
  Kind regards
  Leo jose.

  If you want to use J2EE agents or use the console ODI, then you would need weblogic.
  Just use ERPi and ODI so it is not essential, because you could use an autonomous agent.

  I saw WebLogic installed to separate places and they do not create any problem but I can not always guaranteed.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Main difference between OWB and ODI

  Hello
  
  I have a very long search behind me to know the difference between the two, but the thing the most I found was marketing blah blah blah and not core-facts :(
  
  Can someone tell me the main difference between OWB and ODI. Please only facts and no marketing blah blah blah :)
  
  Also, it would be good that you have a reference (link or something else) of your facts for me
  
  I look forward to your replies

  Hello

  Oracle Warehouse Builder VS Oracle Data Integrator

  BR,
  IM

• CalcMgrCmdLineLauncher.cmd and ODI

  Hello!
  
  I use the EPM 11.1.2.1.0 system and ODI 11.1.1.
  
  I work with CalcMgrLineLauncher.cmd for the launch of business rules (created with the calculation Manager) to the command prompt.
  
  When I work with the command prompt (for example, cmd D:\Oracle\Middleware\user_project\epmsystem1\Planning\planning1\CalcMgrCmdLineLauncher.cmd - f: passwordFile /A:planapp /U:admin D:db /R:Alloc), I have been successfully executing business rule and my values are recalculated - I see that in data hyperion planning form.
  
  But my task is: launch of business with ODI rules.
  
  I followed the instructions in the blog of John Goodwin (http://john-goodwin.blogspot.com/2009/07/odi-series-executing-hyperion-business.html with CmdLineLauncher.bat):
  I have create procedure in ODI with command: cmd/d CalcMgrCmdLineLauncher.cmd - f: passwordFile /A:planapp U:admin /D:db R:Alloc.
  Then I run this procedure (the operator of ODI shows the smooth running of the procedure), but the rule does not work (not recalculate values).
  
  John and guru of other hyperion, do I have to change in the CalcMgrLineLauncher.cmd file to get my result?
  
  The structure of CalcMgrLineLauncher.cmd:
  
  off @echo
  SET EPM_PLANNING_INSTANCE = D:\Oracle\Middleware\user_projects\epmsystem1/Planning/planification of the depenses1
  Call "% EPM_PLANNING_INSTANCE%\setHPenv.bat".
  '% JAVA_HOME%\bin\java' % HP_JAVA_OPTIONS % % com.hyperion.planning.calcmgr.cmdlnlauncher.HspCalcMgrCmdLineLauncher % JAVA_OPTIONS * / COMMAND: CalcMgrCmdLineLauncher.cmd
  
  P.S. When I work with CmdLineLauncher.bat (Te c:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\console\bin\CmdLnLauncher.bat - p: passwordFile - sserveur - Uadmin - rAlloc - f1.xml)
  I give the error: ' 2012-02-02 04:25:27, 860 WARN main com.hyperion.hbr.cmdlnlauncher.CmdLineLauncher - connection to business rules error.» The repository has not been configured, or you are not authorized to use business rules. »
  
  
  I'd appreciate any help! Thank you!

  Here you go - http://john-goodwin.blogspot.com/2012/02/odi-series-launching-calculation.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Adapter ODI for Hyperion Performance Scorecard

  Hello
  
  I want to install the latest version of Hyperion Performance Scorecard and I was wondering if ODI has an adapter for direct integration?
  
  I used HAL 9.2 of HPS.
  
  Thank you

  Hello

  Please refer to the bottom of post

  Adapter ODI for hyperion performance scorecard

  There isn't any direct way to integrate HPS. You must use Scorecard Import / Export utility.

  I hope this helps.

  Kind regards

  Manmohan Sharma

• ODI for Hyperion Planning Associates

  Hello
  
  Kindly help me to know the required component of ODI for planning.
  
  I use 9.3.1 planning and Oracle DB.
  
  (1) will not be OK if I go with "complete the installation that includes Oracle Data Integrator, Oracle Data Profiling and Oracle.
  Quality of the data to Oracle Data Integrator"with the client and the server on the same machine?
  
  Does also need to install these components?
  (2) browser to metabase
  (3) JDBC driver
  (3) light designer
  
  I think that the adopters are required for use with Hyperion.

  You should not need "" Oracle and Oracle Data Quality data profiling"
  When you install, you can just install the Oracle Data Integrator, then choose complete.

  See you soon

  John
  http://John-Goodwin.blogspot.com/