Given to nine monitors comes not with power cords or anything else.

Similar Questions

• DV7-3060us: light not on power cord

  Go directly to the question. Laptop plugged in no light beside red or white cord. Pull the battery still operational. With power and battery in power cord not plugged in load disconnect power cord and battery showes 45%. Any help with workload problem.

  Dear customer,

  Welcome and thanks for posting your query on the Forum from the HP Support

  It seems that your laptop is not charging the battery, we will surely help you this question

  Please run illustrated steps below to solve the problem:

  Step 01. Click the Start button

  Step 02. Type "Device Manager" in the start search box & open Device Manager

  Step 03. Get piles and expand it by clicking on the symbol to the left.

  Step 04. Right click on "Microsoft ACPI Control method battery compatible" & uninstall

  Note: This driver battery is re - install automatically when you restart the laptop

  Step 05. Shut down the laptop

  Step 06. Please, remove the battery and unplug the AC adapter

  Step 07. Press and hold the full power 1 minute button

  Step 08. Go ahead and replace the battery and plug the power adapter

  Step 09. Search for "Load connected" message on the battery icon

  After completing all the steps, if you are facing the same question again, please do more than three steps:

  1 perform a check of the battery in HP Support Assistant [install the software, if this is not available]

  Note: Replace the battery if check the health watch replace

  2 update the latest BIOS for your laptop on the Site of HP Support

  3. Please check your laptop with a known good power adapter & battery from a different laptop

  Note: If a known good battery also in charge isn't, we need to replace the motherboard

  How to improve the life of a battery:

  1. it is not advisable to use the laptop when the adapter is plugged

  2. it is not advisable to keep the power supply plugged in even though the battery is fully charged

  3. you must drain the battery completely before recharging it again

  4. Power Plan must be set correctly for extended battery life

  5. Please keep the brightness of the screen to the lower level

  6. Please turn off the Wi - Fi Connection when not in service

  7. remove the disc from the optical drive when not in use

  Test and calibrate the battery (Windows 7)

  http://support.HP.com/us-en/document/c00821536

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• Aspire laptop frezzes E1-571 and becomes unresponisve with battery in but works fine with power cord

  I have a laptop Aspire E1-571 who is having problems with the battery. When the battery is connected to the laptop will freeze and no longer respond. However with the battery and the power cord a/c is connected, it works very well. This laptop has been upgraded to windows 10 and can find no reason for this question that drivers are up to date. Only thing that I could turn on google was a possible problem with the power management software, but acer has no update for windows 10 I can find for this laptop.

  Unplug the power, remove the battery, press the power button / stop for a few seconds, install the battery, reconnect the power supply and turn on the laptop, see how it goes.

• Satellite L350 - 16L system restarts when you run with power cord plugged

  Satellite L350 - 16L
  32 bit windows 7 ultimate sp1

  Power cable is connected, start the start, and just at the point where desktop should appear, the system restarts.
  When the system is running on battery, everything works fine.
  When the system boots to battery, works very well, and if I plug in the power cable, the system hangs
  When the power cable is plugged in, battery charge normally.

  I tried the different power cable, same thing.

  Do you remember when this issue began to appear?
  It would be interesting to know if something special that has happened in the past
  You use the original Toshiba AC adapter that came with this laptop?

  I think that this problem occurs due to the problem of the motherboard and I imagine that there could be some electronic problem power if the AC isn't affected adapter.

  I think it would be the worst case, because it means that your motherboard must be replaced to solve this problem... motherbaord replacement is very expensive and, probably, it is not worth to fix...

  By the way: is it possible to reinstall the system, while the laptop is conencted to the power adapter? What happens if enter you BIOS mode?

• the model number and imei of iphone 6s can editable with the software or anything else?

  I want to know this weather model number and imei number can be changed to an iphone camera? my phone has been replaced but same issue was at new device but the imei and model number was the change of the new device. is this possible? that model number and imei number can be changed through software or reset of the device.

  No, they cannot be changed.

• monitor turns off not by the switch at the top. power cord seems loose at the back of the monitor. just need a

  I have a hp w2338h monitor, running Windows 7 and I am unable to turn off the monitor through the top switch. The power cord seems loose in its connection to the monitor. Do I just a new cord or something else is necessary?

  Thank you.

  Hello

  Try to push the power cord firmly upward.  It should not move when it is completely inserted.

  Try a reset of the monitor. Unplug the power cord from the monitor and hold the power button of the monitor for 30 to 60 seconds. Plug the monitor back in and it lights up.

• Power cord not identified

  My computer does not identify power cord I use and will not charge the battery. He tells me to plug a 65W or higher in order to achieve maximum capacity, battery, but that's what I use. I tried restarting the computer and power management, but nothing switching work. Now, my laptop must be connected at all times. What should I do?

  Hello

  Certainly possible that the load and the battery circuit has problems - battery may
  must be replaced. A good computer store can say what to (not the leeks and peaks at)
  a BestBuy or other big box stores) or the manufacturer of your system Support.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Try this - to make a Restore Point

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Then Control Panel - Device Manager - Batteries - Double click on each item - tab drivers - update drivers
  (who can not do anything) - then do a right click and UNINSTALL-REBOOT which will refresh the driver
  Stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HP 2311 x buttons on the monitor does not

  My monitor has decided that he does not want to turn off, or let me any setting.  Sometimes it works, sometimes it doesn't.  However more recently, he decided not do not work any more work.

  None of the buttons work, I get no message on the screen, I can't turn it off or change the settings.  I just got the monitor there are 3 or more months and this just started happening recently.  He did that sit on my desk.  Anyone with experience please help me!  I have an LG which is 2 years old and everything still works very well on this subject, it's not that I play with anything other than the power buttons, but it's pretty boring.  Any help is appreciated.

  Hi Paul,.

  Your monitor is covered by the warranty for a year if you bought it new.  Maybe you need to contact HP support.  HP support number is 800-474-6836 or 800-HPINVENT or online here.

  Try a reset of the monitor. Unplug the power cord from the monitor and hold the power button of the monitor for 30 to 60 seconds. Plug the monitor back in and it lights up.

• OfficeJet 8720: Officejet HP 8720 (D9L19A): power cord issue & legality in the United Kingdom

  Hello

  As a society, we standardize more than 150 sites on the new printer HP Officejet Pro 8720.

  We ordered about 8 at our dealer online recently (Softcat) and each arrived with a European power cord 2 pin and not a power cord 3 pins of the UK.

  This causes significant confusion for our end users, and I think that it is illegal to even provide goods in the EU without the correct national power cord.

  Our retailer say that HP have armed upward and shipped loads of these 8720's without the correct power cords. It seems that a mass surveillance on HP is illegal and a part too? How can this happen?

  Surely all stock the 8720's should be limited to the British market and fixed with the right power cord?

  I have not reported this Exchange Standard yet, but I want to just get an idea of what's going on?

  Thank you

  H

  @HKCHG

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display personal information (serial numbers and information).
  
  
  
  If you are unfamiliar with the operation of the function of the Forum, private messages you can learn it all here.
  
  Thank you for visiting the Forum from HP Support.

• computer laptop power cord overheating

  I have a HP Pavillion DV6409us.  I got it for at least 3 years.  The first power cord it came with broke at the bend of the hook into the computer, ordered a generic replacement cord - he worked nearly a year and snapped in the same place.  Ordered the exact same generic cord in May and it now (after using it for 3 months) overheating where the plug goes into the computer.  It got so hot you can feel it and he put a black line around the plug (the real end of rubber around the metal was extremely hot - almost soft).

  I decided that it must be something with this charger generic so I bit the bullet and spent 100 for new sector and HP power cord adapter.  It has today - plugged and it got hot in a few minutes.  What is the cause?  Obviously this is not the power cord.  Laptop was working fine and now would be if I could charge the battery.

  HP sent me some letters that the batteries being recalled, but when I look at mine until it is not on the list but really don't think it's the battery anyway because he's hot, even if the battery is out.

  I hope someone can help me - can't afford a new laptop now.

  The DC Jack on the laptop is very likely wrong, use a flashlight and look in the plug for damage, there will be some or all of the black plastic missing in the central part of the CC.

• Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to fix this ti net pr

  Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to solve this problem, the next time he throws."  Except that it isn't, I get the same message and the program closes.  Anyone know what I can do to fix it?  Can not backup, can't do anything.

  There are dozens of discussions in this forum that describe the fix

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• F1503 - led blue monitor does not power available. Unable to turn

  Hello

  I had my f1503 monitor into storage for a while and it finally worked its use. Properly connected all power and PC connections and changed the tension but no blue led light work and impossible to turn on the monitor. Checked the power adapter - green led on the power and 12,33 volts transformer showed at the end of the output of the power supply monitor.  The monitor plug was inserted into the grip. Help, please?

  That the monitor has a fuse that needs to be replaced?

  Hello Bruce123456,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are having problems when your flat screen HP Pavilion f1503 monitor does not come. The problem you describe seems to be a physical problem, and I think it would be better if you contact HP Support for service options.

  I want to thank you for display on the HP Forums. Have a great day!

• I can't put one of my photos as a background. It comes up with 'The file that c:\users\daniel\appdata\roaming\microsoft\windows Photo Gallery\Windows Photo Gallery wallpaper.jpg could not be written. Please help me.

  Hi, I have problems on developing an image as a wallpaper on my laptop.

  It comes up with 'The file that c:\users\daniel\appdata\roaming\microsoft\windows Photo Gallery\Windows Photo Gallery wallpaper.jpg could not be written.

  I tried right click and do it the long way to go to appearance and personalization in the control panel in the start menu. None of these work and I wonder why it's happening.

  my computer is Windows vista Home premium and is about half a year. If anyone knows how to solve the problem of it not allow me to set a background please give me suggestions.

  Dan

  Treat it as a corrupted user file.  To fix this usehttp://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.  Use the new administrator account to do this.  Follow the directions given and everything will be fine and your new admin account should work normally.  Once you have ccnfired you can access, to all your acccess all of your programs and files, you can delete the old user obsolete and corrupt.

  That's all there is to it.  Now that we know, this is the profile and not the system, the solution has been set for us.

  I hope this helps. Feel free to post back with any questions as you go along.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I get no "supported" when trying to connect your new monitor VGA cable. Everything goes well until he gets the logo of microsoft and begins to load vista and it comes up with the message of unsupported. Sophie Thanks__Errol

  RWhen I try to hang a new monitor with VGA computer cable runs and gives me the BIOS display then it starts to load microsoft. After a few seconds (maybe 30) it says no "supported" thanks for any help.

  Kraggyemember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  It's good to hear - it means that the monitor is OK and that it is compatible with Vista.  It is still unclear on the video card or the motherboard on the computer (or any other problem this computer might have) = but one step at a time.  You have made great strides and ruled out several possible causes that we must now check or test.

  What is the EXACT error message you are getting (Word for Word)?  Which is the key to product, the manufacturer, brand, model and serial number or your computer (I assume it's using the original video card)?  What i the manufacturer, brand and model of the new monitor?

  Even if you could get the Microsoft drivers (which I don't think you can), you should take them to the device manufacturer or the manufacturer of the computer, if they moved on the computer.  They are likely to be more current and have fewer problems.  And you want drivers, firmware and software necessary or required by the device (they will be either the list which is available or you can ask for help and they should direct you to what you need).  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you shouldget to the monitor, the video card and the motherboard and all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  I hope that drivers will solve the problem.  If not, we have to try something else (not sure what yet, but we will come with an option).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.