Giving access to the customer on the site before final completion

Similar Questions

• Unable to get access to the site even if the correct user name and password provided. They checked carefully and it keeps telling me they are incorrect

  I tried to access the site to blainroe golf club and although I repeatedly gave the right username and password, it continues to tell me that it's a mistake and I therefore can't access.  Could you please help me solve this problem

  You will need to contact the golf club blainroe for connection of help to their Web site.

  I forgot the password:
  http://blainroe.com/mysitecaddy/site3/members.htm?login=0&type=zone&blockErrors=true

  The above page also has their phone number and email to contact them.

• Internal access to the site at the remote location via wifi

  We have an internal site to A location and we have a 2 layer hose B location. When you use the ethernet connection, site B can access the site. What we want to do, is allow them to access via wifi with the VPN site to site (who currently works) hosted by of our Sonicwall.

  How this is a problem is our network is separate; wifi at site B is on the DMZ. We added access rules to allow the DMZ-> VPN traffic on the site, which did not work; No ping, no traffic, no communication. We've also added policy NAT, same story.

  My theory on why it does not work is because the VPN tunnel to one SW to another is related to X 0, but even after enabling access, it's the same result.

  Any help would be appreciated. Thank you all!

  Hello

  Is DMZ subnet to site B added under 'Local networks' VPN B Site and under 'Remote Networks' policy in Site A VPN policy? If you have then SonicWALL auto-créera access rules to allow WiFi traffic. Basically, you need to add the DMZ subnet in site B the VPN policy.

  You can also see the article: https://support.software.dell.com/kb/sw7725

  #IWork4Dell

• Remote access to the site to site VPN

  We currently have a VPN site-to-site set up on a direct line between our two data centers. Hosts on site one can speak to guests at site B, and talk to the hosts to site A to site B guests.

  I've recently implemented a site A. VPN VPN remote access clients can access all of the resources behind the ASA at A site without problem. However, strange things happen when they try to contact the site B.

  I have set up corresponding exemptions of NAT on each side of the connection. The remote site reported no abnormalities. When you attempt to connect to a remote VPN client to site B, the only errors that appear are on the SAA to site A. When a remote client attempts to connect to a host at site B, the following errors appear in the log:

  % ASA-3-305005: no group of translation not found for tcp src outside:10.3.0.1/60851 dst ds3:10.0.1.42/22

  I have the exemption following NAT set up on site A:

  access-list sheep; 3 items

  access-list 1 permit line sheep extended ip 10.1.0.0 255.255.0.0 10.0.0.0 255.255.0.0 (hitcnt = 0)

  allowed to Access-list sheep lengthened 2 ip line 10.1.0.0 255.255.0.0 10.3.0.0 255.255.255.0 (hitcnt = 0)

  allowed to Access-list sheep line 3 extended ip 10.3.0.0 255.255.255.0 10.0.0.0 255.255.0.0 (hitcnt = 0)

  I work on it for a few days now and hesitate to open a ticket of TAC. I've seen a few similar questions on the forums, but have found zero with a working solution. I tried to follow the technical notes on Cisco's Web site for a configuration similar to, but had no luck.

  Also, I enabled same-security-traffic on intra and inter-interface interface.

  Any help would be appreciated.

  HUB of the ASA, is this your topology? If so try below suggestions.

  Inside 10.1.1.0/16 Net

  Net 172.16.0.0/28 - net through Tunnel L2L 10.0.0.0/16 end DS3

  VPN RA Net 10.3.0.0/24

  To RA to access the L2L tunnel end hosting you will need to exempt sheep rule applied to the ds3 interface.

  based on the journal

  % ASA-3-305005: no group of translation not found for tcp src outside:10.3.0.1/60851 dst ds3:10.0.1.42/22

  Try this

  no scope list ip 10.3.0.0 access test allow 255.255.255.0 10.0.0.0 255.255.0.0

  test the ip 10.0.0.0 allowed extended access list 255.255.0.0 10.3.0.0 255.255.255.0

  test access list 0 Tan (ds3)

  on the end of the tunnel (spoke), to allow the network of RA from the FOCUS of the ASA in the interesting traffic.

  Let us know how it works

  Concerning

• Problem blackBerry Smartphones with access to the site of mobile.blackberry of my 8900

  Hello

  I'm new to this forum, and I have a problem. I can access is no longer the site http://mobile.blackberry.com from my Blackberry curve 8900 for two weeks. Everytime I try to log in, from the bb browser or Opera mini browser, a message is displayed indicating that this is a non-blackberry page. the text of the page indicates that "Unfortunately, your current device and/or browser is not compatible for this site." What should I do to access the site from my Blackberry to download stuff. I have the latest version of the software that I installed today thinking it solve my problem, but to no avail. Can someone help me?

  Hello

  I use mobile.blackberry.com

  I suggest you open the browser, the functioning of the menu key cache, clear all categories.

  I would go to the configuration of the browser and select browser Blackberry emulation.

  I suggest a battery pull to set options and completely clear the queues.

  Let us know how it goes!

  Thank you

  Bifocals

  No data will be lost when you do the following: remove the battery while the device is activated.
  Remplacer replace after one minute, let the device reboot 1-3 min, see if the problem is corrected.

• Access to the Site Muse

  If I replace my hard drive, what should I do to maintain access to my site built in Muse CC, once installed my new hard drive?

  You just need the original. Muse of file and the assets you used in the site.

• Firefox guard loading on certain websites without fully loading them so I did not have access to the site.

  It only happens with some sites (www.dumpert.nl) when I want to open a video/film. With explore I have no problem with the loading of the same site. On another pc, the site opens properly with firefox.

  I made a few changes on the site, the problem should be solved now.

• Is there a firewall means a single VM away from the Internet while still giving access to the LAN?

  I'm trying to find a way, if possible, to partition a simple VM away from the WAN (Internet) while allowing access to a subnet of the class-C using VMWare Workstation and outside the computer virtual guest himself?

  Install a 2nd NETWORK card is not my preferred option.  Home & comments are windows.

  I am currently configuring the MS Loopback map with the host firewall rules, but can't seem to figure out the trick to get this installation work.

  If anyone has any suggestions?

  Thanks in advance...

  If you have administrator access to the router that provides your connection to the Internet, you could give a fixed IP address to the virtual machine and set a rule of access on the router to only allow access to IP addresses on the local subnet.

• Access to the site of a new HD

  I just added a new internal HD to replace my default apparently one and cloned the old drive to the new. All my sites in Dreamweaver MX point to the old Mac HD (eg., read files in the Site: Site - schreiberHSA (Macintosh HD:Schreiber Web site).)
  
  How can I get the new drive to the location of the site and not lose files?

  You haven't lost the files. They are still there on the new drive. Just
  Change your site definitions to point to the location of the site of the new drive.

  How many sites?

  Have you updated to 6.1 DMX6.0? Please hurry.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "joe.b. " wrote in message
  News:gqgaem$EP9$1@forums. Macromedia.com...
  > I just added a new internal HD to replace my default apparently one and
  > cloned
  > the old drive to the new. All my sites in Dreamweaver MX pointing
  > the old
  > Mac HD (eg., read files in the Site: Site - schreiberHSA (Mac HD:Schreiber)
  (> Web site).
  >
  > How can I get the new drive to the location of the site and not lose files?
  >

• When I hover over a link, Firefox adds the site before my link makes it bad.

  I was check the compatibility of my site. So I opened http://www.sethermal.com. It was fine until I flew over a link. Firefox has added the site and broke the link.

  For example.
  I entered the address bar www.sethermal.com . The site came fine.
  I hover over the 'Site Map' link on my page. Link is http://www.sethermal.com/pages/site-map.html
  Before clicking on the link, I looked down and Firefox shows www.sethermal.com/-www.sethermal.com\pages\site-map.html
  When I click on the link of course I 404 page not found

  Why is this happening?

  These links have a backslash instead of a slash.
  Firefox is not so forgiving as other browsers and treats a backslash as a character valid and thus prefixes links with the URL of the page.

  [1] <a href="http:\\www.sethermal.com\index.html">
  [2] <a href="http:\\www.sethermal.com\pages\service.html">
  [3] <a href="http:\\www.sethermal.com\pages\about-us.html">
  [4] <a href="http:\\www.sethermal.com\pages\contact-us.html">
  [5] <a href="http:\\www.sethermal.com\pages\site-map.html">
  [6] <a href="http:\\www.sethermal.com\pages\products\Application\application.html">
  [7] <a href="http:\\www.sethermal.com\pages\products\IndustrialHeaters\industrial-heaters.html">
  [8] <a href="http:\\www.sethermal.com\pages\products\ComponentHeaters\component-heaters.html">
  [9] <a href="http:\\www.sethermal.com\pages\products\ProcessControls\process-controls.html">
  [10] <a href="http:\\www.sethermal.com\pages\products\PackagedProducts\packaged-products.html">
  [11] <a href="http:\\www.sethermal.com\pages\products\HeatExchangers\heat-exchangers.html">
  [12] <a href="http:\\www.sethermal.com\pages\products\ColdWeatherProducts\cold-weather-products.html">
  [13] <a href="http:\\www.sethermal.com\pages\products\Sensors\sensors.html">
  [14] <a href="http:\\www.sethermal.com\pages\resources\engineering-data.html">
  [15] <a href="http:\\www.sethermal.com\pages\resources\industry-application.html">
  [16] <a href="http:\\www.sethermal.com\pages\stsnews\sts-news.html">
  [17] <a href="http:\\www.sethermal.com\pages\stsnews\hot-products.html">

• I want to prevent access to the menu bar (file, editing, display, tools, someone) and prevent access to the restoration of firefox completely.

  Basically, I set up firefox for my guest account. I've already locked download (requires password) prohibited access to modules and tools. Really, there are only a few more things I want to set up.

  For example when you right-click at the top of firefox it will show 'Menu Bar' and 'bookmark' tab I want to prevent users from right-clicking and showing that the bar and ultimately using the help > troubleshooting Info > update Firefox, because they could reset Firefox and get full access to download it again.

  I would also like to prevent access to the right by clicking on entirely, showing the context menu.

  COR - el said

  You must create the chrome folder and the file userChrome.css in there.

  • Create the folder chrome (lowercase) in the .default < xxxxxxxx > profile folder if the folder does not exist
  • Use a text editor like Notepad to create a userChrome.css (new) file in the folder chrome (file name is case sensitive)
  • Paste the code in the userChrome.css file in the Editor window
  • Make sure that the userChrome.css file starts with the default @namespace line
  • Make sure that you select "All files" and not "text files" when you save the file via "save file as" in the text editor as userChrome.css.
    Otherwise, Windows can add a hidden .txt file extension and you end up with one does not not userChrome.css.txt file

  How will I know which is my namespace? Where can I find this information?

• IE 9 will not open streaming video in a single Web site. Access to the site and the videos, but they do not play. Help?

  all the other sites with streaming work.  This site works on my other computer running IE8.

  Hello

  1. what exactly happens when you try to stream any video on this website? You get the error message?
  2 may I know what site is it?

  See the bottom of the articles that might help you.

  Some sites Web may not behave as expected in Internet Explorer
  http://support.Microsoft.com/kb/956197
  You can not view, access, or load some Web pages in Internet Explorer 8 and Internet Explorer 9
  http://support.Microsoft.com/kb/967897

• RV180 restrict access to the Site to Site VPN

  Hello

  I'm trying to set up my network so that VPN traffic is routed only to a physical single on the RV180 port or to a certain subset of devices on a network.

  I have a site to site vpn configuration in a Home Office and connect to the corporate network.  The user has a couple of devices on the home network who need to access the corporate network.

  We hope to leave his PC accessible to its home network and the corporate network, but limit other devices to access the vpn.

  I think that I could do playing with the subnet, but I just can't get my head around it.

  It must be something simpleish to do this, isn't there?

  I'd appreciate any help you have.

  Thank you

  Gary

  Hi boys, here's a hypothetical situation.

  VLAN 1 is port 1

  VLAN 2 is port 2

  VLAN 1 has a switch connected to your local network of services

  VLAN 2 has a switch to maintain your VPN.

  The configuration of the port for each port would be the vlan respective unidentified.

  You can disable the router in order to prohibit intervlan communication. But also, and especially, the vpn is a specific meaning, subnet, you specify the specific ip subnet on the config of the tunnel because the config include not a second subnet will not work it's traffic in the tunnel.

  -Tom
  Please mark replied messages useful

• How do you restrict access to the site visitors to certain geographic locations?

  I wonder if Business Catalyst has developed a way to prevent visitors from some countries to access my Web site? I found this old thread: the specified item was not found., but surely in the last 12:00 has developed a better option to add code to the Adobe Muse pages?

  recently, we have developed an Intranet in British Colombia site for a multinational company.

  Their requirement was to force the connection if outside their many firewall

  but inside they have full access.

  So, we built a webapp that they could use to control which IP addresses have been approved. Then, we used liquid to do queries on the front-end server.

  Yyou could use this same princopal to approve and reject all ip address ranges (IE countries)

  restriction by IP is not infallible, but it is possible

  Brett stockley

  www.prettydigital.com.au

  + 612 9212 4485

• Access to the site from the Office on a mobile device

  Users want access to my site with a mobile device while it is connected to an external monitor or TV.  To do this, they need a way to access the version of office site, but even the option of 'Request' site Office of the browser does not work for my web site.  Is there something I can do in RoboHelp HTML 11 (Win7 OS) to solve this problem?

  Receptive HTML? (Skin Nivida? Send me an email.) In this case, media queries must be updated to account for the devices. For example, see: media CSS queries - the Web Developer's guide | DND