GoldenGate colmap question on the calculation

Similar Questions

• Closest to the rounding rule - question of tax calculation

  Hello

  
  

  We have Setup Ebtax to round to the NUMBER more CLOSE.

  
  

  When we enter into a transaction in AR for a transaction with the taxable 7,958.95 and tax rate = 20%, the system calculates the amount of tax as 1,579.75 but we do not believe that it is correct.

  
  

  Should not round up to the 1,591.79 which is the result of
  

  
  

  
  

  7,958.95 * 20% = 1,591.79

  
  

  Thank you

  CV
  

  I should have said that the system is the calculation of 1,591.75 (not 1279.75)

  Thank you

  CV

• Many questions about the HP 50 g

  I just ordered a HP 50 g graphic calculator! I have a few questions about this so hang on tight! What is the USB connector on the calculator? Mini-USB, micro USB, or is it a connector owner, "custom". Then, it would be possible to connect a keyboard to the HP 50 g by using the USB Port? Is there a program that would make this possible? (I doubt it would work if you plug it..) I have a Mini-USB to female USB 2.0 connector. So I could just plug the keyboard right, provided that the port on the calculator is a Mini-USB Port. If this is not so that I could use my female to female USB adaptor to connect the keyboard.

  Thanks for your help,

  Zekelegge

  Hi!, zekelegge:

  Welcome to Forum!

  The only printer I use, 50G calculators, 48GII, 39GS and 17BII +, as well as many former models, such as the 48 s/SX/G/G + / GX, 38 G, 39 G, 42, 41 C/CV/CX and 28 C/S, is the infrared printer HP 82240 b. If you can use the emulator HP50G, on the PC, the simulator of the printer, you can download, since... http://www.HPCalc.org/details.php?id=7386

  The printer... HP 82240 B

  

  The cable series...

  

  The description... http://www.allenwan.com/hpcalcserialcable/

  The original cable...

  

• HP 40GS stuck on the hourglass for the calculation of certain integrals

  So I used my calculator HP40GS for awhile, and I've never had problems with it.

  Recently, when reviewing for the examination of calculation AP, I noticed that the calculator could not do some integrals. Because I already went through the lesson using the graphing calculator calculators and integrals without problem using my computer, I don't think that there is nothing special about this one.

  One of the integrals in question is 3 * e ^(-x/2) * sin (2 x) on the interval [0,2].

  I tried to make the home screen capture (in the mode of operation):

  ∫ (0,2,ABS (3rd ^(-x/2) * sin (2 x)), x)

  The calculator has been blocked at least five minutes on the same screen with the little hourglass until I pressed on 'on' to force her to leave.

  Also, I tried to do this in CASE mode, using the manual view. This also does not work.

  Other calculators in the classroom (TI-83) did the integral almost immediately.

  My memory is not yet close to being complete.

  Is there something I could do or check to solve the problem? Other integrals seem to be more or less fine.

  Thank you!

  When you do digital integrals, some of them may take some time. On the 40gs and many other units of HP, the accuracy of the correction is what distinguishes the accuracy of assessment. Try to set the precision of DIFFICULTY 4 in the homescreen of modes and re-evaluate. I suspect that he will return very quickly. That should mean "exact to 4 decimal places.

  You can also try to do exactly in the CASE and then to assess the result. In many cases, it may be faster.

• Table Vision Builder & features of the calculator

  Hello

  I have a question about VBAI. I couldn't find these features in the software and I couldn't be sure if the software did these features or not. So, I just wanted to ask here, and if these features do not exist, I'll post to the exchange of ideas of Vision.

  -When I'm on tables in VBAI, on the stage of the calculator, I don't see the results of all computations of element tab measures. Only a few of them are visible, and there is no way to scroll left and right to see the other.

  Also, when I try to use these results table on the custom recovery stage, I can only use them as a whole, without any choice of format string.

  

  Are there other ways to do this or not?

  I see the same behavior on my end with digital pictures. I want to play with it some more, but I will probably be filling a CAR for that.

  To work around the problem, you can convert the digital table in an array of strings. It seems that tables of channels is displayed correctly the decimal parts after the conversion. I suggest using the fractional string function number, located in the String-> String Conversion/number. This will allow you to input a table 1 d of slna and specify the precision.

• Key to log on the calculator tool

  The calculator tool provides a key of "log".

  Which log function does this key offers? It is to base 10 or something else?

  Log is base 10. LN is base.

  Click Help, click Help topics. Select "that all the buttons do.

  Or visit: http://windows.microsoft.com/en-US/windows-vista/Calculator-frequently-asked-questions

• What does % button in the calculator of Windows 7?

  What makes the key on the calculator of Windows 7%?  There is not question in Help and I can't interprest the results when I press on it.

  There is a curious difference between Windows 7 and a pocket calculator. On a terminal, you must press the = button after pressing the button for the answer. The Windows 7 calculator, you get the answer immediately after pressing the key.

  Personally, for most of the calculations I just move the decimal point 2 places in my head and type the decimal equivalent of the percentage directly in & therefore do not use the percent button at all.

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• The Calculator display is glitching in Windows 7

  Hello

  I have a question where the bottom of the calculator of Windows 7 (behind the buttons) displays the image of the Office opening.  When I move the application to another area of the screen, it keeps the ghost image of the background where he opened its doors.  Also I try to use the calculator, the numbers of top of the other to create a jumble of numbers.
  It looks like this:
  http://PostImage.org/image/93numxfx3/
  -J' tried C: > SFC/scannow
  -J' tried logging into my account of comments to see if my account is corrupted and it has the same behavior.
  Is there anything else I can try to solve this problem?
  Thank you
  Dave.

  Oddly enough, I think I can find something related - I managed to solve my problem.  I had an older version of http://www.fastpictureviewer.com/forum/viewtopic.php?f=11&p=3806 that was interfering with Visual Studio 2012.  When I updated this Codec (that I use to view the RAW files from my camera) went off the issue of the calculator.  I had an older version of FastPictureViewer - 2.4 - ish.

• Word and the calculator do not remember last window position when opening

  I have a problem with the position of the window for Word and calculator.  They don't remember the last position when open.  I tried numerous strategies online such a ctr + close, etc..  What happens is that they will remember the position of the next 2 times they open and then, when opened for the third time, they pass to the left corner of the upper screen.  Excel, Explorer, etc., seem to remember the last screen position and size.  Why not the word and the calculator?  Running Windows 7, 64 bit, Dell 24 inch monitor.  I would like to than the calculator to always open in the lower right corner.  All the patches?

  Thanks for these suggestions.  The problem occurred at any time in the past.  Surprisingly, before me, start to implement your suggestions, there was a series of 15 + / Windows updates.  After these updates, problem solved.

  Don't know why it happened to Word and Excel or Outlook, as they are all of the same suite of Office 2010.  Before post me my question, I did re install Office, and he did control the problem, but only briefly.  I'll see if these new Windows Update solves the problem for a longer period of time.  Hope so.

• How to disable the warning of validation on the calculation (read-only) field in the table

  Is it possible to add a line in a calculation script (JavaScript) that prevents a dialog box of a calculation field validation?

  Scenario:

  • Working with fields in a table inserted.
  • In each line, I have a couple of fields that the user has entered. These fields have a Validation model has allowed that the user must enter the data correctly.
  • There is a calculated field based on the data entered by the users. It is this field that throws a warning dialog box "the value entered for Total_Row1 is not valid. "To ignore the validations for Total_Row1, click on ignore.

  Even if I turn off the Model Validation on fields used for the calculation of the warning dialog box always appears. So, it seems to be isolated in the field of computing.

  The calculation area displays the time and I got it originally set as a Date/time field, but also tried to use a text field (as the calculation should appear as 0:45 for 45 minutes in this area).

  I have a suspicion that the warning appears only because I used an array for formatting fields, as I used similar validation profiles and other calculation fields and see not the message when the fields do not appear inside the table.

  I think of easier workaround would be to disable validation for this particular calculation field, but I have no idea how the script that. Any help appreciated lot.

  CARI

  I discovered the problem.  In a word: it was a mistake by naming the fields.

  • I have fields named with line numbers in the field name (for example FieldName_Row1).
  • and fields calls with FieldName_Row1.formattedVallue must have triggered some confusion.

  As soon as I removed the word 'Row' of file names, the question of the warning dialog validation mystery Adobe Acrobat for the calculation field have disappeared.

  Ago about 3-4 hours of my life that I won't be back... ha - ha but if someone else has the problem, I thought I better share my discoveries

• Manually change the result of the calculation

  I have a form that I want to be able to manually change the answer to the calculation. The goal is to accept a value calculated, unless the user enters a different value in the calculated field. The calculated value will usually be the desired value, but not always.

  I was almost able to achieve using several fields (that I have that knowledge base of javascript), but there is just one problem where a value appears only a touch later. I know not yet why, as the other field is fine.

  I have attached the form using: https://dl.dropboxusercontent.com/u/11052710/Adobe%20Acrobat/Overriding%20LVEF.pdf

  Hello.

  This topic answers the same question: http://abracadabrapdf.net/forum/index.php/topic, 3009.0.html

  You can download the sample PDF content in the 4th answer here: http://abracadabrapdf.net/forum/index.php?action=dlattach;topic=3009.0;attach=2506

• Compare the text of the combobox as a condition in the calculation of the field another.

  I'm doing a condition, if one of the 15 comboboxes has a certain value of selected text list, then a button is displayed.

  I tried to follow this example, which I found here on another question:

  var t = document.getElementById ("fTerminalType");

  selectedText var = t.options [t.selectedIndex] .text;

  the part of my code that uses it is:

  for (i = 1; i < 16; i ++) {}

  var t = this.getField ("ComboBox" + i);

  var s = t.options [t.selectedIndex] .text;

  If (s == 'Specific text') {}

  k.Display = display.visible;

  }

  }

  "Combobox1" so has "A specific text" selected, but the "k" key does not appear visible, and the rest of the code (a calculation) returns empty.

  If I delete the internal code of "for () {}", the rest of the calculation works, if the syntax error is specific to the part of text comparison.

  I tried 'value', ".innerHTML", ". export.value", '.change' and '.changeEx' instead of '.text', nothing has worked.

  I don't know if pdf forms have jQuery, I could try it but that he would need assistance with the code so be it.

  Thank you.

  The value property returns the value of export of the selected item if it has one, otherwise it returns what appears, which is what you call text. SO if someone type something, you can retrieve it with the value property, even though you really better to use valueAsString. Check the console JavaScript (Ctrl + J) to see if errors are reported.

  If you need to get the value of the export value display, you can use the field currentValueIndices property to get the index of the selected item and use it with the field getItemAt method to get the display value. A code example is the Acrobat JavaScript reference.

  I don't notice anything wrong with your script updated, if you add a break after the k.display statement statement, since you do not need to keep a loop once it is set. Unclear if it is initialized to display.hidden somehow, what would make sense.

• How to make the calculation script to show 2 decimal places and stop rounding down to integers?

  Hello. First of all, thank you to those of you who have helped me create an interactive PDF file last year that worked perfectly if only integers are entered. This year, my client wants to show two decimal places in the calculations, and I'm back in this forum hoping to find the same expertise to make it happen.

  My form includes 43 fields for various monthly expenses. The sign of dollar for each field is part of the content of the form, not part of the scope of formatting. Users enter values directly in these fields, and the fields are formatted to display two decimal places. Each of these includes a the following validation script:

  Event.RC =! (event.value & & + event.value < 0);

  
  

  To the right of each of these fees, the fields are yes/no boxes ( expense Typecalled) that answer the question, "is this essential expense? The value of exports for Yes's 'essential', and the value of exports is "discretionary".

  
  

  A value entered in all areas of expenditure is directed to the field Total expenses by checking Yes or field Total discretionary spending by clicking No. two of these total fields are formatted to display two decimal places. In addition to long calculation scripts, the two totals fields include this custom validation script:

  If (event.value == "0") {event.value = util.printx ("", event.value)}

  Here's the problem: when values with two decimal places are entered in any area of expenditure, the calculation in two fields of total script rounded to the whole number closest. When 10.99 is entered in a field of expenditure and the Yes checkbox is checked, the value 10.00 is displayed in the field Total expenses . I want to display 10.99.

  For testing purposes, I inserted a new text field and did a simple calculation in choosing the fields of the somme and the values displayed correctly. The problem is definitely with the script in the two fields in total .

  
  

  I can drop the scripts of math here, but they are long and I'm not sure what the Protocol is super-long positions. I could also download the file, but I never did it and will need to understand this.

  Thank you for taking the time to read this. If you can help me, very well!

  To explicitly convert the field values for numbers, do something like this instead:

  var expense0 = + getField('monthly$.0').value,

  depenses1 = + getField('monthly$.1').value,

  etc.

• Problem with the calculation script - dividing one field (a number) but another field (a number that corresponds to a sum of other fields)

  I have a table that contains the users to enter the number of books in a type of food (Fruits & vegetables, products dairy, protein, grains, etc.). There are 8 fields whose amounts are totaled in a field (PoundsTOTAL) using the calculation of "value is the sum...". ».

  The question that I am running is that for each type of food, there is also a percentage field that indicates the percentage of the total books that represents the type of food. If I used the simplified field notation (PoundsDairy / PoundsTotal * 100) I get the dreaded "the value entered does not match the format of the field" because the PoundsTOTAL field is 0 until someone between numbers in the fields above him. I tried using the code I found on this forum, but it does not work for me (I do not know I did something wrong). I enter a number like 500 in the field of the PoundsFV and the PercentFV field shows nothing.

  Here is the code I use for one of these calculations:

  (function () {}

  Get the field values as numbers

  var lbsfv = + getField("PoundsFV").value;

  var lbsttl = + getField("PoundsTotal").value;

  Perform the calculation and the value of this field will cause

  If (lbsttl! == 0) {}

  Event.Value = lbsfv / lbsttl;

  } else {}

  If lbsttl = 0, this field blank

  Event.Value = "";

  }

  })();

  For reference, the referenced fields are shown in this image:

  .

  Your domain is named PoundsTOTAL, not PoundsTotal.

• Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Hello

  Our environment is Essbase 11.1.2.2 and work on Essbase EAS and components of Shared Services. One of our user tried to execute the Script of Cal of a single application and in the face of this error.

  Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  
  

  I did a few Google and found that we need to add something in the Essbase.cfg file as below.

  Dynamics Processor Calc 1012704 fails to more blocks ESM number for the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Possible problems

  Analytical services cannot lock enough blocks to perform the calculation.

  Possible solutions

  Increase the number of blocks of analytical Services can allocate to a calculation:

  1. Set the maximum number of blocks of analytical Services can allocate at least 500.
     1. If you are not a $ARBORPATH/bin/essbase.cfg on the file server computer, create one using a text editor.
     2. In the essbase.cfg folder on the server computer, set CALCLOCKBLOCKHIGH to 500.
     3. Stopping and restarting Analysis server.
  2. Add the command SET LOCKBLOCK STUDENT at the beginning of the calculation script.
  3. Set the cache of data large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH parameter.
     • Determine the size of the block.
     • The size of wrestled data.

  In fact in our queue (essbase.cfg) Config Server we have given below added.

  CalcLockBlockHigh 2000

  CalcLockBlockDefault 200

  CalcLockBlocklow 50

  
  

  So my question is if edit us the file Essbase.cfg and add the above settings restart services will work?  and if yes, why should change us the configuration file of server if the problem concerns a Cal Script application. Please guide me how to do this.

  
  

  Kind regards

  Naveen
  

  Yes it must *.

  Make sure that you have "migrated settings cache of database as well. If the cache is too small, you will have similar problems.