Good way to disconnect a device USB of Airport Extreme

Similar Questions

• Solutions on device USB of Airport Extreme

  Spending some time trying to connect a key USB of Airport extreme and to map it to a Mac laptop computer windows 7-computer windows 10.

  My solution after a bit of frustration:

  Fixed the problem of Player connection by downloading the Airport utility from apple.com / support to the computer windows 10.  Rightly guessed, as I couldn't find a real solution to search Google.  During the installation of the airport utility window connecting drive skipped upward, as if she had a laptop mac and another computer Windows 7 (with installed airport utility).  Other issues that I have encountered in the last few days is that the USB key must be formatted FAT32 (not NTFS) and max file size is 4 GB FAT32.

  Something else you can try. I suggest that you reformat the USB format HFS +, instead of FAT32. You won't have the size limit of 4 GB, and you can still share the disk for Mac & PC. HFS + has a volume of 2 TB and 4 GB file size limits.

  Airport file server works best with disk formatted as HFS +.

• Device not found Airport Extreme

  We have an airport extreme connected generation via Ethernet to a switch that provides network access to our entire House (about 10-15 connections) via wifi access points all Ethernet hard wired (linksys + apple) and a direct wire to a PC. Airport extreme is the dhcp and is connected to a gpon fiber using PPPoE.

  The problem now is that the AirPort Extreme disappears from the airport on iOS Mac utility and Windows, it is found however the network and the Internet continues to operate normally on all connected devices. I can also continue ping on the router.

  I have reset the AirPort Extreme to the default settings, but the problem continued...

  I tried to unplug all devices and have AirPort Extreme only connected to him have the fiber but the problem persists...

  no idea how I can fix this problem?

  You describe a known problem with Back to My Mac which first appeared around July 13. The problem manifests itself in a message "Device not found" meant to be displayed in triangular AirPort your AirPort base station with a yellow icon utility, while the router of the device functions others continue to work normally.

  If you use an airport Time Capsule, backups will not work using that device or USB hard drive units connected to it.

  Apple will only be able to solve this problem, so all you can do is wait for them to do. If you want to contact them to tell them about it, using the contact Support link.

  There is a solution: on a Mac, open AirPort Utility and select file > configure other...

  For each of your routers Apple AirPort Base Stations serving their respective networks: its IP address and password (if you don't know either of them, read the Note that follows the horizontal rule below). Then, on the tab of the Basic Station , delete all the entries in the Back to My Mac using the 'negative' button, then click on Update.

  Which must be re-established appearance of this base station in AirPort Utility, as well as in a side bar of the Finder, if all shared disks are plugged on. It will also restore possibility of Time Machine to save on these discs, if this has also been a problem for you.

  If this seems to imply that you will not be able to use Back to My Mac until Apple fixes it, you are probably right. Well to diagnose problems of the CCMM is tedious work that I have not yet finished.

  Apple does not participate on this site except in a very limited way, so don't expect is not a response from them, here or elsewhere for that matter. We'll just have to wait for them to fix it.

• Is there a way to disconnect all devices?

  People keep complaining that I do not answer when I'm not connected. I thought maybe it was Skype high reading on my phone, so I uninstalled it. But the problem persists. People see me as 'available' when I'm disconnected from all the devices I own.

  Anyone know what could possibly be the cause? And is there a way to fix it or is it possible to display all devices, I'm connected?

  Any help is appreciated!

  You can try the /showplaces and cat /remotelogout commands.

  http://community.Skype.com/T5/Windows-desktop-client/Skype-shows-me-online-though-I-am-not-connected...

• Device USB-8451 reference and attached device

  I have 2 test systems PC using NI USB-8451 I2C communication.

  A reference device... 33 b... and the other a... 33D..., so I can't use the default fixed values.

  Also, I may need to run an exe have respected for others to use.

  Questions:

  1. it is not VISA. No VISA opening or closing.

  2. nothing in the compare pallete validates this reference of the device.

  3. no USB device attached validation (Are You There).

  Up to now

  1. a successful simple i/o operation can check "Are You There". I chose Dig I/O read a bit.

  2. #1 above also validates the reference of the device.

  Is there a smoother, faster way to do this? Windows operating system does not record stuff USB etc... ?

  TODO:

  Get the device USB-8451 reference in MAX.

  This link may be the solution, I'll know tomorrow. I was expecting a VISA VI to be useful.

  http://forums.NI.com/T5/LabVIEW/how-to-ask-the-I2C-device-alias-name-from-the-Max/TD-p/1231439/highl...

  Jeff

  This seems good.

  Thank you

• We can add money on an iphone to get the new, a good way would it cost?

  We can add money on an iphone to get the new, a good way would it cost?

  You must speak to your support for example provider (at & t, Verizon, etc.) about adding money to pay your device if not already eligible for an upgrade. Hope this helps, good luck to you.

• How to use ANSI C / C++ to control a device USB - 6216 BNC

  Dear Sir or Madam,

  I want to use Visual C/C++ (but not the .NET language) to contorl a device USB - 6216 BNC and write a simple app for a small project in my lab. What I want to do is very simple. I want just to provide a signal to exit through a channle AO and saving an AI channel input signal. I do not want to LabVIEW, LabWindows/CVI, and Measurement Studio, so that this simple application can be autonomous and does not depend on LabVIEW, LabWindows/CVI, and Measurement Studio. Can anyone advise me on what I need to do to get there?

  My naïve thought is that I will follow the following steps:

  1. install the DAQmx drivers on acomputer,
  2. Connect the device USB - 6216 BNC to this computer,
  3. Make sure that the device is recognized by the computer, via the Windows Device Manager
  4. write a Visual C/C++ program to register the NIDAQmx.h and use the NIDAQmx.lib library. By the way. I found the files NIDAQmx.h and NIDAQmx.lib in the C:\Program Files x 86) \National Instruments\NI - folder DAQ\DAQmx ANSI C Dev\ that was automatically created for me when I installed LabVIEW on another computer in the lab m a few years ago.

  Please let me know if I missed something. In addition, if there is a code example for a simple task like this, it will be extremely useful.

  Moreover, the computer on which I am working on a Windows 7 and 9.3 DAQmx installed.

  Thank you!

  Fuh

  
  

• Trying to simulate the device USB-6366 (without success)

  I read through the tutorials DAQmx and MAX about the simulation of the device, but I can't yet find a way to effectively simulate the acquisition and generation of a signal using a device USB-OR-6366.

  I am a (given at the entrance of this VI) signal using DAQmx Write and then use DAQmx Read to read the signal captured from the internal memory of the card (which has a buffer of 32 MS). To do this, I created a task with DAQmx I feed in the writing block.

  I know that the approach is most likely wrong, but I can't understand not just how to do this in a simple way and documentation of NOR is anything but simple. All I want is to

  (a) test using 2 digital inputs to capture this signal by the device and then read what she has gained from its internal buffer

  (b) send the same signal to 2 digital outputs the signal output again.

  See you soon

  Yes! the simulation is designed to allow you to write a program and check that it works theoretically even if you do not have the material physically available. It has no interface programming to influence on the what the reading functions will return simulated data. And write the function has no notable effect anywhere, working as a receiver of data in nirvana. It is always useful because you can test software without getting all kinds of errors on the non existing hardware access attempt, but it has its limits, of course. However, a programming interface for manipulating that which and how the data are simulated, while it would be a very interesting feature, is almost certainly to complicated not only to implement but also to use.

• Rs232 USB drivers for xp, id device USB\VID_1A86 & PID_7523\5 & BD40FB & 0 & 1

  Wonder if someone can point me in the direction of a pilot to work under XP with the above usb to rs232

  ID of device USB\VID_1A86 & PID_7523\5 & BD40FB & 0 & 1 Please?

  Where did you finally find the driver? I need the same.

  Hi pardallas,

  Driver is from CH341SER.zip.

  A download site is at http://www.winchiphead.com/download/CH341/CH341SER.ZIP

  If this does not work, try a Google search for "CH341SER.zip."

  This driver works fine for me on several different machines under XP.

  Good luck

  Bob

• vSphere 5.5 using the uplink of LBT group that does not have a good way

  We use LBT since our recent deployment, which is new for us.  Everything seemed fine and dandy, until recently the VMs began dropping their connectivity to what looked like at random times.  The first fix out the door had to disconnect and reconnect the vNIC for each virtual computer.  Sometimes, it took a few tries before it worked.  We discovered that LBT moved VMS to the other group of uplink, which was a physical affair.  Unfortunately, someone didn't configure the port correctly on the remote switch, so while link came, he could not access the VLAN correct.  My question is, why the LBT would move virtual machines to an uplink group which did not have a good way?  He seeks only a physical link?  Looks like this problem waiting to happen.  Or, more likely, we have something misconfigured.  Any help would be wonderful, I don't like the idea to return to etherchannel or LACP with IP hash with blades chassis.  Thank you!

  My question is, why the LBT would move virtual machines to an uplink group which did not have a good way?

  Is that a "good path" can mean many different things in different circumstances of different points of view, if it's out of reach for LBT. It will be only on the physics of the status of the link. There is beacon probing too which can detect switch upstream outages but it can be used only with at least 3 vmnic uplinks and it has a few disadvantages, see:

  http://virtechgeek.com/2013/05/06/beacon-probing-vSphere-network-policy/

  http://thomaslowblog.blogspot.de/2011/10/vswitch-network-failover-detection.html

  You can use the dvSwitch health check feature to make sure that all the natachasery of all the hosts connected to a dvSwitch can access the same VLAN. It will not prevent LBT to move virtual machines, but it will at least raise an alarm if a bear cannot access a VIRTUAL LAN. Take a look at this article:

  http://wahlnetwork.com/2012/08/27/new-5-1-distributed-switch-features-part-1-network-health-check/

• measurement of input frequency TTL with sheet metal entered on a device USB 6363

  Hi all

  Is there a simple LabView vi to measure the frequency of entry TTL cable for the entrance/s, four counters available on a device USB 6363?  I have LabView 2014 FDS installed. I guess using 2 4 meters would be better than 1 for 32-bit resolution, correct?

  Thank you

  John

  Hi jac2015,

  There is an example of a measure of frequency located in LabVIEW help-> find examples-> material-> DAQmx entry and exit-> entrance of counter-> meter - reading pulse width and frequency (continuous) .vi

  Take a look at it and see if that helps. There is also a very useful white paper on considerations to make when measuring frequency, you can find here:

  «Measures of frequency: practical Guide»

  http://www.NI.com/Tutorial/7111/en/

  The main considerations is how often should the signal you want to measure?

  I hope this helps!

• What is a good way to use the queues for the model of consumers/producers?

  Hi all

  I am following the model of consumers/producers to use the queue to synchronize the following process: the producer is a loop to produce a number N, I will put each number generated in a table and after each 5 numbers generated, I put the table in the queue and pass it on to the consumer. I have to wait the use by consumers of the data and it will then remove the item from queue so that producers will have the chance to produce another 5 numbers. As I put the maximum size of the queue one, I expect that the producer and the consumer turns to produce / consume all five numbers and the opportunity to another. Here is my code

  

  When the checkbox is false, the code will be

  

  For the first 5 numbers, product will generate every thing right and put it in the table, and it's going to pass the array to the quere so that the consumer will have the chance to loop through the table. I except the procude loop will continue only when the queue is available (i.e. all items are deleted), but it seems that once the consumer starts the loop loop of the product will continue (if the indicator x + 1 and x 2 will be changed to numbers). But this isn't what I want, I know there must be something wrong, but I can't say it is.

  dragondriver wrote:

  As you say in 1, sequency structure to enforce the order of execution, that's why I put it here, in this example, the simple question, I replace the complete code with increase in the number, in the real case, the first markers + 1 and + 2 must be performed in this order.

  Mikeporter says:
  1. get rid of all the structures of the sequence. None of them are nothing but apply a work order which would have been the same without them.

  So even if you delete the sequence structure, there will be a fixed & defined order and it is because LabVIEW follows the MODEL of FLOW OF DATA.

  Data flow model (more precisely in the context of LabVIEW): a block diagram node runs when it receives the required inputs. When a node is running, it produces output data and transmits data to the next node in the path of the data stream. The flow of data on the nodes determines the order of execution of the VIs and functions on the block diagram (click here for reference).

  Now in your code, just remove the sequence structure will not make you order will be going to stay the same, but you need to do some very minor changes (as thread of the error in loop, before that he go to the node "Élément Dequeue").

  Come to the main point: it's a good way to use the queue for the consumer/pmodel that?
  The model you are using (and qualifying as consumer/pmodel) is much too deviated from the original consumer/pmodel which model.

  dragondriver wrote:

  For the second, Yes, it's my fault for delete, though. I'm actually the example of model of producer/consumer design pattern, but I do not pay attention to the while loop in the part of the consumer.

  While loops (two producers & consumers) are the essential part of this architecture and cannot be deleted. You can start your code using standard model.

• Of device USB Brother writter

  Hola, Necesito UN instalar el driver del device USB writter, UN modulo lectura-escritura tarjetas para las maquinas coser brother.

  Tengo el disco instalacion original, pero me not of as no encuentra el driver.
   

  Hello

  You created this thread in the English version of the Microsoft Community. Please could you click on the globe icon to the world at the bottom left of the screen and then choose your preferred language. Now create your thread again.

  

  If you can't find a suitable language, please go here:

  http://support.Microsoft.com/common/international.aspx

  for other international support options.

  Thank you.

• any USB device USB not Republic United Nations notes senza

  Without some special USB device USB no Republic - Cosa fare UN notes? Grazie leopoldo Rogante

  Hello

  This is an English language Forum.

  Please go to

  http://answers.Microsoft.com/en-us

  to select your language from this link English 

  Don

  Questo e UN forum in lingua inglese.

  If get di andare

  http://answers.Microsoft.com/en-us

  by rates the lingua da questo link English 

• Cannot start device USB (code.10) error

  Original title: device usb ayre

  Cannot start this device (code 10)

  Hello

  1. what operating system is installed on your computer?

  2. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps from the link below and check if it helps.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers: http://support.microsoft.com/kb/943104

  Hope this information is useful.