GPIB pci windows xp

Similar Questions

• Cannot configure 488.2 GPIB PCI card: serial number is grayed out.

  IM new here, I have read 102 posts to try to solve this problem, very few are maybe relevant but I'm grabbing for straws.

  System Specs:

  IBM 300GL PII 750

  256 RAM

  You can stop laughing now.

  GPIB PCI (provided by Mitutoyo for a Bright - A910 CMM Mitutoyo).

  This card worked on this system, due to a peripheral on the other a re - install the GeoMeasure and GPIB card was required.

  Nothing has changed other than uninstalling/reinstalling the software!

  I followed the instructions of these two KB and niether worked:

  1 greyed out serial numbers for cards PCI-GPIB under Windows NT

  http://digital.NI.com/public.nsf/3efedde4322fef19862567740067f3cc/d4369b86117a0e15862567a90051b27c?O...

  2-PCI-GPIB 'edge of the class driver loading failed' under Windows NT 4.0

  http://digital.NI.com/public.nsf/WebSearch/91C0A67CB1993B268625648200769FCE?OpenDocument

  Note aside; Agenda requires you to disable 'Plug and Play' (P & P) services, when you need to plug and play data to see conflicts.  If "P & P" is disabled there is nothing slot the tab "Devices". How does it work?

  I ask pilot was sent through this site, I don't really have the time to wait for a response.  So I hope that others have found an asnwer.

  Best regards

  Rick

  Scott

  Thanks for the reply, it was late last night when things got sorted and I forgot to reply to this topic.

  A form of engineering applications OR provided excellent assistance on this by e-mail, after several hours, it was determined the card cannot or is more than likely not a map OR but a card cleaner Mitutoyo.

  Mitutoyo has been kind enough to leave out all pertinent information on the card to be of any help for the uninitiated, thanks a lot.  Allthough Mitutoyo delivered the software installation OR with the software package here it turns out that you do not install the software.

  Brilliant!

  The configuration is done via TSNS (Top Secret Ninja Stuff), or information without papers.  More brightly...

  And they want to upgrade me to a more recent software, DO NOT set.

  Unfortunately, I assumed that the card was a material, OR because of the automatic install program supplied with the Mitutoyo software.

• How to make calls to my board NI GPIB-PCI using VC ++ 1.52?

  I'm making calls to my new NI GPIB-PCI board using an application which was developed using MSVC ++ 1.52 on a Windows 98 operating system. With the help of MAX I can see the Board of Directors and the instruments on the GPIB communication works fine but when I try to use my application it tells me that it cannot find the device. I think the problem is that the application cannot find the GPIB Board. I decided to rebuild the application using the new API, but then I realized that the new API is for 32-bit environments. 1.52 MSVC ++ is a 16-bit environments. Any ideas how I can make this happen?

  Thank you

  
  

• HP dc 7800 how can I install the driver for serial port pci Windows 8.1

  HP dc 7800 how can I install the driver for serial port pci Windows 8.1 Please help

  Hello:

  Download and install the W7 AMT driver.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3459243&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dvc_78665_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Can I use a GPIB PCI instead has a HP 82350

  Can I use a card NI PCI-GPIB IEEE 488.2 in instead of a map of 82350 HP.  I want to configure a 5890 II to a PC running Windows 2000 with the Chemstation B02.01 software.  Sorry - Posted two places.

  Yes, you should be able to. The two cards are GPIB controllers. Just make sure you install the NOR-488 driver for your operating system.

• Satellite R630 - missing device PCI Windows XP driver

  Hello

  I lowered my Portege R630-138 of Windows 7 to Windows XP Prrofessional. I solved all the problems of bar one device driver. I have a PCI device showing in the hardware Manager that has no driver. I used all the drivers on the Toshiba site. How can I know what the device is and find a driver?

  Thank you

  Craig

  Hello

  Theoretically peripheral PCI can mean anything so first of all, we need to identify which device it is before we know which driver, we need to install.

  In your case, I read this article, how to identify an unknown device:
  How to identify an unknown device (e.g. LAN wireless module)?

  After that, you can find on the official website of Toshiba for a driver.

  Check this box!

• Cannot configure GPIB in Windows Server 2008

  I installed the version 2.8 IEEE488 driver on a Windows Server 2008 computer.  I have successfully added a GPIB-ENET under Measurmeent and Automation Explorer interface; However, he does allow me to change the configuration of the interface.  I get the message "the GPIB Interface Properties cannot be changed by an administrator" in the status bar.  I am the administrator for this computer group.  Does anyone have any suggestions?  Is there a different usergroup that I need her?  File permissions need to be addressed?  Is there another configuration setting that I need to do?

  I solved the problem.  Run as administrator.  Not enough coffee this morning.

• GPIB PCI does not connect to agilent 35670 A * IDN? query does not

  Newbie here. I try to get the agilent 35670A to transfer data using labview with gpib problem lies in the fact that I can't start because my pci card does not recognize the agilent. Ive downloaded a driver ahead of the hand. measurement and Automation Explorer is not with the entrance to the correct address. I am at a loss of where to go next.

  It is simply not true. You do NOT set the address of the GPIB controller at the same address for any instrument that you have connected. You should have just left alone to the default address of 0. I would say that finding a GPIB tutorial. Each device on the bus must have a unique address.

• With the help of VB6 GPIB in Windows 7

  I have an application that is in VB6 but running Windows 7. Is there another DLL should I use in this case? Windows 7 won't let me save the gpib - 32.dll origin...

  You need a version compatible with windosw 7.

• Input device multimedia video controller/PCI Windows 7

  Multimedia video Controlloer and PCI input devices have a yellow question mark in device, "other devices Manager."
  I can do something to solve this problem. I'm not sure what kind of video card, it is, but I think its Nvidia p300 is what it says on the card when I looked...
  Then when I go to download a driver from nvidia, they say, I already have the update drivers... I do not understand

  Information on the site with this driver:
  
  Supported operating systems: Editions 32-bit and 64-bit Windows 7 RTM / Vista SP2 / SP3 of XP

  If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

  If your issue is resolved, please indicate then your wire is with solution.

• ThinkPad e430 unknown peripheral PCI - windows 7 ultimate

  Hello

  I bought a new E430, installed windows 7 ultimate 64-bit

  I installed all the drivers and all works well... I still have an unknown device (PCI)... I think it's VGA... but I installed the card driver intel HD.

  Here is the info:

  The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.

  To find a driver for this device, click Update driver.

  device instance path:

  PCI\VEN_10EC & DEV_5229 & SUBSYS_500017AA & REV_01\4 & C587ECB & 0 & 00E0

  Hardware ID:

  PCI\VEN_10EC & DEV_5229 & SUBSYS_500017AA & REV_01

  name of the physical device the object:

  \Device\NTPNP_PCI0016

  Help, please.

  Sound of the Realtek PCIE card reader.

  Driver should be present in SWTOOLS\DRIVERS\MultiCard

• accidentally uninstalled audio PCI windows 7 hp. How to recover

  I downloaded some stuff from the internet and realized that I don't want. now I jdon can't have audio on computer since I uninstalled the IDP

  Can someone please. I do a system restore, but I get an error. I disabled my kaspersky thought that is why, but it's not.

  Thank you

  Nicole

  Wow - the next time find someone else to guide you through a system cleanup.

  You will need to download (web site according to the model of your machine more likely) the drivers of devices for your device audio/HiFi from the manufacturer of the system and install.

  Why did you disable your antivirus?

• Could not receive data from GPIB system controller (PCI card of NI - 488-2)

  Hello

  We create a daughter card that will allow our product shipped to communicate via GPIB. This girl GPIB card must be able to receive the SCPI message send by system GPIB controller and reply to the message. In my current configuration, system controller is a card PCI of NOR-488. 2 installed on a PC running Windows XP.

  On the side of card GPIB girl, we have NAT7210 with 75160 and 75161 transceiver chips. NAT7210 is connected to the interface of static memory controller (SMC) an Atmel ARM9 embedded Linux OS running. We use the Linux GPIB library on sourceforge - http://linux-gpib.sourceforge.net/ .

  For now, chip NAT7210 initialization stage seems to be successful. Using Measurement & Automation Explorer software that comes with the NI GPIB PCI card, it is able to detect the daughter GPIB card; the cushion and the sad values are correct. However, chip NAT7210 has failed to receive the * IDN system controller message.

  Here's what I did to initialize the NAT7210:

  (1) set 0 x 99 in SPMR register. To make sure that we are 7210.

  (2) in AUXMR the value 0 x 02 (chip reset at the controls). To affirm the message local pon.

  (3) skip the step that defines the ICR and registered ICR2 because we use the default clock 8 Mhz.

  (4) the value 0 x 31 (addressing Dual mode) in the register of the ADMR.

  (4) together in ADR 0x01 to register.

  (5) contained SPMR 0x40. Initial response of series. I don't know what are reasonable values to settle here.

  (6) together to register 0x07 in hidden PPR. Do not participate in the parallel polls.

  (7) set TASKS and NTNL bits in the AUXRG register.

  (8) the value 0 x 51 (hldi to the order) in the AUXMR register.

  (9) to activate the interruptions; IMR0 = 0xC5, IMR1 = 0xBF and IMR2 = 0x4F (no plans for DMA transfers).

  (10) the value 0 (command pon) in the AUXMR register. Final step.

  The NAT7210 Linux configuration file content:

  minor = 0

  board_type = "gpib".

  name = "gpib0.

  PAD = 1

  sad = 96

  Timeout = T3s

  EOS = 0x0a

  together-reos = yes

  all-bin = no

  together-xeos = no

  together-eot = yes

  base = 0 x 70000000

  IRQ = 45

  DMA = 0

  master = no

  Any ideas on what could be the reasons NAT7210 has failed to receive the * IDN system controller message?

  Steve, thanks for your comments.

  It turns out that the deactivation of functions that print messages in the debug library has solved the problem of reception.

• OR MAX see GPIB controller/board of Directors, but crashes on test/Scan troubleshooting

  Hello

  I have a new PC (Win7 64 bit) with a new GPIB PCI - E card and NI-VISA 14.0 (later). I can't get the map to 'do' something - he's not troubleshooting auto test, or search for instruments, and the ibfind in an interactive control command does nothing (they are all "don't hang up" no error reported). What is happening with two identical machines, each with the PCI-E card. My 6 monts test machine there is works very well, but it is 32 bit and has a different chipset/firmware of the provider (which was not planned, we ordered the same model, but the seller seems to think that it's little, they kept the model the same number).

  Any ideas on what to do? I demoted NI-VISA a couple of times already, and Windows reports gladly driver card / work properly. GPIB options all seem normal in case of default (GPIB0, controller of system activated, etc.).

  Thank you very much for your suggestions!

  -Rick

  Hi rnelsonee,

  Make sure you also have the NOR-488 driver. 2-day so you can communicate with GPIB devices correctly. You can follow this link to download.

  http://www.NI.com/download/NI-488.2-14.0/4802/en/

  If you still have questions, could you let me know what kind of errors you get when you fail the self-test NI Max? All codes error or screenshots you can provide will be useful. Thank you.

  Paul C

• Slow data transfer during the reading of the GPIB (Horiba CCD 3000) device

  Hello to everyone.

  I'm trying to connect with a CCD camera (CCD 3000 - company Horiba (formerly Jobin Yvon)))

  The connection is made on the GPIB (PCI)

  The CCD device is old enough and will not support orders GPIB standard (p. ex. * IDN?)

  The problem I have is that after I take a picture, when I want to read data from the CCD

  It takes about 10 seconds before arrived it all the data to the computer

  the delay is proportional to the size of array of pixels:

  When I take the data of the entire area of the CCD (1024 * 256 pixel * 16 bits = 512kB)

  It takes 10 seconds

  When I consider 4 x 4 pixels 1 pixel (this is done by the hardware) (256 * 64 pixels * 16 bits = 32 k) it taks about one second

  What can be the cause of this kind of problem

  How can I solve it?

  Thank you

  As you say, the camera is quite old.  Maybe 50 kB/s is the maximum data rate (probably very 56 Kbps).