grabbing the mouse usb speed

Similar Questions

• Continuous monitoring of the mouse (USB) with fixed sampling rate (500 Hz)

  Hello

  I'm quiet new to LabView and there are simple applications that I am still unconfortable with. I have to constantly monitors some analog channels to my DAQ and simultaneously to the value of X and Y of the mouse (USB). Signal acquisition of surveillance data are a simple procedure, but how to capture X and Y of the mouse as contibuous undulations sampled 500Hs (for example) so I can merge them to signal data acquisition? What is the synchronyzation of the signals of the acquisition of data and the extra-DAQ chanels created with data from the mouse?

  Thanks a lot for your help and your patience!

  Olivier

  Quick explanation:

  When I said "throw a timed loop around this" what I really wanted to throw a loop timed around "acquire input data.  I don't know how it applies to these screws (it certainly when you talk about material!), but generally when talking to a device we open/close only once and loop on the functions of acquisition/generate.

  

  -memoryleak

• Satellite A200 - after the mouse USB Vista updates no longer works

  After installing the latest updates Vista (KB938371), I discovered that my mouse USB (Genius Traveler) does not work. I can't restore the system (mistake) and this update cannot be removed. Other (flash disk) USB devices work correctly.

  Could someone help me? Thank you.

  Problem solved, I found this on another forum

  + Hi all, +.

  + I found the solution on another forum (forget which) and published this solution in multiple threads. The problem is, as indicated, a Human Interface Device in combination with update KB938371. After installing it, my usb mouse stopped working. Just go to the--> HID Device Manager - devices--> unknown device and looking for drivers. Vista won't find any drivers online, so you must get the drivers on your computer. The location of the driver (in most cases) will be C:/Windows/Winsxs. You will get a window saying: "this is an unsigned driver blah blah blah". Just install the driver. The mouse worked for me (even without reboot). +

  + OS: Edition Vista Home Premium 64-bit. +

  Dr. +

• Vista cannot find the mouse USB - Satellite P100 - 434 PSPADE driver

  * Need help to install a mouse optical usb on vista32 *.

  I have two mice, two optical usb, 1 wired and 1 wireless. They are the two plug-and-play so when to plug their vista must locate and install the right drivers automatically... it can't.
  Vista search drivers on the disk and hard on the internet.

  "" looking software... looking for an online software.. "."

  Then says:
  "Windows encountered a problem installing the software driver for your device."
  Windows found driver software for your device but encountered an error trying to install it.
  USB Human Interface Device
  The system cannot find the specified file. »

  They are plug-and-play and just install automatically, there is no driver CD that come with the mouse.

  I have a Toshiba Satellite PSPADE P100-434 with Vista 32 bit purchsed new 2 weeks ago.

  Help, please... Thank you!

  It's strange, because the standard optical mouse should be installed without time and without the need of specific drivers.
  Did you check the homepage of the manufacturer for drivers?

  And have you installed all the latest updates for microsoft windows and SP1?

• How can I change the mouse '-scroll-speed of the wheels in Adobe Reader / Acrobat Pro?

  While I am a student, I read a lot of books to the computer with Adobe Acrobat, and sometimes I just skim the pages to find something. What keeps me boring, that although my speed is set to fast in Windows settings, whenever I open a pdf file and zoom in a bit to adapt to changes in Adobe screen, scrolling speed wheel of my mouse to very slow.
  It seems to me, if I would try to scroll in this situation through a say that only 20 pages ebook it could last for years before reaching the end of the pages...
  
  Any suggestions why or how to change this behavior?

  Here's what I did:

  1) update your rate of scrolling the mouse.

  (2) in order to actually use my scroll rate, I go to select 'View-> Page Display-> single Page continuous' rather than simply 'single Page '. Œuvres fast scrolling.

• Satellite Pro 6200: message of USB on the faster USB speed

  When I plug a device into one or two of my USB ports on my 6200 Pro Satellite laptop computer it gives me a message saying that he could perform quickly, but it does not guide me on how to do it. Any ideas on this subject?

  This message means that you have connected a fast USB (Version 2.0... or an external hard drive) to a USB (Universal Serial Bus) port that does not support the USB 2.0 standard.

  This message appears on older laptops, that were not equipped with the latest hardware USB 2.0. There is no way to upgrade your laptop to USB 2.0, unless you buy a USB 2.0 card (PCMCIA USB2 adapter) external

  Speed of the USB Version 1.0 (max 12 Mbit/s) to 2.0 (480 Mbps) is huge.

  Concerning

  chain

• EXTREMELY slow mouse scrolling speed

  Hello, I was faced with a problem with my iMac where the mouse scrolling speed is very slow.  It's so slow that my finger feels bad the amount of scrolling, do I just go to the bottom of an average Web page.  I use a third party mouse, but I think it's a problem with my iMac because when I plug the mouse on my Macbook Air it can scroll to normal speed.  I tried to adjust my speed in system preferences, but it does allow me to increase my speed to scroll beyond the 6th tick and even when he is sure the scrolling speed is still extremely slow.

  It may be worth noting that I've just updated my iMac to El Capitan of Mavericks (so it has not been updated in a while).

  Also, the mouse is a Logitech wireless mouse.

  Please help me find a way to increase my speed.

  I found a solution!  I just installed the latest version of Logitech Control Center and it fixed the problem.

• The mouse and the keyboard does not - start or boot (s) failed to load i8024 system

  original title: salvation. Mouse and keyboard does not.  startup or start-up system (s) failed to load i8024.  ?? 1000 thank you!

  Sorry, don't know what information is needed. Still 1000 thanks.  XP family; the mouse usb.

  The following should be helpful.

  http://social.technet.Microsoft.com/forums/pl-PL/itprovistahardware/thread/cb03f7ec-95c9-406e-af07-cff86eaa9ee0

• T61, the mouse cursor will move automatically.

  My OS is Win7.

  If I do not use the mouse (touchpad and pointer) for about 1-2 minutes, mouse cursor will pass to the upper left and from left to right, then moving from right to left, again and again, until I have the mouse.

  I tried to disable the touchpad and the pointer in the BIOS and use the mouse usb external, the exsits yet problem.

  It drives me crazy. Is that someone can help me?

  I fixed it. It is caused by a software.

• Qosmio G does not recognize the mouse using two left USB ports

  I'm right handed so I naturally put my optical mouse Saitec in the port of the right hand.

  The other day I plugged it in the ports of the two left hand and the machine did not recognize the mouse.
  He went through the process of installing the drivers (even if it was done a few weeks ago, when I plugged in the port of the right hand)

  In any case the mouse doesn't at all plugged into ports on the left side.

  Does anyone have any ideas as to why what is happening?
  Look of Sean.

  Hello

  Have you tested the two left with other USB devices USB ports. That is to say USB flash stick?
  Maybe you should do this to see if it could be a defective USP port.

  But I recommend to test this;
  First disconnect all USB devices
  Then go into the Device Manager and all the USB host controller and hubs USB remove from the list of devices.
  Close all windows and restart the laptop.

  Finally the operating system should recognize the new devices (USB ports) again.
  Connect a USB device to one of the ports on the left and check if it would work.

  Good bye

  PS: What Qosmio do you have?

• Equium A60 issue of the wireless USB mouse

  I bought 3 optical mouse for my equium A60. The first 2 have worked for a short period, but then appeared to be very erratic, beating on the entire screen and the slightest touch. I just bought a third and spend money on it to combat this problem, but it's always like it. It's a belkin wireless optical mouse. The connection is USB and I have no driver to install. It flies just all over the screen completely uncontrollable. Please can someone help.

  Hello

  Have you checked the pointer options in the properties of the mouse?
  In my opinion, you should try changing the query options to slow down the pointer options.
  In addition, improve it the accuracy of the pointer must be marked.

  Good bye

• Errors in 'Speed' while accessing the mouse click events?

  Hello

  I built a software where it has a CVI callback function registered on the Panel. The function tests whether two cases, the first EVENT_LEFT_CLICK and then EVENT_LEFT_CLICK_UP. The user is supposed to keep the click button for some time (~ 1 second), and there is no problem. However, I have found that if by mistake (that users commit often) multiple rapid clicks are made, sometimes the click down the piece of event (EVENT_LEFT_CLICK) of the code is not read. I reduced the likelihood of this problem of the speed setting of double click (on Windows) to the maximum.

  I think that if I could eliminate the double click event, this problem would be resolved almost completely and only limited by the speed at which the processor can update mouse events.

  Hope you understand my problem.

  Thank you!!

  AUTOSOLVED.

  Thanks to a guy who posted his own solution on a Windows forum, to 'disable' the double click. Just change the HKEY_CURRENT registry value > ControlPanel > mouse > DoubleClickSpeed to 1. What makes the double click speed so fast that you can access virtually every user actually simple clicks.

  After doing this, in order to apply the registry editing, I ended explorer.exe running and he raised through windows task screen. However, change, this applies to what I opened the mouse Panel (without change or apply anything from there).

• Speed of the Ethernet USB adapter

  Hi guys, this is my question.

  I recently switched to a network of 300 Mbps, and I noticed that my wireless and ethernet controllers (RealTek Semiconductor RTL8101/2/3 Family Fast Ethernet NIC / network RealTek Semiconductor RTL8188E Wireless LAN 802.11n PCI-E adapter) have a maximum speed of 100 / 150 Mbps.
  Can I buy an adapter USB Ethernet Gigabit(e.g. this one) for better performance?
  Can I change my wifi controller with

  I think 300 Mbit/s is the speed of the internet data outward, the WAN connection. I'll take the side LAN is gigabit ethernet, and Yes you can get near that speed using a gigabit usb adapter. The gigabit usb adapter will allow internal (LAN) transfer of data to somewhere between 5 - 10 times faster than fast ethernet.

• The mouse on the T610 SmartZero speed

  In our case, we use HP smartZero (Z6X44017) on HP T610

  All of our users are complaining that the response of the mouse is too fast.

  I tried to adjust the mouse speed in windows 7, but that did not help either one.

  This happens to all cables, wireless mounses.

  The WES7 users do not complain this topic.

  Antoine solution or advice?

  You should be able to adjust the speed on the client itself.  If you go on devices and mouse there should be a few speed settings to adjust.  Not in front of a SmartClient now for more detailed instructions, but if you can't find it let me know.

• USB device not recognized (Nothing plugged and the mouse does not)

  My mouse (microsoft) wireless worked well until what within hours.
  then I said to unrecognized USB device
  The port works, but for some reason any
  the mouse is not, went bought another mouse and still getting the same message.
  Plus I get the USB device not recognized pop up, same
  Tho, nothing is plugged into one of the USB ports.
  Any suggestions on how to solve this problem

  Computer brand and model?  Windows OS?

  Open the Device Manager

  Click on the + sign next to USB controllers

  Do you not see that unknown device listed?

  Right click on the playlists of USB root hub

  Select uninstall

  Close Device Manager

  Restart the computer to Windows reload the drivers

  USB is now recognized?

  If failed, shutdown computer.  Unplug it from the electrical outlet.  Leave unplugged for 1 to 2 minutes.  Plug the unit in and restart the computer.

  USB is now recognized?

  How to troubleshoot USB device problems that can occur after a laptop computer that is running Windows Vista recovery from sleep or standby extended

  http://support.Microsoft.com/kb/953367

  Windows Vista does not recognize a USB external optical disc drive when you reconnect the USB optical drive to the computer drive

  http://support.Microsoft.com/kb/944292

  Run the System File Checker

  Right-click on command prompt and select run as administrator

  Type sfc/scannow

  Press enter

  Note: there is a space between sfc and / scannow

  How to analyze the log generated by the SFC Scan file:
  http://support.Microsoft.com/kb/928228