Update Bios of Windows 8 for m2n61-ar

I need an update of the bios that works with windows 8 for m2n61-ar motherboard HP pavilion slimline gx615aa. All I can find is one that works with vista. I've updated this computer to windows 8, but it works always the 5.09 v of bios and I belive the most recent bios is v5.18. If someone can direct one that works with Windows 8 or a bootable update me please.

Advertisement

Here are the specifications of your desktop HP Pavilion Slimline s3300f. According to the specification, this model was presented for sale on or around November 26, 2007 and comes with Windows Vista Home Premium 32 - bit. HP supports only this computer in its original configuration and only provides updates of BIOS for use on the computer that is running Windows Vista. HP does not provide a version of the update of the BIOS for this computer that is compatible with Windows 8 or bootable.

You can update the BIOS installing Windows Vista on a disk replacement or using your recovery HP with a hot spare disks. By doing this, you will not have to reinstall Windows 8 after the update. You can also try the true correct BIOS since the BIOS HP softpaq and create media bootable with the BIOS and flash of routine. THIS IS NOT RECOMMENDED! You assume all risk of damage to your computer.

Please send Bravo

Tags: HP Desktops

Similar Questions

  • Dell Vostro 5470 not get Dell Logo after update bios in Windows 10

    Dell Vostro 5470 not get Dell Logo after update bios in Windows 10.

    Laptop computer has restarted:

    1 Fireed power led,

    2 Powered hard drive for 2 seconds to turn it off.

    3. stops...

    No Dell Logo, no beeps, can't go in the Bios.

    Test LCD works OK.

    Remove the module of Ram, power on and listen to beep

    Pressing the END key and power for laptop has no effect.

    Any idea?

    Yes. I did it.

    Laptop have bios Phoenix.

    Phoenix Bios have restored the USB Flash procedure.

    This procedure to restore the BIOS:

    1. download USB flash less than 4 GB.

    2 format in FAT.

    3. get your flash update of the Dell store - xxxx.exe

    4. run cmd.exe and in the command prompt, run /writehdrfile xxxx.exe

    5 extracted copy of Bios.cap for the flash player.

    6. turn off the power to the laptop.

    Next 7,8 step may not be necessary but I did it.

    7 disconnected all perihpericals with battery and charger.

    8 disconnect the HARD drive

    9. connect the USB on the laptop on the right side.

    10 press and hold the END

    11, Pluged the power cable and the relase the END key 1 second after the power cord is in.

    12 USB led on stick flashed quickly and we see the process of recovery of the Bios on the screen.

    13. After finishing laptop restarts and worked well.

  • Portege M800 - update BIOS stucks - Windows 7 32 bit

    Hello world!

    I have a problem.
    I downloaded the update to the BIOS of Toshiba Hompage.

    The update started successfully, but the point of "BIOS News Flash ' to 'treatment block 26 of the 33"the stucks updated!
    I'm waiting for almost 2 hours, but nothing happens.
    My screen freezes, I can't move the cursor, the clock shows the time even... then nothing happens...

    Is this normal?
    I don't think, but it's my first update of the BIOS, so I'm not really familiar with it...

    Anyone have an idea?

    It would be great help!
    Thank you!

    Hello

    It's different not a common BIOS update process
    The update of the BIOS should not take much time.

    In your case it is possible that something was wrong during the flashing process and module ROM was not properly flashed.
    I think that you are in difficulty and in my opinion, only the ASP technician would be able to help you.

    The BIOS ROM must be flashed again using a crisis procedure and this can be done by a technician of the ASP.

    Welcome them

  • Mini L9W - B satellite - cannot update BIOS running Windows 10

    Click Mini L9W - B with Windows 10.
    Everything works fine, but I can't update the BIOS to 5.20, via the Service Station or for download on the Toshiba site.
    Process gets as up to now by clicking on Yes to UAC... then nothing.
    Any suggestion is appreciated.

    Thank you.

    I have the same problem, also with Win 10.

    Meanwhile, the keyboard no longer answers.

  • Pavilion of the bios of windows 7 for the Elite m9350f

    I have fixed my PC after a hard disk crash when installing a new hard drive with a new installation of windows 7 by replacing the Vista which is preinstalled.  My PC records many cases of event ID 12 indicating "the platform firmware corrupted memory through the transition from the previous system power. Please check updated firmware for your system. "I guess that means to search for an update of the motherboard BIOS?  Motherboard M2N78 - THE (HP P/N 489363-001 Rev A01), currently has a review of BIOS 5.18 dtd 11/04/08.  Load the terms of the most recent update of BIOS revisions 5.29 5.08 and 5.16 block.  I don't know what BIOS my PC needs to use and would appreciate some advice on how to fix the error event ID 12.

    Thank you

    Needsumhepvwrote... I want to run the mc in ahci mode and I want to know if it's ok to just go into the setup and upgrade the latter without having to reload vista. I heard some people that you cannot do this and others that it's ok. Just try to make sure.

    I tried RAID on AHCI change on my p6130y and the computer refuses to start and blue screens. This configuration change can work for you, but then again it can't be. You need to just try and see. If it won't start after changing the setting, simply change this back.

    Honestly, you must assign the SATA RAID, AHCI or IDE controller before installing the operating system. This way Windows is configured correctly at the beginning of the installation.

    Please send BRAVO

  • How update BIOS, not windows

    Hi hp forum, I have the version of the BIOS F.2C and I'd like to update F.30, but I don't like windows because it's too uncertain and slow.

    Thank you.

    Use of GNU/linux is too much beter http://www.whylinuxisbetter.net/

    I have already solved my problem, linux is the best thanks for answer you

    http://www.linuxinsight.com/how-to-Flash-motherboard-BIOS-from-Linux-no-DOS-Windows-no-floppy-drive.html

  • BT not detected after update BIOS and windows 8.1 & wifi adapter with envy J000 Touch series (J001tx)

    Hi, I have an Envy Touchsmart J001 TX laptop.  I've upgraded to 8.1 Windows a few days back and my pc was working fine. Yesterday, my WIFI and Bluetooth stopped being detected.

    I checked Device Manager and it does not show the adapters. My system has BT Ralink and Realtek wifi b/g/n.

    Restart the system, WiFI present themselves and worked normally, but on next reboot disappeared again.

    The physical plane mode button is orange and pressing or off change in the status of shows like airplane on or off but the notification area icon mode shows no change.

    The network and sharing Center shows not router WIFI in the settings of the card and even the menu of configuration of Windows 8 don't tell no detected wirelessadapter.

    I've updated my drivers and even my BIOS. Earlier I got the version of BIOS INSYDE F.24 and current installed BIOS is INSYDE F.53. Here is the log file in the folder SWsetup containing the unzipped BIOS file. I think that the BIOS is not installed correctly. Please analyze the log file and do not tell if you see something wrong.

    Has anyone else had a similar problem with the update of the BIOS, or with WIFI after Win 8.1 update?

    -Log started: 2014/04/16 19:50:11
    Initializing...
    Log file: c:\SWSetup\SP65654\InsydeFlash.Log
    Settings file: c:\SWSetup\SP65654\platform.ini (found)
    Executable: c:\SWSetup\SP65654\InsydeFlash.exe
    Version: 4.5.6.1 build: InsydeFlash
    Date: Mon 21 Oct 13:11:30 2013

    Resource file: c:\SWSetup\SP65654\iscflash.dll (load)
    Application name: InsydesFlash
    Information of the operating system: Microsoft Windows 8 - supported
    M - FD: 0 0 0 2 does not match FFFFFFFF & 1963103 C! = 1962103 C
    M FD: Match!
    M - FD: FD name 01966.fd
    IHISI Version: 204
    M - FD: 0 0 0 2 does not match FFFFFFFF & 1963103 C! = 1962103 C
    M FD: Match!
    M - FD: FD name 01966.fd
    sH19Infor.dwBootBlockInfo: 10 d
    Check of sign of starting block: 1
    The status of function block start: 4
    Lock status of the EC: 8
    Sign checks number of items: 0
    BBL level: 2
    M - FD has achieved:
    01966.FD
    Offset: 7380688
    Allow Version: 000, Dex: 0
    Current version: F.24, Dex: 3876
    Current BIOS version is greater than the version installed in the Ini.
    SearchVolumeFileAndCreateDirectory
    SearchVolumeFileAndCreateDirectory
    SearchVolumeFileAndCreateDirectory
    SearchVolumeFileAndCreateDirectory
    SearchVolumeFileAndCreateDirectory
    SearchVolumeFileAndCreateDirectory
    SearchVolumeFileAndCreateDirectory
    M - FD has achieved:
    01966.FD
    Allow Version: 000, Dex: 0
    Current version: F.24, Dex: 3876
    Current BIOS version is greater than the version installed in the Ini.
    Partition: 1 WMI 0x0D: 1
    Check the package: 1
    Sign of the BIOS: 1
    BIOS size: 0 x 00800000, SHA1 sign size: 0x00000000, SHA256 sign size: 0x00000100
    Sign of the file: 1
    Open file c:\SWSetup\SP65654\01966.fd
    No sign of present
    Reading 8388608 bytes of the file starting with 0...
    The BIOS image size: 8388608 (0 x 00800000)
    sH19Infor.dwBootBlockInfo: 10 d
    Check of sign of starting block: 1
    The status of function block start: 4
    Lock status of the EC: 8
    Sign checks number of items: 0
    BBL level: 2
    Current BID: 0008EFA0, new BID: 0008EFA0 size of BIOS: 00800000
    non_shareEC Ec starting address: 00000000, end of Ec address: 00000000, current size: 00010000, new size: 00010000

    Preparation stage

    Error code: 3010 (0x00000BC2)
    Cleanup phase
    Step completed
    -Newspaper arrested: 2014/04/16 19:50:55

    -Log started: 2014/04/17 22:05:35
    Initializing...
    Log file: C:\SWSetup\SP65654\InsydeFlash.Log
    Settings file: C:\SWSetup\SP65654\platform.ini (found)
    Executable: C:\SWSetup\SP65654\InsydeFlash.exe
    Version: 4.5.6.1 build: InsydeFlash
    Date: Mon 21 Oct 13:11:30 2013

    Resource file: C:\SWSetup\SP65654\iscflash.dll (load)
    Application name: InsydesFlash
    Information of the operating system: Microsoft Windows 8 - supported
    M - FD: 0 0 0 2 does not match FFFFFFFF & 1963103 C! = 1962103 C
    M FD: Match!
    M - FD: FD name 01966.fd
    IHISI Version: 204
    M - FD: 0 0 0 2 does not match FFFFFFFF & 1963103 C! = 1962103 C
    M FD: Match!
    M - FD: FD name 01966.fd
    sH19Infor.dwBootBlockInfo: 10 d
    Check of sign of starting block: 1
    The status of function block start: 4
    Lock status of the EC: 8
    Sign checks number of items: 0
    BBL level: 2
    M - FD has achieved:
    01966.FD
    Offset: 7380688
    Allow Version: 000, Dex: 0
    Current version: F.53, Dex: 3923
    Current BIOS version is greater than the version installed in the Ini.
    SearchVolumeFileAndCreateDirectory
    SearchVolumeFileAndCreateDirectory
    SearchVolumeFileAndCreateDirectory
    SearchVolumeFileAndCreateDirectory
    M - FD has achieved:
    01966.FD
    Allow Version: 000, Dex: 0
    Current version: F.53, Dex: 3923
    Current BIOS version is greater than the version installed in the Ini.
    Partition: 1 WMI 0x0D: 1
    Check the package: 1
    Sign of the BIOS: 1
    BIOS size: 0 x 00800000, SHA1 sign size: 0x00000000, SHA256 sign size: 0x00000100
    Sign of the file: 1
    Open the file C:\SWSetup\SP65654\01966.fd
    No sign of present
    Reading 8388608 bytes of the file starting with 0...
    The BIOS image size: 8388608 (0 x 00800000)
    sH19Infor.dwBootBlockInfo: 10 d
    Check of sign of starting block: 1
    The status of function block start: 4
    Lock status of the EC: 8
    Sign checks number of items: 0
    BBL level: 2
    Current BID: 0008EFA0, new BID: 0008EFA0 size of BIOS: 00800000
    non_shareEC Ec starting address: 00000000, end of Ec address: 00000000, current size: 00010000, new size: 00010000

    Preparation stage

    Error code: 3010 (0x00000BC2)
    Cleanup phase
    Step completed
    -Newspaper arrested: 2014/04/17 22:06:11

    Problem solved with the permission of edsilha response: http://h30434.www3.hp.com/t5/Wireless-Internet-Home-Networking/Wireless-button-stays-orange-Will-not-turn-on/m-p/914285

    HP technical support comes to walk me through the resolution of this problem.

    1. remove the battery and unplug the power supply

    2. press and hold the power on button for 30 seconds

    3. allow battery but to plug the power unit in

    4. Press power button, then press the f10 key immediately (a number of times)

    5. the bios Setup menu appears

    6. select Reset default values

    7. Select Save and exit

    System boots and the wifi key changes from orange to blue

  • Update BIOS v6.00 - WIN for Satellite A100 - 811 (PSAA8)

    I want to know if this update works great for the A100-811?
    The latest version 5.9, I realized he had a problem with it. In fact messed up my computer.

    I took it twice for the service guys, because I thought I did something wrong, but I followed all the instructions corectly. Link to IOS http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=234&service=EU&from=faq_selection&CFID=B & FID = TRO0000000b07

    Thank you in advance.
    Marius

    Post edited by: mariuspmg

    Hello

    I ask myself why Toshiba is expected to publish a bad BIOS?  :|
    It makes no sense to me, you can find a lot of people with a Satellite A100 and as far as I know nobody had and problem with 5 BIOS update, 9 - Win for A100 PSAA8
    So I guess you did something wrong.

    However, according to the European Toshiba 6.0win driver Bios page is available at this time and should work fine

    But I have an important question; Why do you want to update the BIOS?
    Is there something wrong with your laptop?
    If not, then the update of the BIOS is not necessary and as you already know an update of the BIOS is ALWAYS risky ;)

    take care of the GUY

  • Update BIOS version 1.55 for the hard-to-find S540!

    I discovered by chance that today there is an update of the BIOS for the Thinkpad S540 at the link:

    http://support.Lenovo.com/en_GB/downloads/detail.page?&docid=DS038373

    This is the version 1.55, released on 12 May.

    .. .and even if I go to drivers in general download page for the selected as the portable S540 concerned and looking at the BIOS available in the list of available software and drivers, it is still the old one version 1.54 of 12 March and not the new BIOS version 1.55 may 12 as in the link above!

    I think that there is a problem of updating web pages at the Lenovo site downloads?

    It seems that Lenovo support web pages are updated now so it's resolved.

  • Freezing and slow: would not update Bios using Windows 7? Could not find a...

    I had problems with horrible or recurring virus on my HP Pavilion 061 (RK551AA-ABAa1648x) so I installed Windows 7 32 bit.  The system is now incompatible: it runs slowly, often hangs and can be difficult to start.  I tried a BIOS updated, but it does not exist?  This seems strange - my current version is 3.06 14/07/2006.  I updated the NVIDIA chipset driver.  I intend to install 2 GB of additional RAM.  Then it is true that it is not a BIOS available updated?  All suggested fixes?

    I suggest that you back up your data and make a complete reformat of your hard drive. Then re - install W7.

  • ENVY 15 t-ae000: (F2 and F3) brightness control keys do not work after update bios and Windows 10 update

    After that I upgraded to the latest version of the BIOS and upgraded to Windows 10, brightness controls no londer work.

    Would appreciate any help.  Thank you

    Hello

    If your laptop uses Nvidia Optimus (Intel + Nvidia GPU), try to download and reinstall the Intel HD graphics driver on the following link.

    http://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74569.exe

    When reinstalling, restart the laptop.

    Kind regards

    DP - K

  • Update iTunes reduced Windows 7 for THE BLUE SCREEN OF DEATH

    does anyone else have this problem?  After I got the BLUE SCREEN I reset Windows to an earlier date and tried to install the new version of iTunes again and it happens every time I install it.  I lost all my music in iTunes and apple all can say is "it's a problem of microsoft."  someone will save us please the tyranny of apple?

    You have a version of iTunes or Quick time software installed?

    If so, uninstall, and then download a new copy and try the installation again.

    Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.Apple.com/kb/HT1923

    Uninstall software, remove programs and solve uninstalling problems
    http://www.revouninstaller.com/

    ITunes download (32-bit):
    http://www.Apple.com/iTunes/download/

    Download 64 - bit:
    http://support.Apple.com/kb/DL1037

    iTunes for Windows: how to disable Compatibility Mode
    http://support.Apple.com/kb/TS1489

    iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32."
    http://support.Apple.com/kb/TS1406

  • Satellite Pro A300 (PSAG9E) - after updating BIOS Windows will not start

    Restart went well after update BIOS and Windows XP logo appears loads for a few seconds then a beep and restart - last good known or start Windows normally same effect.
    Reboot back to start - this is a new laptop - using the BIOS of Toshiba s official download site.

    Quite annoyed to try to find a way to upgrade or downgrade the BIOS.
    Took battery and RAM to see if I can delete it?

    Any ideas anyone?

    I think you mean BIOS * update * and do not upgrade ;)
    An upgrade is not possible

    However, you can try to remove the battery and the AC adapter and wait an hour. After that, reconnect the battery and the AC adapter and try to start Windows.
    Moreover I would load the default settings in the BIOS before starting Windows.

    If it doesn't work, it seems that your ROM module needs to be reflashed. In this case an ASP can help you.

  • Need help to update BIOS on Satellite L30-113

    Hello

    I just downloaded the latest update of the BIOS for my Satellite L30-113 (PSL 33) and I was about to install when I remembered that I actually downgraded to Windows XP(this notebook is originally with WIndows Vista).
    My question is it will produce no problem when I run the .exe file, because it can be programmed to update BIOS under Windows Vista only?
    I know there are a lot of competent users who can help me in this forum.

    Thanks in advance.

    Hello

    I just got a check for the BIOS on the support and downloads page and I found the inscription as "OS independent. This essentially means that the update is compatible with both operating systems.

    Remember that when you update the BIOS, you need ensure the power supply is connected, software security is disabled, nothing is attatched to (other than the power cord) system, power is turned off (such as screensavers), saving features and no other software is running. Also disconnect from the Internet, too, if possible.

    You can download the latest version of the BIOS here:
    http://Support1.toshiba-tro.de/Tedd-files2/0/BIOS-20071106150302.zip

    Also, you can find the update may not work if a BIOS password is set, if this is the case, you need to delete that, too.

    Kind regards
    Nukey

  • HP Pavilion 500-141ea: which recommended update BIOS to use?

    I have desktop PC HP Pavilion 500-141ea, bought 2014.03.27 not produce. D7D35EA #ABU.

    Manu of motherboard: MSI, model: 2AE0 (P0). Current BIOS is what FRIEND 80.35 dated the 2013.07.10

    Win 10 (64-bit)

    Online support suggests that this office should be updated to versions...

    (1) update BIOS of desktop PC for the consumer HP Rev.A 80.52 (SSID family ROM 2AE0) 5.1 MB 12 November 2015

    (2) HP Desktop system BIOS Update for the models of PC PC 2013 HP Pavilion 500 - axx (with a ROMA 2AE0 family) 80,51 Rev.A 2.9 MB November 4, 2015

    How will I know that I should use?

    Greetings,

    80.52 is the last and will include the previous update revisions.

    Download the update manually. Do not use the HPSA.

    See you soon!

Maybe you are looking for

  • Strange noises with my Tecra

    My Tecra makes a noise slamming when I work. I guess that's the drive hard, but not sure. I don't think it's normal because I never heard other machines popular as strong snap. In addition, one of my friends use the same machine in his office and doe

  • HP Pavilion 15 laptop: Solved: unable to connect to my wireless network

    I have problems connecting to my wireless network. In available connections, my network is there with an x next to it. I can click on it and put my security key in, but it says unable to connect to the network. I've updated ready network cards. Any h

  • Pre backup does not every day...

    Nice day. I'm curious to know if there is someone who can help with a solution to this problem. I stay in my backup and noticed the last time, she has been saved was on 28/06/09. I reset the phone and nothing happens. I try to manually do the backup,

  • replacement dv7 6c80us dual band wireless network adapter

    Hello, I'm looking for a list of cards supported for the 6c80us dv7 laptop replacement wireless network. Anyone happen to know where I can find this list? I would like to replace my Intel 2.4 Ghz card with a dual band card. Thank you Damon

  • My smart-net-total-care portal does not show inventory and Segments see other admins

    My smart-net-total-care portal does not show inventory and Segments see the other admins. Our "Managing Director" has installed a collector who submits an inventory of our company on the Smart-Net-Total-Care Portal. When I log in to see the informati