Gracefully shut down system in case of power loss

We have an ESXi server that will be connected to a UPS device.

Is that when the UPS device notices a loss of power, it can send a signal to the ESXi free turn off all hosts and go out anyway?

Anyone has a solution or a software for this, I know its strange.

Would appreciate help or comments

Thank you.

http://communities.VMware.com/docs/doc-11902 is the new script of UPS.

http://Communities.VMware.com/docs/doc-9531 alternative.

Tags: VMware

Similar Questions

  • Cannot shut down Windows 10 laptop with power button / stop

    I have a laptop Aspire E5-532 with Windows 10.  I have configured the power management to turn off the laptop when I push the power button.

    It does NOT work.  When I push the power button, nothing happens.

    Help!

    I thought about it.  Press the button for a few seconds so that the system recognizes the button push!  When cela all functioning properly.

  • HP MINI 110-1066TU: enter the CURRENT password, password verification failed, fatal error, shut down system, CNU9354TX2

    Hello!

    Help, please.

    my computer laptop hp mini 110-1066tu says "Enter CURRENT password". When I enter the password three times he says "Password check failed, fatal error...". System stopped. CNU9354TX2

    Please can someone help me.

    lechartier

    Hello

    Enter: e9lofqva47 (to be noted that in both cases, the 3rd character is a lowercase L)

    or
                     e9lofqvar7

    Kind regards

    DP - K

  • Best way to gracefully shut down my VMware environment?

    We have a failure and I would like to know the best way to feed all my VMs and hosts offshore.  Here's what I think to do:

    -Disable DRS for Vcenter (it's a virtual machine)

    -Start to turn off the virtual machine

    -Enter in maintenance mode on the host ESX, then their power off

    -All off the virtual computer will be on a due to the DRS ESX host

    -The last of all power down from Vcenter

    -Then use the VIC to get into the final ESX host and turn off with

    To turn on I would do the following:

    -Turn on the host with Vcenter ESX and then turn on Vcenter and begin to turn the hosts and VM

    -Of course, I'd wait for the CC and SAN to come online.

    Any suggestion would be appreciated.

    Thank you

    Stem

    When only vCenter and DC are always power - plug directly into ESX VM power down.

    Wait until Windows stops, then you can just off ESX without maintenance. Simply because the maintenance means something, when you are connected to vCenter, ESX not directly.

    ---

    MCSA, MCTS, VCP, VMware vExpert 2009

    http://blog.vadmin.ru

  • Pavilion G6-1c74ca: unable to shut down system repair disc

    I tried to order the recovery disks for my laptop for the last 2 weeks and I still get the "ordering the temporary application not available - try later." Anyone know what he bad?

    Thank you. I called this morning and everything was settled.

  • VAPP Shut Down Action - does not?

    Hi all

    I have a VAPP container configured with two virtual machines in separate groups. I have on each configured virtual computer (tab Start command) start and stop actions. For stop, I have everyone on 'Stop the guest PC' for he gracefully shut down the virtual machine. However, it seems that the VM is simply turned off and the "Guest Shutdown" option is simply ignored. I tried all the other options (Suspend, None etc) but when I stopped the VAPP - power of the virtual machine down.

    Start Up works perfectly however.

    What throws me a bit, is that when I right click the TIME to select "Shut Down" - she tells me that I have to stop my guests FIRST, before I stop vApp. Why is this? I thought it was supposed to manage the order of start and stop based on the order of the Group and delays etc.?

    I should add that all this runs in a LABORATORY of 4.0 Vsphere (No. Vsphere updated applied yet)

    Any help with this is appreciated.

    Hello

    You must use the 'Power Off' instead of 'Shutdown' option in the vApp.  The 'Power Off' option stops the virtual machine according to your settings.

    Best wishes / Saludos

    -

  • can I stop an active backup in case of power shut down and restart to the top where I left?

    can I stop an active backup in case of power shut down and restart to the top where I left?

    Hello

    We can stop the backup process, but cannot pause.

    For more information about the backup and restore process, see the link:

    Backup and restore: frequently asked questions

  • How to solve the problems of windows 10 shut down (power, lighting the keyboard is always on)?

    Nice day

    How to solve the problems of windows 10 shut down (power, lighting the keyboard is always on)?

    with regard to my question above. I need to hold the button of power for 5 seconds to completely shut down my laptop. even restart or sleep does not work well. I upgraded a real victory 8.1 to 10 free victory by that windows app reservation offered. IM using acer aspire v5 - 573 g i7, version gt750m, Finnish keyboard

    solutions, I tried to random searches that did not work for me.
    1 unchecking quick stop to power options
    2 disabling hibernation in cmd (types a code forgot what I have)
    3. update all drivers and bios with sites acer official drivers, driver pack solution 15.8 and utility driver update intels
    4 decommissioning intel management engine components driver 11 to 9.5
    5. go to the bios and reset to the default settings
    6 make a shortcut of "shutdown" with codes e.g. shutdown /s /t 0
    7. click Update stop

    IM thinking of reinstalling windows 10 via recovery which removes applications, files, drivers, etc. and hope this solves. I can't roll back to win 8.1 because ive done this reset before you completely clean out my system of win random 8 and trashes the restore option was gone.

    Thanks in advance

    Hello/Hallo wuschel93,

    exactly what I had. Stop number appears only after a certain time the laptop running.

    The problem is INTEL MANAGEMENT ENGINE RELATED V.11!

    I fixed it with uninstall Intel Management Engine Version 11. Windows will then install version 9.5 automatically. After that I turned off the automatic update of the driver for this device. You can also install 9.5 without uninstalling the old one, it wil crushed.

    Other manufactures also have this problem, but while Acer is still asleep, they provide a solution (including download links):

    http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/sleep-and-shutdown-issues-after...

    Maybe there are any other issues that result in the same problem. But in most cases, it's the answer. The thread Starter maybe forgotten to disable the automatic driver update or made installation of v9.5 evil?

    TEPCO

  • Z3200: Z3200 after Propairing Ink System: Shut downs

    We have an opportunity Z3200 who asked two print heads. Replaced all, and all was well for a while.  Turning off the plotter, removed from power for 1 week.  After turning the power on again the Z3200 boot. Then the screen turns off, shuts down the power botton, but PS fan will continue to operate.  In this state the power button lights not Z3200 return.  The rear power switch must be turned of, and then turn on the printer will go through the same process, and then closed, fan on again.

    Dianostics running, transmitted electronic Mod. Past of transport.

    Ran clear the NVRAM - OK

    Printer asked all print head needs to be replaced, Ok, all removed and reinstalled everything.

    Printer entered prepairing system print, but as soon as it beeps all makes, the printer stops back, empty display and the dark green power button, but the fan of the power supply running.

    And suggestions or solutions out there?

    Spoiler (Highlight to read)

    Thanks for the information!

    Here's what worked for me:

    After going around in circles with this, I removed all of the print heads, tool to clean all the contacts, two or three times.

    Then after seeing a sort of film on the back of the print heads, their contracts, I cleaned the institutions.

    I saw this being a problem on of the Z6100.

    Then I repeated the process clear NVram.

    Has passed through the stages of replacement print heads.

    The system went wrong the 4 process and did not fail this time.

    Adding paper, crossed all the lines and the color calibration!

    Back online.

    [Everything was fine before, until I stopped and unplugged a few weeks ago]

    Thanks again!

    Spoiler (Highlight to read)

  • Compaq mini 700: Compaq mini 700 laptop error fatal system shut down.

    Compaq mini 700 laptop error fatal system shut down.

    CNU9144WRX

    can you pls give me a current password. my mini doesen´t have a.

    THX

    Hello

    Enter: e9lo3vvdb4 (to be noted that in both cases, the 3rd character is a lowercase L)

    or

    e9lo3vvdbr

    Kind regards

    DP - K

  • System shuts down randomly.

    System shuts down randomly. Watched the Sytem log and found this. Event ID: 1003 category: 102. Error code 1000000a, 99e84008 parameter1, parameter2 00000002, parameter3 00000001, parameter4 8051f78f. No idea if it's the hardware or software associated with?

    Hello

    1 have you done with the hardware changes to your computer lately?

    I think it's an IRQL not less than or equal stop error, it is usually a device driver that requires.

    I suggest that you follow these steps and check to see if they help.

    Step 1:

    Disable the automatic restart in case of system error:
     
    a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.
    b. use the arrows to choose to disable automatic reboot failure system to the Windows Advanced Options menu appears, and press ENTER.

    Step 2:

    Although the error code cannot be bound, you can follow all the measures applicable from this article and see if the problem still occurs.

    http://support.Microsoft.com/default.aspx?scid=kb;en-us;q314063

  • [8510w] system shuts down / is not start when the card is inserted

    Hello
    my old 8510w developed a bad thing - when the power cord is inserted, system will shut down. Works fine on battery.
    Symptoms:

    1. stops when the power cord is inserted;
    2. does not start then on the power supply;
    3. charge led flashes in unusual ways - led is quite low, but gets a little more brilliant ca once per second;
    4. power led lights also dimmed down mode.

    I tried another adapter as well, so that should be good. I would like to know if this problem is known and could be repaired (quite easily), or there is no point to this end by like old computer as 8510w.

    -------------------------------
    8510w
    Debian Wheezy / Win7

    Measure the output voltage of the AC adapter does not prevent the failure of adapter to even the slightest charge.

    If the laptop will not start even with an identical power adapter connected and remove the battery, then it is very likely that the electric distribution/charging circuit on the map system of the laptop has a faulty component.  If you're a troubleshoting capableof until the component level and bulbs to solder you can fix the system board. Most people choose to replace the motherboard or laptop.

  • STOP: c000021a {fatal system error} the initial session process or system ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c). The system has been shut down

    I am trying to start my Dell Inspiron 1525, but get the following blue screen message "STOP: c000021a {fatal system error} the initial session of the process or system process ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c).» The system was stopped.

    I tried to boot mode without fail & startup repair but nothing helps, always the message, any help would be really appreciated as all my College work is stored on the laptop.
    What about Otto
    Windows vista Home basic

    Hello

    Check with Dell Support, their online documentation, diagnosis and ask in the forums about known issues.

    Dell support
    http://support.Dell.com/

    Dell support drivers - product manual & warranty Info (left side) - and much more
    http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

    Dell forums
    http://en.community.Dell.com/forums/

    =========

    STOP: 0XC000021A

    Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
    (not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

    Cause

    This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

    Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.


    Solve the problem

    Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

    Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

    If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

    Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

    Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

    STOP: 0XC000021A<-- read="" this="">
    * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

    -----------------------------------------------------------------------

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
    above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not have to try
    repair, you can borrow a friends because they are not protected against copying. You can also buy the physical
    discs of the machine system good cheap that you already own windows (you will need to reinstall
    If necessary). You can also repair disks on another computer.

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during "blue screen of death," collisions
    Displays information on all the "crash" of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
    It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • "display driver has stoped working, but was recovered" and then shuts down the system. "

    I have a problem with the opening of my yahoo email because my computer just Bonnac outside and flashes once or twice and says "display driver has stoped working, but was recovered" then shuts down the system. " Itsriving crazy me :(     (I have windows vista & pentium bicoeur.)

    This means that there is a problem with your graphics card. I suggest that to update your Windows and check of course latest service pack installed. Also check Windows problem and Solution Center and see if everything suggested installation listed there. It can make it appear to update your graphic card.

    If this isn't the case, try looking in the card of your gaphic provider or your PC support Web site to update its driver.

  • Computer shutting down/tower guard is free of dust/power supply is fine

    My computer has been stop randomly for a few months now. I lived all the possible forums to find a solution.

    The problem:

    When you play a game like the Sims 3 or Elder Scrolls, the system shuts down randomly. At any particular time in games that this. I changed all the settings on my games at least, I cleaned the housing/video card/power supply/CPU/fans/and any other possible place of dust, I've updated everything it needs to be updated, the temp holds at 30 ° C... The computer stops also during playback of videos on rare occasion.

    Earlier, I ran a diagnosis under resources and performance monitor and came up with these questions:

    Error
    Symptom: Device cannot start.
    Cause: A device has a configuration problem that prevents it from starting correctly.
    Details: The device, Microsoft Teredo Tunneling adapter, cannot start properly. It was perhaps not the right driver installed or may be experiencing a hardware failure. The Plug and Play ID for the device is 11.
    Resolution: 1. check that the correct driver is installed.
    2. try updating the drivers using Windows Update.
    3. check with the manufacturer for an updated driver.
    4. try to uninstall and reinstall the device using Device Manager.
    Partners: Explanation of generated by Device Manager Error Codes
    Manage devices in Windows
    Symptom: Device cannot start.
    Cause: A device has a configuration problem that prevents it from starting correctly.
    Details: The device, Microsoft Teredo Tunneling adapter, cannot start properly. It was perhaps not the right driver installed or may be experiencing a hardware failure. The Plug and Play ID for this device is ROOT\ * TEREDO\0000.
    Resolution: 1. check that the correct driver is installed.
    2. try updating the drivers using Windows Update.
    3. check with the manufacturer for an updated driver.
    4. try to uninstall and reinstall the device using Device Manager.
    Partners: Explanation of generated by Device Manager Error Codes
    Symptom: Device is not present, not working not properly, or does not all its drivers installed.
    Cause: A device has a configuration issue preventing it from working correctly.
    Details: The device, hlnfd, reports "tv_ConfigMgrErr24". This device won't be available until the problem is resolved. The Plug and Play ID for this device is ROOT\LEGACY_HLNFD\0000.
    Resolution: 1. check that the correct driver is installed.
    2. try updating the drivers using Windows Update.
    3. check with the manufacturer for an updated driver.
    4. try to uninstall and reinstall the device using Device Manager.
    Partners: So, I found one of the mistakes and he said: it is related to my keyboard. My keyboard works very well and I am very doubtful that this is the reason why my office continues to close. Anyway, if you have the slightest idea of how to proceed, please let me know. I thank very you much for your time.

    Problems with the video/display is caused mainly due to display driver problem. You can upgrade display drivers (that is to say, the graphics card drivers) or reinstall the drivers: uninstall the drivers, reboot the PC, install the drivers, reboot the PC and then check.

    Maybe you are looking for

    • Helps to connect the Satellite A100 HDD IDE

      After a disastrous accident defrag I can't start Windows XP. I want to connect the hard drive to another computer via an IDE cable in a portable control box. My hard drive has previous Toshiba to an IDE connection, but the Satellite Pro A100 seems to

    • Kernel panic causes of Spotify

      Hello! After months without kernel panics, I started to experience on a regular basis, about a week ago. Crashlog I did some research and discovered that the problem apparently comes from a conflict between Spotify and the OS X Firewall. Spotify is a

    • Why windows 8 poster file in KB instead of mb?

      My Windows 8 windows Explorer displays the files in KB instead of mb, why?

    • Setup.exe problem?

      HP Scanner problem.  Deleted and all printers HP software.  Try to reinstall the software from the original CD. Put in CD and nothing happens.  Could this be a problem with setup.exe?  How can I check to see if I have setup.exe & how can I reinstall

    • I hate this printer

      I have a photosmart hp printer for a few years. I always use hp ink cartridges and now randomly I get error Ox left and right. Different every time. Nothing has changed. I used to print correctly on a regular basis very well now, I get the error and