Pavilion G6-1c74ca: unable to shut down system repair disc

Similar Questions

• Laptop HP Pavilion 15-n073sl: unable to shut down the pc

  Fifteen days ago, my computer (which I've updated for Windows 10 on 16 June) updated itself last built Windows 10, since then 4 times out of 5 I'm not able to close properly.

  I close all the programs the I click on start and closing of the option. It starts to shut, but when the screen goes black, it freezes and stuck there with all the leads keybord and internal fan on so I have to force shutdown by the Start button.

  I spoke with the support of Microsoft and they told me that it depends on the fact that HP has not released a driver for the new version of Windows 10 (build 1607 14393.187 SO).

  ... What am I what to do now? I downloaded the update from the HP Support Assistant software, but it is empty of any update. On the page of the driver of my laptop on the HP site, I found some drivers, but I don't know if I have to download them all, or I don't know.

  Hope for more assistance,

  Thanks to that answer.

  Hello

  Try the following.

  Again, open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close all open windows.  Stop the laptop by right clicking the icon in the Start Menu, select prompt (Admin) and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Start Notepad and when reloaded windows, hold down the Windows key and press R

  In the run box, type devmgmt.msc and press ENTER.

  In the Device Manager window, expand System devices, and then scroll to the Intel Management Engine Interfaceentry, cela a right click and select Properties.  Select the driver tab and select uninstall driver - and then proceed with the uninstall.

  Restart the computer and let Windows idle for 5 to 10 minutes just to give time to reload the driver imei.

  Restart the computer again (fast start disabled for the moment leave) and see if it will now shut down properly.

  If so, reactivate a quick start and check if it will always stop Ok.

  Kind regards

  DP - K

• Failed to create the system repair disc receiving error code 0 x 80070057

  Original title: System repair

  When I try to create a system repair disc it gives me a message "the parameter is incorrect (0 x 80070057) '. In the same area every time I try to make a back-up, I get a message telling me the back-up was done, but without some missing files?

  No help available?

  Ray

  Hello Ray,

  Thank you for your response.

  I appreciate your time and your efforts.

  Please refer to the suggestions of Sharkbyter replied on 18 May 2011 and check the issue.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/unable-to-create-a-system-repair-disc-0x80070057/66b208a9-CD48-447C-98C3-e59f3553c842

  Note: The use of third-party software and links, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software and links can be resolved. The use of links and third-party software is at your own risk.

  I hope this helps.

  Thank you

• Equium A110-276 unable to shut down or Hibernate

  With the ac adapter connected to the laptop, I am unable to shut down or Hibernate. When to stop or go into hibernation, the computer seems to do everything right until the power is off. When the power is off there is a delay of two seconds after which re-booting the computer again. This problem doesn't happen with the ac adapter removed from the computer (drums only).

  Problem started after my husband inadvertantly connected adapter while the computer has boot the system. Have you looked at the BIOS settings and everything is ok; looked at the power in the control panel settings and all looks ok.

  Can someone please help?

  Hello

  AFAIK the Toshiba Power saver controls things standby and hibernation.
  You must first delete your energy savings, and then after removing own and after restarting again you must install the version of the Toshiba driver page.

  If that does not solve the problem, you should try to update the BIOS. But be careful. Don't forget to use the good BIOS and the correct procedure of updating the BIOS!

• HP Pavilion series p6000: Windows 7 system repair disc

  is it possible to get a repair disc without having windows 7? mine broke and I don't have an ERD. the boot sector crashed on me, so I kinda need a. im using right now it works on xp. not bad, but this computer is slow

  If you have a friend with Windows 7, a repair disc can be done.  There used to be a download for the system repair disc, but it was taken down, so you need a working Windows 7 PC group to make.  A Windows 7 installation disc can also be used - boot the disk and choose repair instead of the installation of the screen after the first screen.

• System repair disc creation

  Product: HP pavilion dv6-6145eo

  Operating system: W7 64-bit

  Error message: System repair disc could not be created. The setting is incorrect (0 x 80070057)

  Tried to burn the disc after installing Windows. What's wrong?

  Hello

  If your laptop will not create a system repair disc, here are a few other options.

  1. you can use an other PC 64 bit of Windows 7 to create a CD to repair.

  2. you can download the ISO from the link below.

  Windows 7 64 bit

  You must use an app like ImgBurn to properly burn the ISO to a CD.

  Concerning

  DP-

• Error code 0xc0aa0204 when creating a system repair disc

  I get an error when I tried to create the system repair disc. The error indicates that the media is upside down, (0XC0AA0204 error code). It is not upside down. How can I solve this problem?

  Hello

  With the publication of the description, I understand that you are getting an error code: 0XC0AA0204 while creating a system repair disk on your Windows 7 computer. I will certainly help you get this fixed number.

  Since the error itself says that there is a problem with the disc. While there might be a possibility of a few scratches on the disc, or it might not be readable by the optical drive.

  I suggest trying to use another drive or you can also try to use this same disc on any computer/computer to diagnose whether or not the problem is with the disc.

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• HP ENVY m6-1117tx Notebook PC: System repair disc

  I don't have a system repair disc and I can not creat, because it seems I've lost the media player.

  I need help please

  

  I'm sorry that you misunderstood me. Follow the steps please: -.

  Step 1: Download iso Windows 10 from here:- https://software-download.microsoft.com/pr/Win10_1607_EnglishInternational_x64.iso?t=fd790faf-0310-42fa-bf0a-dc805df3451f & e = 1476504729 & h = 08a437b43cf3af38579673435bb13ce0 (ASAP link valid only for the next 12 hours)

  Step 2: Rufus open (or img burn if the dvd is used)

  Step 3: drag your iso page

  Step 4:-click Start

  For your convinience, here are some links for reference:-https://www.youtube.com/watch?v=QC_qKKFYAcc (Rufus)

  IMGBURN LINK:-https://www.youtube.com/watch?v=lizhzDX7-AI

  Click on Bravo or accept as solution if happy.

  Happy to help you @AmreenSanhotra

• error code 0 x 80070057 during a system repair disc

  error code appears when I try to do a repair of the disk system, how can we resolve this, steve.

  Follow the instructions mentioned in this article:

  Error (0 x 80070057) trying to make the system repair disc
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/error-0x80070057-when-trying-to-make-system-repair/2a7dfd00-6588-4cbb-9816-f40b13041da4

• Getting the error "the device reported unexpected or invalid data for a command. (oxC0AA02FF) when you try to create the system repair disc

  original title: error 0xC0AA02FF

  I try to use a "USB" "cruzer" to create a disc repair system, but when I click on this drive to create it I get the following error message:

  "The device reported unexpected or invalid data for a command.  (oxC0AA02FF)

  Hello

  What method did you follow to create the system repair disc?

  I suggest you to create the system with different USB repair disc and check if it helps.

  Means all try the methods and check them off below if it helps.

  Method 1:

  Try to put the computer in a clean boot state, and then check if it helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to perform check disk (chkdsk) on the computer and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Note: You may lose a small amount of data while performing the check disk.

  I also inform you that the data on the USB key will be lost. You should take a backup.

  You can also check with the reference article below:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

• Format my laptop without installation disc, the system repair disc or the system image.

  I'm 15 and I need to clean my laptop HP Compaq because it's painfully slow; I have no disk Windows installation, without additional disks except the system (C :) and recovery (r :)) and I cannot create a system repair disc OR a system image.)) I lose my sanity in this laborious process, please help me!

  Have you ever run the Norton removal or the McAfee Consumer products removal tool?

  Did you know you can use the hidden restore partition to do a clean install of Windows? CF. http://support.hp.com/us-en/document/c01867418

• Create the system repair disc

  I can't do a Windows 7 system repair disc.  I get the following message:

  System repair disc could not be created

  The disc has no burn checking and may pass
  contain corrupted data or be unusable (0xC0AA0007)

  To work around the problem, I could use a system repair made on another computer disc, but I have some questions about it.

  Is a system of specific computer system repair disc?  Should be used on the computer that actually?

  A system 10 Windows repair disk can be used on a Windows 7 computer?

  A Windows 7 system repair disc can be used on a computer of 10 Windows?

  I'm stuck.  Help, please.

  UPDATE:

  II found the cause of my problem and now I want to pass the information to all those who encounter this problem on similar computers.

  The computer is a RC210G-old Sony Vaio VGC, which is a strange beast, indeed.

  The computer originally had Windows XP MCE on it and a BIOS that begins with PR94510J.04T.0096

  This computer has a few tricks RAID on the motherboard, and any settings in the BIOS or Windows, empty DVD players are not recognized.  So the solution to my problem is to put a disk used in the drive to DVD - RW and THEN launch the utility to do a system repair disc.  Once the drive appears and I am asked to put a blank disc in the drive, eject the disc used and put in a vacuum before clicking CONTINUE.

  If I followed the above procedure, the disc manufacturing process goes as it is supposed to.

  Thank you for your attention.

  To get all the features of a repair disc, you must create it on any machine with the same width (32 or 64-bit) bus and under the same version of Windows.

  Disks of repair carried out under different versions of Windows can also be used, but they offer reduced functionality. The work of the command but prompt the system restore will not.

• System repair disc does not work in repairing, it comes back indicating that the version of ERD is not compatible.

  Hello

  So tonight, I created an image of the system as I upgrade my hard drive then created a system repair disc and when I boot from the CD, it comes back indicating that the version of this repair disc is not compatible with windows installed even if the original drive has been deleted?

  Running Win7 Pro, SP1 new drive is a WD Black edition.

  Now!  I must inform you that I tried to upgrade to Windows 10 earlier this week and when it starts, he returned with an error xoxox and returned to Win7 but not the point of restoration I created before moving to 10 and the only way that I get using my system repair disc/image I created a week earlier weird!

  But this should not affect my image and the disc I created tonight, correct?

  Thanks for the help

  I have not installed Norton bloatware.  The easiest methods for backup are discussed in clean reinstall Windows Upgrade 10.

• Difference between the use of system repair disc and original media

  Hello

  I'm about to create a backup image of my OS, but I can see an option for a system repair disc, but in a previous question, I was told that the original install media will suffice.

  Should I create this image or only be concerned about the system.

  Thank you all.

  Just three days ago, I used a Windows 7 (without SP1) installation disc to restore a System Image of Windows 7 with SP1.

  If you want, you can create the system repair disc, but it is not necessary.

• Error code 0 x 80070057 - refuses to do a system repair disc

  There it is again!

  I tried to do a system repair disc on my hp ProBook laptop computer brand new with Windows 7. I have inserted a DVD r and hit all the right buttons but got the message "system repair disc could not be created: parameters are incorrect (0 x 80070057).» I tried with r blank CD, DVD r blank and rewritable DVD = all with the same result

  After reading a few reviews on this site, I ran CHKDSK but everything was fine. I also ran DEFRAG but get the message that it was not necessary. Then I went to Windows Live and attempted to run the CLEANING (Windows 7 version) - but, surprise, surprise - I got was a message 'we cannot install the scanner.

  What a complete and utter all my time loss is - WHY do I get error 0 x 80070057? WHY Windows Live Scanner does not install? WHY should I spend hours trying to solve this operating system, just to make a backup disk? Something I could do in 98, Me and XP with no problems at all?

  Someone has AN idea, what happens? I would really appreciate some help here to save what remains of my hair!

  If it was my computer, I would like to do a clean install now. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx