grain and noise

Similar Questions

• How can I remove grain and noise of my "rushes". video was filmed during the night with poor lighting and a digital SLR

  grain and noise reductiom

  As already suggested, video Neat.

  https://www.neatvideo.com/

  Embarrassing bad web site, very good product.

  Don't forget that in addition to the expense of the plug-in, noise reduction is a very intensive rendering process - and so you have the payroll to the supplementary budget to make files.

  Do a test on excerpts and see if it works well enough for you.

  If so, edit without making the noise reduction and, once you have the material cut down to just the sections that need a treatment, do your the noise reduction on all this material.

  MtD

• Cc of Photoshop [began to shoot pictures of my wines and place them with grain or noise above]

  my current photoshoo began to shoot pictures of my wines and place them with grain or noise on top. I tried to solve this problem without adobe success Ive deleted the program and downloaded without success on the issue of fixing.

  Make sure that Cache levels are set at least 4 under preferences > Performance.

• Start of satellite L10 fan speed and noise

  My L10 cooling fan start always maximum speed, when it turns on it always burst at maximum speed (and noise) and then slow down to a speed (and slient relative). This fan start noise is very annoying (as fan departure every half hour in office work and every 15 minutes in some simple games).
  I try muffler or bios settings performance they do not fix the noise and the starting speed.
  Maybe Toshiba could release some bios update or patch or something to fix this? (my bios version 2.0)
  Maybe this problem has the solution software thrid party?
  Or the fan speed max is just a hardware problem?

  Thank you.

  Hello Albert

  The same thing my Qosmio F20 and in my opinion, it is not any kind of technical problem. At the moment I'm typing this text and hear Internet radio at the same time. The cooling fan works regularly.

  In my opinion, when the operating system runs several different processes running in the background and they need the CPU activity that needs to be cooled correctly. In my opinion, you should check the power settings management settings and change the performance of the processor to lower the level.

  If the cooling fan runs every 15 minutes, in my opinion, it is not too often.

  Good bye

• F55 low light bands and noise

  Need help.

  We have some problems when shooting in low light.

  http://antosch.dyndns.TV/owncloud/index.php/s/mKOEqbsXQrwFVSn

  You can see bands and noise in the viewfinder and screen on board as well as on the pictures.

  Also more brightness also enhance the effect.

  The parameters are:

  AE Slog3 movie

  MPEG 25 1920 x 1080 p

  Exhibition index 3200

  MLUT LC709 Type A for the viewfinder and SDI

  
  

• Possible bug in sv_Harmonic distortion and Noise.vi

  Hello

  I ran into what seems to be a bug in distortion and Noise.vi sv_Harmonic

  I call this VI into a higher level VI which is part of the box sound & Vibration tool (SVT SNR without harmonic (time) (1ch) .vi)

  What is happening is that I sometimes get error 0xFFFFB1A3 (-20061):

  Error-20061 occurred at NI_MABase.lvlibine Waveform.vi:22 > NI_MABase.lvlib:ma_Trap Fgen parameter Errors.vi:1
  frequency must be<= sampling="">

  Possible reasons:

  Analysis: The selection is not valid.

  This error is actually produced in distortion and Noise.vi sv_Harmonic by one of his subVIs (your unique information (complex) .vi svc_Extract) although I'm not able to activate debugging for this VI so I can't dig deeper.

  What seems to be the case, it is for certain fundamental frequencies that result in higher order harmonic which is located very close to Fs/2, you get the error.  I have attached a waveform and a simple VI that generates the error.  My debugging, it seems that the error occurred when the code attempts to extract the harmonic at 5119,53 Hz.  FS/2 is 5120Hz, so it must be valid, but generates an error.

  Thank you

  -mat

  Hey Matt,

  I spoke with R & D and the source of this problem is we're detects peaking at exactly the Nyquist frequency for the 127th harmonic, while it should work, we get the false error. To work around the problem, you can specify the frequency range of 0-126 harmonics as seen in the image below.  Have one less harmonic should not be a big problem as the harmonic 127th is anyway in the noise.  R & D is now aware of the issue and look forward to it.   Thank you!

  

• Dumpsters and noise in audio and video players

  Hi, all my audio and video players in the laptop, the present jump (interruption) and noise, while playing, can someone help me please?

  Hi Sergiorey,

  This problem can occur if the device controller or audio sound card is out of date.

  I suggest you to see the following link for more information.

  Play an audio or video file: frequently asked questions (what can I do on the audio problems, such as popping, crackling, or sound that plays too fast or too slow?)

  http://Windows.Microsoft.com/en-us/Windows7/play-an-audio-or-video-file-frequently-asked-questions

  Post us the results once you try the steps above.

• Heating and noise problem laptop while streaming

  If I open several tabs of youtube. And online streaming. I noticed intense heat under my palm and noise. I also notice jumps high processer in the Task Manager. A couple times my machine stops, too. (probably due to heating of the processor).

  To avoid this situation that I should get more RAM? Currently I have 1 GB. And running Windows 7 on my Lenovo N200 0769.

  Any help or recomendatiosn will be appreciated.

  Thank you.

  Search for dust accumulates on the radiator cooling fins.

  Located under a Panel on the bottom, blow out with

  compressed air or using a soft bristle brush.

  And more ram (2 GB total) can't hurt!

• Missing pallets of sharpness and noise reduction

  I just exported some pictures for the web of Lightroom 5, which had to be reduced considerably. Now, I find that the range of reduction sharpening and noise disappeared completely from the right tools palette. What is going on? I tried quitting and reopening of Lightroom and also stop and restart my computer. (Macbook Pro retina and Mountain Lion)

  If you talk to develop Panel, right-click on a group header and make sure that the detail is checked.

• sharpening and noise in point 6.3 of ACR... advice please

  Hello

  Where can I find good tutorial (or other advice) stuff on the sharpness and noise in point 6.3 of ACR.

  My camera is a Panasonic DMC - FZ8.

  Adjustments like color / black / contrast I can 'see' on my screen (I am convinced so far).

  But the noise and sharpening... "It is a different kettle of fish"... I have problems with it... complex... (my std JPG is better than RAW - JPG).

  Basic rules are usually made to be broken.  They could provide a good starting strategy in many cases.

  The thread I did reference is: http://forums.adobe.com/thread/780678

  I reread and it's not that much more information on it.

  Keep in mind, there is nothing fundamentally wrong with an image file further.  If you are short of space, new drives are incredibly cheap these days.

  A good rule of thumb (!) is not save, then open, then resave JPEG files.  You can do it once or twice in a pinch, but the compression artifacts will be piling up, just like JPEG lossy compression.

  If a PSD file is growing like save for save, this may be because you're doing something for the image to the cause--for example, create new layers, or sharpening it and increasing the amount of detail apparent in the compression process must deal with.

  -Christmas

• Camilieo Pro HD - shakey pictures and noise while zooming

  I recently bought Camileo pro hd camcorder. I found some problem with that.

  1. when I take pictures (photos) it always shakey, I keep my hand steady but its still shakey, 95 photos on 100 are of bad quality. Let me know if there any adjustment required.

  2 when I take the movie, it creat engine noise while zooming and plays it as well as I play my recorded movie. that is that irritating noise was also recorded. Let me know if any solution available.

  If it comes to manufacturing defects I can return the product. Let me know as soon as POSSIBLE.

  Thank you.

  Hello

  If you are in record Mode, you must enable the stabilization of the Motion.
  To activate the stabilization of the Motion:
  In video/photo recording Mode, press the Enter button to move to the record menu.
  Use the left/right buttons to select movie Mode. Movie Mode submenu will pop out on the
  screen. Use the up/down buttons to select Motion stabilization and then press the Enter button to move to the
  Submenu of movement of stabilization. Use the up/down buttons to select ON or OFF. Press the Enter button to confirm the setting and exit.

  With regard to the noise of the engine;
  I m not very good, but maybe you could reduce the sound volume while recording don t know not if it be helpful, but you can try it.
  But usually the cam should record everything and all the sounds that are noticeable

• Satellite M40-184 and noise problem

  I bought two days ago, this laptop and I already found two problems. The first is that always before the speakers seem to start working a strange noise (ICT) and it is very annoying for me. Is there a problem with the speakers.

  The second problem is that when I use the laptop for more than two hours the AC adapter also makes a very annoying noise. He is also very strong (more strong that fans or anything else). Is it normal to do what noise?

  Thank you

  Hi Manos,

  I'm not sure of the sound from your speakers, normally I wait till they're totally calm, unless a job is running that use.

  Regarding your power adapter, should make any noise at all. It can become hot for what is quite normal. I would recommend the adapter/notebook back to your provider as soon as possible.

  Kind regards

• Qosmio X 300 - 15R - vibrations and noises

  Hello world

  about half a year (2009-09-03), I bought a cell phone game X 300 - 15R QOSMIO. Since the time of fisrt I started the laptop, he started making strange noises, as if something was loose inside its hull. He also shakes quite bad every now and then when I try to install a game in the DVD drive. A could not send it because I had to keep to work with. Now, my work is over a bit and I am determined to solve this problem! If anyone has had a similar problem, and if you did, how fix it.

  (EDIT: a little more information on the real problem; this happens at times random compeltely, but as soon as I put pressure on the shell under the keyboard, it will stop.) And when I let go, it starts again. What helps is also lifting up and duck, but it works for about 10 seconds and then the noise just started again. It starts to become very frustrating, I hope someone has a tip)

  Thanks for your precious time!

  Gr. Kevin Shuttleworth

  (contact me at: [email protected])

  Hey Kevin,

  I think it's really hard to say what is the cause because I can't hear the exact sound you mean. Theoretically, it might be a problem with the HARD drive or there is a screw loose inside this laptop.

  Normally it shouldn't t arrive and I recommend you contact an authorized service provider. Technicians can check your laptop and fix it for you. I guess that it of still under warranty, the repair should be free.

  Here, you can search for a service provider authorized in your country:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Construction of a waveform in a bit array and and noise sometida

  Hello world

  I have a binary table 1 & 0 and I want to build a wave of her form, each pulse with an interval of 500ms, adding little noise, how can I get it?

  LabVIEW version 2010

  Thank you

  
  

• Frequency of an analogue signal measurement and noise reduction

  Hello everyone.

  I'm reading a flow rate sensor that generates output signal square whose frequency has a linear relationship with the flow rate and varies from 37 to 550 Hz. My hardware does not support playback of the frequency, so I have to calculate. What I ended up doing was reading signal every 1 millisecond (1000 Hz), taking two samples spread and store the value of the signal and the time during which it was read. Every 400 milliseconds, I loop over the data and know how many cycles have taken place and the time between the first and the last cycle, divide the number of cycles at this time here.

  Here's a graph of the signal.

  

  I never use software loops timed then performing operations of data acquisition as a general rule. He's many trendy on negative issues. And as you mentioned that you cannot run a timed loop faster than 1 kHz. You should go to the Help menu in the toolbar, then select search examples. Then you look up "continuous acq. It is best to leave all the details of the calendar to the data acquisition unit and just retrieve data from the buffer of data acquisition, then it is needed. I have your case I would recommend a sample equal to 6 kHz freq. That's more than 10 times your highest frequency. You can always update your data at intervals to 400msec. Your signal also looks good. I can't have a lot of noise in your signal. If my guess is that your software is not optimal. You should not get 120 Hz, so there is no flow. If you post we can take a look.