read from bit hex

Similar Questions

• All of a sudden my 5.7 LR on win10 64-bit start fails with the error message something like "error reading from the cache of the preview... Please restart." reboot, repair, reinstall, or rename SLCache helps to repair.

  All of a sudden my 5.7 LR on win10 64-bit start fails with the error message something like "error reading from the cache of the preview... Please restart." reboot, repair, reinstall, or rename SLCache helps to repair.

  

  Hello

  Greetings!

  Close to Lightroom.
  Navigate to the location where the catalog is present (default value is within the pictures folder lightroom file)

  And delete the file previews.lrdata.

  Note: do not delete the catalog with the extension .lrcat file.

  Concerning

  Jitendra

• Satellite A100 - ATI Vista driver moved - cannot read from device

  Hello

  I have the following problem:

  I downloaded the official Toshiba mobility driver for Windows Vista 32-bit (I had a Satellite A100 (PSAA9) for construction in mobility x 1400.

  Once I run the Setup, it will install the ccc, but the real driver, no matter what I do! If I try to install the driver manually, Windows says

  "Unable to read from the device (ATI Mobility X 1400).

  As an error during the installation. It will not work in safe mode, either.
  If anyone can help? Thx a lot!

  Greetz Jens

  Hello

  First are you sure that you have an ATI graphics card?
  The Toshiba driver page provides 2 different graphics drivers for A100 PSAA9E series; nVidia and ATI.
  Find out!

• Could not read from the source. Please check if it is moved or eliminated

  Hi all

  When I try to make a project afx since media encode I get the following message

  "Could not read from the source." Please check if it is moved or eliminated.

  I read on the forum that this is due to an old installation of first.

  I use a brand new computer. the only installed software is my master collection cs5 and updates from the adobe Web site.

  Win7 pro

  I7

  16 gig RAM

  see you soon

  s

  I think that it maybe because - adobe cs5 installation of plug-ins in a central location

  C:\Program Files\Adobe\Common\Plug-ins\CS5\MediaCore

  (probably a file path different bit on a mac)

  Media Encoder cannot load these plugins.

  I tried to get out of there and put after effects plugins folder

  that seems to work for me

• Export to YouTubeHD fails in encode: cannot read from the source file

  
  -----------------------------------------------------------------------------

  This is my first time using Premiere Pro CS4 and everything is fine until I get this error message in the encoder: AMEEncodingErrorLog.txt
  -Source file: C:\DOCUME~1\DANNES~1\LOCALS~1\Temp\Calavo Intro.prproj
  -Output file: D:\My Documents\Adobe\Premiere Pro\4.0\Sequence 01.mp4
  -Preset used: NTSC DV high quality
  -Video:
  -Audio:
  -Bit rate:
  -Encoding Time: 01:45:37
  2010-08-23 19:45:56: encoding failed
  -----------------------------------------------------------------------------
  Could not read from the source. Please check if it is moved or eliminated.
  -----------------------------------------------------------------------------
  -Source file: C:\DOCUME~1\DANNES~1\LOCALS~1\Temp\Calavo Intro_1.prproj
  -Output file: D:\My Documents\Adobe\Premiere Pro\4.0\Sequence 01.mp4
  -Preset used: NTSC DV high quality
  -Video:
  -Audio:
  -Bit rate:
  -Encoding Time: 01:51:01
  2010-08-23 19:51:19: encoding failed
  -----------------------------------------------------------------------------
  Could not read from the source. Please check if it is moved or eliminated.
  -----------------------------------------------------------------------------
  -Source file: C:\DOCUME~1\DANNES~1\LOCALS~1\Temp\Calavo Intro_3.prproj
  -Output file: O:\Calavo\CalavoV1.mp4
  -Preset used: Custom
  -Video:
  -Audio:
  -Bit rate:
  -Encoding Time: 02:14:41
  23/08/2010-20:15: encoding failed
  -----------------------------------------------------------------------------
  Could not read from the source. Please check if it is moved or eliminated.
  -----------------------------------------------------------------------------
  -Source file: C:\DOCUME~1\DANNES~1\LOCALS~1\Temp\Calavo Intro_4.prproj
  -File: O:\Calavo\Sequence 01.mp4
  -Preset used: YouTube Widescreen HD
  -Video:
  -Audio:
  -Bit rate:
  -Encoding Time: 02:19:36
  2010-08-23 20:19:55: encoding failed
  -----------------------------------------------------------------------------
  Could not read from the source. Please check if it is moved or eliminated.
  -----------------------------------------------------------------------------
  -Source file: C:\DOCUME~1\DANNES~1\LOCALS~1\Temp\Calavo Intro_5.prproj
  -Output file: D:\My Documents\Adobe\Premiere Pro\4.0\Sequence 01.mp4
  -Preset used: YouTube Widescreen HD
  -Video:
  -Audio:
  -Bit rate:
  -Encoding Time: 02:23:38
  2010-08-23 20:23:57: encoding failed
  Page 1
  AMEEncodingErrorLog.txt
  -----------------------------------------------------------------------------
  Could not read from the source. Please check if it is moved or eliminated.
  -----------------------------------------------------------------------------
  -Source file: C:\DOCUME~1\DANNES~1\LOCALS~1\Temp\Calavo Intro_6.prproj
  -Output file: O:\Calavo\CalavoV1.mp4
  -Preset used: YouTube Widescreen HD
  -Video:
  -Audio:
  -Bit rate:
  -Encoding Time: 02:37:30
  2010-08-23 20:37:49: encoding failed
  -----------------------------------------------------------------------------
  Could not read from the source. Please check if it is moved or eliminated.
  -----------------------------------------------------------------------------
  -Source file: C:\DOCUME~1\DANNES~1\LOCALS~1\Temp\Calavo Intro_8.prproj
  -File: O:\Calavo\Sequence 01.mp4
  -Preset used: YouTube Widescreen HD
  -Video:
  -Audio:
  -Bit rate:
  -Encoding Time: 08:39:10
  2010-08-24 14:40:19: encoding failed
  -----------------------------------------------------------------------------
  Could not read from the source. Please check if it is moved or eliminated.                                                                                                                                                                                                                                                                                                                                    Here are some details about my computing environment and this project which can be useful.  PC under XP Pro SP3 and is updated, I have a NAS 3TO where I store my videos and pictures as well as all my documents. The directories of film, photo and doc on this NAS are all drives mapped to my computer.   The project shows as 39 minutes long and consists of some .avi videos that I took with a Vado HD and lots of photos that I added narration to in Premiere pro.  Everything seems to work well when I start exporting. I can see the source and the output in the export Premiere Pro window, then when I press start the queue in Encoder CS4, the process fails and the yellow sign appears in the status column. By clicking on this sign performance opens the text messages I pasted in above. What I find particularly odd is that the error message trying to read a source file that is a temporary file on the C drive, rather than in the job file for this project, which is located on the D drive, a second HD to my computer where the Adobe Premiere 4.0 works directory is in the My Documents folder.                                                                                                                                                                                                                                                                                                                                                                                                                                            I have put a lot of time and effort into this project and I'm very happy with it, I just need to get it online.  I'm very grateful for any help you can give me.  Thank you.

  This might do the trick

  http://kb2.Adobe.com/CPS/407/kb407106.html

• How to read from a device gpib in Visual Basic

  I have trouble reading from my device. Can someone give me an example so I can fix my code?

  
  

• 24-bit hex 2 Add-in

  Hello

  I need help with this problem, I have 24-bit hex data inbound and required for the output of the complement of 2 signed numbers. The parties work separately but not together. Any help would be appreciated.

  LabView 2011. If necessary, I can post a version especially.

  Thanks in advance.

  The problem in your first VI is that you use the hexadecimal string for the number function.  But you do not have a hexadecimal string.  Would be a string as 6 characters 7 F.  You have a string of 3 bytes 7F FF FF.  You just need to use the conversion you have.  But you first need to add a byte zero at the front of this so that it turns correctly in the I32 data type.

• I'm looking for the 8th bit of a 13-bit-hex digit

  Basically, I have a 13-bit-hex figure, now I want to find the 8th bit of sales and output. How can I achieve it. I definitley tried but none of them worked.

  Thank you very much

  It seems you want the figure 8, not the 8th bit.  Make your mask 0000000F00000.  Who should choose the number you want. You may need to do a few extra things to get right and not 0000000C 00000.

  Lynn

• Problem reading from a configuration file that was edited in Notepad

  Hi all

  When I try to read a configuration file (which was edited from Notepad) using OpenG (read INI Cluster) I get no output function. Debugging for the question I tried to read the same file using read from text file function. The result I got is as follows:

  See here: Config file "byte order mark"

• How to write constantly to analog output and read from analog inputs

  Hi all -

  I had a question about writing continuously to analog output reading simultaneously an analog input.

  It's my first time to post a message to the community, so please let me know if I made mistakes.

  I use Labview 2011 with a NEITHER-DAQ USB 6215.

  I'm looking to generate a waveform and write it continuously in an analog output. It is then connected to an entry on the acquisition of data, where I am trying to sample the analog signal. (I realize, there is a system of trivial, but I'm hoping to build on it once I have run).

  The task of reading from the analog input works fine, as I tested it in several other cases. I have a problem writing to the analog output.

  For this task, I tried to follow the "Gen Cont Wfm Clck Int' VI to generate the wave form and start the task. I then try to write to the output of the analog timed loop. However, it does not seem to transmit a signal and doesn't give me any errors.

  I have attached the VI but also a screenshot.

  Please let me know if anyone has any ideas. I would really appreciate the help!

  Thank you

  Peter Borgstrom

  We will review your tasks one at a time.  First of all, the task of generation/Analog output Waveform.  Generate you a waveform (I'm unsure of your VI if it is a fixed waveform or not) and send it to a defined output function to produce a waveform continuously, using N-channel and samples of N (where you set not these previously).  You should not put this inside has timed loop, as the DAQ hardware has its own clock - if you simply put it in a while loop (with a stop to break out of the loop), the loop will call the function for the first points of N, wait until all N have been taken out, then call it again to another N points (up to what you press Stop).

  Now, suppose that you have the output connected to a load voltage (say a decent resistance).  You can wire the input terminals of your A/D converter through the same load and set up a similar analog input loop, running in parallel (i.e. in its own independent of the OD loop, while loop).  You pourriez start together (with, say, a merged error since the initialization code line loops HAVE and AO become lines of error in "loops of sampling" described above), but you might want to delay loop (a little) the AI so that the OD has a chance to set the voltage before the bed.

  I hope this helps.

  BS

• Error: Access violation at 0 x 00509273 (tried to read from 0x00000020), program terminated.

  How can I fix it?  Any ideas appreciated!  = o)

  Error: Access violation at 0 x 00509273 (tried to read from 0x00000020), program terminated.

  Hi lbonnell,

  1. when exactly you receive the error message?

  2. what game you try to play?

  If you try to open a game, you can run the game as run as administrator.

  For more information, refer to this link: to start a program as an administrator

  Hope the helps of information.
  Please post back and we do know.

• My husbands e-mail has been hacked, now its msn.page is in Arabic and his e-mail now read from right to left

  Original title: Publisher

  My husbands e-mail has been hacked, now its msn.page is in Arabic and his e-mail now read from right to left

  His name is * address email is removed from the privacy *

  can you help me

  Bob Davis

  Thank you

  Hello

  The question you have posted is related to MSN and would be better helped by MSN support. Please visit the link below which offers the best support.

  https://support.MSN.com/default.aspx?mkt=en-us&WA=wsignin1.0&St=1&wfxredirect=1

  Hope this information is useful.

• whenever I try to play the keys to Manhattan, I get an error violation: access to 0 x 00431467 (tried to read from 0x00000000), has been abolished

  original title: error: 0 x 00431467 of access violation

  whenever I try to play the keys to Manhattan I get error violation: access to 0 x 00431467 (tried to read from 0x00000000), has been abolished, what it means and how to fix

  Hello

  I suggest you try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• Message when you try to upgrade or install a program. "A network error occurred whtile attempted to read from the file:

  Receive the following message when you try to upgrade or install a program. "A network error occurred whtile attempted to read from the file?: MSI

  * original title - cannot open files with .msi extension *.

  You try to open this leave a link online? If yes I would like to try and save the MSI on your desktop and then try to open.

• Network error when you try to read from C:\Windows\Installer\iTunes.msi

  Original title: error when you try to install iTunes on Windows Vista
  I am trying to install the latest version of iTunes available in South Africa. I use Vista to the Windows Welcome page.

  I downloaded the itTunessetup.exe file, but when I try to run the installation, I get the same message "network error when you try to read from C:\Windows\Installer\iTunes.msi.
  I am at a loss to understand this - I'm not much of a PC expert either.
  Any suggestions? Thank you

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question. I suggest you follow the troubleshooting steps to check if this may help.

  Method 1:
  Run the fix it and check.
  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:
  You can completely uninstall older versions of iTunes installed on the computer, then I suggest you to install the latest version and check.
  Download link

  http://www.Apple.com/iTunes/download/
  
  Method 3:
  You can try the form as follows article knowledge base and check if you are able to install iTunes.
  Problem installing iTunes or QuickTime for Windows
  http://support.Apple.com/kb/HT1926

  Reference link:
  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  If the problem persists then you can contact iTunes support: http://www.apple.com/support/itunes/
  Just reply with the results. I'd be happy to help you more