Use the ADF security to grant access to the application

Similar Questions

• I downloaded an app from a worker ID mobile shop and I am still registered my ID and I am using the application normally but I wonder if he could access this application and see my pictures and conversations!

  I downloaded an app from a worker ID mobile shop and I am still registered my ID and I am using the application normally but I wonder if he could access this application and see my pictures and conversations!

  Any help please?

  N ° unless you have given him your Apple ID and password, in which case he would have access to your entire account.

  You must download the application using your Apple ID. Otherwise, you will have questions the next time the app must replace or update. Strictly speaking, what you were doing was not quite legal, oven if it was a free app.

• .exe white screen after you have used the application on a programme of work Builder.

  Hello

  I am new to Labview development and I have a problem.

  I changed an application to fit my needs and when I run it there is no problem (Labview 7 Express) in debugging.

  After using the application builder to build my new soft, I have a white screen at launch.

  I tried before using the application generator and succeed with this same software (when my changes were in progress), and it worked.

  Do anyone have an idea? You need more info?

  Thank you.

  
  

• Application in VSOM report (using the Application layer in point 6.1)

  Hello

  I am producing a report for applications 6.1 VSOM (I added manually for an application levels), I tried to show the resources devoted to the application and each of the levels in a report, but I can't get the name of the Application or the bleachers is displayed in the report. I'll try to use tags, but they will not be displayed in the report. As an example would like to see:

  Name of the App or level

  Total resources of the virtual machine within the app

  CENTRAL PROCESSING UNIT

  MEMORY

  DISC

  Someone has something like this happening using the Applications section in VSOM?

  Thank you

  I was able to complete this using VSphere marking and using the functionality of the Application in VROPS.

• just downloaded adobe first, but the open choice is not activated so I can start using the application. What should I do?

  just downloaded adobe first, but the open choice is not activated so I can start using the application. What should I do?

  Hello

  Please try to open the application in the menu (Windows) programs / library of the application (Mac) and see if it works.

  You can also check the following links

  Apps Control Panel does not show installed Adobe Creative Cloud applications

  Desktop application Adobe Creative Cloud lists uninstalled Adobe apps as up-to-date

  Pre-installed applications not shown as it is installed

• I have a proof of purchase of my Adobe CC license, but according to the site and the app I'm in a free trial. I just got a new Mac and everything transferred and has been using the application on an old PC for a while so I'm not sure is this is what is ca

  I have a proof of purchase of my Adobe CC license, but according to the site and the app I'm in a free trial. I just got a new Mac and all transferred to an older Mac and has been using the application on an old PC for a while so I'm not sure is what is causing my problem. I have bank statements indicating payments of my subscription to Adobe for this product update.

  Hi Seth,

  First of all, disconnect, then back into creative cloud, using adobe id to pay for your subscription.

  https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  Then, if you launch any product of CC 2015 and the pop up still shows a trial message window, please check this link for the resolution:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

  Hope this helps!

• I bought lightroom 6 for my mcbook pro in June, installed and used one or two times very well.  (I also had a version of lightroom track 5 and separately installed creative cloud before buying 6)  I haven't used the application a few months

  I bought lightroom 6 for my mcbook pro in June, installed and used one or two times very well.  (I also had a version of lightroom track 5 and separately installed creative cloud before buying 6)  I haven't used the application a few months and tried to open it this week without success, it launches the image of the foliage of the forest and freezes.  I uninstalled the version of lightroom 5, nothing helps.

  Hi Cyril,.

  If you are using the trial of both creative cloud, please uninstall it from the computer and try to revive the Lightroom.

  Thank you

• Adobe lightroom does not update when I use the application manager to download upgrades.

  Hello

  I have problems with adobe lightroom.  It is not updated when I use the application manager to download the new updates.  I tried to uninstall the application and re-download it, however the application manager will not allow that to happen because it shows that it is already installed and up to date. I think that the problem may have started when I installed lightroom using a link which you offered when creative cloud first started offering of lightroom.  This version of the program does not appear to work with the application manager.  Please let me know what I should do to fix the problem.

  Best regards

  S

  Hello

  Please, try to remove Adobe Extension manager and install again. The reinstallation of the extensions Manager try to day light the room.

  If it does not resolve that question please make a complete own using adobe cleaner tool and reinstall everything.

  Thank you

  Kapil Malik

• Update IDSM2 5,0000 S225 to 5.1 using the application partition

  can I switch an IDSM2 (WS-SVC-IDSM2-BUN) in a 5,0000 S225 5.1 6513 by copying the partition of 5.1 application on the sensor

  [Correction to the userguide cisco]

  Chapter 10 Configuring the sensor using the CLI

  Modules and devices available

  Reimage on JOINT-2

  This section contains the following topics:

  Catalyst Software, page 10-124

  Software Cisco IOS, page 10-126

  Catalyst Software

  To reimage the application partition, follow these steps:

  Step 1 get the file from the software Center on Cisco.com and copy application partition

  it to a FTP server.

  Step 2, connect to the switch CLI.

  Step 3 start the JOINT-2 to the maintenance partition:

  cat6k > (enable) reset module_number cf:1

  Step 4 connect to the partition maintenance CLI:

  Login: guest

  Password: cisco

  Step 5 Reimage the application partition:

  [email protected] / * /# ftp://user@ftp server IP/directory update

  file access/image path

  Step 6 specify the FTP server password.

  After the application partition file has been downloaded, you are asked if you

  you want to go forward:

  The upgrade will scan the content on the hard drive. Do you want to

  Continue to install [y | n]:

  Step 7 type y to continue.

  When the application partition file has been installed, you are returned to the

  maintenance CLI score.

  Out of step 8 maintenance partition CLI and go back to the switch CLI.

  Step 9 reboot the JOINT-2 for the application partition:

  cat6k > (enable) reset module_number hdd:1

  Step 10 when the JOINT-2 has restarted, check the version of the software.

  Step 11 in the partition CLI application log and initialize the JOINT-2.

  Page 10-2, in view of the procedure, see initialization of the sensor.

  IF NOT, THEN IS IT SHORTENED 4.1 to 5.1?

  I was in the middle of editing my answer when he entered, check again. There is the question of "fact the maint.". partition must be upgraded? "and I have identified patches and GIS level to apply later.

• When you use the application phone on my Droid, the screen flashes

  The phone is a Droid that is original, bought in December 2009 at Costco.  The service provider is Verizon.

  For example, when I call automatic CVS Pharmacy prescription refill service, the screen flashes and is mainly off makes it difficult-not impossible to enter a list of numbers of RX to recharge.  It is repeatable.

  I tried to use the phone to access the payment system of automated mortgage payment to my Bank, a large National Bank and had the same results. It's also repetitive.

  I am running firmware version 2.1 - update1.

  I'd appreciate any help anyone has this problem.

  Thanks in advance,

  Glen

  I think your problem is that your fingers trigger the proximity sensor.  When you enter the numbers on the phone during a call make sure you hit the first speaker key.  This will disable the proximity sensor and the screen will not virgins on you you are trying to enter numbers.  I hope this helps.

• TestStand fails to use the application with custom user settings

  Hello

  For a project of teststand, I use a .net application that uses a custom settings provider. The problem is that whenever he tries to use one of the teststand user settings, the application returns an exception:

  "Unable to load the provider type.

  I tried to illustrate the small demo project that I have attached.

  The .net application I call of test bench is AppWithUserSetting, and is one of the steps in the q.seq file in sequence to get a value from a user setting. That's where it crashes for me.

  On the other hand, if I instantiate the same objects and read the same setting from another application .net (DoLikeTestStandApp), everything is fine.

  Note that in the AppWithUserSetting settings.designer.cs file, a custom line has been added ([total:ystem.]) Configuration.SettingsProvider (typeof (AppWithUserSettings.UserAppSettingsProvider))]) to force the program to use the custom SettingProvider. And that's where it fails when loading teststand.

  No idea why? Right now, I'd rather not remove the use of this settingProvider custom because it will keep the settings of the user even when the upgrade to a different version of AppWithUserSettings.

  Thank you and best regards,

  Loïc

  PS: I use studio VS 2008 SP1 and Teststand 4.1.1

  Loïc-

  Like Doug mentioned, you are running in an issue similar to that of the other forum thread, he did. I went ahead and implemented workaround for this problem in your example and attached it below.

  I hope this helps. Let me know if you have any questions.

• How to add third-party DLLs in our Setup program by using the application builder?

  Hello friends,

  I have one (VI) application that uses a third party to the Protocol dll, and now I want to do an installation which should install dll as well as the application exe. Please suggest how...

  Thank you

  Hello friends,

  I found the solution to my problem, thank you to all who have shared time on it...

  Quick fix was to allow Boolean register in the attribute file of these DLLs being created for installation...

  Thank you

• Restore points system & using the applications of optimization/defragmentation

  RE: System Restore & use 3rd party defragmentation & software optimization with XP Pro

  How a system restore point previously affected by the future use of defragmentation/optimization?

  that is, can 'restore you still successfully' points implemented before execution of programs of optimization/defrag on your hard drives?

  I heard this interview can damage the restore points beyond their ability to recovery/restoration with some Windows operating systems

  
  

  Hello cdbob

  I never heard this theory.

  I used the party defragmenters 3 years and have never had a problem to do a system restore

  .

• How to use the application element in the page template

  How to use the point of application in the page template.

  Thank you

  Rajendra

  I found out the answers, you can use & application_item.

  Thank you

  Rajendra

• Problems with signature while using the Application Builder

  So, I just went to create my application with applicationbuilder3.0 and I got this error. Anyone see this before? I went through the creation of p12s and files certificates and provisions three times now and it still does not work. I use the same e-mail address for all - so I have no idea how it would not match. Thanks in advance for any help!

  

  There is something wrong with your provisioning profile. Remove all the p12 and provisioning of the files that you have done as an attempt to get this working and then follow the steps in our guide publishing, starting on page 17, exactly: http://help.adobe.com/en_US/ppcompdoc/Adobe_Publishing_Companion_Guide_for_iPad.pdf.

  Neil