Graphics performance significantly reduced after an update

Similar Questions

• Cannot connect to the network or perform system restore after installing updates have been

  WIN 7 Home Premium running on a gateway PC connected to the internet via an ethernet connection using a RealTek network adapter for the past 5 years with no problems. Running Avast Pro antivirus / internet security.  09/02/2016, Microsoft and Avast downloaded and installed updates on the PC.  After the PC auto-redémarré as part of the Microsoft updates, I couldn't connect to the internet.  Connect to the network now says unidentified network - no network connection.  The adapter looks like to she always sees the (watch 100 Mbps) connection, but no data packet move.  Device Manager indicates that the unit is working normally.

  I ran through the resolution of the problems of Windows network. I checked the cable was attached, reset the home modem, reset the adapter (toggle), uninstalled/reinstalled using the latest adapter driver available.  I have disabled the Windows Firewall because Firewall Avast wouldn't start.  I disabled all the Avast settings to see if it eliminated the problem.  I tried to run the system restore before the updates but continue to spread the message that there was an unexplained error and restore failed.  All this was done in Normal mode. I restarted mode safe and had the same problems without success.

  I was able to clear the problem by manually uninstalling updates of security Windows which were loaded on 09/02/2016 through the programs and features Control Panel. Then I did the repair of Avast program operation.  I rebooted the computer and the internet connection worked. Then I reinstalled manually updates Windows security on the Windows Update program.

• After Windows updates Feb 10-11, I "bmmp" noise in my audio which effects my audio/video performance.

  * Original title: System Restore

  Windows 7 Home Premium

  Dell XPS L502X

  Intel Core i7-2670QM CPU @ 2.20 GHz

  8 GB RAM

  After Windows updates Feb 10-11, I "bmmp" noise in my audio which effects my audio/video performance. The video freezes for a split second. I tried system restore several times, but my computer could not be restored to several dates I've tried. If I do not solve the problem today, tomorrow morning I'll try an advanced recovery method. I have a Windows 7-64 bits of the operating system at the same time, graphics cards Intel and Nividea. I had this same problem several times since I got the computer (Dell). Dell has replaced some hardware. Previously, he was my Western Digital external hard drive software that caused the problem. After that I deleted the software from the computer, the problem has been resolved.

  Does anyone have any ideas on how I could get the system restore to work? Or another suggestion that might help solve the problem?

  Thank you

  Joe

  Hello

  This can help you:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  AVG will cause problems with SR too.

  «Temporarily disable AVG»

  http://www.Avg.com/ww-en/FAQ.Num-3857

  2. try to use Safe Mode system restore.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  "Start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________________

  And some information for you about Windows updates:

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update - Windows 7'

  http://Windows.Microsoft.com/en-us/Windows/remove-update#1TC=Windows-7

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• Why the performance decrease after installing updates...

  Ideas

  • You have problems with programs
  • Error messages
  • Recent changes made to your computer: i want to know that why the OS performance begins fall after some time its installation .i want to know what's due to updates or is - it something else causing my laptop startup time and performance fall as new updates are installing...
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello Raghav Kabra,

  Thank you for your message.  To clarify, is the performance of your computer when you install/download updates Windows or after you have started for the first time trolling, because updates have taken effect?  If this is the case, the reasons could be:
  1. in the download, you'll be using your internet connection, which will slow down your bandwidth as well as the use of processing power to perform the update.  A little dip lag or performance would not be out of the question here.
  2 when you install updates, the processor will work to install the necessary files that have been downloaded on your computer which may cause a dip in performance.
  3. When you start your computer for the first time after an update, you may experience a longer period of logon, because the computer to initialize all the updates that you have just downloaded and installed.
  If you encounter a performance problem, every time that you start your computer, you may need to make some changes that will allow your computer to work optimally.
  Click HERE for some useful methods for better performance on your system.
  Please let us know if it did or did not answer your question.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• machine is trying to perform a PXE boot after installing updates-"operating system not found error" when PXE boot

  Original title : Aucuns OS after installing updates save broken disk how to reinstall windows vista

  I installed the microsoft updates on my Vista laptop and now the system does not start. Error message is:

  Check the connection of the cable! PXE - MOF:
  exit Intel PXE ROM.

  Operating system not found
  Backup of disks were damaged
  starts from disc downloaded ubuntu, so no problem with a hard drive.
  Cannot access then unable to return to the last good configuration safe mode?
  where can I download vista to reinstall?

  Hello

  Contact your computer manufacturer and ask them to send a set of recovery disks Vista.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Read the responses in these links on the false boot order and network devices.

  http://www.techsupportforum.com/forums/F16/PXE-MOF-exiting-Intel-PXE-ROM-41235.html

  http://www.computerhope.com/issues/ch000706.htm

  See you soon.

• Satellite A500 emit after bios update 1.50

  Hey guys and girls,

  I have some problems after the update of the bios. Before the update my laptop has been the scene of much smoother and everything was fine and dandy until Tempro told me to update my bios. The problem is that after the update, the temperature seems to be considerably higher as usual when I play the game (I am a gamer) and also all the games I play seems to be much slower than before (lower, gal frame rate). Before the update I could play Dragon Age Origins with 1366 x 768 with 4 x anti-aliasing and the only one that I could get the same performance with the graphic parameter above is on 800 x 600. Now, it is certainly a big problem for someone who is a graphics junkie when it comes to games.

  * What do you think I should do? *

  A. downgrade my bios for when I bought everything first? (I don't know what version of bios is if anyone knows the stock bios?)
  B. perform HARD drive recovery?
  C. clean install of Windows 7 64-bit?

  My laptop computer spec:

  Model name: Satellite A500
  Part number: PSAR3E-00N005EN
  Serial number: X9206227K
  OS version: Windows 7 64-bit Home Premium edition
  BIOS version: 1.50
  Physical memory: 4096MB RAM
  Graphics card: NVIDIA Geforce GT 230 M

  Any help with this is greatly appreciated.

  Post edited by: Poyzen

  Hi mate

  I think you had a version of BIOS 1.30
  In older versions of the BIOS update are not available on the Toshiba driver download page. Only ASP (partner) has access to these early BIOS versions

  In any case, I found an interesting thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=50577

  Not sure if it could be useful but check

  PS; the graphics card driver update is a good idea it too check

• computer does not work properly after the update, because the screen is black.

  Advice please! :-(

  After an update there about 2 months, my computer has never worked properly after that I turned it back. My windows start page is longer there. My screen is black. The words are only in white and fluorescent yellow...

  The only way I can go online to find Norton (is always at the bottom of the black screen) and go to help. I can get a search bar like that. Almost as if this black screen hides everything below.  Computer is 13 months old.

  My internet provider says it isn't them. Gateway said it's not my computer so idk what happened after this update.

  Any advice would be so appreciated.

  Thank you.

  Hi Patty,.

  Welcome to the Microsoft community. I would be grateful if you can answer these questions.

  1. You have installed the latest drivers for Windows 8?
  2. What is the model number for Gateway computer?

  If you get a black screen after upgrade to Windows 8, it might be due to an outdated or incompatible graphics card driver. Update to the latest version of the display driver should fix this.

  Try to remove all external devices connected to the computer and then try to start the computer and check if it works. Follow these methods and check if that helps:

  Method 1: To resolve this problem, update the Gateway website. video card driver

  Step 1: Check out these Microsoft items for additional reference:

  Download and install the drivers

  http://Windows.Microsoft.com/en-in/Windows-8/all-drivers

  Step 2: If you are not able to find drivers for Windows 8 to HP support. Try to install the graphics drivers in compatibility mode and check:

  Download your applications and devices in Windows 8.1

  http://Windows.Microsoft.com/en-in/Windows-8/get-apps-devices-working

  If the problem persists, proceed to the next method.

  Method 2: I suggest to follow the suggestions provided in this Microsoft KB article and check if this can help:

  Windows 8 starts with a blank screen after a standard or hibernation

  http://support.Microsoft.com/kb/2756559/en-us

  See also the suggestion provided by Scott (owner of Forum) from this thread and check if this may help.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/black-screen-when-logging-into-Windows-80-or/93bb4530-C31C-4a2d-91e6-7ec2fc420379

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• On Windows 7, after the update of Lightroom 2.6 to Ligthroom 6 I am unable to fix photos [was: Hello,]

  On Windows 7, after the update of Lightroom 2.6 to Ligthroom 6 I am unable to correct photo

  The program (Lightroom 6.3) systematically freezes and needs closure after every temptation of correction development.

  The development and mailing of the crush program program ' are at Microsoft did not help.

  My system dump here:

  Lightroom version: 6.3 [1052427]
  License: Permanent
  Operating system: Windows 7
  Version: 6.1
  Application architecture: x 64
  The system architecture: x 64
  Number of logical CPUs: 4
  Processor speed: 2.5 Ghz
  Built-in memory: 8155.1 MB
  Memory real available pour Lightroom: 8155.1 MB
  Real memory used by Lightroom: 1035.4 MB (12.6%)
  Virtual memory used by Lightroom: 1007.6 MB
  Cache memory size: 100.3 MB
  Maximum number of links used by Camera Raw: 4
  SIMD optimization of Camera Raw: SSE2, AVX
  The system DPI setting: 96 DPI
  Composition on the Desktop enabled: Yes
  Views: 1) 1920 x 1080
  Input types: multipoint touch: no, touch integrated: no, built-in pen: no, touch external: no, External plume: no, keyboard: no

  Parents to the graphic processor information:
  AMD Radeon HD 7800 M series

  Check the supported OpenGL: past
  Vendor: ATI Technologies Inc.
  Version: 3.3.13399 context 15.200.1062.1004 the base profile
  Renderer: AMD Radeon HD 7800 M series
  LanguageVersion: 4.40

  
  The application folder: C:\Program Files\Adobe\Adobe Lightroom
  Access to the library path: E:\Lightroom\Lightroom catalog Qnap - 2.lrcat
  Settings file: C:\Users\Joe\AppData\Roaming\Adobe\Lightroom

  Installed modules:
  (1) external module connected mode Canon shooting
  (2) external module of shooting in connected mode Nikon

  Markers Config.lua: no

  Adapter n ° 1: supplier: 1002
  Device: 6827
  Subsystem: 31e1002
  Revision: 0
  Video memory: 1003
  AudioDeviceIOBlockSize: 1024
  AudioDeviceName: 1 - Philips FTV (AMD High Definition Audio Device)
  AudioDeviceNumberOfChannels: 2
  AudioDeviceSampleRate: 44100
  Build: not initialized
  Direct2DEnabled: false
  GPUDevice: not available
  OGLEnabled: true

  Thanks for the help!

  Go to Preferences, click the performance tab, and then uncheck the box.

• Graphics WMF look Terrible after the re-opening of InDesign file

  I hope someone can provide the answer to this one, or at least a decent work around.

  Very detailed drawings are provided for me (the author of technology) in the form of graphics of Windows Meta file (*.wmf).

  I have to take these designs and import them into my files InDesign V.6 (CS4) using the command set under file.

  The graphics look good immediately after I import them. If I print the file in PDF (Adobe 9.0) before closing the file, they look in PDF as well.

  The problem: if I close the file and then reopen it, the schematic graphics look absolutely terrible. as they have 'removed' or something. The number of labels is completely indistinguishable and rasterized. Print to PDF does not improve the aspect (but does not seem to make it worse, if that's even possible).

  So, the problem lies between the time wherever I finish (after registration) of the file and the time I re - open. ID is to reduce the graphic quality of these WMF drawings on save/close the file and I can't find the solution.

  Technical details:

  System: PC, Windows XP Professional, Version 2002, Service Pack 2

  Adobe CS4: InDesign Version 6.04

  Thank you for your time and your attention. I will be happy to provide more details to get the answer to this question.

  -WPH

  You can embed PDF files in ID files without damaging the file at all. Go ahead and try and then look at the PDF file.

  There is no way to tell which content was a part of the PDF and who was content ID native.

  Check your setting to view under view > display performance.

  Bob

• buttons (F1, F2) lighting control doesn't work after driver update chart 10 bootcamp windows

  Hi, after last update graphics driver via the apple software update in windows 10 macbook pro retina 15 "(mid-2015), buttons (f1, f2) lighting control is responding more... tx for any help. Michael

  On the side of OS X, download BC drivers on a USB FlashDrive to aid

  

  Re-run setup.exe from the Bootcamp folder on the USB after Windows and test.

• Why Firefox run/open to all, any how I try to start, after being updated to v41.0.1?

  After the update for Firefox 41.0.1, yesterday I'm not able to start or open Firefox. My operating system is Windows XP. I have received no error messages and have no reason to think that the update failed. I scanned my computer several times and have no reason to think that I have no viruses/malware/etc... All other browsers are functioning normally and my computer does not have other symptoms that I noticed.

  A window saying that Firefox would be updated after its restart or the next time I opened it, and I shortly thereafter turned off my computer. When I turned it back on and tried to start Firefox, nothing happened. I tried to open it via the Run..., by clicking the shortcut on the desktop, by going to the Firefox folder and try to start from there, and every other way that has been suggested by several pages here. Nothing works. No matter what I do, the Task Manager shows never firefox.exe is running. As a result, I couldn't try all alternatives that rely on my being able to use Firefox in some way. However, I tried all the other suggestions. Nothing has worked. I can not yet use the Profile Manager; When I try, nothing happens. Like most pages sternly warn me that reinstall or downgrade Firefox will either do nothing, or be dangerous, that I have no idea what else to try. I suppose that, at this stage, that means probably I'm missing something obvious, but I still have no idea what I might be missing.

  Thank you very much in advance for your help! It is GREATLY appreciated.

  Hi, take a look at this first - Firefox does not start - solutions, but if anything can help, it may be that this can be resolved by performing a clean reinstall. This means that you delete your Firefox program files, and then reinstall Firefox. This process does not delete your Firefox profile (such as bookmarks and passwords) data, since this information is stored in a different location.

  To do a clean reinstall of Firefox, follow these steps: Note: you can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from mozilla.org office (or choose the download for your operating system and language on this page) and save the file to install it on your computer.
  2. Once the download is complete, close all Firefox Windows (or open the Firefox menu

     

     Click the close button

     

  ).

• Remove the Firefox installation folder, which is located in one of these locations, by default:
  • Windows:
    • C:\Program Files\Mozilla Firefox
    • C:\Program Files (x 86) \Mozilla Firefox
  • Mac: Delete Firefox in the Applications folder.
  • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
• Now, go ahead and reinstall Firefox:
  1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
  2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

More information on the resettlement of Firefox can be found here.

WARNING: Do not use an uninstaller to third parties as part of this process. This could permanently delete your Firefox profile data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. They can be retrieved easily unless they have been backed up on an external device! See back up and restore the information contained in the profiles of Firefox.

Please report to say if this helped you!

Thank you.

• Safari freezes when I use the button "share" after OS updated 10.11.5

  Since I upgraded to OS X to 10.11.5 I can no longer use the ' share' button as it freezes Sarari. If Safari is open in multiple windows, it freezes only the active window. Pls does anyone know a fix?

  10.11.5 - Safari 9.1.1 - MacBook Pro OS (retina, 13-inch, mid-2014, 2.6 GHz Intel Core i5, 8 G 1600 MHz DDR3)

  Hello..

  Safe Mode boot removes the system caches can help after an update.

  Follow these steps to start in safe mode.

  Start or restart your Mac.

  As soon as you hear the startup tone, hold down the SHIFT key.

  Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Then launch Safari and try to use the button share.

  On Safe Mode

• After the update to the latest version of iTunes, it includes the error message 'Push Apple has stopped working' and ITune could not be started

  iTune cannot be started on Win 7 after recent update with error message "Push Apple has stopped working"

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• Want H8-1534: could not start HP Envy H8-1534 pc after Windows update 10, 1607

  Windows 10 has made automatically update 1607 (KB3176936) on the pc of my wife (HP Envy H8-1534) about 6 days ago. Since then I could not start the pc the first time I turn it on.

  When I hit the power button on the monitor lights up with the HP logo on black screen as usual but the loading icon (spinning points) does not start. Fans start, but there is no activity on the Tower in the way of flashing lights or beep sounds. If I turned off the pc by using the power button, wait 10 seconds and turn on again, the pc will start up as normal. So far, for the last 6 days, it took the 2nd attempt so that it starts the pc every time. It almost seems as if there are not able to go to the system except for the fans in this first attempt to start.

  I ran a test at startup by pressing the F2 key without no problems found. I disabled the SATA power management in the BIOS. I ran the Windows startup with no result repair. Here are the results of the txt file.

  I researched all the possibilities. I fear that this could begin to worsen. Any help will be appreciated.

  Name: Target OS Test
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 265 ms
  The test is performed:
  ---------------------------
  Name: Checking content Volume
  Result: Completed successfully. Error code = 0 x 0
  Setting time = ms 2391
  The test is performed:
  ---------------------------
  Name: Diagnostic Boot manager
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 63 ms
  The test is performed:
  ---------------------------
  Name: Diagnosis of the system startup log
  Result: Completed successfully. Error code = 0 x 0
  Time = 0 ms
  The test is performed:
  ---------------------------
  Name: event log diagnosis
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 62 ms
  The test is performed:
  ---------------------------
  Rated: Internal audit of State
  Result: Completed successfully. Error code = 0 x 0
  Time = 0 ms
  The test is performed:
  ---------------------------
  Name: Start-up condition Test
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 31 ms
  Root cause found:
  ---------------------------
  State the start indicates that the OS booted successfully.
  ---------------------------
  ---------------------------

  DBHPENVY,

  I turned off quickly startup on the pc and until now he started first try twice. I'll let you know how it does after a few days of testing.

  I read everything it does and it is perfectly logical, how it might affect our pc is the way. Go to this link and read about it and see if she could help. I thought I had turned off fast start already, but after an update he might have gotten turned on.

  Here is the link: http://www.tenforums.com/tutorials/4189-fast-startup-turn-off-windows-10-a.html

• Satellite Pro P200-15W: after Bios Update 1.90 incredibly noisy fan

  Hi, I have a Toshiba Satellite Pro P200-15W, I recently made an update to BIOS version 1.9 and seems to have been a big mistake.
  After restarting the computer, I had a lot of software deconfig and the fan has become incredibly noisy.

  I have the problem with the Toshiba Vista registration software, I get this message: "registration of Vista has stopped working". I read other discussions, I don't want to just disable it in the start.ini file, I would actually solve the problem if there is a way.

  Is there a way to change the configuration of fans? I read a post from Toshiba on another model of laptop that has had the same problem of noisy fans after an update of the BIOS, they gave that a solution with a new version of the BIOS, is there a way to reverse the BIOS to the previous version? (recovery CD will be useful for this purpose)?

  See you soon

  Edgard

  Hello

  It seems that the picture of the fan was changed and renewed in the new version of BIOS, and so fans run fall.
  Why the table fan has been changed?

  Well, usually something like this is necessary to improve the reduction of the internal temperature while the CPU and GPU are running with maximum performance.
  This helps to prevent the equipment from damage!

  Usually, the recovery CD formats the whole HARD drive (partitions too) and installs only the image of Toshiba on the notebooks of HARD drive.
  The image contains the OS, drivers and additional software and has nothing to do with the BIOS update.
  But you can try to recover the laptop to see if you can solve the problems of software as "Vista record"!

  If you want to reverse the BIOS, you will need to contact the ASP in your country!

  Sorry, but all I can suggest.

  Best regards