Great white - proc amp - cutting - YUV-RGB

Similar Questions

• Simple automatic cutting graphic black and white

  I have a lot of images that vary according to the size. All rooms have a simple black and white chart like the one shown below.

  Is there a way I can automatically crop these images as there is no superfluous white borders. Is that the harvest should touch the edges of the black areas. If all images have the same size, it would be easy, but this is not the case.

  Thank you.

  HLF

  

  Try the Image > Trim and see if it works for you.

  Note that there are all the foreign black/gray pixels in the white area is cut at this point. If this is the case you can first make an adjustment of threshold set pretty low.

  Paulo

• Someone at - it encountered problems with the iPhone 6 if weak reception. the phone goes crazy on his own? I have two employees in the SoCal area having this problem. Both have updated to IOS 9.2 to see if that helped. Any advice would be great!

  the phone goes crazy on his own? I have two employees in the SoCal area having this problem. Both have updated to IOS 9.2 and on the Verizon network. Any advice would be great! «The phone cut, connects during a call to Conference of someone else in (the phone chooses who to call), it basically starts random on the phone stock selection as if someone is trying to use it.»  It puts not only calls on mute.  The keyboard for contacts has been absent for a while, but is now back. "That's what they live. We tried to reset hard phones, the last option that we have not yet tried is wipe it off and start over, but I don't see that as a solution, since one is nine and the other is about 6 months with the same problems accurate.

  Hello FergusonChris,

  Thank you for using communities of Apple Support.

  I understand that your business has iPhones whose screens are behaving erratically.  Given your description of the issue, it seems that the screen may be dirty or there is the screen protector/case that interferes with the screen.  To further support this issue, please see the link below.

  If the screen of your iPhone, iPad or iPod touch does not respond to touch

  Take care.

• Adjustment of the white balance

  When you select a neutral grey target with the white balance tool, are the RGB values on the values of magnifying glass on average according to the scale of the magnifying glass? Then, the adjustment of the white balance done with this tool is on average to the pixels located under the microscope?

  You can test it for yourself.

  Zoom in on part of the image.

  White balance in hit W to get the tool.

  Click on a place for WB

  W success once again (unless you have set other autodismiss) wise

  Use your mouse scroll wheel to change size of the Magnifier and click again on the same pixel.

  The World Bank changes a little each time.

• Why is a not all gray gray RGB gradient?

  Why a black man by white gradient created in an RGB document have a channel B which differs the R and G channels?

  8-bit, only the 'gray' have value B incompatible mode and it seems to be more of them when the gradient is created by the tool degraded when it is a gradient fill layer. The difference seems to be 1 in the cases I've seen.

  In 16-bit mode, I see the B differ from the R and G by 7 to the black, reduce gradually from 0 to white.

  Before someone says, "Why do stories about the small differences?", I ask why there is no difference at all.

  -----

  Under the direction of details on the differences.

  .

  Got the b * stard!

  Something is wrong with the third gradient preset provided with Photoshop, named "black, white. Make a 16 - bit test - see if you get the wrong channel B with her.

  

  Black judgment which produces 16-bit RGB (0,0,7) are:

  

• YUV processing

  Hello world

  I have a question about YUV processing in Premiere Pro, especially on blend modes.

  Made the process of Premiere Pro mix modes on YUV two clips in YUV space color, or does perform YUV-> RGB-> YUV conversion, and all the mixture gets to be in RGB?

  In addition, if such a conversion takes place, what matrix is used for YUV-> RGB conversion? REC709 or REC601? If both, then how is the choice determined?

  Thanks for your help.

  It depends on the blending mode. Composition normal can be RGB or YUV, but more artistic blending modes are a RGB. YUV conversion will be from Rec709 or Rec601 according to the encoding with which the tag source data for this layer.

• Lumetri give me some little weird problem on high contrast clips.

  I got a project PP e-mail file editor.  When he made and export the video, it was happening on its end.  When I visited and export it gives me this weird effect.  I don't know how to solve this problem.  Ive tried to remove effects and re-colouring, but I get the same question, but it's not getting on its end with the same settings.

  This is what it looks like:

  

  

  But then, in this clip, which also has a great ray of light, weather: everything has the same settings

  

  I have a guess if you checked Lumetri scopes on clips of "bad", you would find that you have some highlights above 99 on the left scale in the RGB Parade scope. And most likely some less than 1 or 2 also. You can also have problems with excessive saturation. Sometimes when PrPro "sees" media it seems to push on the top & bottom down, not all that common, but can happen.

  The way it works currently, the 'Standard' tab is not allowed to move whatever it is above 99 or less than 1 so we can't 'break' our images. However, the means... is not going to bring anything he sees as "outside" the limits of the background either. It does not seem to work properly with saturation off limits.

  However, OTHER tabs may all work with these data perfectly. As in...

  

  (1) bring down top-99 highlights strong with the slider next to the color wheel luminance made...

  2) raise up to any below 0 with the slider of luminance next to shadow color wheel...

  (3) make any excessive saturation using hue Sat "curve" which is a forward-looking tool on the wheel. Reduction of set, click the line, and drag. For special colours, use the colour keys to choose a 'normal' shade (R, G, B, y, m, c) or click on each side of your shade of problem to create an outline, and then click & drag in-between these points bring this article a new hue.

  Another method for a control made highlights/shadows, of course, would be the curves tab... Take the ends of the line either bring more away-out highlights blacks down or deeper upwards.

  Everything by doing one of the shows preceding the Vectorscope's Parade & YUV RGB... When you have something outside 1-99 on the parade brought back inside and also hide anything outside the bounding on the vectorscope box inside, your picture looks good again?

  Neil

• How can I run without losing a part of the image?

  I used a scanner to scan in a bunch old photos flat.  The photos are not perfectly straight - I thought I could turn and recrop using LR.

  Here's the problem: I have a bunch of crooked pictures on a white background.  If I try to rotate the photo, it will eventually crop part of the photo.  (Does make sense - you've all seen that when you tried to rotate a photo).

  But I need to find a way to tell LR to add in extra white background as needed instead of cutting into my actual photo.

  I can do this in PS by creating a great white background, turning the original photo and then to cropping.  It's annoying when you have 100 + images.  But is there a way to do that in LR?

  On the Correction of the lens, manual tab of the panel is a slider on the scale.  Set it to a value less than 100.

• Elitepad 1000 2: 1000 2 camera Elitepad issues andter upgrade probs with office...

  Initially brought, unstable - so doesn't a restored Windows 10 - rear camera system works but very dark - things like camera app control applications and allowing access to the camera settings / proc amp seem do not connect to the camera.  Not happy - but I deleted the recovery partition - so not having the camera fixed, would like to know if I can buy / download a full recovery of 8.1 Win DVD / ISO... Windows 8.1 worked fine...

  This should help:

  http://support.HP.com/us-en/document/bph07143

  also

  http://support.HP.com/us-en/document/c00707939

  This might be useful: http://support.hp.com/us-en/document/c03430151

• The video graphics card upgrade

  I have a HPE-112y.  My son wants to go graphical treatment to NVIDIA GTX 680 graphics card.   I know I have to improve the supply, but the current system will be able to handle it.

  Here are the specifications of your desktop HP Pavilion Elite HPE-112y. The 680 GTX graphics card should fit and work in your system, but you want to measure the space along the PCIe x 16 slot to make sure. You must also ensure that the PCIe x 1 adjacent to the beach 16 x slot is empty. The cards GTX 680 I watched, require a power minimum system nominal 550 watts or greater and an amp 38 note on the 12 volt rail. Corsair CX600 is highly recommended and known to adapt to most HP consumer computer cases.

  Please send Bravo

• Very grainy Youcam problem after "setting fix advanced dark screen" in dv7

  Hello.

  I have the YouCam came with my computer, which is a HP Pavilion dv7 Notebook PC with Windows 7 Home Premium, Service Pack 1.  Since I got it, I installed all the updates.

  I was JUST able to solve the problem of black screen that many people seem to have by changing my setting with the following fix:

  Go to "improve the current video image"

  Click on "Advanced".

  The value of 'Backlight comp' to '2' (which is max) in the "Video Proc Amp" tab

  Go to the tab "Camera control" and set "Exposure" to "-2" (which is max)

  Click Ok.  Do not hit 'apply '. It will cancel all these settings)<---Most frustrating="" thing="">

  So now, I have a picture.

  The problem that I have now, it is the image I horribly gal AND has a grainy grid pattern on everything.  Other videos of the correction, that didn't happen.

  Sample photo:

  

  Video example (YouTube):

  http://www.YouTube.com/watch?v=aNqMxaiIam0&feature=youtu.be

  BEFORE that, I was able to capture video/images that were fairly normal; No big, but normal HD.

  I want the HD-ness, I should be out a HD product I bought... :/

  HALP!  Thank you in advanced for your magnificence in advance.

  PS: I tried to 'default' everything, too. I had to do the fix to make it work well. I don't know what kind of parameters I maybe changed or not when I was trying to understand the original problem, or if there is a setting I have unintentionally has no 'by default' because I forgot...

  Hello Spennati,

  Try the steps in this link http://goo.gl/Zl7Jx

  Please let me know if it helps.

• 400 pro G1 MT: pinout header MS-7860 map mother PB/LED (P5)

  Anyone know where I can get the pinout for the 10 pins header called "PB/del" labeled P5 (connector) on the MS-7860 Ver 1.2. (400 pro G1 MT)? I saw manuals which avoid the connector. Note that the PIN "missing or key" is exactly in the middle (PIN #6).

  I've seen many diagrams with the key or missing pins at one end. This isn't my Board of Directors. This is where the cable with the power switch (not to be confused with power) meets the motherboard.

  I replace a failed motherboard (three months out of warranty new with no physical signs of damage) with an ASRock H97M Pro4. I have had each other perfectly cable connector. The only one I'll have to "convert" is P5 (on the very outside edge of the angle of the SATA port). Thank you for your help.

  Just pinned it out (the hard way). For anyone else who might have this motherboard. Here are the correct pinout:

  (1) HDD LED + (3) HDD-LED (5) PWR switch (7) PWR switch (9) n/c

  (2) power LED + (4) Power LED - (6) vacuum (8) jump (10) jump

  \________/

  n/c    (has a hole with No wire)

  vacuum  (a coveredhole)  The key, so you can't plug it wrongly.

  Caveat!  Pins 8 and 10 are a rider or 'short death' (perhaps a 'case' of bypassed self-protection?)

  I recommend that cut you the rider that it will not likely be necessary on your generic replacement motherboard!

  Colors (may vary)

  Drive HARD + LED (1) is (Green) power LED + (2) = (Red) disc HARD - LED (3) is (white)

  Power LED-(4) = switch (5,7) (Black) power = (the two white) jumper to cut (8,10) = (Black)

  The two "Power LED" (white) are interchangeable but LED HDD - (white) is not so be careful here

  and the jumper to cut (deleted) is Black and should not be confused with the Power LED-

  I apologize if I gave too much info here, but it might be useful for a novice in computer wiring...

• Desktop screen problem

  Why the my screen is all white, with the exception of a 2 "wide strip of top down on the left side, only on the screen? Thing I do is the way that it supposed to be. It's just like that on the desktop. And when the pc is turned on, it appears the desktop image full screen just before its completely initialized. And when stopping down, it shows the image full screen of the office, just before it stops.

  I tried a lot of things in case of problem, but it is not an option, which suggests the problem. And I've tried hundreds of different pictures of funds from many different sources, including my own photos. It started some time ago and I was try and ask but nothing helped. The great white is never going away on the desktop.

  Help, please! Anyone?

  Hi Marilynne Allenstein,

  1. did you of recent changes on the computer?

  2 are you able to access all the items on the desktop except the white screen?

  3. do you have security software installed on the computer?

  First unplug and plug back in the computer monitor, check if that helps.

  Method 1

  I suggest that you change desktop theme and check if it helps.

  Make Windows XP as you wish

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/personalize-Windows-XP

  Method 2

  If the previous step fails, then check if the problem persists in the safe mode and after return with details.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  If the steps above don't then connect another monitor to the computer and check if it works.

• The Canada Radio slot?

  I recently bought a Sansa Fuze and have had 2 concerns:

  (1) I downloaded the firmware update, but the SlotRadio icon does not come upward

  (2) I still have to find a store that sells slotradio cards (or even the slotradio readers) here in the Canada.

  Help!?

  jpain wrote:

  I recently bought a Sansa Fuze and have had 2 concerns:

  (1) I downloaded the firmware update, but the SlotRadio icon does not come upward

  (2) I still have to find a store that sells slotradio cards (or even the slotradio readers) here in the Canada.

  Help!?

  You will not see the SlotRadio icon unless you have one of the cards inserted. Insofar as buy the Canada, unfortunately many electronic products are harder to find (and more expensive when you do) up here in the great white North. Sorry for that

• OfficeJet Pro 8600 - Print margins are off, slow and noisy printing

  I have problems printing my printer HP Officejet Pro 8600. When I am able to print the process is extremely slow and the printer made a lot of noise before and during printing. In addition, the margins are off compared to those on the document itself. The left margin is so great that it is cut a part of the document on the right side. I tried to unplug and restart the device and it is set back to the factory, but the questions remain. I printed a test page and it looks good, but speed, noise and margins continue to be a problem. How can I fix these problems?

  Thank you!

  What you mentioned, it seems that something is happening with the material. Here are two links to try to fix it, please choose the one that corresponds to the computer you have

  Slow printing in Windows: hardware issues

  Slow printing in Mac OS X 10.4 and later versions: printer problems