Elitepad 1000 2: 1000 2 camera Elitepad issues andter upgrade probs with office...
Initially brought, unstable - so doesn't a restored Windows 10 - rear camera system works but very dark - things like camera app control applications and allowing access to the camera settings / proc amp seem do not connect to the camera. Not happy - but I deleted the recovery partition - so not having the camera fixed, would like to know if I can buy / download a full recovery of 8.1 Win DVD / ISO... Windows 8.1 worked fine...
This should help:
http://support.HP.com/us-en/document/bph07143
also
http://support.HP.com/us-en/document/c00707939
This might be useful: http://support.hp.com/us-en/document/c03430151
Tags: HP Tablets
Similar Questions
-
the camera shutter sound cannot be silent with the mute button on my phone i 6 s
the camera shutter sound cannot be silent with the mute button on my phone i 6 s
Depending on where you purchased your phone, this is not possible, because of legislation in these countries that regulate this feature.
In all other cases, try to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again. You won't lose data, but it can cure some problems after installing new software or applications.
In the case where this does not work, restore the phone:
-
How to get you to your rear camera works again after upgrading 8.3 on an iPhone 5?
How to get you to your rear camera works again after upgrading 8.3 on an iPhone 5?
Is 8.3 typo?
After which update exactly?
-
PrecisionHDMC camera could not be upgraded
Hello.
We have replacement camera failed on SX20 with a 'new' using the RMA procedure. It comes with FW FINAL S01777 - 2.0 (released in TC6.1).
Codec has already last TC7.3.4 FW installed and after connecting the camera, she starts to upgrade (30-40) and cycling permanently in that State. Do we not have to downgrade the first to TC6.1 (TC7.1) to switch to the last camera FW?
Thank you.
Marcel
The camera must be able to upgrade, see nothing in the release notes which mentions that you have to upgrade in a way. However, you might want to try and get off at TC6.3 when the next version of the firmware came out and then move on to software TC7. If for some reason you can't get the camera to upgrade at all, suggests you reach out to the TAC engineer you transformed your RMA and it can help or submit a second RMA.
-
6 of Lightroom cannot read my Canon 5 d Mark III photo files, the import message I received: the following files were not imported because they could not be read. I use the same camera that I used Lightroom 5 with the same cards Compact flash. The files are: DK5A0243. CR2
Lightroom 6 trying to copy pictures to a different directory than what is Lightroom 5. That's why you have the problem.
You can change the directory where you are teaching LR 6 to place photos, or change the permissions on this directory to read & write.
-
HP 1000-1b10au: graphics driver issues
Hello
I using HP 1000 - 1b10au model running windows 7 (32-bit) AMD and I downloaded and install all the necessary drivers required for this laptop from the HP Web site.
The problem is that, after DRIVER GRAPHIC, windows experience index does not update the graphic details even though the catalyst AMD driver is installed. For this reason, the brightness display option is absent and the brightness key does not work at all.
Please help me, if anyone knows the solution for this. I've attached a snapshot of all the necessary details.
THANK YOU GUYS.
Hello:
I have posted below the above chipset driver graphic driver AMD from AMD (not HP).
-
Hello
Hp laptop model: Hp 1000-1320 c.
In my laptop installed windows 7 64 bit OS.
I tried to find the drivers but could not achieve, please help me.
Concerning
Rajesh
Hello:
Your model is not supported by HP for W7.
Try the W7 x 64 drivers and software from the HP 2000 t - 2A 00 on your model. Do not use the BIOS or firmware files.
This model almost the same hardware did yours.
-
Series Deskjet 1000 - J110 printer but drivers are not compatible with Mac OX 10.4.11
I bought a Deskjet 1000 Printer series - J110 printer but drivers are not compatible with Mac OX 10.4.11, which is the mode of systemon my macbook. What can I do to solve the problem?
I'm sorry, but you won't be able to use it with Mac OS 10.4, this model is supported by Mac OS 10.5.8 and above.
Most of the latest models sold today is supported by 10.5 and above.
-
Intel® PRO/1000 PT Dual Port Server adapt (PCI Express) with ESX/ESXi 4?
Hello
I try to work to the next with VMWare ESXi 4 card worsk.
The card is the
Intel® PRO/1000 PT Dual Port Server adapt (PCI Express)
Who uses the: Intel® Gigabit controller 82571 GB
However, in the VMWare HCL, he mentions the Intel 82571EB Gigabit Ethernet controller
These are two elements compatibile, if VMware ESXi will work with this card?
I am hoping that someone out there has tried it can give me an idea.
Thank you
Ward.
Virtually all Intel devices are supported...
-
ProBook 4520 s camera issues after upgrade from Windows 7 to Windows 10
ProBook 4520 s has problem with webcam after upgrade to Windows 10.
Skype and other software do not have access to the camera.
Drivers installed after the upgrade - universal HP (Realtek driver) looks OK in Device Manager.
FIX:
-Deletion of Arcsoft Camera sharing (installed on Windows 7 at first) in the Device Manager.
-Download and install PC Camera Driver from Realtek Realtek support on site area:
NB needs to restart.
Skype now see camera and works OK.
Solved.
-
Lumenera Infinity 2 camera Communication issues
Hello National Community Instruments,
I am trying to get a 2 Lumenera Infinity camera to work with LabVIEW.
I downloaded the http://www.lumenera.com/support/downloads/microscopy-downloads.php sheetI also downloaded NI Vision with its pilots IMAQdx and IMAQ according to needs.
However, whenever I try to load an example, or even to add a block of program it starts asking for NILuAPI.dll
This file does not exist in the plug in.
I was wondering if anyone had experienced this or if it was just a case of a file with the incorrect path.Solution?
It was a little confusing that request since they refer to National Instruments when it comes to LabVIEW.
However, talking to Lumenera was the right path.
For my particular problem, the NILuAPI.dll file, on what he asked was missing in the standard download.
You must request this Lumenera and also be sure to ask for the 32-bit or the 64-bit version, according to which matches your version.
Then move the folder of Lumenara (LuCam) of inst.lib in LabVIEW 2010 (by default it's made)and move ot the inst.lib in 2011 (or whichever is yours).
(this is for the 64-bit version only)
Finally and above all to move the NILuAPI file in the Windows System32 folder which is located under C:Then try opening an example of the LuCam folder.
Everything should load successfully. -
Camera Raw 5.5 does not install? And button camera calibration issue.
I just built a new computer with 7 PRO and installed all my software. When it comes time to install raw 5.5 it goes in half way through and told me to cut the deck. As far as I know the bridge window and the program are disabled and not running. I have same unpined it out of the taskbar.
In CS4 when opening a Raw file and I spend my botton of camera calibration there are only two options that arise, 3.3 and 4.4 Arc. Where are all the other options to? They come with the 5.5 update? Thanks Keig
It is not connected to the taskbar icon. Look in the Task Manager under the process and runs, kill him.
Also uncheck the option to load at startup in the preferences.
-
rear camera iPhone 5s does not not with 9.2.1
my camera back iPhone 5s suddenly stopped working, it shows a black screen, same flash of light does not work. front camera works properly
Restart your iPhone, iPad or iPod touch - Apple Support
If this does not resolve the issue - bring the phone to an Apple or authorized repair center
-
Performance issues after upgrade to view 5 on Windows 7
I'm having a lot of performance problems after upgraded to vSphere 5 and 5 view connecting using PCoIP. Interaction with the virtual machine are slower with either double or single monitor. I tried all solutions different workaround proposed on the site of Teradici. If someone has bugs or suggestions about how do to clear up things please answer.
Add the following line in the vm config file.
mks.poll.headlessRates = 1000 100 2
It should solve your PCoIP lag problems, let me know what your results are.
-
Backup issues after upgrade to iOS10
Dear users of Apple,
I updated my iphone 6 more yesterday with iOS 10. Phone works quite well. But I have my phone backup problems. I usually back up my phone with my iTunes Macbook (Via cable and sometimes on wifi). But after the update to iOS 10 it seems that I can't back up my phone more. I don't know the real cause of this problem.
1. I am not able to save my iPhone via wifi data in iTunes. (Previously it was not the case).
2. I tried to back up my phone using the cable also. Also, I pressed "Trust" this computer, but I get this error message. Please see below.
Also, I allowed my computer by disconnecting iTunes and logging back there. And yet I have the same issues.
"iTunes could not connect to the iPhone because an invalid response was received from the device."
Does anyone know what this answer is invalid can be?
Do I have to change the settings in my phone or iTunes?
Help please!
Thank you very much
Deven
Did install you the latest iTunes? iOS 10 requires iTunes 12.5.1.
Maybe you are looking for
-
How long my Apple Watch will take to ship?
I ordered a grey space 42 MM series 2, and he has just moved from process to prepare for shipping items. I was charged for the watch. When can I expect to see preparation for shipment are turning to embedded? Thank you!
-
From the R Console, I do a request for assistance and the following IP address is attempted: 127.0.0.1:10263/doc/HTML/index.html I am unable to connect to this site to document GUTS. Suggestions? Thank you Carl
-
Re: Satellite C660 - code 19 CD/DVD drive error
My Satellite C660 CD/DVD ROM drive does not read the CD. When checking my device manager, there is an identified problem:"Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (
-
"EditPathsInFilesDialog" is missing in TS4.1
The EditPathsInFiles menu item is no longer available in TS4.1 But it's still in the API! So here's a solution to add this point: Simply go to Tools => Customize Add a new element of sequence as on the screenshot below. This will execute the attached
-
I need to learn how to configure the files in the mail section. In addition, if you have an idea on how to import folders of old high office that would help enormously. Thank you. Tom