Green line on the right side

Similar Questions

• Why does my HP laserjet 1022 produced a black line on the right side of the page?

  Why does my HP laserjet 1022 produced a black line on the right side of the page? This occurs by using Word 2003, Photoshop, Acrobat etc. I don't get this with my Epson printer. My printer drivers are all to date. OS = Windows 7.

  Hello dqmcg

  Have you checked programs and OS - seemed to be OK, so did a new install of the printer. I have seems to now work OK - IE the files previously printed with lines now don't (only verified although some).

  I think that I was naïve in beliving Windows when he says that the printer and the driver were OK, and when I did a re-driver installation, Windows just used the file I already had. Also the "print test page" printer properties was always OK. Must have been very slight damage to the driver who showed up only with certain types of files of a few (different) programs.

  Thank you very much for getting my brain to work and begin to think logically.

• How can I get rid of the dotted line on the right side of the frame enclosing

  Since I upgraded to CS5, I seem to have a broken dotted line along the right side of the frame enclosing the png logo that was created for my business.  It did not exist previously. I went back to my original back to the logo and it broke the line is in all versions now.

  When I use the work a single table of edge/dotted line is left to the far right, where it would have been the right vertical line of the bounding box. You can see in the image below on the right.  Its a slight white line but when printed on a banner for its stark white.  The line falls just above the last "A" in Alberta.

  

  I use Illustrator and Photoshop basics and but have trouble when I'm in the problems of this kind.

  Can someone help me understand why its there and how get rid of?

  I'd appreciate any help!

  
  Thank you.

  Probably not without more information.

  The logo is placed above the background color or is the part of the logo background color.

  Are they on the same layer is the effect applied to the logo. Say you that it is png, which program was author in and why is png?

  Tell us more.

• LaserJet pro 400 color: Blue lines on the right side of the page when printing in color

  When printing in color I get this blue line that occurs on the right side of the page. It is darkest near the edge and shoot low towards the printed part of the document. It is a vertical line that follows the entire length of the page. I printed a report of quality and it is always present. In my view, this indicates that it is a hardware issue, rather than software. Is there some rolls or the part that needs to be cleaned? Can you provide a link to the instructions?

  Thank you!

  Replace the cyan toner cartridge.

• Monitor of 22xi HP Pavilion showing the Green tint on the right side

  I've had my Pavilion 22xi for about 8 months now and everything has been fine until a few days ago when a green tint has appeared on the right side of the screen. A pink ghosting of my web browser can also be seen in the upper right when, on a dark background. I use the monitor as a second monitor connected to a macbook via a connector mini displayport HDMI /. The problem occurs on mac and windows.

  I changed the HDMI cables, checked the connections, reset the monitor to factory settings, read through the HP troubleshooting tips and try the monitor with another computer, but the same problem persists.

  I think there is an error with a monitor, but I wanted to ask if there was anything that I'm missing or a solution before contacting HP support.

  Hi Kojiri, sorry to hear that you are having problems with your screen display. One thing that I know that I had problems with was that I have a subwoofer near the monitor and it caused the screen to change the color. I also noticed a slight change in color when I had my base of wireless phone, sitting on the desk next to the screen. Now if this isn't the case for you, I suggest that you please click on the link I provided and try the document that solves the problems of different screen.

  http://support.HP.com/us-en/document/bph05236

  If you are still having problems with the screen, please let me know and I'll be happy to help you further.

  Thanks for your time.

• How do I remove a single white line on the right side of the printed page

  Appears on all printed pages, regardless of the source.  Kaleidoscope, cleaning, installation of new print heads and the linefeed calibration solves the problem.  The printer is an Officejet Pro 8500 a Premium.  Thank you.  I'd hate to throw a 18 month old printer in the trash.

  When you say that the issue is on the right side you mean the right side (and along the way on paper) when printing in portriat mode?  If so the problem may be due to a spot on the MICR band.  It is a fragile and delicate, tape printed with hundreds of lines per inch that the printer uses to know where the print head on the entire page.  Cleaning the MICR band, as described in this post can help solve the problem.  Be sure to heed the warnings.

• Black lines on the right side of the printed document Hp 8600 N911g

  I have problems with my HP 8600N911g.  I have several vertical black lines on the printed page of right hand margin.  This only happens when I copy or scan. Printing from my pc is fine.  I did all the cleaning, cutting for over an hour and reset to factory default.  NOTHING WORKS.  Help, please.  I love the printer hp but tire of their problems, which are few, but when they occur, they are doozies.

  I am on Windows 7

  Hi peggymay.

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Sorry to hear that you are having problems with black lines on your scans or copies.  I had this problem myself on my 8600 very clean and I was able to get it to be resolved. The question arises in fact from two locations and with a little luck, we can get this problem solved for you. First thing to look at is under the hood of the scanner. Lift the cover on the left of the large scanner glass and scanner, you will see a small strip of glass. Take a glass clear cleaner and a lint cloth and clean the small glass placed as well as the large glass. On the underside of the lid, you will see a white plastic strip. Please clean it as well. IF you have already done these steps please proceed to the next step.

  The printer power cable must be connected to a wall outlet and NOT a power strip/Bar. HP printers have built in surge protector and if you have it plugged into a strip/Bar, the printer will NOT get all the power needed for the proper functioning and it will cause problems with scans or copies, and it might even generate false error messages on the printer screen.

  Please try these steps and if they work, fantastic. But if they are not, please do not hesitate to write me again.

  I thank very you much for your time.  Always happy to help.

• Photosmart C4450 scanner prints with a black line on the right side

  The need to issue to resolve, the RPG scanner with a completely black spot on one side of the page.  When used as a printer everything is OK

  Thank you

  Seth

  * Have you tried to clean the surface of the glass on the printer to ensure there are no particles causing this black line?

  * So, have you tried a hard reset of the printer?  Unplug the unit while on, disconnect the other end of the power cord of the direct plug, wait 30 seconds and plug in the.

  Try to plug in his own taken dedicated as well, because the electrical noise from other products can cause these lines in the analyses.  Also, check the steps in the document is located here.

  Let me know how it goes.

• 6500 a black line on the right side when I copy

  I have printer hp 6500 has only when I copy I have a black line on the full length of right on the paper even when I copy a blank sheet

  Hi danpk,

  I understand that you are having problems when you perform a copy.  I'll take a look at the document below.

  Copy quality

  Let me know how it goes.

• How to hide the mess of buttons that occupy two lines on the right side of the Navigation bar? Customize does not affect the

  I just got an update 8.0.1 and now I have a set of not less than 20 icons at the top right of the Navigation bar.

  It's left arrow, right arrow, X, reload, home, Basel, clock, star, unjknown, unknown, window with + in it, scissors, two documents, Clipboard, four directions,-, +, two circular arrows, RSS icon, another arrow to the left.

  Some of them would be useful, but not two rows of them; However customize doesn't let me drag out - they move as a whole block and just snap back on the release.

  In addition, when I mouse over this area they Flash quickly on and outside.

  Can you advise how to choose which of these elements, I want to see: they take a lot of space and I only need about 3 - 4 of them.

  Thank you!

  Start Firefox in SafeMode (https://support.mozilla.com/en-US/kb/Safe+Mode) and the option "Reset tools and controls bars. This will return you to the stock icon set that you can then customize to your taste

• I have a white vertical line down the right side of my screen

  Hi all

  Can someone help please.
  I noticed a day or two there is a white vertical line appear on my screen.  Have you checked the updates etc, but nothing seems to have fixed.
  Can someone please help :-)

  Hi Vicky,

  I apologize for the late response.

  If you still experience the problem, I suggest you to contact the manufacturer of the monitor that has the problem and check if it is a hardware problem in the monitor.

  This is because, in Safe Mode, the graphics drivers do not work on your computer. Because you have encountered the problem in Mode safe as well, it indicates that the problem is not caused by a problem in the software that controls the attributes of your display unit. So, at this point, it would be better if we check for hardware issues in the monitor. We do not have enough expertise to help you to diagnose hardware problems, but the hardware manufacturer specialize in this.

  I hope that this information will take a step more toward the resolution of the issue. If you have additional questions about Windows, do not respond. We are happy to be of assistance.

• Color LaserJet CP1525nw: 1 1/2 black lines on the right side and another black spot on the side right laserjet cp1525nw color

  I downloaded the software and latest drivers. It has the latest firmware. I contracted the toner and blown with compressed air. Look in the back for the dust from toner on the sleeve of teflon to fuser. Unplugged, restarted, of course my book has been for laser printers. Ran across several cleaning cycles, recalibrated color, put a piece of paper and toner open door when he was printing. Released A black to see if I could see and toner on blue cylinder. None of the things I've tried have solved the problem. Toner is about 3/4 down. It print fine with this new series of cartridges for quite a while.  I went from my warrarnty.

  .

  The amount of toner from the printer say that there is only an estimate. Your default seems to me that the black toner cartridge is bad. First thing I would do is to replace the black toner cartridge as it should solve your problem.

• The right side F4140 printing line

  When I print something on my printer HP Deskjet F4140 on my Mac computer (running 10.9.4) I sort of dotted line on the right side of the page.  See photo.

  A few times the points are longer, sometimes (as in this picture) they are shorter.  But the stupid line is still there.

  Any ideas?

  Thank you very much!!!

  Melinda

  

  Welcome to the Melinda forums

  I have seen your post and on the lines that you see on your print images out of your Deskjet F4140. I seem to think that there may be a driver conflict and we suggest the following steps:

  1. Mac OS x: how to reset the printing system (This will remove all printers)
  2. Repair disk permissions
  3. Restart the computer
  4. Add new printer (do not use the AirPrint driver)

  I hope that helps!

  Enjoy the rest of your day

• vertical line appears on the right side of the monitor

  When I hit the menu button, that nothing comes up that I can't make changes in this way. I know it must be something simple, but if I can't go on the menu screen to show how else can I set the monitor so that the line on the right side goes?

  Hello ufonda,

  When you press the menu button you say lock OSD?

  If Yes
  Press and hold the button of menu during about 10 seconds unlock the menu button

  If no
  Unplug the monitor from the wall and the computer completely. Then reconnect it back and try again the menu button.

• OfficeJet 8600 Doc bac - line down the right margin when copy or scan

  I have officejet pro 8600 premium.

  When I print or scan from the document feeder, there is a line down the right side of the document printed or digitized, about an inch from the edge of the page.

  The line does not appear when I use the flat bed.

  He won't let a line from the original - just on the copy or scan when using the document feeder.

  It happens when I scan my computer or copy to the screen of the printer when using the document feeder.

  I just noticed the problem today.   It was working fine yesterday

  Thank you

  This means that there is a place (dirt or tinted), on the ADF scanner glass. Try to clean the glass of the scanner ADF with fluffy. The ADF scanner glass is on the left side, under the ADF.