vertical line appears on the right side of the monitor

Similar Questions

• WINDOWS XP STARTS TO LOAD. STOPS LOADING AND VERTICAL LINES APPEAR ON THE MONITOR. LAST DAYS ONLY. CAN NOT USE COMPUTER.

  WHEN STARTING MESSAGE BED WINDOWS HAS STOPPED UNEXPECTEDLY. GIVES A LIST OF POSSIBLE CAUSES AND IF APPLICATION WINDOWS TO START NORMALLY. THEN IT STARTS AND LINES APPEAR ON THE SCREEN. HELP PLEASE... ALSO WORKS WITH SP2

  WHEN STARTING MESSAGE BED WINDOWS HAS STOPPED UNEXPECTEDLY. GIVES A LIST OF POSSIBLE CAUSES AND IF APPLICATION WINDOWS TO START NORMALLY. THEN IT STARTS AND LINES APPEAR ON THE SCREEN. HELP PLEASE... ALSO WORKS WITH SP2

  =================================
  Looks like you may have a type of material
  failure, but the following article may be worth a visit:

  (307852) how to start your computer using the
  the last known good Configuration feature
  Windows XP
  http://support.Microsoft.com/kb/307852/en-us

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Satellite P30 - three vertical lines appeared on the screen

  I have a problem with the display on my p30 110 three vertical lines appeared on the screen, the pc has been scanned with three different antivirus programs and seems to be clean any suggestions would be helpful

  Hello

  These problems usually occur due to a malfunction of the equipment.
  But have you tried to update the graphics driver. If this isn't the case, so I recommend to do.
  The update may solve some problems.

  However, if vertical lines persists then you should ask Toshiba service for assistance.
  He must check the laptop.

• My normal short clip in the timeline panel. When I hit the break, vertical lines appear. The lines are also exported. Why?

  My normal short clip in the timeline panel. When I hit the break, vertical lines appear. The lines are also exported. Why?

  Found an answer online. Here it is:

  I also want to mention that if you disable your GPU acceleration and use the software only mode the question should stop. It seems to affect only when the GPU acceleration is turned on.

  Go to file > project settings > General and only software switch.

• Blue vertical line appear on the screen of the series M Satellite

  I had a blue vertical line appear on my screen its about inch thick and is at - it start, can someone tell me if I can get rid of him? Thank you.

  Hello

  If this blue line is present from the first second after turning on the laptop that I presume it's because of the faulty graphics card. To be sure try to connect an external display to see the same thing will happen. If Yes, it is the evidence that this line occurs due to faulty hardware.

• The gray vertical lines appear on the bottom screen shots

  Hello

  Vertucal gray lines appear on the few photos that I took to be painted. They appear not in the Photos, but only when they are displayed as background pictures. It happens on every image but some a few, I can't work on any model! Any help would be appreciated!

  Photo for example is attached.

  See you soon

  

  You see the same problem, if you export the photo (file > export > export original) and then set the photo as the desktop to a folder in the Finder and not directly from your photo library?

  Preview shows also the photo with band objects?

  If you can see objects only when display as an image of the desktop, try the same from another user account - sign in the guest user account and set the image of the Office here.

  If the guest user account shows the same objects, restart your Mac in safe mode.  What is going on?

  See this link: Mac OS x: Safe Mode boot

• White vertical line appeared on the screen.

  A vertical white line appeared about 3 inches from the left hand side on my Dell Studio 1749.  It started about 1 mm wide, but increases in width and is now about 4 mm wide.  There is no problem on an external monitor when connected.

  Is this likely to be a problem with the Panel or a chip problem?

  Thank you.

  Yes, probably would have worked, but I just replaced the screen in the end.

  Thank you

  Ian

• Re: Satellite A500 - 15 M - blue vertical line appears on the LCD screen

  Hi - I turned on my laptop the other day (I have an A 500 - 15M) and I noticed a very thin dotted vertical blue line running through the centre-right of the screen of my computer, all the way up and down.

  I tried things like change the desktop theme, screen settings, updated to the intel drivers but nothing is done, it won't go away. Does anyone have a solution or a similar problem? I bought an extended warranty of 3 years so could still call Toshiba and ask them about it, but wanted to see if there was a quick fix here of someone.

  I tried to restore to a previous restore point, but nothing helped.

  Help please, because it is very annoying!

  Thank you very much!

  Hi bilal1982,

  Hmm, it seems to be a hardware malfunction with your laptop

  I mean that if you tried to update the driver display and restored Windows to an earlier point, but without success, it seems that the graphics card or LCD screen is defective.
  You can connect an external monitor to check if it of the graphics card or internal LCD screen.

  But in both cases you should contact a provider authorized in your country. Guys can fix your laptop under warranty, so it of free for you.

  Here is a list of aspic, where you can search:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• HP envy smart-touch j 15: display vertical line appeared in the Middle

  How can I solve vertical line has appeared in the middle and color of windows seems also dimmed

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that you are having problems with your laptop display. We will surely help you with this problem

  1. Please check if the display screen / laptop showing lines even in BIOS or not

  Note: Turn on the computer laptop and typing on the F10 key to access the BIOS

  2. Please tilt the laptop display slowly to the back and the front, check and check

  If the lines are visible to all the corners of the screen

  3 Please connect an external monitor to your laptop and check if the lines appear even on the

  external monitor

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on Thumbs Up white on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL84

  I'm not an employee of HP

• Yellow vertical line appears on Satellite Pro

  My machine is 18 months old. Last week a thin yellow vertical line appears on the monitor approximately one third of the left side. Tonight a thin purple line appeared about 1 cm to the right of the yellow.

  Any ideas what causes this and how can I get rid of him?

  Hello

  You you connected the laptop external monitor to check if the lines appear also on an external display? If this is not the case, check it.
  If the lines appear on the second screen, so I suspect it s a malfunction of the motherboard (graphics card).

  In this case, you do not have many ways to solve. For the most part a replacement is necessary.
  According to your message, sure the laptop is 18 months, so usually the guarantee should be valid if you have registered on the page of Toshiba notebook.
  The standard warranty covers the laptop for 12 months and after registration, you have a 24 months warranty coverage.

• Satellite M65-S9063 - vertical white lines appearing at the bottom of the screen!

  Hi all - ideas...

  Model M65-S9063 about 3 weeks ago a white vertical line appeared to the bottom of the screen, it's around a mil thick.

  Then yesterday a second is appeared, a little thinner this time. They are still there even after a reboot! It does not appear that any video is displayed as they are always white. I was wondering maybe graphics card? Or maybe the LCD itself?

  Has anyone seen this before?

  Thank you very much

  Hello!

  You simply determine the reason for this question. Connect an external monitor to the laptop and see what happens.
  If you see the same error on the external display, it s a map or graphic display driver problem. If you don t have this problem on the external screen, you must go to an authorized service provider to swap the internal display.

  If you use a driver display Toshiba not you must remove it and test it with Toshiba drivers.

  I hope I could help a bit.

  Good bye

• Vertical and/or horizontal lines appear in the FSX cockpit at any time during the game. System hangs. Happens all the time.

  I am extremely frustrated by this problem.

  I have FSX and acceleration installed on my system. My system config is: 9450 Intel clocked at 2.67 Ghz on an EVGA 780i motherboard. 1100 watts of power. A graphics card nVidia 8800 GTX, 4 GB of RAM running Windows 7 64 bit. All the drivers, hardware and software are updated. All programs run fine EXCEPT FSX, which is my main game I use.

  V Sync is set to "Power On". FSX loading is correct. When I'm in the cockpit there is a 'sparkling effect' on panels of light from the windows, etc. At any time during the flight, all of a sudden, vertical lines appear, get worse then everything crashes or I have to manually shut down computer. I adjusted and adjusted re all resolutions, uninstalled, reinstalled the program, changed and changed everything and nothing seems to fix the problem. This also occur frequently with add on such as Captain Sim 757, etc.. Captain Sim told me that it was a "matter of Microsoft."

  Help, please!

  Thank you.

  Paul W. Norman

  Hi pauln49,
   
  have a. you been able to play this game earlier on your computer with no problems?
  b. changes made to your computer recently?
  c. do you receive any error messages?

  Check the last update for the game and install it.
  http://www.fsinsider.com

  Also, try the steps outlined in the article.
  http://support.Microsoft.com/kb/303032

  Hope this information is useful.
   
  Umesh P - Microsoft Support

• My phone has a gray spot and he goes but he always comes back and my phone is bulging commandeLorsque I try to push to vertical lines appear so I can't push

  My phone has a gray spot and he goes but he always comes back and my phone is bulging commandeLorsque I try to push to vertical lines appear so I can't push

  Is that an iPhone 5? If so, you may have a battery of swelling which pushes the screen and that may have caused damage to the screen.

• a pink vertical line appeared on my screen

  A thin pink vertical line appeared on my screen. How can I get rid of him. I tried the obvious bases.

  You probably have a line of dead or stuck pixels on your LCD screen. There are programs that carry out the display of this bike through various display models and some people recommend massaging where the pixel stuck watch manually.

  Video exercise programs show some real promise, but I'm not sure a lot of the other supposed fixed. Personally, I think that many of these patches are as a cure for sneezing that they are no longer for the laugh of the person who provided the remedy in the interest of the person in arrears by sneezing. In addition, if the pixel has become unstuck, you can always ask success.

  Use Bing or Google to find dead pixel and you will get a multitude of solutions thrown your way. Exercise video display may be worth trying.

• Strange green line appears on the bottom of the frame of sequences (NOT the ONLINE PREVIEW RAM)

  Hello!

  I've recently upgraded to AE CS5, after long use of CS3.  I came across a problem that I hope there, someone can help me with.  For one of my elements of film a green line (one pixel high) appears at the bottom of the frame.  The green line appears in the layer panel, so I'm not there with plug-ins display - only it's purest form.  When I open the file in QT on my Mac, the green line at the bottom of the image is not there.  This has not met with the CS3 version, and I'm lost for a solution.  I did some googling and found some users AVID talks about a similar problem and was related to the fields.  So I went to 'Interpret the film' and then removed the fields with 'Lower' first and the green line goes.  The problem with this work is about the film looks so poor.  This is a digital image file, and I wouldn't remove fields because there were not at first.

  I have attached a few screenshots of the images in QT and AE CS5 for you all to see the question.

  Has anyone encountered this problem?  Is this a known problem CS5?  Is it related to OS x 10.6.5?

  Any help, advice or advice is greatly appreciated!

  Thank you!

  

  

  There is nothing to fix, and it's not a bug. For MPEG of any sort, all dimensions must be multiples of 2. It is inherent to the work of compression. You can not have a high 219 px film and not have it be cropped or enlarged pixel, with all the negative sides. I assume that the file is in fact already 220px high, the only difference being that CS3 can interpret correctly flag Quicktime display area, considering that this happens not in CS5. Which could be considered to be a "bug", but because Apple does not provide a 64-bit Quicktime and Adobe had to reverse engineer things, who do you blame? Yet once, it is not really something wrong here. In fact, the same file read on another computer or in a setting different software player can expose the same question, even when working in CS3. So the only real 'fix' is to properly encode the file 218px or 220px high. And the fields do not belong in desktop images. Apart from EI the irregular line will also be visible no matter how AE only displays a field both internally. You will need to handle this correctly, even though you may not want to.

  Mylenium