Greetings from Facebook for all users of Toshiba

Similar Questions

• Toshiba drivers after installing for all users available

  Hello

  does anyone know if the drivers of Toshiba (value added Package, utilities, HWSetup) are available for all users of Windows 7 and not only for the user who installed the drivers. I configured both users on the laptop and the second user has no record of program with the Toshiba Utilities.

  John

  >... and the second user has no record of program with the Toshiba Utilities.
  Is it so important? I mean when the laptop is configured correctly, both users can use all the tools of Toshiba pre-installed and utilities.

  The two users to have the same status (Administrator / standard user)?

• We look for details user for all users directly from Active Directory in a webcenter portal application?

  We look for details user for all users directly from Active Directory in a webcenter portal application?

  Hi again.

  Is not just WebCetnerDS in WebLogic... If it's a CustomPortal you had created a CustomPortalDS.

  You need to do a DB connection in your y JDeveloper Portal App than a link to the WebCenterDS schema.

  Deployment and testing of your WebCenter Portal: Application Framework - 11g Release 1 (11.1.1.7.0)

  Follow the links provided by Vinay on the WLST.

  Kind regards.

• How to get an extension of the dictionary for all users in a Citrix environment?

  Hi all

  Under title, I'm looking for a way to get out a dictionary of Firefox (specifically the English (British) of https://addons.mozilla.org/en-US/firefox/language-tools/) to all users in a Citrix environment. Comprehensive silent installation is absolutely best. Because following a recent installation of Firefox users report that this spell check is not working, what appears as a result there is no dictionary to check the spelling on the facility.

  It's in a corporate environment, running 6.5 XenApp hosted workstations to multi-server Windows 2008 R2 Enterprise x 64, the installed Firefox info below as collected by the add-on troubleshooting pulled from the browser in the test environment with the same characteristics.

  So far, I have tried what follows from this link: http://kb.mozillazine.org/Installing_extensions

  "A whole installation will install an extension in the directory of the application rather than in a profile so it will be available to all users. To perform a whole installation, you must not activate as within your Mozilla application installation file. Instead, download and save this record and make sure you close the application completely.

  Then follow one of the following options:

     Copy the .xpi file into the <installation directory>\extensions folder. When you start your Mozilla application again, it displays an installation dialog, asking "The following items were found in your Extensions folder. Do you want to install them?" "
  

  Although it seems that the < installation directory > \extensions folder no longer exists at the given location. Find a path of the < installation directory > \browser\extensions but seems it does not behave as said here that I have not received all of the guests. I hope that this method is still applicable in some way and I am just not aware of how this is currently supposed to be handled, but not sure if it is a dictionary rather than a typical add-on will have no effect on the installation overall how can be reached.

  Have also tried to http://forums.anandtech.com/showthread.php?t=2268437 , which seems a pretty basic option, but this would have not only to a lot of work to do on a per user basis, but there are also restrictions in place to prevent access to the records of users AppData.

  Finally I was looking https://support.mozilla.org/en-US/questions/740545 to push this point across: the les parametres parameters configuration, then use the method above to enforce this on the user end, but did not find anything me.

  Any help/advice/shots of elbow in the right direction would be greatly appreciated.

  It might be easier to extract the files of two dictionary (.dic and .aff) of archive XPI (ZIP) and place the two files in the folder of Firefox profile for the dictionaries available for all users.

• Adjustment of the farm for all users

  My apologies if I missed this answered somewhere, but I couldn't find it anyway. I have a thin client, running vWorkspace AppPortal 8.0. Users to connect individually as opposed to a shared connection. Is it possible for me to load the configuration settings of the App portal for all users?  If I have each log and load the config file.  So basically, I try to have the configuration file to load automatically for all users.  Is this possible?  Thanks in advance.

  Hey Kevin,

  Just to give due to what Greg said, there is an article here

  In addition, there is more in detail the process from this page in the Administrator's guide

  http://documents.software.Dell.com/DOC262967

  I hope this helps!

  Thanks, Sam

• How to block Facebook for specific users by IP in NSA 4600 Sonicwall

  Hello

  I want to block facebook and youtube for some users in network using the IP of the user's computer or a MAC and allow other remaining users access facebook normally in Dell Sonicwall NSA 4600.

  Kindly guide me how it is possible in the firewall settings. Thank you

  Osama Aftab.

  You must configure the App control rules advance for block & FB access to specific users.

  Following article will give you heads upward.

  It is said in this article during the configurations block: activate & user/group of users Include: all THE (IE block FB for all users). You can use groups to exclude the user to authorize access to few IPs/users.

  

• How to activate permanently on "Show processes for all users" in the Task Manager

  I have a facility with windows 7 installed twice.  will receive run the Task Manager in the initial installation of windows the "show processes from all users" is checked by default and visible.

  However, in the second installation on a spare drive will receive run that task manager this option is converted (boxed) and must be clicked but the machine doesn't remember this setting.

  How can I get windows 7 to continuously show me processes for all users?

  Thank you footoomsh

  Hello

  Are you logged on as ADMINISTRATOR?

  The Task Manager - create a shortcut high
  http://www.SevenForums.com/tutorials/10499-Task-Manager-create-elevated-shortcut.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How can I block the SMTP for all users but mail server

  I can't understand (1) how can I refuse port 25 for all users on the network and allow for Exchange server SMTP, also I have MS Exchange, which manages the web and smtp and in my setup below you can see that there static mapping to publick ip with http/smtp only, then (2) how can we separate the traffic entering a publc IP will outside servers inside ex : (MSexchange public ip address is x.x.x.207-> http = 172.16.2.13, 172.16.2.14 = smtp)

  Thank you

  ___________________________________________________

  6.3 (1) version PIX

  interface ethernet0 car

  Auto interface ethernet1

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  names of

  name 172.16.4.10 pdc

  name 172.168.4.11 llc

  name 172.16.4.11 ftp

  object-group service E-mail tcp

  port-object eq www

  EQ smtp port object

  object-group service tcp - udp terminal

  3389 3389 port-object range

  object-group service mw tcp - udp

  Beach of port-object 367 367

  radmin tcp service object-group

  RemoteAdmin description

  4899 4899 object-port Beach

  object-group service mw1 tcp

  Beach of port-object 367 367

  access-list 101 tcp refuse any any eq smtp

  access-list 101 permit tcp any host object-group x.x.x.251 terminal

  access-list 101 permit tcp any host x.x.x.214 object-group radmin

  access-list 101 permit tcp any email host x.x.x.207 object-group

  access-list 101 permit tcp any host x.x.x.212 object-group mw1

  access-list 101 permit tcp any host x.x.x.211 eq ftp

  sheep ip access-list allow any 192.168.101.0 255.255.255.240

  IP address outside x.x.x.194 255.255.255.192

  IP address inside 172.16.2.1 255.255.0.0

  IP verify reverse path to the outside interface

  IP verify reverse path inside interface

  alarm action IP verification of information

  IP audit attack alarm drop action

  IP local pool mypool 192.168.101.1 - 192.168.101.20

  don't allow no history of pdm

  ARP timeout 14400

  Global interface 10 (external)

  NAT (inside) 0 access-list sheep

  NAT (inside) 10 0.0.0.0 0.0.0.0 0 0

  static (inside, outside) x.x.x.212 172.16.4.12 netmask 255.255.255.255 0 0

  static (inside, outside) x.x.x.251 172.16.4.51 netmask 255.255.255.255 0 0

  public static x.x.x.214 (Interior, exterior) pdc netmask 255.255.255.255 0 0

  public static x.x.x.211 (Interior, exterior) ftp netmask 255.255.255.255 0 0

  "REM # 172.16.2.13's Exchange with Outlook Web servers #

  static (inside, outside) x.x.x.207 172.16.2.13 netmask 255.255.255.255 0 0

  Access-group 101 in external interface

  Route outside 0.0.0.0 0.0.0.0 x.x.x.193 1

  enable floodguard

  Sysopt connection permit-pptp

  VPDN PPTP-VPDN-group accept dialin pptp

  VPDN group PPTP-VPDN-GROUP ppp authentication pap

  VPDN group PPTP-VPDN-GROUP ppp authentication chap

  VPDN group PPTP-VPDN-GROUP ppp mschap authentication

  VPDN group PPTP-VPDN-GROUP ppp encryption mppe 40

  VPDN group VPDN GROUP-PPTP client configuration address local mypool

  VPDN group VPDN GROUP-PPTP client configuration dns 172.16.2.6 172.16.4.6

  client PPTP-VPDN-GROUP VPDN group configuration wins nymc_pdc

  VPDN group VPDN GROUP-PPTP pptp echo 60

  VPDN group VPDN GROUP-PPTP client for local authentication

  VPDN username * password *.

  VPDN allow outside

  This is your problem:

  Access-group 101 in external interface

  You link this access list to your external interface. This means that the rules are applied to incoming traffic IN your network. The implicit IP any any rule is because you have not bound to an access list on your inside interface.

  To prevent users from going out, you will need this:

  access list permit tcp host exchange_IP OUTPUT no matter what eq smtp

  access list tcp OUTPUT deny any any eq smtp

  Access-group interface inside OUT

  See how this access list is linked to the inside interface... it will affect traffic leaving your network. Note: Once you apply this inside allow any interface it will remove the implicit.

• Error "have sufficient privileges to complete this installation for all users of the machine. "log on as an administrator and try again the installation" when you try to install iTunes

  Original title:

  I just installed windows7, I had to uninstall itunes in order to complete the instalation of windows7. everything went well until I tried to reinstall itunes.

  During this process, I get the message "you don't have sufficient privileges to complete this installation for all users of the machine. log on as an administrator and try this installation again. ». but I am logged on as administrator.

  Hello

  To resolve this problem, use the following methods. After completing the steps in each method, check to see if the issue is resolved before you go to the next method. If the problem is resolved by any method, you do not have to use other methods.

  Method 1:

  Right click on the installer for iTunes and click Run as administrator.

  Method 2:

  Disable user account control settings and check.

  Enable or disable the User Account Control

  Note: User Account Control (UAC) can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that require administrator-level permissions. Disabling it can make your compromised computer. Please make sure that enable you UAC, once you have completed troubleshooting.

  Method 3:

  Allow the default Administrator and try to install it in this user account.

  a.Click on Start, click principally made programs, Accessories, right-click on command prompt and select run as administrator.

  b.Type in the following command and press ENTER.

  NET user administrator / active: yes

  c.Log disable the current user account and log in to the user called Administrator account.

  d.Install iTunes in this default Administrator account.

  e.Once of that installation is complete, the default administrator is disconnected.

  f. log in to your user account.

  g.Disable the default Administrator account. Follow these steps.

  i.Click on Start, click principally made programs, Accessories, right-click on command prompt and select run as administrator.

  II. type the following command and press ENTER.

  NET user administrator / active: No.

• Easy way to change the label of the field for all user interfaces?

  How a client would change a label field for all user interfaces that use this field or attribute, which is not really a translation?

  What I have found seems to be that we would need to edit Resource Bundles and it will be much easier in version 8:

  1. the information on Resource Bundles in https://blogs.oracle.com/fadevrel/entry/translating_your_customizations section has this key passage:

  It is a standard open sector (OASIS) XML file with the extension .xliff format and store translated values for strings used by the ADF running. The general process is that these values are exported from the MDS, modified manually and then imported into the new repository. This must be done by an administrator, either via Enterprise Manager or WLST orders according to the screenshot below. It is detailed on the merger application Extensibility Guide.

  2. this blog announcement also says that it will be easier in version 8:

  Currently planned for version 8 is what we call the UI (UI) text editor. This tool will allow the mounting of all the text on the pages and merge request forms. This will provide a search based on an expression or a Word, say 'Worker' and will allow it to be adjusted, tell 'Employee', which then updates all the resource bundles that contain.

  3. I found video, How to customize field labels , but it seems that it is a label of the user interface at the same time...

  WIlliam, Yes, and we have a documentation and/or videos on this feature when R8 is available.

• How to set preferences of creation for all users - machine laboratory at the University?

  I'll put up for our University editing room which has a CC license "per machine". It is a PC facility. This machine will be used by a class of students who will register with their own credentials. I need to set preferences for the first (video output, default working space planning etc. discs) so that it is the same for all users connecting from us want a consistent configuration for educational purposes and not want to help every student to configure so that it displays correctly on monitors. Is there a way to save this default setting for each user?

  The most important of them is the preferences - reading to set up the second monitor.

  Post edited by: Bruce Cooke

  Just copy the files preference and workspace of your user folder.

  Mylenium

• How to change the value of the Application for all users?

  Hi, I work on Apex 3.2.1.00.12 which is installed on a database of Oracle 10 g Enterprise Edition Release 10.1.0.5.0
  
  I'll explain my problem... At the beginning of the application, the user choose a year, each year can have 3 status and based on the State to restrict or grant access to certain tabs, pages and options. I put the status of the year selected in an Application element and then I just use an authorization scheme to check if the user can access pages or options.
  
  The problem is that if the administrator changes the status of the current year (for example, 1-2), users who are currently in the application will have access to the options of the State 1, instead of the State 2 options. is there a way to change the value of this element for all users?
  
  Thank you.

  Force a disconnection of all users? You can't really affect the values of the sessions other than your own via a browser, and from the point of application is part of a single session...

  You could re-read the value of point of application of its source whenever you load a page or tab game...

  Thank you

  Tony Miller
  Ruckersville, WILL

• The Vmtools icon hide taskbar for all users

  Hello

  I was wondering how to remove the icon from the taskbar to Vmtools for all users.  When I connect I have disable however if another user logs on to the icon returns to this user.  It seems to be an individual user setting and not a global setting... There should be the option to put it on a global scale... (perhaps a thought for the future revision)

  Thank you

  This key should help:

  Windows Registry Editor Version 5.00

  \VMware of HKEY_LOCAL_MACHINE\SOFTWARE\VMware tools, Inc.

  "ShowTray" = DWORD: 00000000

• How to change the password for all users in the database

  Hi buddies!
  
  Could someone tell me how to change the password for all users in the database? I want to set the same password for all users.
  
  Thank you.
  
  Nith
  
  Published by: user645399 on March 1, 2011 14:23

  Write the file spooling
  as

  Make sure that all profiles has password_verify_function with a NULL value

  then

  Select 'edit user' | username: ' identified by ;' from dba_users;

  you will get the output... you just run.

• query to display objects for all users in the database

  Hi all
  
  I want to make a query that Lee display. result for all users in a database.
  
  Total number of #tableau #Indexes #Packages #Procedure #Functions #Sequences #Views # other username
  
  ABC 11 5 1 1 1
  
  1 1 1 0

  Something like this would work in 10g and before:

  SELECT     OWNER
  ,     SUM(CNT) AS "TOTAL"
  ,     MAX(DECODE(OBJECT_TYPE,'TABLE',CNT,0)) AS "#TABLE"
  ,     MAX(DECODE(OBJECT_TYPE,'INDEX',CNT,0)) AS "#INDEX"
  ,     MAX(DECODE(OBJECT_TYPE,'PACKAGE',CNT,0)) AS "#PACKAGE"
  ,     MAX(DECODE(OBJECT_TYPE,'PROCEDURE',CNT,0)) AS "#PROCEDURE"
  ,     MAX(DECODE(OBJECT_TYPE,'FUNCTION',CNT,0)) AS "#FUNCTION"
  ,     MAX(DECODE(OBJECT_TYPE,'SEQUENCE',CNT,0)) AS "#SEQUENCE"
  ,     MAX(DECODE(OBJECT_TYPE,'VIEW',CNT,0)) AS "#VIEW"
  ,     MAX(CASE WHEN OBJECT_TYPE NOT IN ('TABLE','PACKAGE','INDEX','PROCEDURE','FUNCTION','SEQUENCE','VIEW') THEN CNT ELSE 0 END) AS "#OTHER"
  FROM
  (
       SELECT     OWNER
       ,     OBJECT_TYPE
       ,     COUNT(*)     AS CNT
       FROM     ALL_OBJECTS
       GROUP BY OWNER
       ,     OBJECT_TYPE
  )
  GROUP BY OWNER
  ORDER BY OWNER;
  

  11 g, you can use the PIVOT operator to do the same.

  You can change this by changing the statements of DECODING of CASE statements if you can use the LIKE operator to catch all objects such as VIEWS and VIEWS MATERIALISEES.

  For example:

  MAX(CASE WHEN OBJECT_TYPE LIKE '%VIEW%' THEN CNT ELSE 0 END
  

  HTH!