Greetings [issue pre-purchase on the purchase and activation of a program]

Similar Questions

• I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

  I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

  Try to run this program in your usual account, then copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• Again - the EULA allows to keep Windows XP after the installation and activation of a retail upgrade to Windows 7

  The EULA allows to keep Windows XP after installation and activation of a retail upgrade to Windows 7?
  I understand that the EULA (EULA) prohibits the USE of the operating system upgraded - must also be removed from the system?

  I intend to upgrade a pre-installed Windows Media Center 2006 on a Gateway computer to a level of detail to Windows 7 Pro 64 - bit.  I am adding a new hard drive, as this case nears end of life... and plan to install the operating system upgraded to the new HD - because I have XP 32 bit to Win7-64 bit... and a "custom" installation is necessary, anyway.

  This will result in an operating system XP on the old hard drive and the new OS Win7 Pro 64 - bit on the new drive.  There have been suggestions that the answer to this question is simply to remove the "old" operating system, after activating the 'new' Windows 7.  However - I see that any installation (or REINSTALLATION) of the operating system upgraded to Win 7 requires the previous XP to be "present on the computer.

  QUESTION: as long as I don't 'USE' the BONE replaced/implemented to date, I am in compliance with the EULA?  Alternatively, do I install "over" this Windows Media Player OS - on the old, due to lack of hard drive?

  The Media Center EULA States: «...» "15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After you upgrade, you can no longer use the software upgrade of. ... ', but is silent (as far as I can find by reading the EULA on the question of if software upgrade HAVE to be 'destroyed'.)

  (See: http://download.microsoft.com/Documents/UseTerms/Windows%207_Professional_English_7bb89e9f-20ea-4555-892f-394539ec1090.pdf "")

  Thanks for your review (a reference to the appropriate Microsoft documentation would be nice too)
  John

  You said above, «...» "You will be able to upgrade to Windows XP, it is a qualification license... »

  And I assume you are talking about my software Windows XP Media Center Edition (currently installed), as being a "qualification licence".

  That is right.

  Are we in agreement that a copy preinstalled OEM of Windows XP Media Center Edition IS extendable with a 'detail' update the license for Windows 7?

  His qualification, but you can't make a real room upgrade, you can do a custom installation. See the previous post on how to migrate from Windows XP to Windows 7. An upgrade maintains the personal files, settings and installed applications.

  I understand the ban on using the OEM OS software OR the upgrade replacement software on one computer other than the one on which it was originally installed by the OEM.

  I also understand that I cannot use the "improved" XP Media Center software, once the upgrade of Windows 7 has occurred.

  The rest to determine if it NEEDS to be deleted or replaced... you have no guidance on this issue?

  Well, when you perform a custom installation, in essence, it is deleted or replaced. Then, it is part of the upgrade license. It's like it becomes a mind is more tangible, but always there as a base to which the upgrade license may exist on your system.
  ------------------------------------------------------------------------------------------------
  On the original thread, Stuart W J replied 10 September 2012-
  "....

  "New - the EULA allows you keep Windows XP after the installation and activation of a retail upgrade to Windows 7?

  "..... No it does not preserve / using XP after the upgrade... »
  -----------------------------------------------------------------------------------------------
  Although I can't find the ban against the "continued" it any where in the EULA.

  Thanks again,
  John

• All my shortcuts on the desktop and start menu - all programs are showing up with blank windows pages icon.

  Original title: broken shortcut

  ALL my shortcuts on the desktop and start menu - all programs are showing up with blank windows pages icon and the name of the file and .lnk I uninstalled something and it happened that I tried system recovery and everything else that I uninstalled the States are back but this how can I solve this?

  Hello

  1. what changes have been made to your computer before the problem?

  Follow these steps and check if they help.

  Step 1:

  I would say you rebuild the icon cache and check if the problem persists.

  a. press the keyboard Windows logo key combination + R to bring up the Run dialog box.
  b. type cmd and press ENTER to open the command prompt window.
  c. in the command prompt window, type the following commands pressing ENTER after each line:
  Taskkill /f /im explorer.exe
  attrib-h "%userprofile%\Local Settings\Application Data\IconCache.db.
  del "%userprofile%\Local Settings\Application Data\IconCache.db.
  Explorer.exe

  d. this restart Windows Explorer and rebuild the cache icons as needed.

  Step 2:

  Test the issue in a new user account.

• During the installation and activation of google chrome, I lost my taskbar

  Original title: Google Chrome

  during the installation and activation of google chrome, I lost my taskbar. How can I reinstall my taskbar?

  Hi Frank,.

  1. do you receive any error messages?

  2. have you restarted the computer once installed google chrome?

  3. not this problem occurs when you run a specific program or out of order?

  This problem can occur for the following reasons:

  • Auto-hide the taskbar has been selected for the taskbar and Start Menu Properties.
  • Your user account settings are corrupt.

  Method 1: Make sure that the hide option automatically is not selected for the taskbar

  To determine if the hide option automatically is not enabled for the taskbar and Start Menu properties, follow these steps:

  a. press CTRL + ESC.

  b. If the Start menu is displayed, click on the Start menu and then click Properties.

  c. click on the task bar , clear the Auto-hide the taskbar option and then click OK.

  If the problem persists, you can proceed to method 2.

  2 method: Recycle Explorer.exe

  Try to recycle Explorer.exe by opening the Task Manager (you can use Ctrl + Shift + Esc), selecting explorer.exe in the list and choosing end process.

  Now go to the file menu, choose new task and type in Explorer in the Open box. Press on enter and explore should restart itself.

  Check whether the taskbar is visible now.

  Hope this information helps. Provide more information so that we can help you.

• Service issues cell phone iPhone, update errors and activation problems.

  So I just returned from a stay in Germany yesterday. I got home and when I got my iPhone 5 s out, my iPhone would not connect to my carrier that is EE. It shows that «in search...» ", in the upper left corner, where it should display my carrier. I have enabled updates of the carrier, but did not find anything. I also removed and re-inserted my SIM card, but when I took it out it still showed the message "Search"... ». However, I found that it was and to update the iOS, 9.3.3. Immediately I thought this would be a solution to my problem except when I tried to install this update, I had "a software update cannot be installed at this time. Try again later"message. I then deleted apps, so I had 4 GB of data in case I didn't have enough space to install it. It did not work. Then I deleted the update and re-uploaded. Still nothing. I was frustrated now then searched the Internet for fixes, but for me, those difficult sites never really work, and of course, they did not. In the end, I decided to back up my data and content and do a reset. Now I begin to set up my iPhone and get to the part where I choose a Wifi hotspot, so I chose the connection of my house which is strong and should be able to maintain a connection to the whole upward. But after I click Next, it says 'iPhone activation', but then he says: "your iPhone could not be activated because activation sever is temporarily unavailable. Try again in a few minutes. "I tried again 10 minutes later and it still does not work. All I want is a solution, because I am now left with a useless phone and I am due to go to Spain in 6 days and will not be able to ring or text anyone. Help, please!

  A difficult here. Ultimately, this looks like a problem of free Wi - Fi connection. Try restarting your router. Also coincidentally, you might have a Wi - Fi chip or the faulty antenna.

  Here's a tip for the user on the problems of Wi - Fi. Many of them does not apply in your situation but worth the drive just in case.

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• How to make a backup of the health and activity data?

  Hello

  I would like to do a fresh install on my iPhone version 6s 9.3 to 9.3.2. My question is how can I save only the data of health and activity?

  I couldn't find any option in iTunes or iCloud backup specific applications. Please notify.

  -Salah

  Hi Salah

  It is not currently possible to only back up data of health and activity through Apple backup and restore process.

  Health and activity - as well as other sensitive (like password) information - data are included in encrypted iPhone backups.

  It is possible to exclude these data from a backup (by a backup encrypted United Nationsvia iTunes), but it is not possible to only backup and restore sensitive data.

• 'open with' appears when you try to open or to download the elements and fails to open programs

  I think I had a viral attack about 4 months ago and since I experienced these problems:

  ' 1. when I try to open some programs, I get a message that the program is found, i.e. when I click on the ' help and support' the message icon is not found is displayed.  This happens also on othe rprograms.

  2. when I try to download the 'open with' appears, but I can't find the right program to open the file, i.e. trying to download Flash Player, I get the 'open with' box but I am unable to open the program.  Before that happened here for programs and downloads would be automatically opened.

  Hi mehempfield,

  Download and run the file below to fix the EXE file association broken on your operating system
  XP Fix EXE

  See you soon!

• I just new iPhone 7 & when I transfer, none of my music is available offline (purchased and apple's music program), trying to figure out how I can download it all at once, without having to enter each individual album and click the cloud

  Just got the new iPhone 7 & when I transfer iphone 6 iPhone 7, my music has arisen on the phone, but none of my music is available offline, try to understand how I can download all at once for use offline, without having to enter each individual album and click the cloud.  I have a lot of music on my phone, would take me forever to individually download each album one by one for offline use.

  I have both bought albums/songs itunes and also many of the monthly music apple package.  In any case for all it all at once?

  Hello

  You must use the same identifier apple

  Go down homepage itunes page where it says more about this music bought to display

  And download

  For music apple if its does not sign of apple ID then sign.

  See you soon

  Brian

• Windows 8 - purchase and Activation (U.S. / UK)

  Hello

  I have a laptop purchased in the UK. Can I buy Windows 8 Microsoft we and installation on laptop UK and activate from the United Kingdom.

  Thank you

  Hello

  Yes, you can buy Windows 8 of Microsoft WE install it on the laptop UK and turn it on.

  Reference: http://www.microsoftstore.com/store/msca/en_US/cat/categoryID.64516500?tduid=ade5f3341085d9ec70e023ea61b484d9

  http://Windows.Microsoft.com/en-CA/Windows-8/clean-install

  It will be useful. Back to us for any problem related to Windows. We will be happy to help you.

• Issue of base on the development and deployment on a remote application server

  Hello
  
  All new framework OA im. I wanted to know if a solution is possible for the following scenario.
  
  We have a production server applications at a remote site for which I do not have access. I have a test application server to another location for which I can visit her profile. Now, I want to add a feature to production server. Can I use the test server to create features and deploy it to the production server. If possible, I should make the packages according to the production server? And how to deploy to the production server. Or is it a must that I should be able to connect to production server thro' JDeveloper to work on it?
  
  
  
  Thank you
  Corinne

  Hello

  You don't need something production server to create pages of the OFA.
  Do everything pending test or development, and finally deploy the files on the production instance.

  Use the following link to find out how to deploy the OPS file.
  http://Prasanna-ADF.blogspot.com/2008/02/deploying-oafwk.html

  Prasanna-

• HP Pavilion Notebook - 15-p199: need help with the installation and activation of 10 Windows after completely uninstalling Windows

  Hello HP assistants.

  I need help for a specific problem. My laptop came with an installation of Windows 8.1. Then I upgraded to 10 Windows when it became available. After a while, I decided to uninstall Windows completely (to wipe the hard drive) and install a Linux operating system.

  Now, I decided that I want to use some software that is not available on Linux and if I want to reinstall Windows 10. My problem is that Windows has completely disappeared in a form any. So now, I need to download Windows 10 from an official source (which I think can be done fairly easily from the official source of Microsoft, although if there is a better, HP official medium to do this then please recommend it) and then I need to activate Windows some how.

  As has been made clear, I have the right to use Windows 8.1 and 10 but I would need to download Windows 10 and turn it on. Is there a way to do this? I'm literally stuck without solution.

  Thanks in advance.

  Hello

  As long as the previous installation of Windows 10 had activated Ok after upgrade from 8.1, you can simply perform a new installation as described in the guide on the following link.  Note: On the activation screen, select "I don't have a product key" - Windows will activate automatically once installation is complete.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Kind regards

  DP - K

• Can someone take me from the beginning and help to install programs?

  I have several programs to install and do not know how

  We don't know what you want to install.

  Reading material: -.

  http://support.Microsoft.com/kb/305548

  How to add components and programs to a Windows XP computer

  http://support.Microsoft.com/kb/307895

  How to change or remove a program in Windows XP

  How to install the software in Windows XP

  http://www.Dummies.com/how-to/content/how-to-install-software-in-Windows-XP.html

  No rudeness not intended, this is a book for beginners.

• from time to time I move the cursor and all short cuts programe it touches opens. I also had a shortcut appears on the desktop for & run it shows nothing under properties and that you run maleware bytes and it also sees nothing

  rogall12000'yahoo.co.uk

  Thank you very much for your promt response I will try a different mouse and see how it goes and let you know in the future

• Problem with the installation and activation of Autodesk Autocad 2011

  I'm having a problem with the Autodesk Autocad 2011 activation. After I download and install the software, there should I active and a window opens to activation. The problem is the window is empty and I tried closing and reopending the program. I tried to uninstall and reinstall the program several times and get the same result. I checked the site Autodesk solutions and tried what they suggested, but without success. Help, please.

  Thank you

  Matt

  Hello

  You can activate AutoCAD, through activation and the recording interface, you can activate your product 24 hours a day, seven days a week, through the Internet or by e-mail. Or the other option takes only a few steps to complete and requires your product serial number and registration information.

  http://images.Autodesk.com/ADSK/files/autocad_2011_faq_us.PDF

  Also try the suggestion in the given below link and check if this is useful to solve the problem.

  http://USA.Autodesk.com/ADSK/servlet/PS/DL/Item?siteID=123112&ID=10244471&LinkId=9240617

  http://USA.Autodesk.com/ADSK/servlet/PS/DL/Item?siteID=123112&ID=10243884&LinkId=9240617

  If this does not help, you must contact the support of AutoCAD to help you activate the product.

  http://USA.Autodesk.com/ADSK/servlet/PS/index?siteid=123112&ID=2714854&LinkId=9240617

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.