Windows Vista SP2 caused USB Driver Corruption

Similar Questions

• Works with Windows Vista SP2, constant freezing, jumped through all the hoops and now it seems to be corrupted files after that I ran the sfc.scannow.

  Computer stops responding especially if I have more than 1 page open. Cursor problems, Outlook 2007 running super slow and not very responsive, ran the repair for this tool. Ran Ccleaner, checking virus, Malware, Spybot, clean disk, defragmentation, do a startup repair, chkdsk, and then the tool of sfc.  32-bit Windows system, Dell Inspiron running Windows Vista SP2 with an AMD Athlon X 2 processor.

  2009-12-27 17:39:41, Info CSI 000000 d 1 [SR] cannot repair the military record [l:22 {11}] "c:\windows\system32\dllcache\icardie.dll" Microsoft-Windows-IE-Infocard, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2009-12-27 17:40, Info CSI 000000 d 3 [SR] cannot repair the military record [l:22 {11}] "c:\windows\system32\dllcache\icardie.dll" Microsoft-Windows-IE-Infocard, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  ' 2009-12-27 17:40, CSI Info 000000 d 4 [SR] this element is referenced by [l:216{108}]"Microsoft-Windows-InternetExplorer-8-RTM-Update~31bf3856ad364e35~x86~~8.0.6001.18702.Internet-Explorer-8-x86. '
  2009-12-27 17:40, Info CSI 000000 d 7 [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:22{11}]"icardie.dll '; source file in the store is also corrupted
  2009-12-27 17:56:34, Info CSI 00000196 [SR] cannot repair the military record [l:22 {11}] "c:\windows\system32\dllcache\icardie.dll" Microsoft-Windows-IE-Infocard, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2009-12-27 17:56:34, Info CSI 00000198 [SR] cannot repair the military record [l:22 {11}] "c:\windows\system32\dllcache\icardie.dll" Microsoft-Windows-IE-Infocard, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2009-12-27 17:56:34, Info CSI 00000199 [SR] this element is referenced by [l:216{108}]"Microsoft-Windows-InternetExplorer-8-RTM-Update~31bf3856ad364e35~x86~~8.0.6001.18702.Internet-Explorer-8-x86. '
  2009-12-27 17:56:34, CSI Info 0000019 c [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:22{11}]"icardie.dll '; source file in the store is also corrupted

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  ------------------------------------------------------------

  Part of the problem is probably SpyBot which can greatly affect the peformance IE and Vista/Windows 7.

  Start - type in the search box-> find Services at top - click right on - RUN AS ADMIN

  Double-click Service SBSD and change it to MANUAL and STOP

  Then run SpyBot and in settings uncheck TeaTimer - close and restart.

  Now you can run SpyBot as a scanner at the request.

  ------------------------------------------------------------

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  =================================

  If you still have performance problems:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Driver for hp g60-230us network controller windows vista sp2

  I let a friend borrow my computer and they put a windows 7 on my computer after I asked them not to do so. I tried to restore to windows vista sp2, but missed me 10 drivers Ive managed to find all but one, the network controller. I tried to find the properties on the Device Manager but it appears not all im using a straight ethernet cable now, but I would like to than my mobility and ability back wireless please help me telling me where I can find this driver

  Hello:

  Here is the link for the driver you need.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&swItem=ob-108905-1&prodNameId=5060882&swEnvOID=4052&swLang=13&taskId=135&mode=3

• Computer will not start after the installation of Windows Vista SP2

  
  After downloding and installing Windows Vista SP2 on ACER laptop for my daughter, I can no longer start the computer.  Initially registered startup C:\\Windows\System32\drivers\ecache.sys as corrupt file repair.  Change BIOS to boot first from the optical drive and the departure of computer with Vista DVD in the drive, I accepted the option repair.  No chance that the machine always fails to start and always displays the window "Statup repair."  Auto repair is always unsuccessful.  Repair suggestions will be appreciated.  Thank you.  Bob G.

  Support Microsoft still offers a FREE support for Vista SP2.  Go to: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1 where they will help you.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After application of update Windows Vista SP2, FSX will not start

  FSX is not started after that I applied Windows VISTA Sp2. When the process is considered to be a task manager, FSX.exe seems to CPU to make loops. Are there not the method to solve something?

  Hi BuyIntel,

  Thanks for posting on the Forum of answers.

  I suggest to backup your saved games and reinstall the program.
  Something in the Service Pack may have corrupted some aspects of FSX, this should solve it.

  I suggest also to visit your video card manufacturers website to download the latest drivers and re-installation of the unit.

  I hope this helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 0x8007045D when you try to install Windows Vista SP2

  Hello

  Currently I have Windows Vista SP1 and want to upgrade to service pack 2. When I try to do the update of Windows, I get "error (0x8007045d) Error_IO_DEVICE. I also tried to install it in safe mode, I get the same error message. After having traveled a bit on the internet, I found that it is probably because my HDD is damaged... so I run the chkdsk program...

  The chkdsk program stops at 16%... Step 4 of 5... When 85785 files off 300000something files are done... and it does nothing more. It keep running like this all night, it goes no further.

  Does anyone have any suggestions on what I need to do to successfully install Windows Vista SP2?

  Thanks for your help!

  OK, I started the computer with the Windows CD and I ran chkdsk /f at a command prompt.

  Chkdsk /f found errors it corrects.

  I ran Chkdsk/r... .he got stuck after scanning 85763 files... near the place, he would always get stuck (85785 files)... so I guess it's the same file that crashes chkdsk.

  The good news: I still have a functioning computer.

  The bad news is that I ran the SP2 from windows update in new safe mode and it didn't work... I'm still stuck with my problem.

  I have an extra hard drive... that I ordered from Dell for my girlfriend's computer, his computer died before she could use the player, but it is larger, then the drive of your computer and it is brand new... the only downside is that the player has been implemented for the computer of my girlfriend (pilots and other things) and does not work in my computer. I guess I'll try to format that drive to make it work in my computer... it should fix this and then bad SP2 remedial power very well.

  I guess I have no choice.

  I suggest to remove avg (uninstall) then try sfc/scannow then chkdsk /f several times. a few times, they need more going to make things more

  Microsoft security essentials is a better a v for not update couseing problems.

  You can allways put avg in the back.

  not having is not enouph to free space for temporary files can couse problems too.

• Windows Vista sp2 and Installer cannot install updates error 80070641 code

  original title; Windows Vista sp2 installer problem

  Hello.  I'm running vista 64 bit sp2 and I seem to have a registry error with windows install.  Whenever I try to install/uninstall a program, I get the error message

  "The application failed to start because msi.dll not found. Reinstalling the application may fix this problem. »
  Maybe related, but when I try to run any windows program (examples are programs office, expressions) I get the error message
  "the specified module is not found.
  Also, I can't do windows updates.  For the latter, I get:
  error code 80070641
  Any help is greatly appreciated.  Unfortunately I do not have the original installation disks for vista, or all the backup files.

  Hi Maxjh25,

  It seems to be that some of the files windows install is corrupt.

  I have some steps that may help you:

  Method 1: Make sure that the Windows Installer service is running.

  a. click Startand type services.msc , and then press enter.

  (b) in the services window, locate Windows Installer service in the services list.

  c. check that the status is started. If the condition column is empty, right-click Windows Installer, and then select start.

  d. If you get error trying to force start the Windows Installer service, try to change the Startup Type to Automatic (default is Manual), then

  e. restart the computer.

  f. If all goes although you should, after the analysis, see the following message "theWindows resource protection did not find any breach of integrity".

  g. once the scan is finished, close the command prompt window, restart the computer and check.

  For more information, see the link below:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

   

  Method 2:

  a. try to uninstall Windows install using the Windows Installer Cleanup utility:

  Description of the Windows Installer Cleanup utility

  http://support.Microsoft.com/kb/290301

  b. restart the computer.

  c. download and install the latest version of Windows Installer by downloading from the link given below:

  Windows install 4.5 Redistributable

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  d. try to install the program.

  Hope the helps of information. Please post back and we do know.

• Using Windows Vista SP2 (32 bit), failed to install IIS

  Using Windows Vista SP2 (32 bit), cannot install IIS.  Tried several of the resolutions found on the web to turn (uninstall .net 3.0) to uninstall WAS.  Still nothing works.  Look at the event log, it appears that the TrustedInstaller.exe is in a loop that indicates that Windows Servicing began a process of change state KBxxxxx package installed to installed.  I have this day to the next release and we found thousands of entries repeated over and over as it in the event Log.

  I would say the TrustedInstaller.exe has been hacked or corrupted, but daily MS patches are applied without error.   I also ran the SFC/scannow command without success.  I tried to restart, don't turn off unnecessary services, execution of installation in Mode safe... go!
  I'm surprised there isn't a utility which will ensure the components that need to exist in the version required for IIS, well... does not exist!
  Any ideas?  I need to get the IIS services are installed for the development of a website of ASP.NET ASAP!

  Using Windows Vista SP2 (32 bit), cannot install IIS.  Tried several of the resolutions found on the web to turn (uninstall .net 3.0) to uninstall WAS.  Still nothing works.  Look at the event log, it appears that the TrustedInstaller.exe is in a loop that indicates that Windows Servicing began a process of change state KBxxxxx package installed to installed.  I have this day to the next release and we found thousands of entries repeated over and over as it in the event Log.

  I would say the TrustedInstaller.exe has been hacked or corrupted, but daily MS patches are applied without error.   I also ran the SFC/scannow command without success.  I tried to restart, don't turn off unnecessary services, execution of installation in Mode safe... go!

  I'm surprised there isn't a utility which will ensure the components that need to exist in the version required for IIS, well... does not exist!

  Any ideas?  I need to get the IIS services are installed for the development of a website of ASP.NET ASAP!

  I have only a limited understanding of IIS and ASP.net.

  1. What are they? IIS 5, 6, 7.0?
  2. make sure that your version of Vista can support.
  Go to programs and features > column to the left, turn Windows has on or off > scrolling Internet Information Service > expand (+) sign and make sure if its level of compatibility under Web management tools. Home Premium can go as far as IIS6. > Make sure check marks are on the elements you need to install IIS.

  3. from what I understand, the version of Vista Ultimate and superior is required to install IIS 7.

  This is as far as I know.

  To install IIS 7, here is a tutorial:
  http://learn.IIS.NET/page.aspx/28/installing-IIS-7-on-Windows-Vista-and-Windows-7/

  Your question needed IT expertise. I suggest that transfer you to one of these support ASP.NET forums.
  Here's one of them: http://forums.asp.net/

• Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100

  original title: HELP! Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100

  My checksur.log said

  =================================

  Preparation of control system was updated.

  Binary version 6.0.6002.22441

  Version 9.0 package

  2011-06-29 15:32

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  (f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_4_for_KB948610~31bf3856ad364e35~x86~~6.0.6001.2123.mum line 1110: nam

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  Hello

  These should help to resolve the problem:

  How to fix Windows Vista error 800b0100 update
  http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/

  Error Code 800b0100 in Windows Update
  http://www.instantvista.com/800B0100.html

  Error message when you try to use Microsoft Update or Windows Update Web sites to install
  updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702
  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ==========================================================================

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  You select Download - SAVE? After download go where you put it and right click
  on and RUN as administrator.

  Download Service Pack 2 x 86 32 bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d & displaylang = in

  Download Service Pack 2 x 64 64-bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3 & displaylang = in

  Create a new ADMIN account with your password - same then REBOOT (do not logoff) and
  log on to the new account and try the download.

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791/

  Service Pack Center
  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  ================================================================

  If necessary, you can get free reports of incidents however generally above allows to solve this problem.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• "Not enough space" error windows install during the installation of Windows vista SP2 software

  Original title - cannot install Windows Installer 3.1 on Windows Vista Home Edition

  I use windows vista home with service pack 2 installed. I have a custom made software. Before installing this software, I need to install 4 i.e. cystal reports, dotnet, report viewer and Windows Installer 3. I was able to install the first 3, but the windows installer fails, it is said to be "saturated". I also tried MSI 4.5 but of no use. My software runs well on Windows XP. The interesting thing is that I return this software a year and I installed it on vista and it worked fine. Now I have re-installed windows vista on my computer and had updated. Now this problem. Could there be a reason why some update to windows vista, I installed now wasn't there last year that causes the problem. Can anyone help.

  Hi tbilal22

  
  Windows Installer 4.5 comes pre-installed with Windows Vista and Windows Vista SP1. Please refer to the article for more information-

  http://support.Microsoft.com/kb/942288

   

  It is possible that the old software, it is not compatible to be used with Windows Vista SP2. I suggest you try software installation by using the Windows Vista or XP on Windows Vists SP2 compatibility mode and check if you are able to solve the problem.

  Compatibility mode is used if a program written for an earlier version of Windows does not work properly. Then, you can use the program compatibility Wizard to change the compatibility of the program settings. To manually change the settings of a program, use the individual program's compatibility tab

  You can check the link for assistance on compatibility mode - mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

   

  I hope this helps.

• Logitech webcam C250 with windows vista sp2

  I have webcam C250 logitech that does not load the software bundled with it or the logitech website or the update driver, s the windows update try, s to load when I put the CD to load the software, I get an error 800f020B code. I have windows vista sp2.

  Hi Scott Choate.

  Have you an error when you try to install the software?

  See this link for more information about Update error 800F020B:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800f020b

  Click on the link below and run the Fixit diagnostic tool to fix the problem automatically.

  Hardware devices not detected or does not:
  http://support.Microsoft.com/GP/hardware_device_problems

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Skype 7.8.73.102 bug on Windows Vista SP2

  Hello world

  My OS is Windows Vista SP2.

  Each Windows Vista SP2 updates had been installed.

  I met again the same bug in Skype.

  I used to install Skype offline, and then start the first time Skype has failed

  as the attached picture.

  After you restart, Skype still doesn't work even if online.

  How could I solve the problem?

  Thank you very much.

  Best regards

  Steven.

  

  I updated to Skype to 7.10.73.101, and then, the question did not appear.

• Windows Vista SP2, is error (0 x 80070490)

  I bought this computer in 12/2007 and Windows Vista SP1 is already installed when I bought, but now the updates for Windows Vista SP2 and when I click on install request I accept the terms, but then I get a this: ERROR NO FOUND (0 x 80070490) and I got to help, but this error does not appear on the errors. What can I please I need help ASAP!

  friend of Bill w.,
  Go through this article , because it gives the steps to solve the problem you are experiencing.  Post back with the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Do not install Windows Vista SP2

  I tried all the suggestions on trying to get the Vista SP2 install, but still get the error 800F0900.  Now, my IE crashes, so really try to get everything back to day.  Help, please

  Free unlimited installation and compatibility support is available for Windows Vista SP2 questions until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Installation Windows Vista SP2 fails with 737D error code

  When you install Windows Vista SP2 via Windows Update program, I continually receive an 737D error Code.  This error code says "Windows cannot update services and important files while the system uses them.  Save any open files, and then restart the computer. »

  Has anyone encountered this problem and found a solution?

  Thank you

  Joe Kunkel
  

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft