Grids in forms
Support team,
I'm still learning CSP and did not have the joy of any training yet, but I have a question about the right way to do forms of grid components.
Currently, I have a form to trigger a change to a physical server. The server information is a normal shape.
In addition, I would like to be able to enter data for multiple network cards and disks.
My solution was to create three separate service elements, server, DFU, and disk.
Then I created three separate dictionaries of those specifying that DFU, and the disk must be represented by grid.
Then, I created three distinct forms with DFU again and drive show as a grid.
Finally, I created a service that includes three forms.
I think that this is not the right way to do it because within this plan, I can only generate an element of service for normal form, the grid forms are not listed and so I have to adjust my adapter to send everything through CPO in order to get to that data.
Can someone tell me if this is the right way to do it?
--
Ryan
The method I used to pass the gates of plan service delivery is to use a ServiceLink agent configured to use the methods of CUD NSAPI service point (point of Service Update listener adapter). The key is to use a transformation to take the grid for the shape data and convert it to an API of NS request. Here is a document that I wrote explaining my agent "Service point Updater." It requires some conventions for the dictionary as having a "Status" attribute, but it can be adjusted according to your needs.
How to create a Service point for a grid task
9.3.2 + Cisco Cloud Portal
This document describes how to upgrade the service elements in a grid using a ServiceLink agent.
The dictionary SIBG (base grid point Service) should include only the properties that you want to update more an additional field called status.
Status for each line can have a value of New, Update, Delete, or void. Grid lines with a value of empty state (or any other value for that matter) will remain intact. The rules of form that call JavaScript are used to set the value of State appropriate for each line that users interact with the form. An example of this can be found in service of organization change in the accelerator MultiCloud to CIAC Starter Edition Kit.
The form containing the dictionary must have each of the editable server only (ie. not checked)-side disabled display property. Be aware that properties hidden by default this option is checked, then you must uncheck this option.
Service point Agent Updater
: Outgoing HTTP/WS adapter
WSDL: http://localhost:8089/IntegrationServer/webservices/wsdl/ServiceItemTaskService.wsdl
WSDL operation: ServiceItemTaskServiceHttpBinding.processMessage
Routing of URL: http://localhost:8089 / IntegrationServer/services/TaskService
Inbound adapter: adapter listener Service point
Outgoing settings
ServiceItemName - The name of the Service element (without 'If' prefix')
Dictionary - SIBG name (Service point grid function dictionary)
OUName - Name to org for the allocation of
UpdateType - new, Update, or Delete
To accommodate all types of three for a single grid, plan service delivery should call this agent three times (one for each type of update). A service that adds just or deletes lines just call the agent once for this type of update.
Outbound processing: The Transformation of services point Updater (for NSAPI)
Generates a NSAPI for create, update, or delete one or more service elements. Agent parameter "UpdateType" determines the operation: new, Update, Delete. Other settings on the agent contains if name and the name of the SIBG (grid according to point of Service) to use for updates. The SIBG must include a status column to match the type of update.
Processing of the request:
"" xmlns: xsl = "http://www.w3.org/1999/XSL/Transform"
"xmlns:ext ="http://externaltask.api.newscale.com"
>
http://schemas.xmlsoap.org/SOAP/envelope/"xmlns:ext ="http://externaltask.api.newscale.com">" "
$UpdateType])"/ >
0 ">
Tags: Cisco DataCenter
Similar Questions
-
What are the inner workings of the grid in forms?
Hi, I have some doubts, I want to know what are the inner workings of the grid in forms.
1. how forms followed the value change in the grid?
2. when we run the query that we will get the selected lines, then we changed some values in certain fields in the grid, how it follows the change in value? .how he knows the process is update or insert?
It is this that my concept, when we realized the request forms will be store values in the tables with rowid.i thought a lot more, but I can't any idea on it.any help me?
You just want to understand the functioning of the forms or you encounter some difficult techniques in certain areas? If you have a hearing problem, please describe, and we can try to help. If you try just to know how it all works, I would recommed referring to Forms Builder online help.
In help, search for information on GET_RECORD_PROPERTY. This part of the documentation provides a pretty good explanation as to what is happening and how to determine the current state of a folder.
In short, when you make a change to a field that represents a recording of the db, a SELECT for UPDATE is issued. This causes the recording to be blocked. Actually change value, we monitor internally. I won't go into the details on how we do here.
-
using the grid to form 10 g or 11 g
Hello
any body can help me to know how use the grid in form 10 or 11 g?Perhaps this Java Bean
François
-
How to mark the current line in the grid forms
How to mark the current line in the grid of forms in formsThere is no grid in use in forms
However, you were using the ORACLE spreadsheet in the OCX element before 10g in forms5.
You can use the property of coloring of the ORACLE worksheet if you use older forms.If you speak the text displayed in the instances multile means with more display records. then you can use the Visual Attirbute
and may affect the block attribute in current folder to the Visual attribute you make now. -
Hand-made backup of data and forms of data grids
Hi guys,.
Is it possible to make a backup of the data grids and forms of data manually (that is, without the use of LCM)? I work with a classic application, and I have files for all of the artifacts that were created (.alternance, .app, .rle, etc.).
Thank you!
See you soon!Easily through the U / I? Nope.
Plan a.
------
"Easier" option would be to use the hfmCopyApplication utility. (c:\hyperion\financialmanagement\server\HfmCopyApplication.exe). [NOTE: If you have 9 system, don't forget to download/get the system 11 version]The system 11 copy app gives you a healthy dose of flexibility in what you actually copy. For example, using the utility you can "copy" just forms/grids to another application. As with all versions of the utility, the application does not have to be in the same database as the source application. The utility works at the database level; Therefore, you don't need the application registered or same HFM running anywhere. All you need is available for utility data bases.
If it was me, I create a new database file, use the 'copy' schedules or forms in the source application. Can I use the database connection and place the files in your folder structure for the storage. If you need to restore, all you need to do is Mount the database and use the copy utility to push them to an application.
The major drawback here is that if you really want to look at forms / railings, you will need to register for this request and enter. A little annoying if you need to refer to the actual "source" forms and grids. If you simply need for a 'just in case' backup, it's probably a decent option.
Plan B
-----Write a script to extract all in the database tables. Excuse me, but I won't go into detail here because I have another post on this somewhere. Here are the important details.
Tables of importance:
_RPTS
_BINARYFILES Navigate records in RPT for each record with the appropriate file type value. (3 = shape, 5 = grid)
-For each matching record, take the EncodedLabel and get BinaryFiles lines where Label = EncodedLabel.
-The BINARYFILE field has the text of the grid/form. I think it is in Unicode, but I don't remember off the top of my head.
(NOTE: there may be several rows for an encodedlabel!) The field has a maximum length and if you have a grid or a big enough form, it will be more important and will require several lines. Remember to add together)NOTE: For bonus points, look at the ParentEncodedLabel. If you wrote your script well enough, you can use that is automatically create the folder hierarchy as well for you. It would be better than grids/forms spill in a folder on your computer/network.
Plan C
--------Review the U / I and click on about ten thousand times... Not recommended. Probably easier to curl up in the fetal position and cry yourself to sleep. :)
Plan D
--------
Use the API to script a solution for this. The disadvantage of going directly through the database is that if they ever change the page layout, you have to adjust your scripts. If you use APIs published, in THEORY, these types of changes are extracted from your share as long as the ENTRY and EXIT of the API do not change, utility no matter what you do will work just as well. Sometimes the change in the API to the point where you have to adjust your program anyway, although...It's probably the more correct way to this address, SQL scripting is quite simple and is probably easier knock out.
-
Forms of several columns, it will work?
Hi, I've investigated creation of multi-column forms in flex, many sites say can't do, others offer solutions complicated, who all have flaws.
No one has suggested simply put tags around a grid form? Is there a reason why it wouldn't work? It looks fine, it would break the form Submit function? There must be a reason why Flex programmers have not suggested a simple idea, no?
Thank you
<mx:Form>
<mx:Grid>
<mx:GridRow>
<mx:GridItem>
<mx:FormItem label="Name:">
<mx:TextInput id="test1" />
</mx:FormItem>
</mx:GridItem>
<mx:GridItem>
<mx:FormItem label="Email:">
<mx:TextInput id="test2" />
</mx:FormItem>
</mx:GridItem>
</mx:GridRow>
</mx:Grid>
</mx:Form>Visit this link
http://blog.flexexamples.com/2008/03/18/changing-the-layout-direction-of-a-form-item-in-FL ex /.
-
Hi all
I have the table with the name ac_supp_shed_main with columns supp_id, supp_name, delflag, net_amount, clear_amount, balance_amount
and a view named as view_supplier_dues.
I am retriving some specific lines to form the view_supplier_dues view and insert these specific lines in ac_supp_shed_main of a grid designed forms to oracle 10g with check_box control.
When check out some of the specific records it will insert in this table.
I have a procedure written in forms to load the data in the grid, if certain documents are inserted into this table prviously, then these files are coming up with checking these boxes in the grid.
My requirment is that if I am again you want to insert those verified records then these documents delflag value 'y' and registers
are not present in the table to insert in this table
I am writing in order to merge 10g oracle forms for this
-------------------------------------------------------------------------------------
merge into ac_supp_shed_main
using (select count (*) from v_count
from view_supplier_dues where bill_no = 12345 and bill_date ='01 - May - 2010 "(et supp_id = 345 and delflag = ' n ')"
When matched then
Update ac_supp_shed_main set delflag = 'y '.
When not matched then
insert into ac_supp_shed_main
(supp_id, supp_name, bill_no, bil_date, delflag)
values (234, "aunt stell Ltd.", 2323, 10-May-2010 ',' only)
It's show error MERGE online...
I give the example here.
Please give me one to achieve any solution...It's show error MERGE online.
ERROR? What is the error? I see no error?
Please be aware that we do not have your tables & we do not have your data.
Therefore, we can run, test, or improve your SQL posted.ALWAYS
View the name of the operating system (OS) & version for DB Server System.
View the results of
SELECT * from version $ v
or post the Oracle version with 4 decimalsWhen everything has failed, read the Fine Manual
http://download.Oracle.com/docs/CD/B19306_01/server.102/b14200/statements_9016.htm#i2081218Published by: sb92075 on May 29, 2010 10:14
-
organize images in the form of grid
Hello
How to organize images in the form of grid as a form of the matrix 2 x 2.
any solution please.
Kind regards
Hari
Thinnker,
I'm not sure I understand what you're trying to do, but I have modified what I could from your code to make it work without changing the structure so that it become unrecognizable to you.
I've replaced your IMAQ control with control of 2D image, because I have not installed IMAQ. This VI works as expected and load your file of jpg files in the table of the photo.
If you work with IMAQ, note that your images will be loaded all into the same reference IMAQ because you create only one (called untitled), so with each image you load, you override the earlier. You must move the IMAQ Create function in the loop For and generate a new reference for each image you want to load (each requires a unique string for its name).
-
Tengo una duda. request an auna persona correo y quisiera saber if hay forma that of donde el message process account? than one el ip y ke gridded parte fue enviado? Todos los correos I can find el ip? Hay alguna forma para borrarlo Québec no lo are? o are sent are no is you can hacer nada... ke estoy metida in a bronconononnn y no kisiera to en ke parte del mundo estoy... me pueden ayudarr
Hello
See this page to select your language:
http://support.Microsoft.com/common/international.aspx
====================================
Or sorry that it is area English.
On the top of this page of answers (English) v -click and set your language.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Essentially we are dumping a log in a grid file 'go block '. As part of the form, we'll add two variables (in the same datablock) like other variables of the grid. These descriptive variables are order and the line number and are located above the grid. When the user clicks on any other topic but line 1 these values are empty. If they click line 2 they are virgins but if they click back online a those values reappear.
Somehow, they relate to thoughts of one line - all about what I'm doing wrong.
Thanks in advance.
Dear Sir
The value that you assign is the first record only. This is why his watch when're it in the first record. How you assign values to the block (grid) of detail? If you use to insert lines, then you must write the code to assign values to these fields inside the loop.
Manu.
-
11.1.2.3 connection. Skipping to manage forms and ad-hoc grids
Hello
We went to 11.1.2.3 planning. and when an administrator logs in the application, the user sees the data forms in the main panel. It's the same selection you would see at Administration > manage forms and grids of the AdHoc. To open a data form, you must select a data form in the left navigation bar.
What I remember, it was, as users to return to the position when they left the game. Therefore, when they had a data form opened, disconnect, connect, they would see form a new.
Is it possible to recover this behavior?
Thanks in advance,
PH.
Yes it has changed, you are limited to the following - http://docs.oracle.com/cd/E40248_01/epm.1112/planning_admin_11123500/ch02s08s07.html
See you soon
John
-
Is there a way to change the security class for all forms/data grids?
Working on a 11.1.2.3 HFM application with more than 100 + data forms/grids and I need to change all of the class of security forms/grids to [Default].
Is there an effective way to do this? At the moment I have only 2 ways...1 extract all documents and open each form with a text editor to change the class of security, re - download to the workspace
2. manually change settings of security class in the workspace
Any ideas?
Thank you very muchAaron
Hello
I think that the best approach I've seen so far is to retrieve all documents via LCM (SSP), edit Web Forms with a text editor which can edit multiple files in the same file (Notepad ++) and then reload via LCM webforms.
More information about LCM: http://docs.oracle.com/cd/E40248_01/epm.1112/epm_lcm_user.pdf
Kind regards
Thanos
-
I have created a form and I'm trying to resize and move the fields around, but there is a very large grid that prevent me from doing this with any level of detail. How to turn off the grid or unlock the elements of the grid so that I can move freely?
View > show/hide > leaders & grills > Snap to Grid
-
How to fill out a form with a grid of points
I'm trying to recreate the style shown to the left, where a form irregular vector (a map) is filled with a grid consisting of entire points, without points of color.
When I create a shade of dot pattern and fill a form, I get the appearance shown at right, where the edge of the shape truncates points.
See this on how not to get angry with the removal:
-
How to extract the data in a grid format in an area of the bean in forms 6i?
Hello
I need help from all the gurus and the experienced people in forms 6i. I'm currently building the shape that will have certain text fields and a bean area that displays the records that I had entered. Suite to the essentials is the basic form structure, I am developing
1. There will be a search form that will have two text fields 'Emp ID' and 'Name Emp' and two buttons 'New' and 'find '.
2. There is an alternative, which will have an area of bean that allows to display the following columns in it in the form of a GRID
a. Emp ID
(b) name of the Emp of
This form will be also two 'Emp ID' and 'Name Emp' text fields.
3. when I press 'New' in the search engine so the second form should open and it will be empty. I can enter data into text fields and save the form. The area of the grid (the bean area) must be empty.
4. when I reopen the search form and enter the 'Emp Id' I just created in the previous step and click on the "Search" button then the following form should open and the "Emp Id" and the text "Emp name" fields must be populated with the data that I created in step 3 and the bean area must also display the record in the form of a grid.
I'm ok with all parties except the part of area of bean. Can you help me hpw to develop the form with the area of the bean and extract data when wanted and display as a grid?Take a look at the link I provided. Francis already has an example of implementation of a Java data grid on a form. The direct link is: http://forms.pjc.bean.over-blog.com/article-1830062.html
Craig...
Maybe you are looking for
-
I can't open the web development tools
I can't open the web developer tools tab in the firefox menu and the text is bold
-
Satellite P200 - removal / cutting of WebCam
Hello I work in the offshore waters in the United Arab Emirates United & just bought a P200 - with a built-in webcam. Unfortunately, I was not allowed to take the laptop to the large - due to not power cameras - at all. I was aware of the ban on phon
-
Satellite A100: Need to English instead of German recovery CD
Hello.I have an A100 of Germany and I wand to change it to English. If I can get the English recovery disk? I can compile one myself? Thank you
-
Problems of expression lookOut
Hello guys,. I met a very strange situation today. I created an expression in a file on the server which then be used for another calculation. To be sure my expression was working fine, I dragged the expression of a Panel to see if I could get a nu
-
My laptop Compaq Presario 2100, Win Xp, I disabled the login at startup screen. Then, had access to the admin. Laptop on the market today and it asks for a password... Never, I put a password and don't remember the username I created for other user a