H5360 projector remote control problem

Similar Questions

• Connect to projector remote control

  I have a laptop Toshiba Satellite L645-S4102, running Windows 7 and an EX5210 EPSON projector.  I am able to connect to the computer with the printer using a USB cable to show a POWER POINT program.  Images of the projector and the sound works fine.  But the the projector remote control does not work.  I have to use the arrow keys on the computer to move to the next slide.  Is there a way to set up my computer to pick up this remote?

  It hurts.

  I don't understand what you mean by "a PowerPoint to JPEG", but I suppose what you mean is that if you have a PowerPoint saved on a USB key and plug this drive to the USB port on the projector, you can control the presentation using the remote control.

  However, if you have a PowerPoint saved on the computer and then connect the computer using a cable between a USB port on the computer and the USB port on the projector, presentation displays via the projector but the remote does not work to move the slides.

  Just to make sure that things work properly if not, unplug the projector from the computer and start the presentation that your friend wants to show.  It should display on the computer screen.  Advancing slides when you click the left button of the mouse?

  When the projector is connected to the computer, have you tried all the other keys of the remote control?  In other words, the arrows (on the remote) move the cursor on the screen?  The Enter key act as a left mouse click?  The key is ESC acts as a right mouse click?

  Note that as work around might be not satisfactory, you can copy the presentation from the computer on the flash drive and use it the way you did in the past.  Or, as you have already done, use the arrow keys on the computer.

  I understand that the the User Guide for your projector says

  If necessary, configure your computer to work with an external USB mouse. See your computer
  documentation for more details.

  but I've never seen any system that requires a special configuration to use an external USB mouse.  All the ones I've seen that work as soon as they are installed.  If your remote control does not work as a wireless mouse, chances are that it never properly installed.

  In addition to the advice 'configure your computer', Epson FAQ on this subject says "make sure that your computer is selected as a source. Press the button of the computer on the remote control to select your computer as source"- but if the computer has not been selected as source, you would not see the screen, it's probably not the answer.

  If any, occurs when you connect the projector to the computer and turn on the projector?  You hear any sound or see a brief message pop up?  Do you remember if you hear or see anything the first time you connected to the projector to the computer?

  With the projector connected and turned on, go to the computer and click Start, type "Device Manager" (without the quotes) in the search box and press ENTER.

  Look through the Device Manager and if any device displays a warning icon, click twice on this device and to report (a) the full name of the device and (b) the full text, presented as "State of the device.

  If there is no warning icons, follow these steps (it's a bit of speculation on my part, because I don't have a projector like yours):

  • Click the triangle to the left of "Human Interface Devices" to expand the category.  Report the full names of each item in this category
  • Click the triangle to the left of "mice and other pointing devices" to expand the category.  Report the full names of each item in this category
  • Click the triangle to the left of "Human Interface Devices" to expand the category.  Report the full names of each item in this category
  • Click on the triangle located to the left of "De Bus USB controllers" to expand the category.  Is there an element with a name similar to "(USB) driver Microsoft mouse and keyboard detection"?
  • Browse through the categories and see if you can find a question relating to your Epson projector.  I don't know which category this might be it's not in the above 3 categories.  If you find it, please report (a) what category it's in, and (b) the full name of the device.

  EDIT TO ADD

  Your computer is connected to the Internet when you plugged the projector to the computer?

  Is your computer connected to the Internet now (or can connect if you want to do)?

  I ask these last two questions because it dawned on me that maybe by "configure your computer," Epson means that you must install the driver for the remote wireless mouse function.  Although it is possible that such a driver is embedded as part of a normal installation of Windows 7, it is more likely that when you plugged the projector to the computer, Windows would tried to access Windows Update to find the right driver.  Describes user guide the CD supplied with the projector as just "documentation projector" Epson must wait until the driver is built either in or is downloaded from Windows Update.  Alternatively, you can download the driver directly from Epson--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=188471&prodoid=63091522&infoType=Downloads&platform=nodetect

• Portege M800-PPM81E - installation of remote control problem

  Hello guys,.

  I have a problem to install the remote on this laptop.
  First the winbond CIR driver does not work, I try on different OS... the same message... "There is a problem with this Windows package install."

  A program run as part of the Setup did not finish as expected. Contact your supplier of staff or the package of support ".
  I've now installed Vista x 64... doesn't work.

  Thank you
  M.G.

  Hello

  Remove the old software on the remote control of the system.
  Then, visit the page of European driver of Toshiba and download the drivers and tools.

  On the Toshiba page I found the Remote Control Manager v.2.4.0.1. This driver is required for the remote control work.

• Qosmio F20-130: (infrared) remote control problem

  Hi guys,.

  got a little problem which I think I've seen on this forum before. My remote no longer works. Used to work properly. Now, with the laptop turned off and connected remotely, I can light up the lap top. However, it does nothing else. If I press a button, the red light on the remote flashes and the Red led on the receiver will Flash but nothing seems to happen.

  I checked in device manager and I have tried using another USB cable to connect the infra-red receiver. Any ideas on what could be the problem? There is no secret key which I pressed by accident is there which disables the remote control?

  Dave

  Hello

  I put t know if it helps but try to remove this command remotely in the Device Manager and unplugged the unit. After the new trial to restart to connect the remote control again.
  In addition, please check the batteries. I know the flesh of lights but nevertheless check.

• DMM 5.2.1 remote control problem

  Hey, I'm in the process of establishment of interpreters.  the skin I selected shows three icons.  1. video on demand 2. Electronic Program Guide 3. live TV channels

  Unfortunately, I'm not able to select whatever it is with the remote control (this isn't a remote color red/yellow... buttons)... remote control black regular came with the monitor lcd 32' ccisco. How to do this. I noticed that a few threads on this forum that relates to the color setting. a few buttons I see on the remote's (AV, food, entrance, sleep, psm, arc, auto, then numbers, menu, exit, together, mute, up, down, left, right)

  Thanks in advance.

  Vijay

  Vijay,

  Distance black, you have to control Cisco LCD, you must order the remote DPM in order to control the module CAST the number of room DMP-RM-K9 = (Digital Media Player Remote alternative)

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-margin : 0 ; mso-para-marge-bottom : .0001pt ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;} New remote (4310) reference:
  http://www.Cisco.com/en/us/partner/prod/collateral/video/ps9339/ps7220/data_sheet_c78-625677.html

  New remote (4400) reference:
  http://www.Cisco.com/en/us/partner/prod/collateral/video/ps9339/ps7220/data_sheet_c78-480272_ps6681_Products_Data_Sheet.html

  Sagar Dhanrale

  Cisco Systems

• remote control problems

  I'm trying to control a presentation Keynote on my Macbook Air to 2015 with an iphone 2015 6s.  Both devices have updated to OS and Keynote software.  Keynote on the Macbook is set to "enable remote" and he found the iphone.  But the iphone can't find the Macbook.  He just continues "looking for Macbook.  Both devices use the same residential Wi - Fi network.  Any suggestions on where to look the problem?

  It's the definitive method for the configuration and use of Keynote Remote: Keynote Remote using

• Toshiba SD - 63HK Home Theater system with remote control problem

  I have a Toshiba SD-63HK home theater system. Suddenly, the remote doesn't work this morning - I changed the batteries and it has no effect. Also tried again taking the DVD Player off the coast of the socket and of suite, and this doesn't have to do anything too. Someone at - it ideas? Everyone knows about similar problems with this system?

  Guess what; you are the first user of this forum that opened a thread on the Toshiba SD - 63HK Home Theater

  This system multimedia isn't known to me, but if your remote has stopped working and the batteries are not the reason for this problem; Then, there must be some kind of hardware malfunction.

  Maybe you can order this remote separately try to search on the internet for this part

• Portable window 8 remote control problem

  My laptop window 8 cannot remote connect with a Windows 7 Professional computer, after I put the username and password of the computer window 7, it still says "your credentials did not work".

  Hello

  Any problems with the remote connection is more appropriate in the Microsoft TechNet forums. I suggest you send the same question in the Microsoft TechNet forum for more help on this issue. We have a dedicated team to help you with questions of this connection distance.

  Microsoft TechNet Forum: http://social.technet.microsoft.com/Forums/en-US/home

  Please do not hesitate to visit our Web site for any help with the Windows operating system.

• Installation of the remote control problem

  Hello
  
  I want to install in the rcu on linux, so I went to the rcuhome/bin path and then run the command. / rcu (TI throwed the error "undefined DISPLAY.
  Set the DISPLAY environment variable, and then run again. »)
  
  so I tried to adjust the display as: $ export DISPLAY = 101.23.100.1:0.0 and checked in the env, it displays the same thing.
  
  but after setting the display when it run the same command again. / UCR he throwed error as below:
  
  Failed to initialize the recorder with location: /apps/OBIEE/Software/rcuHome/rcu/log/logdir.2012-01-06_12-36/rcu.log
  The initialization of the journal using the following location: /tmp/logdir.2012-01-06_12-36/rcu.log
  Exception in thread "main" java.lang.InternalError: can't connect to X 11 window server using '101.23.100.1:0.0' as the value of the DISPLAY variable.
  at sun.awt.X11GraphicsEnvironment.initDisplay (Native Method)
  in sun.awt.X11GraphicsEnvironment.access$ 100 (X11GraphicsEnvironment.java:52)
  to sun.awt.X11GraphicsEnvironment$ 1.run(X11GraphicsEnvironment.java:155)
  at java.security.AccessController.doPrivileged (Native Method)
  to sun.awt.X11GraphicsEnvironment. < clinit > (X11GraphicsEnvironment.java:131)
  at java.lang.Class.forName0 (Native Method)
  at java.lang.Class.forName(Class.java:169)
  at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:68)
  to sun.awt.X11.XToolkit. < clinit > (XToolkit.java:89)
  at java.lang.Class.forName0 (Native Method)
  at java.lang.Class.forName(Class.java:169)
  in java.awt.Toolkit$ 2.run(Toolkit.java:834)
  at java.security.AccessController.doPrivileged (Native Method)
  at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:826)
  at com.jgoodies.looks.LookUtils.isLowResolution(LookUtils.java:484)
  to com.jgoodies.looks.LookUtils. < clinit > (LookUtils.java:249)
  to com.jgoodies.looks.plastic.PlasticLookAndFeel. < clinit > (PlasticLookAndFeel.java:135)
  to oracle.sysman.assistants.rcu.ui.InteractiveRCUModel. < init > (InteractiveRCUModel.java:117)
  at oracle.sysman.assistants.rcu.Rcu.execute(Rcu.java:292)
  at oracle.sysman.assistants.rcu.Rcu.main(Rcu.java:344)
  
  
  any help?
  
  Thanks in advance

  Hello
  Yes, 100% you must have privileges to SYS. You cannot proceed without it. When you run the rcu utility, it will ask for db host, port, sid, SYS username, password. NOW, this remote is a great giant sql Script (s), which creates schemas, and Tablespaces, users, Tables, views, sequences, etc.. Regional coordinating unit must therefore details SYS. Some people will try to manually create these 2 patterns such as bi_platform, bi_mds and try to run the RCU. But it won't work.

  An option is, give the UCR Zip file to your SYS DBA self-introduction. Give him instructions. As unpack it and run the rcu.bat file. Its very simple. It takes about 15 meters. Procedure step by step, you can and let DB guys to do themselves.

  And Yes, you can run the RCU from any operating system like Windows or Linux. So in your case use Windows. All you need is db host, port, sid, user name, password for SYS SYS. That's all.

  Thank you
  Ravi Jegga

• 1700 MXP not respond remote control

  Hello

  One of my clients has problems with their codec MXP 1700.

  It no longer meets the remote control. They tried another remote of an edge 95 MXP that does not work either.

  The two remotes work with the decision of edge 95 MXP on batteries or a remote control problem.

  The remotes are the two TRC 4.

  I checked the deployment guides and admin and it says that the only way you can tell a MXP stops responding to the remote control is to Kiosk mode and select this option. The device is not in Kiosk mode.

  I have RMA had the codec. They have received a new and configured it but they have exactly the same problem.

  Here, any help would be greatly appreciated as I really don't want to have to do another RMA.

  Thank you very much

  Luke

  Check the following to ensure the functioning of the TRC4 remote:

  Control Panel > Menu Settings > KIOSK MODE SETTINGS > ALLOW the USE OF THE remote CONTROL: WE

  Control Panel > Menu Settings > KIOSK MODE SETTINGS > KIOSK MODE: OFF

  Once you have confirmed that ALLOW USE OF REMOTE CONTROL is enabled, you can use the shortcut key to activate the Menu.

  • Press the phone book 5 times and then press 2.  You should now be able to navigate in the menu of the MXP using the remote control.

  You can also increase the remote control IR signal, if necessary.  To access the switching of IR signals, you need to remove the cover of the batteries and batteries (see attached image) on the remote control.

• Remote control/software Apple TV with the App Store problems

  Seems ridiculous that a Sept 2016 4th Gen apple TV purchase has the same problems of connectivity with the App store. Impossible to connect, or even choose App store, or spare parts offline, erratic, glitch and acts as a problem of distance, but seems to be a software problem or interface. Obvious corrections or ideas to stabilize or least to increase connectivity to app store with 4th Gen Apple TV/remote control?

  No problem of connectivity with a 4th getting Apple TV remote here... Sorry, you encounter this problem with it.

  See if there is something that will help that you haven't tried in this article to support > set up the Apple TV Remote - Apple supported application

• Problem remote control RM-LVR2V Live-view

  RM-LVR2V can't conect with my camera AZ1, after that I updated with version 2.0 remote control

  Can I solve this problem. Sorry for my English

  Then. Hi again.
  I am happy to tell you - the problem is solved
  How?-turn on the remote and the camera.
  Use the button on the remote control and the cam rec start beny-BAA...
  right now must use wifi camera button until the beep stops.
  After that this remote control can be used with the camera

• long-lasting problems after windows scammersr had remote control of PC

  I got Asian male phone call to the effect that I had serious problems with a virus on my computer. He claimed to be the appeal on behalf of Microsoft Windows. Is not not in computer, I followed a number of directions to him which eventually led to him have the remote control of my computer. The number of callers evil disguised alarm of "oh my God" etc the alleged problems he has discovered and when the purpose of the payment was raised, I ended the call. The call lasted about 40 minutes, and he had the remote for about 5 minutes. It seemed to me that it was associated with a site named PC technocrat. My fear is now that he can have some future remote access or caused other problems that I have not yet thought.

  Unfortunately, once you give someone the remote control of your PC, they can do whatever they want.  There is no way for you to know what they did or did not.  You must assume the worst - they left behind software that allows them to take control of your system and/or take all the information they want it without your knowledge, and that they took any information they wanted while being connected.  Then contact the banks and other institutions in finaicial you do business with and take steps to protect your accounts and your credit cards.  Next would be to save only essential or element files and documents such as photos, music, etc and then destroy your computer and restore to factory new.

• Unable to connect: Remote Desktop control problem

  Original title: remote desktop control problem

  Hello, I am based in Bulgaria and I am trying to connect to the computer of a friend who is in the United Kingdom. He provide me with all the PC name, user name, and password information. I've tried almost everything I find in your site and the forum but still cannot connect and he can't understand where is the problem. I'll be more than happy if you could help me with this Russia.

  Kind regards

  Ivan Karchev

  Hello

  I suggest you to post your query on our Forums TechNet social as this question should be better there.

  Please refer to the reference to the link below to send your request:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Hope this information helps.

• Problem with remote control in Windows 7 Ultimate

  Hi guys,.

  I encountered a problem since I upgraded my HP Pavilion Elite m9651me from VISTA to Windows 7 Ultimate 64-bit

  the remote control has stopped working & I tried to look for a solution but no luck.

  Please can you help me with this problem

  Thank you.

  Published by looks on 02/11/2009 04:51

  Hi Jajomafa,

  My problem was resolved a few days ago.

  There was that an update of microsoft scored an important in the updates of windows, those I have installed my remote update started woking as if it were before.

  The name of the update was (AVerMedia AVerMedia - Streaming Media and broadcast devices - receiver consumer infrared)

  I suggest that you run the automatic update.

  I hope this helps.

  Kind regards.