hang on reboot after using bcdedit/debug on

Similar Questions

• Satellite M40: Recovery Procedure hangs on reboot after using the recovery CD

  Hi all

  I have a clients Sat M40-197, which was badly marred by malware that I did a full restore using the supplied disc that has the number of product PMR400490EN0. After the reboot, the system hangs just in normal mode and safe mode, I noticed that the last connected line is Mup.sys, but even in this mode the system always starts. I tried to use Ghost in advanced mode do not resize the partition, but not matter what I try, I can't start.

  Before taking what I think, this is my only option to use a standard OEM XP Home disk and the installation using the supplied product key I was wondering if anyone had solutions to this?

  Thanks in advance.

  Hello

  First looks like a mistake to restore CD. I mean it s possible that the CD is damaged or whatever and then some data is maybe damaged.

  If this isn't the case, then I guess that the following reasons:

  -HARD disk no is not correctly formatted-> reformat it completely and create a LARGE partition
  -HARD disk is defective-> check the HARD drive with a special HARD drive tool of the manufacturer (in most cases you can download it from the manufacturer's Web site)
  You can also download "UBCD4WIN" (just google for it) and check your HARD disk with built-in tools
  -Memory could be faulty-> use the "UBCD4WIN" and check the memory with "PI" or "SuperPI".

  She's...
  ;)

  Welcome them

• system hangs on reboot after installing graphics driver

  I have

  Dell Inspiron N4010

  Core i3

  Win7 Home Basic

  Intel HM57 chipset

  system hung up during use, restarted again, but he hung up again before the startup process, which happened 4-5 times, tried dell diagnostics, but has shown no hardware or memory problem, formatted the system, reinstalled Win7 Home Basic, installed all the drivers and it showed no problems until I installed the Intel Graphics Media Accelerator driver tried to install the driver updated, but it did not help, has run the Diagnotics processor tool Intel showed no problems, test result is pass, tried to format 2 or 3 times, but does help not anyway, I now have standard VGA graphics, impossible to install driver Intel Graphics Media Accelerator as he hangs up after that, please help...

  You have a portable computer, the drivers are obtained from that laptop manufacturers supports the site & nowhere else

  Probably you are not using the cd recovery Dell drivers/utilities

• XP hangs on reboot after download Windows Update & Installation

  Last Friday (September 16) after installing an automatic download of Windows Update (7 files) on my XP machine - SP3 OS, the restart procedure has begun to restart but "hung" just before the blue 'Welcome' screen, leaving a black screen with the cursor in the centre (cursor remains active). I suspect that a Windows or the files needed to move forward have been corrupted as a check of the HARD drive via another computer reports no problem with the drive.

  Finally I used the system provided by the OEM recovery CD to get the machine to boot into Windows, and although all the files that are on my "C" drive are still present, the Windows installation is actually a 'new' version of XP where any of my programs are available. In the root directory, there is now a second WINDOWS folder with the label "WINDOWS.0" that is clearly the source of the software used to initiate the Windows.My questions are:

  1. is there a procedure to "transpose" the old Windows installation in the new facility thus effectively regain its original configuration and my PC?... or

  2. I have to re - install all my software from scratch?

  3. If I have to can start from scratch with my programs I at least transfer my documents and settings (including emails) of the 'old' facility to the new?

  P. S.

  I know there is a 'Settings Transfer Wizard"but I think understand that it must be 'run' on a working version of the old installation of Windows first to generate the"file transfer"... it's clearly something that I'm unable to do.

  As an afterthought:

  Does anyone have any suggestions why or files could been corrupted because replace this (or these) would probably be the most elegant way to resurrect my machine to its original state?

  1 # because you used the recovery CD to do a factory reset, all your old data is lost.
  2. Yes.

  How to restore your Windows.old folder in a new Installation
  http://www.Vistax64.com/tutorials/237033-Windows-old-folder-restore-into-new-installation.html

  PS Windows is not booting from the folder windows.old against your perception.

• iMac late 2012 edition hangs on reboot after installing Sierra

  I installed on my iMac, edition end of 2012 Sierra, and now it crashes when rebooting and turns off (black screen).

  It has worked very well since the upgrade to Sierra yesterday, but this morning I rebooted and the iMac stop at Midway through the boot process. I turned on several times, but it keep crashing to half way through the implementation process and turns off the power (Black screen and power total power off).

  I reboot in Recovery mode, (key command-R during restart) and am currently OS X via my latest TimeMachine recovery upward. According to the screen, the restoration will take about 2 hours to complete.

  If someone has encountered this problem, and if so, will identify you the cause of the problem?

  No problem on my Mac Pro 2010 but usually this kind of problem can be traced back to the 3rd install party who tries to run at startup.

  If the problem persists try to start in safe mode

  Try safe mode if your Mac does not end commissioning - Apple Support

• Satellite P500 - loop of reboot after using the Toshiba Recovery disk

  Hello

  I have a problem recovery SATELLITE P500. I did the recovery disks. It starts ok on the recovery disk and format the hard drive and copy the disks to the hard drive. Then, he begins installing windows and restarts.

  He then goes to a loop
  (1) marketing and says "Setup is preparing your computer for first use.
  (2) Toshiba banner saying please wait... Second installation may take several minutes. Pleae do not interrupt or shut down the computer!
  (3) Windows logo
  (4) close...
  (5) restarts and goes to 1)

  It would be great if someone could help me with this.

  Thank you very much
  Softari

  Hello

  I noticed the same thing on my Satellite P500, but I must say it s not a problem, it of quite normal. The computer will restart several times (10 times or more) to complete the installation.

  You know that a lot of drivers/tools will be installed and some restart is required to configure everything properly.

  So don t interrupt the installation of recovery, just wait a little longer and a coffee. Everything is done automatically and your laptop is reinstalled with the factory settings. :)

• My computer hangs on reboot after that I got Disabling UAC. Norton 360 5.0 indicates I have no virus.

  I am trying to disable User Account Control (UAC), but when I do my computer crashes when I restart. I have to restart in safe mode and turn on UAC to avoid the crash. I repeated this process a few times, so I don't know what the UAC which is responsible in some way.
  No one knows why this is happening or had a similar event? I have run Norton and malware programs and do not seem to have any bugs.
  I'd appreciate any comments at all. Thank you

  Hello

  User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users.

  We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  For more information, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off

  You can perform the clean boot and check for the issue:
  http://support.Microsoft.com/kb/929135
  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• Trackpad unusable after using the Wacom Tablet

  After using my graphics tablet pro Wacom Intros to edit images, the trackpad becomes unusable. Even when not frozen it will not properly work without a reboot. This happens every time, so it becomes a bit of a drag.

  I use an iMac of mid-2011 and OSX 10.11.4.

  Would like to know how this can be corrected.

  Post edited by: added gPhot wacom device description

  The tablet pen and wacom are known causes of interference.   Move them well away from your computer and try again.   With no improvement, move them temporarily out of the room and try again.   You need to establish that it is the culprit.  Once it is proven, you will need to find a way to work the problem goods because you can not blame the system for causes of interference.

• RILD eats the battery after using my music

  Strange coincidence, but both times I had the process rild run amok and obliterate my battery on my Droid4 have been after using the MyMusic player provided by Motorola. Restart the phone (lock + low-flying 10 dry) does not help, power-off-then-on does not help. The only thing that stops rild for me so far is to run the battery at 0% while cooking the entire phone to a bunch of warm pipes until it stops. Recharge and reboot - everything is fine - for a while.

  Sorry to hear that it is happeneing you. We already have a current thread on this issue where Matt from Motorola is involved in this thread.

  I'm closing this thread to keeos organized things.

  You can often find answers and avoid the double post if you use the search at the top of each page.

  here is the link to the current thread.

  Thank you

• Windows not loading after system reboot after installation of the last security update.

  Windows not loading after system reboot after installation of the last security update. Have you tried last known good Configuration, Safe Mode, neither of her works.

  No matter which option to choose, it comes to me to the BIOS boot screen after 5 seconds in loading Windows.

  Running Windows Vista 32 - Bit with SP2 installed system. 2 GB OF RAM. Intel G31 Mobo.

  Dated this February 11, 2010.

  I managed to restore my Windows to previous restore point, using the CD of Vista to start, and then select repair Windows. I hope this helps.

• When to reboot after deleting or adding a program

  I'm doing a system reformat on my computer. I would uninstall all the frivolous programs that came with the computer (for example, the evaluation version) until I put a new system restore point. My question is: if I have TO RESTART my computer after EACH program I uninstall it from the control panel (Add / Remove Programs)? OR can I just "delete" them all at once, then do a restart.

  Similarly, can I restart my computer after EACH application I have installed? For example, to install Norton 360 > restart > then install MS Office > restart > then install Adobe Creative Suite > restart > etc, etc. ?

  I personally would like to always re - start when asked.

  Not all programs will require a reboot after the installation or the removal, so in your situation I would re - start when you are prompted.

  If you don't re - start whenever there is a (small) possibility that some files can not be erased when you re-boot.

  If you are looking to get rid of all the pre-installed stuff, look for a program called "de-Crapifier PC", I have not used it myself, but it seems to have a lot of comments and recommendations in all popular PC press.

  HTH

  Neil

  www.nwarwick.co.UK

• When I reboot after installation of service pack 2, the message comes out and says that updates are not configured correctly, returning from changes

  When I reboot after installation of service pack 2 on a computer laptop with Windows Vista Home Premium 32-bit Dell XPS M1530, the message comes out and says that updates are not configured correctly, returning from changes. Do not turn off your computer. I installed update readiness tool, but it does still every time. I tried to disable the antivirus software prior to installation.

  Hello
   
   
   
  1. how you try to install Service Pack 2?
  2. are you able to boot to the desktop?

   

   
  Method:
  Step 1: If you are able to start the computer in normal mode, then try a clean boot.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135
  Please note: after troubleshooting, start the computer in normal mode.

   
  Step 2: Try to install Service Pack 2 manually.
  http://www.Microsoft.com/en-us/download/default.aspx
   
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791
  
   
   
  If you are unable to start the computer, then you can follow this link to start the computer in safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
   
   

   

  If you are unable to install Service pack 2, you can consult this article.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

  Please note: method 2 refers about upgrade on site.  Perform a repair installation/place will not damage files and applications that are currently installed on your computer.   However, I suggest you to back up all important data on the computer before you perform the upgrade on the spot.

   

   

   

   
   
   
   

• HP MS235 pavilion in a single reboot after the start screen guard

  Hi all.

  can anyone help wih this problem I have with my computer hp pavilion MS235 that keeps just reboot after the splash screen.

  What happens is that the system began to hang at start up. It would take about an hour to get to the Welcome screen. could not do anything even not to make a recovery, so I put the drive in another machine and he made a new installation. but since then it just keeps restarting to the start screen. I ran all kinds chech af, but nothing works.  I'm on win 7 x 64.

  Please can someone help! Thank you.

  Concerning

  Dave.

  Start at this page: http://support.hp.com/us-en/document/bph07143

  Or here: http://www.computersurgeons.com/SearchProducts.aspx?sbt=pavilion%20MS235&bkm=Results#Results

• Windows 7 32 bit Auto reboot after update Nag

  Hey guys...  Why my pc reboots after Windows updates?  The HORSE appears but never does the County down and restarts.  I check group policy and "No Auto restart with logged on user" is not enabled (still set to not configured).  I checked Regedit HKEY_LOCAL_MACHINE\SOFTWARE\POLICIES\MICROSOFT\WINDOWS\WINDOWSUPDATE\AU\

  NoAutoRebootWithLoggedOnUsers is undefined.  We have wanted this to put on for our users, but can't seem to make it work.  As I said, the HORSE appears and you can postone, but if you do not touch the pc never restarts.  FYI, we use the server 2008R2 Standard GP.  Thank you

  Hello Makinsey,

  Thanks for posting your question on the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.

  TechNet Forum
  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  Thank you

• Spit Lightroom 4.3 when using the brush after using the red eye tool

  I bought Lightroom a few days ago. I was traveling so I didn't have the time to 4.3.

  The version shipped with the disk (4.1) worked like a dream. I downloaded 4.3 yesterday and I couldn't be sadder. First of all, I noticed that it cause the 'root' to use more CPU, which means that it does not use the CPU for Lightroom itself. More demand is usually and significantly slower than the original one.

  Today, I used the red eyes for the first time, and I can't just brush top unless it crashes! It is simply impossible. I rebooted. Upgrade my Mac OS 10.7.5...  No use. I even uninstalled and reinstalled again. I was forced to do all my first edit in there usinf the brush, then use the tool red eyes as the last step. But any time that I commit the brush after using the red eye tool, it crashes instantly

  It seems something funny on your establishment for sure that there is not a wide spread thing.

  What exactly is your establishment and where are the various files located - catalogue, images, etc.