Hard drive does not

Similar Questions

• Toshiba Stor.E Canvio HARD drive does not appear

  Hello

  I got a Toshiba Stor.E Canvio for about 2 years without problems

  By using the external drive recently and the USB cable is removed accidentally. After attempting to connect the USB on my Mac again once the external HARD drive does not appear in the Finder.

  Passing through the disk utility, the hard drive is visible, but I am unable to check or repair the disk.

  The message I get is

  "Peut-t disk utility repair this disk. "Save as many files as possible, reformat the drive and restore your backed up files.

  The HARD drive itself is turned on, the light is on... but I'm stuck now

  Any help would be appreciated

  Gary

  I m not iOS expert and, therefore, I cannot recommend to any advanced troubleshooting but recommend you check out this thread:
  http://Apple.StackExchange.com/questions/130304

• my computer detects the usb pen, but when I try to send files to it in "send to" my hard drive does not appear.

  Usb detects the dvd player and my external hard drive, but does not detect my hard drive. I tried to disconnect the external hard drive, but still, it does not detect my hard drive. The drive letter is E: and pen usb H: external drive letter is F: HELP!

  When I try to send files to it in "send to" my hard drive does not appear

  What hard drive, external or internal? Normally only removable devices appear in the mailing list.

  You could use copy and paste instead, or see the following article...

  http://support.Microsoft.com/kb/310270

  .. how .to add items to send it to the list.

  Tricky

• my hard drive does not work, I can not download my antivirous

  my hard drive does not work, I can not download my antivirous

  Here are a few articles with possible solutions and its fix for the hard drive problems.  Maybe at least will help any problems you encounter.  I could have provided more targeted recommendations if you had provided more information about what the problem is exactly, when he started, the manufacturer, make and model of drive, how the player does not work - is that it recognized by the system, it appears in Windows Explorerr, the door opens when you press the button...  If the following text does not, provide this and more information about the problem and your configuration maybe we can provide additional assistance.

  Compliments and thanks to the spirit of another thread:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.microsoft.com/gp/cd_dvd_drive_problems - A Mr Fixit

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Toshiba canvio 1 TB portable hard drive does not work with windows 8

  The drinking Toshiba Canvio 1 TB hard drive is compatible with Windows 8?

  Hi Michael,

  Welcome to Microsoft Community and we are happy to help you on this question.

  According to the description of the query, the Toshiba Canvio 1 TB portable hard drive does not work on the computer.

  I ask you to answer some question in the context of this question:

  Do you have an error message when you try to access the hard disk on the computer? If Yes, what is the exact error message you get?

  I would like to inform you that the Toshiba Canvio portable hard drive is compatible with Windows 8.

  You can check the link to verify this compatibility with Windows Compatibility Center:

  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=Toshiba%2Bcanvio%2Bportable%2Bhard%2Bdrive%2B&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  Please answer us with the required information on this issue in order to help you.

  Let us know if you have other Windows related issues.

• Seagate 2 TB external hard drive does not register

  I almost always took care to disconnect the drive safely, and continued to work well when he is accidentally unplugged (only happened 3 - 4 times). Today he did not appear in the office or in the finder, the responses in this thread, external HARD drive Seagate will appear not in place were a little helpful but did not fix my problem. Here are some of the facts of the case, somehow:

  • I use a 2012 MacBook Pro running El Capitan with a 1 TB hard drive (this was added later when the original drive has failed)
  • External hard disk was used to transfer large files a bit to a laptop running Windows 8 and was not ejected safely from this computer
  • The reader is displayed correctly on other MacBooks (tested today) and all files are in order.
  • The drive appears in the report of the system but does not appear in the disk utility.
  • The drive does not appear in the Seagate dashboard that was installed when the car was purchased.
  • The drive has two partitions: one for Time Machine and the other to the format to work on Mac and Windows to store normal files.
  • My MacBook has been impossible to open a .dmg file today, unconnected with. I do not have this issue.

  I'd appreciate any help you can give. Thank you!

  Riley G. says:

  I almost always took care to disconnect the drive safely, and continued to work well when he is accidentally unplugged (only happened 3 - 4 times). Today he did not appear in the office or in the finder, the responses in this thread, external HARD drive Seagate will appear not in place were a little helpful but did not fix my problem. Here are some of the facts of the case, somehow:

  • I use a 2012 MacBook Pro running El Capitan with a 1 TB hard drive (this was added later when the original drive has failed)
  • External hard disk was used to transfer large files a bit to a laptop running Windows 8 and was not ejected safely from this computer
  • The reader is displayed correctly on other MacBooks (tested today) and all files are in order.
  • The drive appears in the report of the system but does not appear in the disk utility.
  • The drive does not appear in the Seagate dashboard that was installed when the car was purchased.
  • The drive has two partitions: one for Time Machine and the other to the format to work on Mac and Windows to store normal files.
  • My MacBook has been impossible to open a .dmg file today, unconnected with. I do not have this issue.

  If it shows in disk utility > file >Mount

  
  

• Toshiba Canvio Basics HARD drive does not appear in my computer

  Hello

  I have a HDTB110AK3BA - Toshiba 1 TB Canvio Plus Portable Hard Drive for storage 3.0 Basics and the computer will allow it to connect, but it does not appear in my computer / pc is in Device Manager thought but not my pc

  Please help and Windows 7 or windows 8.1 PC do the same thing.

  Hello

  I found the description of the product of this external HARD disk:

  Product features:
  • USB 3.0 - powered portable add-on storage.
  • Voltage of bus capable USB, no need for AC adapter.
  • Easy to use with no software to install.
  • Adapts to large digital files with spacious storage capacity.
  • Protect your drive (internal shock sensor and ramp loading technology).

  Specifications
  • Capacity: 1.0 TB
  • Interface: USB 3.0
  • Transfer rate: up to 5 Gb/s
  • Speed: 5 400 rpm
  • Average access time: 12ms
  • Cache buffer: 8 MB

  It is a HARD USB 3.0 drive. No doubt the HARD drive is not recognized correctly in windows exploerer due to the low power.
  The USB 2.0 port common feeds only 500mA. The USB 3.0 device must be able to 900mA.
  Therefore, it would be advisable to connect this 2 ports USB 2.0 HARD drive with a USB Y cable

• New hard drive does not appear in the disk utility

  I am installing a new hard drive in my late 2011 13 "MacBook Pro. I started using apple's online retrieval system and went to disk utility. I tried to format the drive, but he is stuck saying "remove disc" for about a half hour, and then I had a rotation beach ball and could not move the cursor. I restarted the computer and now the drive does not appear in the disk utility. Any help is appreciated as I have no idea where to go from here.

  Thank you.

  You will may be turned off and check that your hard drive is correctly positioned with all the screws tight.

• Problem with installing Windows on a hard drive, HARD drive does not get detected after installation

  Original title: help with hard drive of the computer.

  Flow of the problem:

  My aunt tried to install windows 7 on the previous copy of windows 8. Needless to say that it doesn't work and it has messed up the hard drive. So, I bought a vacuum. I formatted the hard drive using my other windows computer to have 2 partitions: a boot partition and system partition, and then used the program WinToUSB to install windows on the hard disk. The reason I did it is, because no matter how many times I changed the BIOS in my laptop of aunts, it wouldn't boot from the DVD player to load the windows software. After a few hours, I found WinToUSB. Once windows has been installed, I plugged it into the laptop. For a few hours, I didn't know what to do, because the computer does not recognize the hard drive (he said: "Not detected"). I decided to start from legacy, and then the screen deals

  «intell...» »

  and a bunch of dates, etc all the stuff on the screen to load legacy if you know what I mean.

  He said "not plugged in the media. Check the power cord.

  Then quickly changed screen before I can read almost anything and it goes to the normal windows screen black (with 4 colors). I said to myself, how can he be loading if the hard drive is not detected... Once it is loaded, he brought me to the blue screen (blue screen of death, if you want) I turned the computer on again, always noticing the hard drive was not detected. I ran all the recovery/repair options I could and turned off the laptop. I came back a few hours ago and I loaded the computer again and went into the BIOS.  He said that the hard drive has been detected and said the news about this, as usual. However, at the start of the legacy of windows loading screen, it said still not detected.  I then started to windows to see since it is now detected if that fixes the blue screen. Yet, there is no. I tried to go to the normal windows and screen remains blue. any ideas?

  Hello Chris,

  Thank you for visiting Microsoft Community.

  According to the description, it seems that Windows was not properly installed on the hard drive. I'm not sure how to work the software from third-party manufacturers WinToUSB and reliable installation process is. Microsoft does not recommend using any third party tool to install Windows on your computer, the use of these third-party tools can cause serious damage to your computer.

  I would say to format the hard drive once more and try to install Windows through normal Windows installation process.

  Refer to the section "using the installation option custom if no operating system is installed" in the thread below.

  Installing and reinstalling Windows

  http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-7

  If you are not able to install Windows on the hard drive at all, I suggest you to contact the hard drive manufacturer to obtain a diagnosis of material performed on the hard drive.

  Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.

• Canvio Plus 2.5 "1 TB external HARD drive does not work with USB 3.0

  I've had this drive for about a month.

  I am on Windows 7

  I can only operate by connecting to USB 2.0 ports. It is then visible in 'My Computer'.

  If I connect to USB 3.0, it turns on the case but does not appear in 'My Computer'.

  I tried it on all my USB ports 3.0 - up on one and two in the back of my case.

  I checked my BIOS and USB 3.0 is enabled.

  I tried to follow the suggestions in the user manual, but the drive does not appear in the management of so connected devices on USB 3.0, but it does when connected in USB 2.0.

  Any ideas?

  Hello

  As much as I know the Windows 7 system requires installation of additional USB 3.0 driver.

  Many laptops and computers use USB 3.0 driver that was released by Intel... it is because of Intel chipset...

  I guess that USB 3.0 is already installed, but probably you need to update the driver at least to the newest version...

• Hard drives does not after created vm web client

  I'm under esxi 5.5 with the web client vsphere. When creating a virtual machine through the customer web of hard drives are not appear. I go through the process and click Finish and everything will check fine no errors, but when I go to edit the virtual machine without hard drives are showing. Now, if I create the virtual machine via the vsphere client it all works. I tried in the client web creation v10 and below the virtual machine and still the same result.

  Just solved the problem. I went ahead and reset services and it works now. The weird part is that the hard drives or specific devices have not been created and there where no errors at all. I guess that the constant permutation between vsphere and web client cause something in the background

• Drive external hard drive does not appear under "devices."

  Hello

  I just updated my OS to Sierra of MacOS. I have connected my external hard drive (HDD) and it does not appear under "Devices" in my Finder window. It worked fine before the update.

  I use a MacBook Pro (end of 2013), currently running MacOS Sierra (Version 10.12). My external HARD drive is a SeaGate Slim SL Media (500 GB).

  The external HARD disk appears in disk utility application. He also appears on the about this Mac > system report > USB. I don't know what the problem is, the external HARD disk is identified but does not appear for use in the Finder window.

  I read that it could possibly be in mode 'sleep' and putting the MacBook to sleep (while it is plugged into the external HARD drive) and it to wake up again should solve the problem. However, it did not work. No more restarting my MacBook. It was mentioned in another post that it may require extra power, so I attached power adapter and again, without success.

  I do not want to clear the contents of the external HARD drive.

  Is there a way to get my external HARD drive works as expected with my MacBook?

  Thank you much in advance.

  I also have this problem.

  My camera is Macbook Pro 13 "retina 2015 and Seagate Backup more 1 TB (NTFS - Paragon NTFS)

  * Edit *.

  

  My HDD show in report system > hardware > USB

  but it does not show in Finder or Desktop.

• External hard drive does not

  I have a Seagate external hard drive purchased from Apple and placed many files, now it does not appear on my MacPro? How can I see the files backed up? Or how do I fix this?

  Contact Seagate technical support for help with their product. Meanwhile, you might try to connect to a different port, cable and repair the disk with disk utility.

  Repair the disk for El Capitan

  1. Restart the computer and after the chime hold down the command and R until the Utility Menu appears.
  2. Disk utility and click on the continue button.
  3. Then select layouts withdrawal (usually Macintosh HD) entry of the volume of the list to one side.
  4. Click the first aid tab on the toolbar and wait for the fact button to activate. Click it, and then quit disk utility.
  5. Select restart from the Apple menu.

• HARD drive does not detect the Tecra R940-1JG

  Hello

  I had double partition on the HDD for win7 pro and Win 10, but after update Win 10 that he was unable to start.

  I disconnected the drive and connected to my office and managed to recover the data.
  It works find in desktop, but it does not detect my Toshiba Tecra.

  I had an another 120 GB and tested in my Toshiba laptop and it works and detects ok.

  I change the settings of UEFI and AHCI but no joy.

  HARD drive is seen by BIOS?
  HARD drive appears on the first page of the BIOS?

• Toshiba 1 TB external HARD drive does not work

  I have a 1 to external drive what cards via usb cable, Ive put a lot of multimedia files on it and have been using it without problems don't have nothing put on for a little while, went to look for some files off it and comes up with usb not recognized, put it in another computer and the light comes done hard disk a rattling for a few seconds then hummes just as if it turns While the light stays on and is not all pulse, on the computer, it emits a sound to say ive plugged the on the bottom, it says safely remove hardware.

  Ive tried on two computers when in my computer it does not record.

  PS im not the tool sharper in the hangar when it come to tech stuff.

  The same problem. I bought edition 2015 last fall. It has a power supply problem (electrical problems). I thought it's because of my laptop. He made her crazy, but SMART was ok. Yesterday, it makes noises again and now it does not work. I saw light blue and only a little sound of pcb as start start. I saw that head of player on the Board.
  It's really a defection from the factory.

• Tecra 750DVD: HARD drive does not contain valid FAT or FAT32

  Hi people, been problems since a week now.
  Old hard drive died so installed a new.
  Set startup disk in and it all starts to load and then I get the message "Windows 98 has detected that C does not contain a valid FAT partition FAT32 ot. There are several possible causes.
  Then at the bottom of the three options
  Device not found driver: "MSCDOO1."
  Invalid device CDROM drivers selected
  then
  To get help, type HELP and press ENTER
  A:\ >

  When I type FDISK all I get a message that says
  No fixed disk present.
  So I'm stuck.

  Any ideas suggestions? Can't see a way past it.
  Everyone?

  Thank you

  I assume that you have placed this HARD drive in the laptop, but you have not formatted it.
  If you want to install a Win98 HARD drive must contain a FAT or FAT32 file system.
  I recommend booting from the Windows XP CD and format.