Hard drive in Windows 7 at boot error

Similar Questions

• My previous version of windows (which is already installed on the hard drive) will erase if I boot from a bootable USB. Please help me!

  I have Windows 8 is installed and an iso of Windows 8.1 on my USB.

  My previous version of windows (which is already installed on the hard drive) will erase if I boot from a bootable USB. Please help me!

  When you upgrade to 8.1 Windows it will replace your Windows 8.0. The only way I know to have both is to buy a copy of Windows 8.1 and install on another partition or drive.  Hope this helps and if you need another post to help and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir

• Is it possible to extract personal folders from my hard drive and transfer to an external hard drive if Windows does not start?

  Hello, I recently started my Windows XP Dell computer and it should start up normally unless it would run the ChkDsk utility. It would freeze then 68% on stage 1 and goes no further. I called the people of Dell and after trying so many solutions, including safe mode, safe mode with network and CommandPrompt, we ran the diagnosis. The hard drive and memory are fine, no errors. He concluded that it was the operating system and must be restored. However, I have important files, I need to extract from my hard drive and he recommended me an external hard drive. I bought it, but now I'm not sure how to extract my files from my drive hard if Windows can not even boot the desktop computer. Is it possible to extract these files without the use of the desktop computer?

  And you've burned the .iso image, and not as data? If Yes, then you have created a bootable CD. Put it in your optical drive and restart the computer. You may need to change the boot order in your BIOS. With some machines, you can get a temporary startup command menu by pressing a function such as F12 at startup. Other computers require that you enter setup and change the boot order in the optical drive first of all from there. When you start your computer it will be information about which key press to enter the BIOS (Setup) or give you the temporary boot order.

  After you changed the boot order to boot first from the CD and rebooted the computer, Knoppix will boot. Have your external hard drive connected to the computer before you start doing this. After Knoppix is finished booting, you will be in his office. It will be very similar to Windows. There are icons on the desktop for your internal hard drive and the external hard drive. Copy files from the internal to the external drive as you want. Review what I wrote about the use of Knoppix in my previous answer. MS - MVP - Elephant Boy computers - don't panic!

• New hard drive, fresh install. No boot disk?

  As I wanted a SSD in my laptop, I decided to install one in my laptop newly purchased, thus eliminating the original HDD with windows 8 installed.

  I was unable to install windows 7 from a USB boot (saying there was "no boot drive"), so I decided to use another laptop to install windows 7 and then replace the SSD in laptop computer provided.

  However, after I installed properly Windows 7 on SSD (loads Windows on another laptop), after placing in the laptop provided, I had once more the message that there is no boot disk.

  It recognizes the SSD in BIOS. I swapped the boot order to start the first SSD, but it does not recognize anything as something bootable.

  When you place the original HARD drive, with Windows 8 is installed, everything loads very well. But nothing else that the original OS on the original disk will not load.

  No BSOD, no real error message. Just a message popping up, saying there is no bootable disk.

  Is there something that I missed or messed up?

  Not a letter.

  It is first in the boot order, named: "HDD0: [insert name SSD]."

• Satellite M30 is not unbootable HARD drive and I can find no error

  When I start the laptop, I get only a black screen (after the Toshiba/Bios screen) and a flashing cursor. Nothing else happens. I didn't like the change of configuration, updates etc. before that happened.
  I am able to start the computer from the CD (with a XP pro CD or UBCD4win) drive and access the hard drive (so I was able to copy all of my data to an external hard drive), it does not start only windows (XP Professional SP3) from this drive!

  Using UBCD4win, I ran diagnosis tools like memtest and TestDisk, without any reported errors. I also ran DFT (drive fitness test) of Hitachi (which is my hard drive manufacturer). Have not found errors, too. I also tried the repair install of windows, which went very well, but has not changed the situation at all. Also, I tried fixboot, fixmbr and bootcfg/rebuild of the recovery console, does not solve the problem. Load default BIOS - no change. I'm out of ideas...

  So does anyone have an idea what's wrong with the system? I find no error, but this thing just does not start from the hard drive. Any idea/input is very appreciated!

  Hey Buddy

  > there must be a way to solve the problem without having to reinstall the entire system.
  I doubt that!
  Not all problems can be solved without having to reinstall Windows.

  I know this is strange and it takes a lot of time to install all your programs, but I think that in this case, it is the only solution for this. I mean you have tried many things and if a Windows repair installation does not, for me are obvious: a relocation complete!

  You can spend more time to solve this problem without having to reinstall Windows, but don t forget you can do a complete new installation at the same time.
  Think about it! ;)

  Good luck!

• XP remote hard drive problem - Windows 7.

  I have a 500 GB external hard drive (Seagate expansion Portable Drive) my father format & loaded but when I tried to access it told me that I had to format. Then I formatted it & he wiped the data but now they can access it. He's got windows7 I have xp, what is our problem?

  Hi ArnoldRendell,

  ·         You get the error message?

  ·         Are you able to access the external hard drive in Windows XP?

  Follow these methods.

  Method 1: Performs a search on the external hard drive using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2: Run the disk check to check for possible errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  For reference:

  How to defragment your disk Volumes in Windows XP

  http://support.Microsoft.com/kb/314848

  How to analyze and defragment a Windows XP disk

  http://support.Microsoft.com/kb/305781

• oxC004F061. After replacing a failed hard drive, windows 7 do not allow me to activate. I had replaced a previous hard drive with window xp verson with this same program windows 7.

  Two years ago, that a virus killed my hard drive of windows xp.  Dell has replaced the hard drive as it was under warranty, but spoke to me by getting the upgrade to windows 7.  It was installed after that the new hard drive was put in and worked great until 3 weeks ago, when the hard drive is dead again. replaced the hard drive and put it in the installation discs but do not know where I was wrong.  It will not let me activate windows and gives me the code 0 x C004F061.  I'm short on time to enable any suggestions on what to do.

  See:

  http://Windows.Microsoft.com/en-us/Windows7/Windows-7-activation-error-0xC004F061

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• I can't save Acrobat 8 standard after a hard drive failure and keep getting an error every time I try and use it. Y at - it something I can do.

  I can't save Acrobat 8 standard after a hard drive failure and keep getting an error every time I try and use it. Is that what I can do to get rid of the message. The message reads "a problem has been experienced while trying to send information on the internet.

  Hi philh76405255,

  I'm sorry for the inconvenience caused.

  Please refer to the following solution: -.

  (1) find the file acrobat.exe on your computer. Right-click on the program and click "troubleshoot compatibility". Set the compatibility of the operating system installed on your computer.

  (2) if it asks you to register several times, please refer to this doc. KB: easier to register several times. Acrobat 8 | Windows

  That might solve your problem.

  In case if you have still any question, please let us know. We will be more than happy to help you.

  Kind regards

  Nicos

• I want to transfer my files to my external hard drive free windows click on my mac, it recognizes the drive but I can't nothing or see the files. Any help is appreciated

  I need to transfer my files to my external hard drive free windows click on my mac.  I can see the drive but cannot do anything or transfer.  any help is appreciated.

  The drive does not appear in the Finder?  Do you get an icon for it on your desktop?

  You say that it recognizes the drive, how exactly, what is the point?

  What happens when you try to use it?

  How the drive is formatted?  Is it encrypted?

• How can I play DVDs from my hard drive with windows XP?

  How can I play DVDs from my hard drive with windows XP?

  If you have a decdoer of installed dvd, usually with packages like power dvd etc that allow you to watch a dvd in your dvd drive, and then later versions of Media Player will also play your DVDs, and all of these programs that play said removable DVD.

• I have a hard drive with windows xp, ive got the activation code, but it will not accept it.

  Hey what is that I built a desktop computer and this friend gave me a hard drive with windows xp on it and he gave me the activation code, I tried in my computer and told me
  to communicate with you by telephone imed them all the information they demand and said it had been hacked and to get in touch with microsoft can yo help me please. sincerely, Mr. B Burnett.

  Hello

  You have the product key for Windows XP?

  I suggest to return the item to you and check if you have a genuine copy of Windows XP:

  How to activate Windows XP

  http://support.Microsoft.com/kb/307890

  Windows Genuine Advantage does not validate a copy of Windows XP

  http://support.Microsoft.com/kb/916247

  Genuine Windows: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/help/genuine/FAQ

• How can I restore my backup files on an external hard drive using Windows XP SP3?

  I back up my files to an external hard drive using windows XP sp2. My pc crashed and re installed with Windows XP sp3. Now I can't find the backup on the system tools utility. How can I restore my backup files. Help, please.

  Hi PML.

  Yes, I used the built in «Back to the top of the tool» Unfortunately I don't have the CD. My Netbook is a HP mini computer that comes with Windows XP home. Thank you for your help and I hope to hear from you again.

  How do you reinstall Windows?  If you have used the HP Recovery system to recover from a hidden partition, backup should have been reinstalled.

  I suggest you call HP support.

• Installation hard drive with Windows XP operating system in another computer

  Why can't I remove the hard drive with Windows XP already active and install in another computer?

  No, you need to reinstall the operating system.  However, if XP and vista came with the computer as OEM software, it cannot be legally activated.  The reason why it does not is the difference in hardware.

• FAT32 formatting for 500 GB Seagate external hard drive using Windows Vista

  How to format FAT32 file system for 500 GB Seagate external hard drive using Windows Vista?

  Hi MVRMVR,

  Windows will work generally only format a drive in FAT 32 if it has a capacity of 32GB, no more. To format in FAT32, Yes, would need to create multiple partitions. This, of course, you don't want to do.

  I have not tried to format a large drive in FAT 32 but I guess that any third-party partitioning software (Acronis, Paragon etc.) would be able to do it without any problem. Alternatively you can do it from the Windows command prompt. For more details, see the link below:

  http://www.online-tech-tips.com/computer-tips/formatting-external-hard-drive-to-FAT-32/ John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com

• Envy 17 2180el can I add a second hard drive, and then choose bios/boot of the system with which to start?

  Envy 17 2180el can I add a second hard drive, and then choose bios/boot of the system with which to start?

  in the case give me the link of a hard disk of type to add

  Hello

  While you can certainly add another HARD drive in the Bay of secondary drive (you must also support and the connection cable) you can't boot from it - only in the Bay of primary HARD drive is bootable.

  Kind regards

  DP - K