Hard drive not found after upgrade to V2

Similar Questions

• Hard drive not found - installing WXP on Equium P200

  Dear all

  I have an Equium P200 with Vista. I decided to remove vista and install windows XP. I put the XP and it goes through a verification process, I guess. At the end of the audit and after I pressed the button to install XP, I get the message "hard drive not found on this computer. Help me with as I want to install XP, my laptop?

  Concerning
  REDA

  The XP operating system could not find the HARD drive because you have not installed the Intel Matrix Storage Manager.
  It is a SATA driver is needed t install the XP.

  During the operating system installation process, you will need to press the F6 key to include the external USB FDD drive SATA driver.

  It you don t have a USB FDD drive then nLite software could be a solution.

  PS; Search this forum for similar topics, because this has already been asked several times

• Error retrieving Tecra A6 (hard drive not found. Error: F3E1000001)

  Hello
  I want to recovery my Tecra A6, but when I insert the first (of three) DVD and restart my system to get to the recovery

  Menu (when booting from the recovery DVD) just rebooted my laptop and every time I try this (very simple procedure) this

  happen again.
  That's why I tried to get it back to Win XP > Toshiba Recovery Wizard... in the first DVD in the 'BIN' folder there isn't

  a "RECOVERY.bat" batch file when I run this file will open a CMD window and checks are willing (and then the

  following text is displayed in the CMD window :)
  "
  Verification of DMI
  Verification of RAID
  Failed to initialize the raid class.
  Check the HARD disk
  End of the error
  "
  and a new window opens with the following text:
  "
  
  an error has occurred.
  Error: F3E1000001
  Hard drive not found.
  Please press [OK] to turn the computer off.
  "
  If I press OK the any immediately goes down (without shut down windows) and I have to restart.
  Also my laptop works properly my recovery DVDs sounds great, I want to just recover my system because of the speed more

  in Win XP.
  Maybe there is a new firmware for my HARD drive or an update of the BIOS so that the laptop could detect my HDD.
  In Device Manager, my HARD drive is: HTS541010G9SA00

  Wait a minute: you try to run recovery as OS installation?

  The recovery procedure must be on path:
  Turn on the laptop and press the F12 key
  When the bootable devices appear put the first media for recovery in the optical disc drive
  Choose CD/DVD media from the list and press ENTER
  Follow the menu on the screen.

• Hard drive not found error

  Hey everybody,

  My HP Pavilion G6 - 1164sa is coming up with an error "Hard drive not found" at the start up. It also makes a clicking sound. have you tried another hard drive to an old laptop in its place and the works, but because it is not the correct drivers installed for this model most things do not work. Need a solution to this? can I order a new hard drive for hp with all the drivers installed?

  Your drivers are posted on your support page > HERE

  You can order a hard drive at HP, but it will be a hard drive Virgin, as well as a new hdd retail except at much higher prices. I would like to replace the hard drive with a > hdd retail.

  If you plan to use recovery disks to reinstall Windows & software/drivers have one that is at least as large a capacity than the original, may be larger, but not smaller. If you have not written a set of recovery discs, you can usually order from HP for a small fee.

  If you can read the Windows 25-character license key attached to the bottom of the laptop there is possibility to download an ISO file, burn it to DVD and install Windows. Then you need to download your drivers on the support site. (Any size hard disk could be used with this option)

• X 51, internal hard drive not found

  SOMEONE HELP ME PLEASE

  I tried to start my Alienware X 51, but all by starting it keeps freezing and rebooting until it came to this «internal hard drive not found press F1...» Etc.  I don't know what to do someone out there please help me

  Looks like the drive may be failing intermittently. If under warranty, Dell will be replaced. Contact Dell support in your region (Singapore).

• UCS C240 M3 "hard drive not found."

  Hello world.

  I have a UCS C240 M3 for a demo with the following equipment.

  UCS C240 M3 SFF2 1x8GB 1xE5-2609 ROM55 2x650W SD RAILS

  SMARTNET 8X5XNBD UCS C240 M3 S2 Server-SFF

  E5-2609/80W 4 c/10 MB of 2.4 GHz Cache/DDR3 1066 MHz

  Rank of 8 GB DDR3-1600-MHz RDIMMS/PC3-12800/dual / 1.35v

  Power cord 250VAC 10A CEE 7/7 plug EU

  Shutter Panel UCS 2.5 inches HDD

  Heatsink for UCS C240 M3 Rack Server

  Standard height PCIe dispenser for C-series

  Low-profile PCIe dispenser for UCS

  Power 650W for C-series rack servers

  Embedded SW RAID 0, 1, 10, 5 8 ports SAS/SATA

  2U Kit rails for the UCS C-Series servers

  16 GB SD card module for servers C240

  In addition, these HD.

  300 GB, 6 GB SAS 10 K RPM SFF HDD/sled hot plug/mounted disk x 2

  I pluged the HDs to the Bay of 1 and 2, but the system says "Hard Drive not found" so it doesn't allow me all RAID configurations.

  Each LED on the HD and the server is green so aparently all is ok.

  The firmware is 1.4 (6)

  Any ideas?

  Thank you.

  Best regards

  Hello

  Please check if the cables are connect integrated RAID controller and the appropriate ports on the back plane.

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/c/HW/C240/install/RAID.html#wp1017441

  What happens when you start as an option ROM RAID controller? What is it recognizes hard drives?

  Padma

• Help format/reinstall, HARD drive not found

  Dell Dimension 8400 my brother got a horse of Trojan/bot out there and I had to do a thorough cleaning due to not being able to locate the infection and the internet company kept cutting off the Internet.

  I first tried the start of the disc and using disk relocation provided by Dell. He said "this part of the Setup program prepares Microsoft Windows XP on your computer. To set up Windows XP now, press ENTER. To repair a Win XP... Press R."

  I chose the first option and get the message: "Setup has not found hard disk units installed on your computer." And the only option (F3) is to stop smoking.

  I made a diagnosis of HD and it passes. Looking in the BIOS, it is recognised as disk 0 and also in the startup list.

  I decided that maybe there was a lock on there so I used DBAN to run a DoD wipe/format and clean the drive. So now it has to be completely formatted. I also jumped into a boot disk and performed a fdisk, but he doesn't recognize and create a partition of 8 GB to 160 GB. Hmmm, something's not right.

  Again, I'm trying to reinstall with reinstall drive and a full copy of XP that I have and you still get the "hard drive not found" error.

  The FAQ does not seem to cover this issue, but I could easily looking in the wrong places. in any case, I want to just wipe the drive and reinstall. Any suggestions?

  Message edited by Deboad on 10/25/2008 17:36
  
  

• Inspiron 1545 - hard drive replacement, new drive SATA not found 'internal hard drive not found ".

  Hi all

  I'm trying to install Win7 in an Inspiron 1545 with a new SATA hard drive that has been purchased. When I insert the disc, I get "Internal hard drive not found." I checked the drive does not appear in the BIOS, I already tried to reinstall the drive several times. In addition, I tried to load the chipset drivers, drivers SATA, etc. of the Dells, the Reader site still does not appear in the installation of the OS when starting on a DVD or in the bios.

  I do not think that there is a problem with the new drive, I plugged the new drive in another Dell laptop model and it recognizes the drive in the BIOS, also I can always start on the previous in this laptop without problem hard drive when I plug it in.

  Is there a specific driver, etc. should I use for the drive to be recognized or have other thoughts?

  It's strange - either the new HDD has a rare compatibility with your embedded controller problem (I use a 500Gbyte in my 1545 no probs)) or it is a mechanical problem. I look at the physical dimensions and compare your original hdd by the new. Watch the video (even if it's on a 1525 (similar to a 1545) and a SSD hard drive)-go to 02:20

  cs_setInnerHtml ('video_a3a3072d-f294-4bec - 85b 6 - 1eefb7b19e68', ");

• Tecra S3: SATA hard drive not recognized after XP updates

  Windows has recently completed an automatic update on a Tecra S3 equipped with a 60 GB HARD drive SATA.
  After the reboot required for updaates windows generates a BSOD.

  I've traced the error and found that the system can not find the hard drive.
  Even when I use the XP cd and restore/repair console without a hard drive is located.

  When I check the BIOS hard drive is there.
  I removed the hard drive and used an external case and determined that the hard drive works fine.

  Hello

  Tecra S3 supports RAID.
  In order to install Win XP RAID driver is needed!

  The RAID driver can be found on the European driver Toshiba page.
  It s a v 1.01.0005 for Win XP.

  You can include the RAID driver using nLite. This free tool allows you to include the RAID driver in the Win XP disc.
  Google for nLite for more details.

  Welcome them

• Aurora r4 internal hard drive not found

  I went to turn my computer on Thursday and I received a message that says, internal hard disk not found, to solve this problem try to reset the player. No bootable device. Strike F1 to retry boot, F2 to enter setup menu, F5 to enter the PSA.

  I ran PSA and all the past. I removed the internal battery to see if it would help because it worked for me in the past and it didn't this time. I don't have another hard drive.

  I also had to wipe the disk a few months before what is happening. I kept getting blue screens of death, which I thought that it was caused by a virus, the virus has been removed, reset the bios a few months after the virus has been removed I kept getting the blue screen saying that I would need a new motherboard but did not. It worked fine until it starts to me don't give no boot device.

  Any help would be greatly appreciated, I don't want to have to buy a new computer

  Both worse thanks for all the help I got it to someone for repair.

• Alienware x 51 try re-installing drive HARD drive not found

  I have an Alienware x 51 which caused me a few problems. When I turn on my computer, it shows me a black screen with the following text: "drive hard internal not found to fix this problem, try reinstalling the drive. No bootable device. Strike F1 to retry boot, F2 to enter setup Menu, F5 to enter PSA"

  F1 restarts and returns me to this screen

  When I press F2 it sends me to the installation Menu, once if I hit the ESC key and exit without saving my computer starts and allows to connect me, etc.

  I tried reinstalling the drive and finally hit a brick wall. Any thoughts?

  Hello

  Have you tried to run the PSA test? If this isn't the case, please do so to confirm if you receive errors. Also check in Bios (to access the Bios, the tap button F2 when starting) in order to confirm if the drive is detected it.

• Bluetooth device driver not found after accidental uninstall (Win7 64 bit)

  I use a Plantronics M50 bluetooth headset on my mobile, Skype etc. All troubleshooting yesterday (had a problem with the microphone volume is very low) I followed a few steps of an article if found on a Microsoft forum, telling me to uninstall the driver, as well as to restart my laptop (Win7 64 bit) would recognize and re - install the driver.

  In Device Manager, I right-click on the M50 (under audio, video and game controllers) device and chose to uninstall (as prescribed in the MS article). Here's where I shot myself in the foot; I ticked the box "Delete the driver for this device" (thinking that Win7 would get a fresh driver from Windows Update to reboot)

  After the reboot, my laptop started to reinstal the driver device, but for "Bluetooth device" reports "no driver not found"

  I myself tried in vain things:

  • tried to find the driver sur.com, but isn't available (plug-and-play)
  • installed software (incl. Plantronics Control Panel) Plantronics package
  • I tried Windows Update
  • installed Microsoft Windows Mobile Device Center 6.1 Driver (as advised on various sites to set "Bluetooth Peripheral Device" reports questions 'no driver found'

  At the hope that someone had a suggestion for what else to try, or maybe how to find out what that exactly that I deleted by choosing 'delete the driver for this device '.

  Thanks in advance!

  Edit:

  Just in case it helps, I noticed that the following folder is created at the time of uninstal and reinstal, containing calisto.inf, calisto. PNF and Calisto.cat

  C:\Windows\System32\DriverStore\FileRepository\calisto.inf_amd64_neutral_2b13d4544d6cf2e6

  I decided to use Sytem Restore to restore my system to before I uninstalled the driver. There are a few downsides to this, but so far the benefits outweigh them.

• Alienware X 51 error: internal hard drive not found...

  Hello

  Since a few days I am getting an error on the screen when I start my computer. This is the error:

  Internal hard disk not found
  to resolve this problem. try to reinstall the drive.
  No bootable device.

  Strike F1 to retry boot. F2 to enter the Setup Menu. F5 enter PSA.

  If I go into the PSA I'll get boot problems. It takes like half an hour. When it's over my computer will restart, and then boot normally I can connect and see bureablad etc. But when I shut down my pc and start it again the next morning it will start with the same error. and it happens every day.

  Many people say that you must change the start Mode of inheritance in the UEFI. But the Boot Mode was already on the UEFI.

  A photo of the boot:

  

  I hope someone can help me.

  -Jeroen

  How did you get windows 7 reinstall and make it work?

• N200 bios flashes-> hard drive not found

  I have a Lenovo 3000 N200 0769.
  I downloaded the upgrade of the bios on the Lenovo site. The laptop stood awake for a few minutes after the launch and completion of lightning with explore does not, including the flash window is complete, normally closed.
  When he started upward again, I got normal screens, finally windows XP startup screen showed, but as soon as the blue line arrived in the second or third place, the computer go to the black screen asking for a normal boot, safe mode or the configuration was last started. All these options have led to a blue error screen that was shown for only a half second that I couldn't even read the error number, then all reeboted again and I got stüch with the display of black selection again.
  When I tried to repair windows XP CD (R key), he said that I have not installed hard drives. I got the same message when I tried to reinstall XP. The bios displays the installed drive. I also tried resetting the bios, no change. I found the article on the community of lenovo on how to reset the cmos, but it seemed that I had failed, either. Anyone alse said his drive Id changed to another thing and causet problem, but does not list how to fix that.
  I don't know what else to do. I need the data on the laptop ASAP and I want to say.

  Someone on FixYa said I need to remove the cmos battery and this is supposed to be under the keyboard. I removed the keyboard, but can't seem to find the battery. Is anyone please tell me where it is? I saw all the batteries in the world and I can not find even when it is... or maybe I have gist never seen one like this yet or what?

  BIG MISTAKE! Version 3.03 of bios is not the best for this model, especially if only a few months (like mine), has made in my case 3.03 caused trouble on the events of interruption-recovery repeatedly crashes on the post. Actually recovered 3.05 bios original and questions solved all this. Later, I will put the download link. You don't need to worry about bsod, simply change the sata to ide on bios mode and windows will go up. (the provided vista can assume the two, xp requires a change of driver before)

• Portege M400 - no HARD drive not found during recovery "no found TMBR.

  Hello

  I am trying to reinstall my Toshiba Portege M400 146 provided with the original hard drive, but the recovery program will not accept that there is a record of hard work in the computer.

  I know the drive works as I have used on other computers to experiment with Windows 7, etc and in the computer Toshiba windows 7 (always on the HDD) will also begin to start, but planting them.

  The error message is that there is no record of hard work and the following text are in 2 command windows both with the title:

  X:\i386\systen32\cmd.exe

  * Error screen 1: *.

  Check the type of partition MBR
  Not FOUND: Partition ID 4 is 0x00 not 0 x 88
  Seeking the TMBR
  No found TMBR!
  Fact.

  Microsoft DiskPart version 5.2.3790.1830
  Copyright (C) 1999-2001 Microsoft Corporation.
  On computer: MININT-JUC

  Disk 0 is now the selected disk.

  Services of disk management cannot complete the operation.
  Specified drive does not exist.
  ERROR: E:\04386R01 Reco-unpacking. TPA has failed!
  Press a key to continue...

  Error screen 2:

  Manage the RAID configuration.
  # Mode GET1 F
  # Flags 0 x 00 0x00 0x00
  # Flag1 is 0x00 no 'F '!
  Get the current status of RAID...
  RAID level = compatible RAID
  Status: Optimal
  Get the number of readers...
  X:\I386\System32 > _

  I also tried with other drives and the same problem persists.

  Anyone seen the same problem and found a solution?

  Berst cordially

  Hello

  Eventually the partitions that appear on the HARD disk is corrupted.
  I couldn't install the OS on my laptop because the partitions have been confues up, I don t know why, but I couldn't format the HARD drive using the recovery disk.

  Finally, I took the Windows XP disc and formatted the whole HARD drive and deleted all partitions on the HARD drive. Then I installed Windows XP by using the Microsoft disk.
  After that, I made the recovery disc and installed the operating system using the Toshiba disc.
  Then, it was possible to reinstall the OS.

  Notes; The M400 seems supported RAID and therefore, you need to install the RAID driver first!